diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md index b55876016a..3260f73484 100644 --- a/Documentation/mainboard/index.md +++ b/Documentation/mainboard/index.md @@ -176,6 +176,7 @@ The boards in this section are not real mainboards, but emulators. ## System76 - [Lemur Pro](system76/lemp9.md) +- [Oryx Pro 5](system76/oryp5.md) ## Texas Instruments diff --git a/Documentation/mainboard/system76/oryp5.md b/Documentation/mainboard/system76/oryp5.md new file mode 100644 index 0000000000..662581cf18 --- /dev/null +++ b/Documentation/mainboard/system76/oryp5.md @@ -0,0 +1,71 @@ +# System76 Oryx Pro 5 (oryp5) + +## Specs + +- CPU + - Intel Core i7-8750H + - Intel Core i7-9750H +- EC + - ITE8587E running https://github.com/system76/ec +- Graphics + - Intel UHD Graphics 630 + - NVIDIA GeForce RTX 2080/2070/2060 + - eDP 16.1" or 17.3" 1920x1080 @ 144 Hz LCD + - HDMI, Mini DisplayPort 1.3, and DisplayPort 1.3 over USB-C +- Memory + - Channel 0: 8-GB/16-GB/32-GB DDR4 SO-DIMM + - Channel 1: 8-GB/16-GB/32-GB DDR4 SO-DIMM +- Networking + - Gigabit Ethernet + - Intel Dual Band Wireless-AC 9560 Wireless LAN (802.11ac) + Bluetooth +- Power + - 180W (19.5V, 9.23A) AC adapter + - 62Wh 4-cell battery +- Sound + - Realtek ALC1220 codec + - TAS5825MRHBR smart AMP + - Internal speakers and microphone + - Combined headphone and microphone 3.5mm jack + - Combined microphone and S/PDIF 3.5mm jack + - HDMI, Mini DisplayPort, USB-C DP audio +- Storage + - M.2 PCIe/SATA SSD1 + - M.2 PCIe/SATA SSD2 + - 2.5" SATA HDD/SSD + - RTS5250 SD card reader +- USB + - 2x USB 3.1 Gen2 Type-C + - 2x USB 3.1 Gen1 Type-A + +## Building coreboot + +```bash +make distclean +make defconfig KBUILD_DEFCONFIG=configs/config.system76_oryp5 +make +``` + +## Flashing coreboot + +```eval_rst ++---------------------+---------------------+ +| Type | Value | ++=====================+=====================+ +| Socketed flash | no | ++---------------------+---------------------+ +| Vendor | GigaDevice | ++---------------------+---------------------+ +| Model | GD25Q127C/GD25Q128C | ++---------------------+---------------------+ +| Size | 16 MiB | ++---------------------+---------------------+ +| Package | SOIC-8 | ++---------------------+---------------------+ +| Internal flashing | yes | ++---------------------+---------------------+ +| External flashing | yes | ++---------------------+---------------------+ +``` + +External flashing via ISP requires removing the board from the chassis. +The IC is located under the touchpad. diff --git a/configs/config.system76_oryp5 b/configs/config.system76_oryp5 new file mode 100644 index 0000000000..eeba2945e1 --- /dev/null +++ b/configs/config.system76_oryp5 @@ -0,0 +1,6 @@ +CONFIG_VENDOR_SYSTEM76=y +CONFIG_BOARD_SYSTEM76_ORYP5=y +CONFIG_PAYLOAD_TIANOCORE=y +CONFIG_POST_IO=n +CONFIG_RUN_FSP_GOP=y +CONFIG_SMMSTORE=y diff --git a/src/mainboard/system76/oryp5/Kconfig b/src/mainboard/system76/oryp5/Kconfig new file mode 100644 index 0000000000..6dcdbbf43e --- /dev/null +++ b/src/mainboard/system76/oryp5/Kconfig @@ -0,0 +1,71 @@ +if BOARD_SYSTEM76_ORYP5 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_16384 + select DRIVERS_I2C_HID + select EC_SYSTEM76_EC + select EC_SYSTEM76_EC_BAT_THRESHOLDS + select EC_SYSTEM76_EC_COLOR_KEYBOARD + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_GMA_HAVE_VBT + select INTEL_LPSS_UART_FOR_CONSOLE + select MAINBOARD_HAS_LPC_TPM + select MAINBOARD_HAS_TPM2 + select NO_UART_ON_SUPERIO + select SOC_INTEL_CANNONLAKE_PCH_H + select SOC_INTEL_COFFEELAKE + select