mb/google/nissa/var/quandiso: Update initial files based on yavilla
Update files copied from yavilla - fw_config setting - GPIO setting - Kconfig setting - overridetree setting - SPD memory parts - variant setting BUG=b:296506936 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage flash bin file in DUT Change-Id: Ibbef42a1f891d0cf0309aa76edd7ec5dd664588e Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77361 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Robert Chen
Felix Held
parent
cce6d13aa7
commit
ff153965cd
|
|
@ -171,6 +171,7 @@ config DRIVER_TPM_I2C_BUS
|
|||
default 0x0 if BOARD_GOOGLE_GOTHRAX
|
||||
default 0x0 if BOARD_GOOGLE_PIRRHA
|
||||
default 0x1 if BOARD_GOOGLE_DOCHI
|
||||
default 0x0 if BOARD_GOOGLE_QUANDISO
|
||||
|
||||
config DRIVER_TPM_I2C_ADDR
|
||||
hex
|
||||
|
|
|
|||
|
|
@ -288,6 +288,14 @@ config BOARD_GOOGLE_PUJJO
|
|||
select HAVE_WWAN_POWER_SEQUENCE
|
||||
select INTEL_GMA_HAVE_VBT
|
||||
|
||||
config BOARD_GOOGLE_QUANDISO
|
||||
bool "-> Quandiso"
|
||||
select BOARD_GOOGLE_BASEBOARD_NISSA
|
||||
select CHROMEOS_WIFI_SAR if CHROMEOS
|
||||
select DRIVERS_GENERIC_GPIO_KEYS
|
||||
select DRIVERS_INTEL_MIPI_CAMERA
|
||||
select HAVE_WWAN_POWER_SEQUENCE
|
||||
|
||||
config BOARD_GOOGLE_REDRIX
|
||||
bool "-> Redrix"
|
||||
select BOARD_GOOGLE_BASEBOARD_BRYA
|
||||
|
|
@ -430,10 +438,6 @@ config BOARD_GOOGLE_ZYDRON
|
|||
select SOC_INTEL_COMMON_BLOCK_IPU
|
||||
select SOC_INTEL_RAPTORLAKE
|
||||
|
||||
config BOARD_GOOGLE_QUANDISO
|
||||
bool "-> Quandiso"
|
||||
select BOARD_GOOGLE_BASEBOARD_NISSA
|
||||
|
||||
config BOARD_GOOGLE_NOKRIS
|
||||
bool "-> Nokris"
|
||||
select BOARD_GOOGLE_BASEBOARD_NISSA
|
||||
|
|
|
|||
|
|
@ -0,0 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
bootblock-y += gpio.c
|
||||
|
||||
romstage-y += gpio.c
|
||||
|
||||
ramstage-$(CONFIG_FW_CONFIG) += fw_config.c
|
||||
ramstage-$(CONFIG_FW_CONFIG) += variant.c
|
||||
ramstage-y += gpio.c
|
||||
|
|
@ -0,0 +1,101 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
#include <baseboard/variants.h>
|
||||
#include <console/console.h>
|
||||
#include <fw_config.h>
|
||||
|
||||
|
||||
static const struct pad_config lte_disable_pads[] = {
|
||||
/* A8 : WWAN_RF_DISABLE_ODL */
|
||||
PAD_NC(GPP_A8, NONE),
|
||||
/* D6 : WWAN_EN */
|
||||
PAD_NC(GPP_D6, NONE),
|
||||
/* F12 : WWAN_RST_L */
|
||||
PAD_NC(GPP_F12, NONE),
|
||||
/* H23 : WWAN_SAR_DETECT_ODL */
|
||||
PAD_NC(GPP_H23, NONE),
|
||||
};
|
||||
|
||||
static const struct pad_config wfc_disable_pads[] = {
|
||||
/* D3 : WCAM_RST_L */
|
||||
PAD_NC_LOCK(GPP_D3, NONE, LOCK_CONFIG),
