GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/google/nissa/var/anraggar: Add OV13B10 MIPI camera device 

Enable MIPI camera for anraggar project.

Sensor: OV13B10-GA5A
Driver: DW9714V
EEPROM: GT24P64E

Ref to SCH, use MIPI 4-lane serial output interface.

BUG=b:309518095
TEST=Google Camera app working

Checking log with:
coreboot log:
\_SB.PCI0.I2C2.CAM0: Intel MIPI Camera Device I2C address 036h
\_SB.PCI0.I2C2.VCM0: Intel MIPI Camera Device I2C address 0ch
\_SB.PCI0.I2C2.NVM0: Intel MIPI Camera Device I2C address 050h

kernel log:
kernel: [    6.140429] intel-ipu6-isys intel-ipu6-isys0: bind ov13b10 11-0036 nlanes is 4 port is 1
cros_camera_service[4755]: Read camera eeprom from /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom
cros_camera_service[4755]: Probing media device '/dev/media0'
cros_camera_service[4755]: Probing sensor 'ov13b10 11-0036' (v4l-subdev17)
cros_camera_service[4755]: Found V4L2 sensor subdev on /sys/devices/pci0000:00/0000:00:15.2/i2c_designware.2/i2c-11/i2c-OVTIDB10:00/video4linux/v4l-subdev17

Change-Id: I6a82557c94203f24449588a6005abc53cc29ca76
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79163
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arec Kao <arec.kao@intel.corp-partner.google.com>
This commit is contained in:
Weimin Wu 2023-11-17 22:12:54 +08:00 committed by Felix Held
parent b667e27952
commit fd1c2f488f
2 changed files with 27 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
src/mainboard/google/brya/variants/anraggar/gpio.c
View File

@ -32,7 +32,7 @@ static const struct pad_config override_gpio_table[] = {
/* D8 : SRCCLKREQ3# ==> SD_CLKREQ_ODL ==> NC */
PAD_NC_LOCK(GPP_D8, NONE, LOCK_CONFIG),
/* D13 : NC ==> EN_PP1800_WCAM_X */
PAD_CFG_GPO_LOCK(GPP_D13, 0, LOCK_CONFIG),
PAD_CFG_GPO_LOCK(GPP_D13, 1, LOCK_CONFIG),
/* E20 : DDP2_CTRLCLK ==> HDMI_DDC_SCL ==> NC */
PAD_NC_LOCK(GPP_E20, NONE, LOCK_CONFIG),
@ -48,7 +48,7 @@ static const struct pad_config override_gpio_table[] = {
PAD_CFG_GPO_LOCK(GPP_F11, 1, LOCK_CONFIG),
/* F12 : GSXDOUT ==> WWAN_RST_L */
PAD_CFG_GPO_LOCK(GPP_F12, 1, LOCK_CONFIG),
/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD ==> EN_PP2800_AVDD*/
/* F18 : THC1_SPI2_INT# ==> EN_PP2800_AFVDD */
PAD_CFG_GPO(GPP_F18, 0, DEEP),
/* F23 : V1P05_CTRL ==> V1P05EXT_CTRL ==> NC*/
PAD_NC_LOCK(GPP_F23, NONE, LOCK_CONFIG),

44
src/mainboard/google/brya/variants/anraggar/overridetree.cb
View File

@ -207,7 +207,7 @@ chip soc/intel/alderlake
register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
register "cio2_num_ports" = "1"
register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used
register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used
register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
register "cio2_prt[0]" = "1"
device generic 0 on end
@ -244,18 +244,17 @@ chip soc/intel/alderlake
end
device ref i2c2 on
chip drivers/intel/mipi_camera
register "acpi_hid" = ""OVTI5675""
register "acpi_hid" = ""OVTIDB10""
register "acpi_uid" = "0"
register "acpi_name" = ""CAM0""
register "chip_name" = ""Ov 5675 Camera""
register "chip_name" = ""Ov 13b10 Camera""
register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
register "ssdb.lanes_used" = "2"
register "ssdb.link_used" = "1"
register "ssdb.lanes_used" = "4"
register "ssdb.vcm_type" = "0x0C"
register "vcm_name" = ""VCM0""
register "num_freq_entries" = "1"
register "link_freq[0]" = "DEFAULT_LINK_FREQ"
register "link_freq[0]" = "560 * MHz"
register "remote_name" = ""IPU0""
register "has_power_resource" = "1"
@ -263,17 +262,16 @@ chip soc/intel/alderlake
register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X
register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1800_PP1200_WCAM_X
register "gpio_panel.gpio[0].gpio_num" = "GPP_F18" # EN_PP2800_WCAM_X
register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1200_WCAM_X
register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L
#_ON
register "on_seq.ops_cnt" = "5"
register "on_seq.ops_cnt" = "4"
register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
#_OFF
register "off_seq.ops_cnt" = "4"
@ -285,30 +283,38 @@ chip soc/intel/alderlake
device i2c 36 on end
end
chip drivers/intel/mipi_camera
register "acpi_uid" = "3"
register "acpi_uid" = "2"
register "acpi_name" = ""VCM0""
register "chip_name" = ""DW AF DAC""
register "chip_name" = ""DW9714 VCM ""
register "device_type" = "INTEL_ACPI_CAMERA_VCM"
register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
register "vcm_compat" = ""dongwoon,dw9714""
register "has_power_resource" = "1"
#Controls
register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_AFVDD
#_ON
register "on_seq.ops_cnt" = "1"
register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
#_OFF
register "off_seq.ops_cnt" = "1"
register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
device i2c 0C on end
end
chip drivers/intel/mipi_camera
register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
register "acpi_uid" = "1"
register "acpi_name" = ""NVM0""
register "chip_name" = ""GT24C08""
register "chip_name" = ""GT24P64E""
register "device_type" = "INTEL_ACPI_CAMERA_NVM"
register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
register "nvm_size" = "0x2000"
register "nvm_pagesize" = "1"
register "nvm_readonly" = "1"
register "nvm_width" = "0x10"
register "nvm_compat" = ""atmel,24c08""
register "nvm_compat" = ""atmel,24c64""
device i2c 50 on end
end