SOC_INTEL_COMMON_BLOCK_HDA_VERB + select SPD_READ_BY_WORD + select SYSTEM_TYPE_LAPTOP + +config MAINBOARD_DIR + string + default "system76/oryp5" + +config MAINBOARD_PART_NUMBER + string + default "oryp5" + +config MAINBOARD_SMBIOS_PRODUCT_NAME + string + default "Oryx Pro" + +config MAINBOARD_VERSION + string + default "oryp5" + +config CBFS_SIZE + hex + default 0xA00000 + +config CONSOLE_POST + bool + default y + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config UART_FOR_CONSOLE + int + default 2 + +config MAX_CPUS + int + default 12 + +config DIMM_MAX + int + default 2 + +config DIMM_SPD_SIZE + int + default 512 + +config POST_DEVICE + bool + default n + +endif diff --git a/src/mainboard/system76/oryp5/Kconfig.name b/src/mainboard/system76/oryp5/Kconfig.name new file mode 100644 index 0000000000..37221de9eb --- /dev/null +++ b/src/mainboard/system76/oryp5/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_SYSTEM76_ORYP5 + bool "oryp5" diff --git a/src/mainboard/system76/oryp5/Makefile.inc b/src/mainboard/system76/oryp5/Makefile.inc new file mode 100644 index 0000000000..83ef3a5ca8 --- /dev/null +++ b/src/mainboard/system76/oryp5/Makefile.inc @@ -0,0 +1,8 @@ +CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/include + +bootblock-y += bootblock.c +bootblock-y += gpio_early.c + +ramstage-y += ramstage.c +ramstage-y += gpio.c +ramstage-y += hda_verb.c diff --git a/src/mainboard/system76/oryp5/acpi/gpe.asl b/src/mainboard/system76/oryp5/acpi/gpe.asl new file mode 100644 index 0000000000..81022642e4 --- /dev/null +++ b/src/mainboard/system76/oryp5/acpi/gpe.asl @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +// GPP_B23 SCI +Method (_L17, 0, Serialized) +{ + Debug = Concatenate("GPE _L17: ", ToHexString(\_SB.PCI0.LPCB.EC0.WFNO)) + If (\_SB.PCI0.LPCB.EC0.ECOK) { + If (\_SB.PCI0.LPCB.EC0.WFNO == 1) { + Notify(\_SB.LID0, 0x80) + } + } +} diff --git a/src/mainboard/system76/oryp5/acpi/mainboard.asl b/src/mainboard/system76/oryp5/acpi/mainboard.asl new file mode 100644 index 0000000000..a319ae627c --- /dev/null +++ b/src/mainboard/system76/oryp5/acpi/mainboard.asl @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#define EC_GPE_SCI 0x17 /* GPP_B23 */ +#define EC_GPE_SWI 0x26 /* GPP_G6 */ +#define EC_COLOR_KEYBOARD 1 +#include + +Scope (\_SB) +{ + #include "sleep.asl" +} + +Scope (\_GPE) +{ + #include "gpe.asl" +} diff --git a/src/mainboard/system76/oryp5/acpi/sleep.asl b/src/mainboard/system76/oryp5/acpi/sleep.asl new file mode 100644 index 0000000000..f2b194c422 --- /dev/null +++ b/src/mainboard/system76/oryp5/acpi/sleep.asl @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* Method called from _PTS prior to enter sleep state */ +Method (MPTS, 1) +{ + \_SB.PCI0.LPCB.EC0.PTS (Arg0) +} + +/* Method called from _WAK prior to wakeup */ +Method (MWAK, 1) +{ + \_SB.PCI0.LPCB.EC0.WAK (Arg0) +} diff --git a/src/mainboard/system76/oryp5/board_info.txt b/src/mainboard/system76/oryp5/board_info.txt new file mode 100644 index 0000000000..91e8d032d6 --- /dev/null +++ b/src/mainboard/system76/oryp5/board_info.txt @@ -0,0 +1,8 @@ +Vendor name: System76 +Board name: oryp5 +Category: laptop +Release year: 2019 +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/system76/oryp5/bootblock.c b/src/mainboard/system76/oryp5/bootblock.c new file mode 100644 index 0000000000..ae416b4e77 --- /dev/null +++ b/src/mainboard/system76/oryp5/bootblock.c @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include + +void bootblock_mainboard_early_init(void) +{ + mainboard_configure_early_gpios(); +} diff --git a/src/mainboard/system76/oryp5/data.vbt b/src/mainboard/system76/oryp5/data.vbt new file mode 100644 index 0000000000..e41aba6d11 Binary files /dev/null and b/src/mainboard/system76/oryp5/data.vbt differ diff --git a/src/mainboard/system76/oryp5/devicetree.cb b/src/mainboard/system76/oryp5/devicetree.cb new file mode 100644 index 0000000000..6cf5c94ea8 --- /dev/null +++ b/src/mainboard/system76/oryp5/devicetree.cb @@ -0,0 +1,203 @@ +chip soc/intel/cannonlake + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + // Touchpad I2C bus + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 80, + .fall_time_ns = 110, + }, + }" + +# CPU (soc/intel/cannonlake/cpu.c) + # Power limit + register "power_limits_config" = "{ + .tdp_pl1_override = 45, + .tdp_pl2_override = 78, + }" + + # Enable Enhanced Intel SpeedStep + register "eist_enable" = "1" + +# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c) + register "enable_c6dram" = "1" + +# FSP Silicon (soc/intel/cannonlake/fsp_params.c) + # Serial I/O + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, // Touchpad I2C bus + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexUART2] = PchSerialIoPci, // Debug console + }" + + # Misc + register "AcousticNoiseMitigation" = "1" + + # Power + register "PchPmSlpS3MinAssert" = "3" # 50ms + register "PchPmSlpS4MinAssert" = "1" # 1s + register "PchPmSlpSusMinAssert" = "4" # 4s + register "PchPmSlpAMinAssert" = "4" # 2s + + # Thermal + register "tcc_offset" = "13" + + # Serial IRQ Continuous + register "serirq_mode" = "SERIRQ_CONTINUOUS" + +# PM Util (soc/intel/cannonlake/pmutil.c) + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "PMC_GPP_B" + register "gpe0_dw1" = "PMC_GPP_G" + register "gpe0_dw2" = "PMC_GPP_E" + +# Actual device tree + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + subsystemid 0x1558 0x95e6 inherit + device pci 00.0 on end # Host Bridge + device pci 01.0 on # GPU Port + # PCI Express Graphics #0 x16, Clock 8 (NVIDIA GPU) + register "PcieClkSrcUsage[8]" = "0x40" + register "PcieClkSrcClkReq[8]" = "8" + end + device pci 02.0 on # Integrated Graphics Device + register "gfx" = "GMA_DEFAULT_PANEL(0)" + end + device pci 04.0 on # SA Thermal device + register "Device4Enable" = "1" + end + device pci 12.0 on end # Thermal Subsystem + device pci 12.5 off end # UFS SCS + device pci 12.6 off end # GSPI #2 + device pci 13.0 off end # Integrated Sensor Hub + device pci 14.0 on # USB xHCI + # USB2 + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C/DP + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # USB 3 Right + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # USB 3 Left + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Per-key RGB + register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # 3G/LTE + register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Camera + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Fingerprint + register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" # WLAN/Bluetooth + # USB3 + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C/DP + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3 Right + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3 Left + register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)" # 3G/LTE + end + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Shared SRAM + device pci 14.3 on # CNVi wifi + #chip drivers/intel/wifi + # register "wake" = "PME_B0_EN_BIT" + #end + end + device pci 14.5 off end # SDCard + device pci 15.0 on # I2C #0 + # I2C HID not supported