|
||||
/* D15 : EN_PP2800_WCAM_X */
|
||||
PAD_NC_LOCK(GPP_D15, NONE, LOCK_CONFIG),
|
||||
/* D16 : EN_PP1800_PP1200_WCAM_X */
|
||||
PAD_NC_LOCK(GPP_D16, NONE, LOCK_CONFIG),
|
||||
/* H22 : WCAM_MCLK_R */
|
||||
PAD_NC(GPP_H22, NONE),
|
||||
/* R6 : DMIC_WCAM_CLK_R */
|
||||
PAD_NC(GPP_R6, NONE),
|
||||
/* R7 : DMIC_WCAM_DATA */
|
||||
PAD_NC(GPP_R7, NONE),
|
||||
};
|
||||
|
||||
static const struct pad_config emmc_disable_pads[] = {
|
||||
/* I7 : EMMC_CMD */
|
||||
PAD_NC(GPP_I7, NONE),
|
||||
/* I8 : EMMC_D0 */
|
||||
PAD_NC(GPP_I8, NONE),
|
||||
/* I9 : EMMC_D1 */
|
||||
PAD_NC(GPP_I9, NONE),
|
||||
/* I10 : EMMC_D2 */
|
||||
PAD_NC(GPP_I10, NONE),
|
||||
/* I11 : EMMC_D3 */
|
||||
PAD_NC(GPP_I11, NONE),
|
||||
/* I12 : EMMC_D4 */
|
||||
PAD_NC(GPP_I12, NONE),
|
||||
/* I13 : EMMC_D5 */
|
||||
PAD_NC(GPP_I13, NONE),
|
||||
/* I14 : EMMC_D6 */
|
||||
PAD_NC(GPP_I14, NONE),
|
||||
/* I15 : EMMC_D7 */
|
||||
PAD_NC(GPP_I15, NONE),
|
||||
/* I16 : EMMC_RCLK */
|
||||
PAD_NC(GPP_I16, NONE),
|
||||
/* I17 : EMMC_CLK */
|
||||
PAD_NC(GPP_I17, NONE),
|
||||
/* I18 : EMMC_RST_L */
|
||||
PAD_NC(GPP_I18, NONE),
|
||||
};
|
||||
|
||||
static const struct pad_config stylus_disable_pads[] = {
|
||||
/* F13 : SOC_PEN_DETECT_R_ODL */
|
||||
PAD_NC_LOCK(GPP_F13, NONE, LOCK_CONFIG),
|
||||
/* F15 : SOC_PEN_DETECT_ODL */
|
||||
PAD_NC_LOCK(GPP_F15, NONE, LOCK_CONFIG),
|
||||
};
|
||||
|
||||
static const struct pad_config disable_wifi_pch_susclk[] = {
|
||||
/* GPD8 ==> NC */
|
||||
PAD_NC(GPD8, NONE),
|
||||
};
|
||||
|
||||
void fw_config_gpio_padbased_override(struct pad_config *padbased_table)
|
||||
{
|
||||
if (!fw_config_probe(FW_CONFIG(DB_USB, DB_1C_LTE))) {
|
||||
printk(BIOS_INFO, "Disable LTE-related GPIO pins.\n");
|
||||
gpio_padbased_override(padbased_table, lte_disable_pads,
|
||||
ARRAY_SIZE(lte_disable_pads));
|
||||
}
|
||||
if (fw_config_probe(FW_CONFIG(WFC, WFC_ABSENT))) {
|
||||
printk(BIOS_INFO, "Disable MIPI WFC GPIO pins.\n");
|
||||
gpio_padbased_override(padbased_table, wfc_disable_pads,
|
||||
ARRAY_SIZE(wfc_disable_pads));
|
||||
}
|
||||
if (fw_config_is_provisioned() && !fw_config_probe(FW_CONFIG(STORAGE, STORAGE_EMMC))) {
|
||||
printk(BIOS_INFO, "Disable eMMC GPIO pins.\n");
|
||||
gpio_padbased_override(padbased_table, emmc_disable_pads,
|
||||
ARRAY_SIZE(emmc_disable_pads));
|
||||
}
|
||||
if (fw_config_probe(FW_CONFIG(STYLUS, STYLUS_ABSENT))) {
|
||||
printk(BIOS_INFO, "Disable Stylus GPIO pins.\n");
|
||||
gpio_padbased_override(padbased_table, stylus_disable_pads,
|
||||
ARRAY_SIZE(stylus_disable_pads));
|
||||
}
|
||||