on PNP0f13 + end + device pci 15.1 on end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 off end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 16.5 off end # Management Engine Interface 4 + device pci 17.0 on # SATA + register "SataPortsEnable[1]" = "1" # SSD (SATA1A) + register "SataPortsEnable[4]" = "1" # HDD (SATA4) + end + device pci 19.0 off end # I2C #4 + device pci 19.1 off end # I2C #5 + device pci 19.2 on end # UART #2 + device pci 1a.0 off end # eMMC + device pci 1b.0 off end # PCI Express Port 17 + device pci 1b.1 off end # PCI Express Port 18 + device pci 1b.2 off end # PCI Express Port 19 + device pci 1b.3 off end # PCI Express Port 20 + device pci 1b.4 on # PCI Express Port 21 + # PCI Express root port #21 x4, Clock 11 (SSD2) + register "PcieRpEnable[20]" = "1" + register "PcieRpLtrEnable[20]" = "1" + register "PcieClkSrcUsage[11]" = "20" + register "PcieClkSrcClkReq[11]" = "11" + end + device pci 1b.5 off end # PCI Express Port 22 + device pci 1b.6 off end # PCI Express Port 23 + device pci 1b.7 off end # PCI Express Port 24 + device pci 1c.0 off end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on # PCI Express Port 9 + # PCI Express root port #9 x4, Clock 12 (SSD) + register "PcieRpEnable[8]" = "1" + register "PcieRpLtrEnable[8]" = "1" + register "PcieClkSrcUsage[12]" = "8" + register "PcieClkSrcClkReq[12]" = "12" + end + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1d.4 off end # PCI Express Port 13 + device pci 1d.5 on # PCI Express Port 14 + # PCI Express root port #14 x1, Clock 13 (WLAN) + register "PcieRpEnable[13]" = "1" + register "PcieRpLtrEnable[13]" = "1" + register "PcieClkSrcUsage[13]" = "13" + register "PcieClkSrcClkReq[13]" = "13" + end + device pci 1d.6 on # PCI Express Port 15 + # PCI Express root port #15 x1, Clock 14 (GLAN) + register "PcieRpEnable[14]" = "1" + register "PcieRpLtrEnable[14]" = "1" + register "PcieClkSrcUsage[14]" = "14" + register "PcieClkSrcClkReq[14]" = "14" + end + device pci 1d.7 on # PCI Express Port 16 + # PCI Express root port #16 x1, Clock 15 (Card Reader) + register "PcieRpEnable[15]" = "1" + register "PcieRpLtrEnable[15]" = "1" + register "PcieClkSrcUsage[15]" = "15" + register "PcieClkSrcClkReq[15]" = "15" + end + device pci 1e.0 off end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1f.0 on # LPC Interface + register "gen1_dec" = "0x000c0081" + register "gen2_dec" = "0x00040069" + register "gen3_dec" = "0x00fc0e01" + register "gen4_dec" = "0x00fc0f01" + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + end + device pci 1f.1 off end # P2SB + device pci 1f.2 off end # Power Management Controller + device pci 1f.3 on # Intel HDA + subsystemid 0x1558 0x96e1 + register "PchHdaAudioLinkHda" = "1" + end + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/system76/oryp5/dsdt.asl b/src/mainboard/system76/oryp5/dsdt.asl new file mode 100644 index 0000000000..3261c5994b --- /dev/null +++ b/src/mainboard/system76/oryp5/dsdt.asl @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +DefinitionBlock( + "dsdt.aml", + "DSDT", + ACPI_DSDT_REV_2, + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 /* OEM revision */ +) +{ + #include + #include + #include + + Device (\_SB.PCI0) + { + #include + #include + #include + } + + #include + + Scope (\_SB.PCI0.LPCB) + { + #include + } + + #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/system76/oryp5/gpio.c b/src/mainboard/system76/oryp5/gpio.c new file mode 100644 index 0000000000..15e19617ba --- /dev/null +++ b/src/mainboard/system76/oryp5/gpio.c @@ -0,0 +1,268 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include + +static const struct pad_config gpio_table[] = { + /* ------- GPIO Group GPD ------- */ + PAD_CFG_NF(GPD0, NONE, DEEP, NF1), // PM_BATLOW# + PAD_CFG_NF(GPD1, NATIVE, DEEP, NF1), // AC_PRESENT + PAD_CFG_GPI(GPD2, NATIVE, PWROK), // LAN_WAKEUP# + PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1), // PWR_BTN# + PAD_CFG_NF(GPD4, NONE, DEEP, NF1), // SUSB#_PCH + PAD_CFG_NF(GPD5, NONE, DEEP, NF1), // SUSC#_PCH + PAD_NC(GPD6, UP_20K), + PAD_CFG_GPI(GPD7, UP_20K, PWROK), /* GPD_7 (crystal input + low = single ended, + high = differential) + */ + PAD_CFG_NF(GPD8, NONE, DEEP, NF1), // PCH_SUSCLK + PAD_NC(GPD9, UP_20K), + PAD_NC(GPD10, UP_20K), + PAD_CFG_TERM_GPO(GPD11, 1, NONE, DEEP), // LAN_DISABLE# + + /* ------- GPIO Group GPP_A ------- */ + PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1), // SB_KBCRST# + PAD_CFG_NF(GPP_A1, NONE, DEEP, NF1), // LPC_AD0 + PAD_CFG_NF(GPP_A2, NONE, DEEP, NF1), // LPC_AD1 + PAD_CFG_NF(GPP_A3, NONE, DEEP, NF1), // LPC_AD2 + PAD_CFG_NF(GPP_A4, NONE, DEEP, NF1), // LPC_AD3 + PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), // LPC_FRAME# + PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), // SERIRQ + PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1), // LPC_PIRQA# + PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), // PM_CLKRUN# + PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1), // PCLK_KBC + PAD_NC(GPP_A10, UP_20K), + PAD_CFG_GPI_APIC_HIGH(GPP_A11, NONE, PLTRST), // INTP_OUT + PAD_NC(GPP_A12, UP_20K), + PAD_NC(GPP_A13, UP_20K), // SUSWARN# (test point) + PAD_NC(GPP_A14, UP_20K), // (test point) + PAD_NC(GPP_A15, UP_20K), // SUS_PWR_ACK# (test point) + PAD_NC(GPP_A16, UP_20K), + PAD_NC(GPP_A17, UP_20K), + PAD_NC(GPP_A18, UP_20K), + PAD_CFG_TERM_GPO(GPP_A19, 1, NONE, DEEP), // SB_BLON + PAD_CFG_GPI(GPP_A20, NONE, DEEP), // PEX_WAKE# + PAD_NC(GPP_A21, UP_20K), + PAD_CFG_TERM_GPO(GPP_A22, 1, NONE, DEEP), // WLAN_SSD2_GPIO1 + PAD_CFG_TERM_GPO(GPP_A23, 1, NONE, DEEP), // WLAN_SSD2_GPIO + + /* ------- GPIO Group GPP_B ------- */ + PAD_CFG_GPI(GPP_B0, UP_20K, DEEP), // TPM_PIRQ# + PAD_NC(GPP_B1, UP_20K), + PAD_NC(GPP_B2, UP_20K), + PAD_CFG_TERM_GPO(GPP_B3, 1, NONE, DEEP), // BT_RF_KILL_R_N + PAD_CFG_TERM_GPO(GPP_B4, 1, NONE, DEEP), // WIFI_RF_KILL_R_N + PAD_NC(GPP_B5, UP_20K), + PAD_NC(GPP_B6, UP_20K), + PAD_CFG_TERM_GPO(GPP_B7, 1, NONE, PLTRST), // CR_GPIO_RST# + PAD_CFG_TERM_GPO(GPP_B8, 1, NONE, PLTRST), // CR_GPIO_WAKE# + PAD_NC(GPP_B9, UP_20K), + PAD_NC(GPP_B10, UP_20K), + PAD_NC(GPP_B11, UP_20K), + PAD_CFG_GPI(GPP_B12, UP_20K, DEEP), // SLP_S0# + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), // PLT_RST# + PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1), // PCH_SPKR + PAD_NC(GPP_B15, UP_20K), + PAD_NC(GPP_B16, UP_20K), + PAD_NC(GPP_B17, UP_20K), + PAD_NC(GPP_B18, UP_20K), // LPSS_GSPI0_MOSI (test point) + PAD_NC(GPP_B19, UP_20K), + PAD_CFG_GPI_SMI(GPP_B20, NONE, DEEP, EDGE_SINGLE, NONE), // SMI# + PAD_NC(GPP_B21, UP_20K), + PAD_CFG_GPI(GPP_B22, UP_20K, DEEP), // LPSS_GSPI1_MOSI + PAD_CFG_GPI_SCI_LOW(GPP_B23, UP_20K, PLTRST, LEVEL), // SCI# + + /* ------- GPIO Group GPP_C ------- */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), // SMB_CLK + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), // SMB_DATA + PAD_CFG_GPI(GPP_C2, UP_20K, DEEP), // GPP_C2_BT_UART_WAKE_N + PAD_NC(GPP_C3, UP_20K), + PAD_NC(GPP_C4, UP_20K), + PAD_CFG_GPI(GPP_C5, UP_20K, DEEP), // M.2_WLAN_WIFI_WAKE_N + PAD_CFG_GPI(GPP_C6, UP_20K, DEEP), // SMC_CPU_THERM + PAD_CFG_GPI(GPP_C7, UP_20K, DEEP), // SMD_CPU_THERM + PAD_CFG_GPI(GPP_C8, NONE, DEEP), // TPM_DET + PAD_CFG_GPI(GPP_C9, DN_20K, DEEP), // BOARD_ID1 + PAD_CFG_GPI(GPP_C10, DN_20K, DEEP), // BOARD_ID2 + PAD_CFG_GPI(GPP_C11, DN_20K, DEEP), // BOARD_ID3 + PAD_CFG_GPI(GPP_C12, NONE, DEEP), // GC6_FB_EN_PCH + PAD_CFG_TERM_GPO(GPP_C13, 1, NONE, DEEP), // GPU_EVENT# + PAD_CFG_TERM_GPO(GPP_C14, 1, NONE, DEEP), // M.2_PLT_RST_CNTRL1# + PAD_CFG_TERM_GPO(GPP_C15, 1, NONE, DEEP), // M.2_PLT_RST_CNTRL2# + PAD_CFG_NF(GPP_C16, NONE, PLTRST, NF1), // I2C_SDA_TP + PAD_CFG_NF(GPP_C17, NONE, PLTRST, NF1), // I2C_SCL_TP + PAD_CFG_NF(GPP_C18, NONE, PLTRST, NF1), // SMD_7411_I2C + PAD_CFG_NF(GPP_C19, NONE, PLTRST, NF1), // SMC_7411_I2C + //PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), // UART2_RXD + //PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), // UART2_TXD + PAD_CFG_NF(GPP_C22, UP_20K, DEEP, NF1), // UART2_RTS# / LAN_PLT_RST# + PAD_CFG_NF(GPP_C23, UP_20K, DEEP, NF1), // BOARD_ID4 + + /* ------- GPIO Group GPP_D ------- */ + PAD_NC(GPP_D0, UP_20K), + PAD_NC(GPP_D1, UP_20K), + PAD_NC(GPP_D2, UP_20K), + PAD_NC(GPP_D3, UP_20K), + PAD_NC(GPP_D4, UP_20K), + PAD_CFG_NF(GPP_D5, NONE, DEEP, NF3), // M.2_BT_PCMFRM_CRF_RST_N + PAD_CFG_NF(GPP_D6, NONE, DEEP, NF3), // M.2_BT_PCMOUT_CLKREQ0 + PAD_CFG_GPI(GPP_D7, UP_20K, DEEP), // M.2_BT_PCMIN + PAD_CFG_GPI(GPP_D8, UP_20K, DEEP), // M.2_BT_PCMCLK + PAD_NC(GPP_D9, UP_20K), + PAD_NC(GPP_D10, UP_20K), + PAD_NC(GPP_D11, UP_20K), + PAD_NC(GPP_D12, UP_20K), + PAD_NC(GPP_D13, NONE), // 10k pull up + PAD_NC(GPP_D14, NONE), // 10k pull up + PAD_NC(GPP_D15, UP_20K), + PAD_NC(GPP_D16, UP_20K), + PAD_NC(GPP_D17, UP_20K), + PAD_NC(GPP_D18, UP_20K), + PAD_NC(GPP_D19, UP_20K), + PAD_NC(GPP_D20, UP_20K), + PAD_NC(GPP_D21, UP_20K), + PAD_NC(GPP_D22, UP_20K), + PAD_NC(GPP_D23, UP_20K), + + /* ------- GPIO Group GPP_E ------- */ + PAD_NC(GPP_E0, UP_20K), + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), // M.2_SSD1_PEDET + PAD_NC(GPP_E2, UP_20K), + PAD_NC(GPP_E3, UP_20K), + PAD_NC(GPP_E4, UP_20K), + PAD_CFG_GPI(GPP_E5, UP_20K, DEEP), // M2_P0_SATA_DEVSLP + PAD_NC(GPP_E6, UP_20K), + PAD_CFG_GPI_APIC_EDGE_LOW(GPP_E7, NONE, PLTRST), // TP_ATTN# + PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1), // PCH_SATAHDD_LED# + PAD_NC(GPP_E9, UP_20K), // USB_OC0# (test point) + PAD_NC(GPP_E10, UP_20K), // USB_OC1# (test point) + PAD_NC(GPP_E11, UP_20K), // USB_OC2# (test point) + PAD_NC(GPP_E12, UP_20K), // USB_OC3# (test point) + + /* ------- GPIO Group GPP_F ------- */ + PAD_NC(GPP_F0, UP_20K), + PAD_CFG_NF(GPP_F1, NONE, DEEP, NF1), // M.2_SSD2_PEDET + PAD_NC(GPP_F2, UP_20K), + PAD_NC(GPP_F3, UP_20K), + PAD_NC(GPP_F4, UP_20K), + PAD_NC(GPP_F5, UP_20K), + PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1), // M2_P4_SATA_DEVSLP + PAD_NC(GPP_F7, UP_20K), + PAD_NC(GPP_F8, UP_20K), + PAD_NC(GPP_F9, UP_20K), + PAD_CFG_GPI(GPP_F10, UP_20K, DEEP), // BIOS_REC + PAD_CFG_GPI(GPP_F11, UP_20K, DEEP), // GPP_F11 + PAD_NC(GPP_F12, UP_20K), + PAD_CFG_GPI(GPP_F13, UP_20K, DEEP), // GP39_GFX_CRB_DETECT + PAD_CFG_GPI(GPP_F14, UP_20K, DEEP), // H_SKTOCC_N + PAD_NC(GPP_F15, UP_20K), // USB_OC4# (test point) + PAD_NC(GPP_F16, UP_20K), + PAD_NC(GPP_F17, UP_20K), + PAD_NC(GPP_F18, UP_20K), // USB_OC7# (test point) + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), // NB_ENAVDD + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), // BLON + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), // EDP_BRIGHTNESS + PAD_CFG_TERM_GPO(GPP_F22, 0, NONE, DEEP), // DGPU_RST#_PCH + PAD_CFG_TERM_GPO(GPP_F23, 0, NONE, DEEP), // DGPU_PWR_EN + + /* ------- GPIO Group GPP_G ------- */ + PAD_NC(GPP_G0, UP_20K), + PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1), // CNVI_WIGIG_DET# + PAD_NC(GPP_G2, UP_20K), + PAD_NC(GPP_G3, UP_20K), + PAD_NC(GPP_G4, UP_20K), + PAD_NC(GPP_G5, UP_20K), + PAD_CFG_GPI_SCI_LOW(GPP_G6, NONE, DEEP, LEVEL), // SWI# + PAD_NC(GPP_G7, UP_20K), + + /* ------- GPIO Group GPP_H ------- */ + PAD_NC(GPP_H0, UP_20K), + PAD_NC(GPP_H1, UP_20K), + PAD_CFG_NF(GPP_H2, NONE, DEEP, NF1), // CLK_REQ9_PEG# + PAD_NC(GPP_H3, UP_20K), + PAD_NC(GPP_H4, UP_20K), + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), // CLK_REQ12_SSD2# + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), // CLK_REQ13_SSD1# + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), // GPP_H_0_SRCCLKREQB_14 + PAD_CFG_NF(GPP_H8, NONE, DEEP, NF1), // CLK_REQ15_LAN# + PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1), // CLK_REQ16_CARD# + PAD_NC(GPP_H10, UP_20K), + PAD_NC(GPP_H11, UP_20K), + PAD_NC(GPP_H12, UP_20K), // GPP_H_12 (test point) + PAD_NC(GPP_H13, UP_20K), + PAD_NC(GPP_H14, UP_20K), + PAD_NC(GPP_H15, NONE), // GPP_H15 (reserved) + PAD_NC(GPP_H16, UP_20K), + PAD_NC(GPP_H17, UP_20K), + PAD_NC(GPP_H18, UP_20K), + PAD_CFG_GPI(GPP_H19, UP_20K, DEEP), // GPIO_CARD1 + PAD_CFG_GPI(GPP_H20, UP_20K, DEEP), // GPIO_CARD + PAD_CFG_GPI(GPP_H21, DN_20K, DEEP), // 4.7k pull up, 20k pull down + PAD_NC(GPP_H22, UP_20K), + PAD_NC(GPP_H23, UP_20K), + + /* ------- GPIO Group GPP_I ------- */ + PAD_CFG_GPI_SCI_LOW(GPP_I0, NONE, DEEP, EDGE_BOTH), // G_DP_DHPD_A + PAD_CFG_GPI_SCI_LOW(GPP_I1, NONE, DEEP, EDGE_BOTH), // HDMI_HPD + PAD_CFG_GPI_SCI_LOW(GPP_I2, NONE, DEEP, EDGE_BOTH), // G_DP_DHPD_E + PAD_NC(GPP_I3, UP_20K), + PAD_CFG_NF(GPP_I4, NONE, DEEP, NF1), // EDP_HDP + PAD_NC(GPP_I5, UP_20K), + PAD_NC(GPP_I6, UP_20K), + PAD_NC(GPP_I7, UP_20K), + PAD_NC(GPP_I8, UP_20K), + PAD_NC(GPP_I9, UP_20K), + PAD_NC(GPP_I10, UP_20K), + PAD_CFG_GPI(GPP_I11, UP_20K, DEEP), // H_SKTOCC_N + PAD_CFG_TERM_GPO(GPP_I12, 1, NONE, DEEP), // SATA_PWR_EN + PAD_NC(GPP_I13, UP_20K), + PAD_NC(GPP_I14, UP_20K), + + /* ------- GPIO Group GPP_J ------- */ + PAD_CFG_NF(GPP_J0, NONE, DEEP, NF1), // CNVI_GNSS_PA_BLANKING + PAD_CFG_TERM_GPO(GPP_J1, 1, NONE, DEEP), // GPP_J1 + PAD_NC(GPP_J2, UP_20K), + PAD_NC(GPP_J3, UP_20K), + PAD_CFG_NF(GPP_J4, NONE, DEEP, NF1), // M.2_CNV_VRI_DT_BT_UART0_RTS + PAD_CFG_NF(GPP_J5, UP_20K, DEEP, NF1), // M.2_CNV_BRI_RSP + PAD_CFG_NF(GPP_J6, NONE, DEEP, NF1), // M.2_CNV_RGI_DT_BT_UART0_TX + PAD_CFG_NF(GPP_J7, UP_20K, DEEP, NF1), // M.2_CNV_RGI_RSP + PAD_NC(GPP_J8, UP_20K), + PAD_CFG_GPI(GPP_J9, UP_20K, DEEP), // CNVI_MFUART2_TXD + PAD_NC(GPP_J10, UP_20K), + PAD_NC(GPP_J11, UP_20K), + + /* ------- GPIO Group GPP_K ------- */ + PAD_NC(GPP_K0, UP_20K), + PAD_NC(GPP_K1, UP_20K), + PAD_NC(GPP_K2, UP_20K), + PAD_NC(GPP_K3, UP_20K), + PAD_NC(GPP_K4, UP_20K), + PAD_NC(GPP_K5, UP_20K), + PAD_NC(GPP_K6, UP_20K), + PAD_NC(GPP_K7, UP_20K), + PAD_CFG_TERM_GPO(GPP_K8, 1, NONE, DEEP), // SATA_M2_PWR_EN1 + PAD_CFG_TERM_GPO(GPP_K9, 1, NONE, DEEP), // SATA_M2_PWR_EN2 + PAD_NC(GPP_K10, UP_20K), + PAD_NC(GPP_K11, UP_20K), + PAD_NC(GPP_K12, UP_20K), + PAD_NC(GPP_K13, UP_20K), + // GPP_K_14_GSXDIN (test point), 7411_TEST_R + PAD_CFG_TERM_GPO(GPP_K14, 0, UP_20K, DEEP), + PAD_NC(GPP_K15, UP_20K), + PAD_NC(GPP_K16, UP_20K), + PAD_NC(GPP_K17, UP_20K), + PAD_NC(GPP_K18, UP_20K), + PAD_NC(GPP_K19, UP_20K), + PAD_NC(GPP_K20, UP_20K), + PAD_NC(GPP_K21, UP_20K), + PAD_NC(GPP_K22, UP_20K), + PAD_NC(GPP_K23, UP_20K), +}; + +void