if (fw_config_probe(FW_CONFIG(WIFI_SAR_ID, SAR_ID_3))) {
|
||||
printk(BIOS_INFO, "Disable PCH SUSCLK.\n");
|
||||
gpio_padbased_override(padbased_table, disable_wifi_pch_susclk,
|
||||
ARRAY_SIZE(disable_wifi_pch_susclk));
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,101 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
#include <baseboard/variants.h>
|
||||
#include <commonlib/helpers.h>
|
||||
#include <soc/gpio.h>
|
||||
|
||||
/* Pad configuration in ramstage */
|
||||
static const struct pad_config override_gpio_table[] = {
|
||||
/* A8 : WWAN_RF_DISABLE_ODL */
|
||||
PAD_CFG_GPO(GPP_A8, 1, DEEP),
|
||||
/* A18 : NC ==> HDMI_HPD_SRC */
|
||||
PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1),
|
||||
/* A21 : GPP_A21 ==> USB_C1_AUX_DC_P */
|
||||
PAD_CFG_GPO(GPP_A21, 0, DEEP),
|
||||
/* A22 : GPP_A22 ==> USB_C1_AUX_DC_N */
|
||||
PAD_CFG_GPO(GPP_A22, 1, DEEP),
|
||||
|
||||
/* D6 : WWAN_EN */
|
||||
PAD_CFG_GPO(GPP_D6, 1, DEEP),
|
||||
/* D8 : SD_CLKREQ_ODL ==> NC */
|
||||
PAD_NC(GPP_D8, NONE),
|
||||
|
||||
/* F6 : CNV_PA_BLANKING ==> NC */
|
||||
PAD_NC(GPP_F6, NONE),
|
||||
/* F12 : WWAN_RST_ODL */
|
||||
PAD_CFG_GPO_LOCK(GPP_F12, 1, LOCK_CONFIG),
|
||||
/* F23 : V1P05EXT_CTRL ==> NC */
|
||||
PAD_NC(GPP_F23, NONE),
|
||||
|
||||
/* H8 : CNV_MFUART2_RXD ==> NC */
|
||||
PAD_NC(GPP_H8, NONE),
|
||||
/* H9 : CNV_MFUART2_TXD ==> NC */
|
||||
PAD_NC(GPP_H9, NONE),
|
||||
/* H12 : SD_PERST_L ==> NC */
|
||||
PAD_NC(GPP_H12, NONE),
|
||||
/* H13 : EN_PP3300_SD_X ==> NC */
|
||||
PAD_NC(GPP_H13, NONE),
|
||||
/* H15 : HDMI_SRC_SCL */
|
||||
PAD_CFG_NF(GPP_H15, NONE, DEEP, NF1),
|
||||
/* H17 : HDMI_SRC_SDA */
|
||||
PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1),
|
||||
/* H19 : SRCCLKREQ4# ==> NC */
|
||||
PAD_NC(GPP_H19, NONE),
|
||||
/* H23 : WWAN_SAR_DETECT_ODL */
|
||||
PAD_CFG_GPO(GPP_H23, 1, DEEP),
|
||||
};
|
||||
|
||||
/* Early pad configuration in bootblock */
|
||||
static const struct pad_config early_gpio_table[] = {
|
||||
/* D6 : WWAN_EN */
|
||||
PAD_CFG_GPO(GPP_D6, 0, DEEP),
|
||||
/* H20 : IMGCLKOUT1 ==> WLAN_PERST_L */
|
||||
PAD_CFG_GPO(GPP_H20, 0, DEEP),
|
||||
/* A13 : GPP_A13 ==> GSC_SOC_INT_ODL */
|
||||
PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
|
||||
/* E12 : THC0_SPI1_IO1 ==> SOC_WP_OD */
|
||||
PAD_CFG_GPI_GPIO_DRIVER(GPP_E12, NONE, DEEP),
|
||||
/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */
|
||||
PAD_CFG_GPI(GPP_F18, NONE, DEEP),
|
||||
/* H4 : I2C0_SDA ==> SOC_I2C_GSC_SDA */
|
||||
PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
|
||||
/* H5 : I2C0_SCL ==> SOC_I2C_GSC_SCL */
|
||||
PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),
|
||||
/* H10 : UART0_RXD ==> UART_SOC_RX_DBG_TX */
|
||||
PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
|
||||
/* H11 : UART0_TXD ==> UART_SOC_TX_DBG_RX */
|
||||
PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
|
||||
/* B11 : PMCALERT# ==> EN_PP3300_WLAN_X */
|
||||
PAD_CFG_GPO(GPP_B11, 1, DEEP),
|
||||
/* F12 : WWAN_RST_ODL */
|
||||
PAD_CFG_GPO(GPP_F12, 0, DEEP),
|
||||
};
|
||||
|
||||
static const struct pad_config romstage_gpio_table[] = {
|
||||
/* Enable touchscreen, hold in reset */
|
||||
/* C0 : SMBCLK ==> EN_PP3300_TCHSCR */
|
||||
PAD_CFG_GPO(GPP_C0, 1, DEEP),
|
||||
/* C1 : SMBDATA ==> USI_RST_L */
|
||||
PAD_CFG_GPO(GPP_C1, 0, DEEP),
|
||||
/* H20 : IMGCLKOUT1 ==> WLAN_PERST_L */
|
||||
PAD_CFG_GPO(GPP_H20, 1, DEEP),
|
||||
};
|
||||
|
||||
const struct pad_config *variant_gpio_override_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(override_gpio_table);
|
||||
return override_gpio_table;
|
||||
}
|
||||
|
||||
const struct pad_config *variant_early_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(early_gpio_table);
|
||||
return early_gpio_table;
|
||||
}
|
||||
|
||||
const struct pad_config *variant_romstage_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(romstage_gpio_table);
|
||||
return romstage_gpio_table;
|
||||
}
|
||||
|
|
@ -5,4 +5,8 @@
|
|||
|
||||
#include <baseboard/gpio.h>
|
||||
|
||||
#define WWAN_FCPO GPP_D6
|
||||
#define WWAN_RST GPP_F12
|
||||
#define T2_OFF_MS 20
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,5 +1,13 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
# This is an auto-generated file. Do not edit!!
|
||||
# Add memory parts in mem_parts_used.txt and run spd_tools to regenerate.
|
||||
# Generated by:
|
||||
# ./util/spd_tools/bin/part_id_gen ADL lp5 src/mainboard/google/brya/variants/quandiso/memory src/mainboard/google/brya/variants/quandiso/memory/mem_parts_used.txt
|
||||
|
||||
SPD_SOURCES = placeholder
|
||||
SPD_SOURCES =
|
||||
SPD_SOURCES += spd/lp5/set-0/spd-1.hex # ID = 0(0b0000) Parts = MT62F512M32D2DR-031 WT:B, H9JCNNNBK3MLYR-N6E
|
||||
SPD_SOURCES += spd/lp5/set-0/spd-2.hex # ID = 1(0b0001) Parts = MT62F1G32D4DR-031 WT:B
|
||||
SPD_SOURCES += spd/lp5/set-0/spd-3.hex # ID = 2(0b0010) Parts = H58G56AK6BX069, K3LKBKB0BM-MGCP
|
||||
SPD_SOURCES += spd/lp5/set-0/spd-7.hex # ID = 3(0b0011) Parts = H58G56BK7BX068, MT62F1G32D2DS-026 WT:B, K3KL8L80CM-MGCT
|
||||
SPD_SOURCES += spd/lp5/set-0/spd-8.hex # ID = 4(0b0100) Parts = H58G66BK7BX067, MT62F2G32D4DS-026 WT:B, K3KL9L90CM-MGCT