mainboard_configure_gpios(void) +{ + gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); +} diff --git a/src/mainboard/system76/oryp5/gpio_early.c b/src/mainboard/system76/oryp5/gpio_early.c new file mode 100644 index 0000000000..80f37c6553 --- /dev/null +++ b/src/mainboard/system76/oryp5/gpio_early.c @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include + +static const struct pad_config early_gpio_table[] = { + PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), // UART2_RXD + PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), // UART2_TXD +}; + +void mainboard_configure_early_gpios(void) +{ + gpio_configure_pads(early_gpio_table, ARRAY_SIZE(early_gpio_table)); +} diff --git a/src/mainboard/system76/oryp5/hda_verb.c b/src/mainboard/system76/oryp5/hda_verb.c new file mode 100644 index 0000000000..a8e4abbad4 --- /dev/null +++ b/src/mainboard/system76/oryp5/hda_verb.c @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const u32 cim_verb_data[] = { + /* Realtek, ALC1220 */ + 0x10ec1220, /* Vendor ID */ + 0x155896e1, /* Subsystem ID */ + 12, /* Number of entries */ + AZALIA_SUBVENDOR(0, 0x155896e1), + AZALIA_PIN_CFG(0, 0x12, 0x90a60140), // DMIC + AZALIA_PIN_CFG(0, 0x14, 0x0421101f), // FRONT (Port-D) + AZALIA_PIN_CFG(0, 0x15, 0x40000000), // SURR (Port-A) + AZALIA_PIN_CFG(0, 0x16, 0x411111f0), // CENTER/LFE (Port-G) + AZALIA_PIN_CFG(0, 0x17, 0x411111f0), // SIDE (Port-H) + AZALIA_PIN_CFG(0, 0x18, 0x04a11050), // MIC1 (Port-B) + AZALIA_PIN_CFG(0, 0x19, 0x411111f0), // MIC2 (Port-F) + AZALIA_PIN_CFG(0, 0x1a, 0x411111f0), // LINE1 (Port-C) + AZALIA_PIN_CFG(0, 0x1b, 0x90170110), // LINE2 (Port-E) + AZALIA_PIN_CFG(0, 0x1d, 0x40b7952d), // PCBEEP + AZALIA_PIN_CFG(0, 0x1e, 0x04451130), // S/PDIF-OUT +}; + +const u32 pc_beep_verbs[] = { + // Enable DMIC microphone on ALC1220 + 0x02050036, + 0x02042a6a, +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/system76/oryp5/include/mainboard/gpio.h b/src/mainboard/system76/oryp5/include/mainboard/gpio.h new file mode 100644 index 0000000000..c6393beebb --- /dev/null +++ b/src/mainboard/system76/oryp5/include/mainboard/gpio.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +void mainboard_configure_early_gpios(void); +void mainboard_configure_gpios(void); + +#endif diff --git a/src/mainboard/system76/oryp5/ramstage.c b/src/mainboard/system76/oryp5/ramstage.c new file mode 100644 index 0000000000..43ee54f50a --- /dev/null +++ b/src/mainboard/system76/oryp5/ramstage.c @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include + +static void mainboard_init(void *chip_info) +{ + mainboard_configure_gpios(); +} + +struct chip_operations mainboard_ops = { + .init = mainboard_init, +}; diff --git a/src/mainboard/system76/oryp5/romstage.c b/src/mainboard/system76/oryp5/romstage.c new file mode 100644 index 0000000000..455a2bb919 --- /dev/null +++ b/src/mainboard/system76/oryp5/romstage.c @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include + +static const struct cnl_mb_cfg memcfg = { + .spd[0] = { + .read_type = READ_SMBUS, + .spd_spec = {.spd_smbus_address = 0xa0}, + }, + .spd[2] = { + .read_type = READ_SMBUS, + .spd_spec = {.spd_smbus_address = 0xa4}, + }, + .rcomp_resistor = { 121, 75, 100 }, + .rcomp_targets = { 50, 25, 20, 20, 26 }, + .dq_pins_interleaved = 1, + .vref_ca_config = 2, +}; + +void mainboard_memory_init_params(FSPM_UPD *memupd) +{ + // Allow memory speeds higher than 2666 MT/s + memupd->FspmConfig.SaOcSupport = 1; + + cannonlake_memcfg_init(&memupd->FspmConfig, &memcfg); +}