|
||||
SPD_SOURCES += spd/lp5/set-0/spd-6.hex # ID = 5(0b0101) Parts = H58G66AK6BX070
|
||||
SPD_SOURCES += spd/lp5/set-0/spd-9.hex # ID = 6(0b0110) Parts = K3KL6L60GM-MGCT
|
||||
|
|
|
|||
|
|
@ -1 +1,21 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
# This is an auto-generated file. Do not edit!!
|
||||
# Generated by:
|
||||
# ./util/spd_tools/bin/part_id_gen ADL lp5
|
||||
src/mainboard/google/brya/variants/quandiso/memory
|
||||
src/mainboard/google/brya/variants/quandiso/memory/mem_parts_used.txt
|
||||
|
||||
DRAM Part Name ID to assign
|
||||
MT62F512M32D2DR-031 WT:B 0 (0000)
|
||||
MT62F1G32D4DR-031 WT:B 1 (0001)
|
||||
H9JCNNNBK3MLYR-N6E 0 (0000)
|
||||
H58G56AK6BX069 2 (0010)
|
||||
K3LKBKB0BM-MGCP 2 (0010)
|
||||
H58G56BK7BX068 3 (0011)
|
||||
MT62F1G32D2DS-026 WT:B 3 (0011)
|
||||
K3KL8L80CM-MGCT 3 (0011)
|
||||
H58G66BK7BX067 4 (0100)
|
||||
MT62F2G32D4DS-026 WT:B 4 (0100)
|
||||
K3KL9L90CM-MGCT 4 (0100)
|
||||
H58G66AK6BX070 5 (0101)
|
||||
K3KL6L60GM-MGCT 6 (0110)
|
||||
|
|
|
|||
|
|
@ -9,3 +9,16 @@
|
|||
# See util/spd_tools/README.md for more details and instructions.
|
||||
|
||||
# Part Name
|
||||
MT62F512M32D2DR-031 WT:B
|
||||
MT62F1G32D4DR-031 WT:B
|
||||
H9JCNNNBK3MLYR-N6E
|
||||
H58G56AK6BX069
|
||||
K3LKBKB0BM-MGCP
|
||||
H58G56BK7BX068
|
||||
MT62F1G32D2DS-026 WT:B
|
||||
K3KL8L80CM-MGCT
|
||||
H58G66BK7BX067
|
||||
MT62F2G32D4DS-026 WT:B
|
||||
K3KL9L90CM-MGCT
|
||||
H58G66AK6BX070
|
||||
K3KL6L60GM-MGCT
|
||||
|
|
|
|||
|
|
@ -1,6 +1,572 @@
|
|||
chip soc/intel/alderlake
|
||||
|
||||
device domain 0 on
|
||||
end
|
||||
|
||||
fw_config
|
||||
field DB_USB 0 1
|
||||
option DB_NONE 0
|
||||
option DB_1C_1A 1
|
||||
option DB_1C 2
|
||||
option DB_1C_LTE 3
|
||||
end
|
||||
field WIFI_SAR_ID 2 3
|
||||
option SAR_ID_0 0
|
||||
option SAR_ID_1 1
|
||||
option SAR_ID_2 2
|
||||
option SAR_ID_3 3
|
||||
end
|
||||
field STYLUS 9
|
||||
option STYLUS_ABSENT 0
|
||||
option STYLUS_PRESENT 1
|
||||
end
|
||||
field SD_CARD 10
|
||||
option SD_PRESENT 0
|
||||
option SD_ABSENT 1
|
||||
end
|
||||
field WFC 11
|
||||
option WFC_ABSENT 0
|
||||
option WFC_MIPI_OVTI8856 1
|
||||
end
|
||||
field MB_HDMI 12
|
||||
option HDMI_ABSENT 0
|
||||
option HDMI_PRESENT 1
|
||||
end
|
||||
field MB_USB 15
|
||||
option MB_1C 0
|
||||
option MB_1C_2A 1
|
||||
end
|
||||
field WIFI_SAR_ID2 16 19
|
||||
option INTEL_YAVILLA_LTE 0
|
||||
option INTEL_YAVILLA_WIFI 1
|
||||
option INTEL_YAVILLY_LTE 2
|
||||
option INTEL_YAVILLY_WIFI 3
|
||||
option INTEL_YAVIJO_LTE 4
|
||||
option INTEL_YAVIJO_WIFI 5
|
||||
option UNUSED 15
|
||||
end
|
||||
end
|
||||
|
||||
chip soc/intel/alderlake
|
||||
register "sagv" = "SaGv_Enabled"
|
||||
|
||||
# EMMC Tx CMD Delay
|
||||
# Refer to EDS-Vol2-42.3.7.
|
||||
# [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39.
|
||||
# [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39.
|
||||
register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505"
|
||||
|
||||
# EMMC TX DATA Delay 1
|
||||
# Refer to EDS-Vol2-42.3.8.
|
||||
# [14:8] steps of delay for HS400, each 125ps, range: 0 - 78.
|
||||
# [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79.
|
||||
register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x909"
|
||||
|
||||
# EMMC TX DATA Delay 2
|
||||
# Refer to EDS-Vol2-42.3.9.
|
||||
# [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79.
|
||||
# [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
|
||||
# [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79.
|
||||
# [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79.
|
||||
register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C272828"
|
||||
|
||||
# EMMC RX CMD/DATA Delay 1
|
||||
# Refer to EDS-Vol2-42.3.10.
|
||||
# [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119.
|
||||
# [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
|
||||
# [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119.
|
||||
# [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119.
|
||||
register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C171733"
|
||||
|
||||
# EMMC RX CMD/DATA Delay 2
|
||||
# Refer to EDS-Vol2-42.3.12.
|
||||
# [17:16] stands for Rx Clock before Output Buffer,
|
||||
# 00: Rx clock after output buffer,
|
||||
# 01: Rx clock before output buffer,
|
||||
# 10: Automatic selection based on working mode.
|
||||
# 11: Reserved
|
||||
# [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39.
|
||||
# [6:0] steps of delay for HS200, each 125ps, range: 0 - 79.
|
||||
register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x10024"
|
||||
|
||||
# EMMC Rx Strobe Delay
|
||||
# Refer to EDS-Vol2-42.3.11.
|
||||
# [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39.
|
||||
# [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39.
|
||||
register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1414"
|
||||
|
||||
# Bit 0 - C0 has no redriver, so enable SBU muxing in the SoC.
|
||||
# Bit 2 - C1 has a redriver which does SBU muxing.
|
||||
# Bit 1,3 - AUX lines are not swapped on the motherboard for either C0 or C1.
|
||||
register "tcss_aux_ori" = "1"
|
||||
|
||||
register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
|
||||
|
||||
register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # USB2 WWAN
|
||||
register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for PCIe WLAN
|
||||
register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for CNVi WLAN
|
||||
|
||||
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 WWAN
|
||||
|
||||
# Configure external V1P05/Vnn/VnnSx Rails
|
||||
register "ext_fivr_settings" = "{
|
||||
.configure_ext_fivr = 1,
|
||||
}"
|
||||
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
#+-------------------+---------------------------+
|
||||
#| I2C0 | TPM. Early init is |
|
||||
#| | required to set up a BAR |
|
||||
#| | for TPM communication |
|
||||
#| I2C1 | Touchscreen |
|
||||
#| I2C2 | WCAM |
|
||||
#| I2C3 | Audio |
|
||||
#| I2C5 | Trackpad |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
.i2c[0] = {
|
||||
.early_init = 1,
|
||||
.speed = I2C_SPEED_FAST_PLUS,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST_PLUS,
|
||||
.scl_lcnt = 56,
|
||||
.scl_hcnt = 30,
|
||||
.sda_hold = 7,
|
||||
}
|
||||
},
|
||||
.i2c[1] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 158,
|
||||
.scl_hcnt = 79,
|
||||
.sda_hold = 30,
|
||||
}
|
||||
},
|
||||
.i2c[2] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 158,
|
||||
.scl_hcnt = 79,
|
||||
.sda_hold = 7,
|
||||
}
|
||||
},
|
||||
.i2c[3] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 158,
|
||||
.scl_hcnt = 79,
|
||||
.sda_hold = 7,
|
||||
}
|
||||
},
|
||||
.i2c[5] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 158,
|
||||
.scl_hcnt = 79,
|
||||
.sda_hold = 40,
|
||||
}
|
||||
},
|
||||
}"
|
||||
|
||||
device domain 0 on
|
||||
device ref dtt on
|
||||
chip drivers/intel/dptf
|
||||
## sensor information
|
||||
register "options.tsr[0].desc" = ""CPU""
|
||||
register "options.tsr[1].desc" = ""5V Regulator""
|
||||
register "options.tsr[2].desc" = ""Charger""
|
||||
|
||||
# TODO: below values are initial reference values only
|
||||
## Passive Policy
|
||||
register "policies.passive" = "{
|
||||
[0] = DPTF_PASSIVE(CPU, CPU, 95, 5000),
|
||||
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000),
|
||||
[2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 75, 5000),
|
||||
[3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 75, 5000),
|
||||
}"
|
||||
|
||||
## Critical Policy
|
||||
register "policies.critical" = "{
|
||||
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
|
||||
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
|
||||
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
|
||||
[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN),
|
||||
}"
|
||||
|
||||
register "controls.power_limits" = "{
|
||||
.pl1 = {
|
||||
.min_power = 3000,
|
||||
.max_power = 6000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 200
|
||||
},
|
||||
.pl2 = {
|
||||
.min_power = 25000,
|
||||
.max_power = 25000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 1000
|
||||
}
|
||||
}"
|
||||
|
||||
## Charger Performance Control (Control, mA)
|
||||
register "controls.charger_perf" = "{
|
||||
[0] = { 255, 1700 },
|
||||
[1] = { 24, 1500 },
|
||||
[2] = { 16, 1000 },
|
||||
[3] = { 8, 500 }
|
||||
}"
|
||||
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref ipu on
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_uid" = "0x50000"
|
||||
register "acpi_name" = ""IPU0""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
|
||||
|
||||
register "cio2_num_ports" = "1"
|
||||
register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used
|
||||
register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
|
||||
register "cio2_prt[0]" = "1"
|
||||
device generic 0 on end
|
||||
end
|
||||
probe WFC WFC_MIPI_OVTI8856
|
||||
end
|
||||
device ref cnvi_wifi on
|
||||
chip drivers/wifi/generic
|
||||
register "enable_cnvi_ddr_rfim" = "true"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref i2c1 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0001""
|
||||
register "desc" = ""ELAN Touchscreen""
|
||||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||
register "detect" = "1"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||
register "reset_delay_ms" = "20"
|
||||
register "reset_off_delay_ms" = "2"
|
||||
register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
|
||||
register "stop_delay_ms" = "280"
|
||||
register "stop_off_delay_ms" = "2"
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||
register "enable_delay_ms" = "1"
|
||||
register "has_power_resource" = "1"
|
||||
device i2c 10 on end
|
||||
end
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""ELAN2513""
|
||||
register "generic.desc" = ""ELAN Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||
register "generic.detect" = "1"
|
||||
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||
register "generic.reset_delay_ms" = "20"
|
||||
register "generic.reset_off_delay_ms" = "2"
|
||||
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
|
||||
register "generic.stop_delay_ms" = "280"
|
||||
register "generic.stop_off_delay_ms" = "2"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||
register "generic.enable_delay_ms" = "1"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 15 on end
|
||||
end
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""GTCH7503""
|
||||
register "generic.desc" = ""G2TOUCH Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||
register "generic.detect" = "1"
|
||||
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||
register "generic.reset_delay_ms" = "50"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||
register "generic.enable_delay_ms" = "1"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 40 on end
|
||||
end
|
||||
chip drivers/generic/gpio_keys
|
||||
register "name" = ""PENH""
|
||||
register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_F13)"
|
||||
register "key.wake_gpe" = "GPE0_DW2_15"
|
||||
register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
|
||||
register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
|
||||
register "key.dev_name" = ""EJCT""
|
||||
register "key.linux_code" = "SW_PEN_INSERTED"
|
||||
register "key.linux_input_type" = "EV_SW"
|
||||
register "key.label" = ""pen_eject""
|
||||
device generic 0 on
|
||||
probe STYLUS STYLUS_PRESENT
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref i2c2 on
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_hid" = ""OVTI8856""
|
||||
register "acpi_uid" = "0"
|
||||
register "acpi_name" = ""CAM0""
|
||||
register "chip_name" = ""Ov 8856 Camera""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
|
||||
register "has_power_resource" = "1"
|
||||
register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
|
||||
|
||||
register "ssdb.lanes_used" = "4"
|
||||
register "ssdb.link_used" = "1"
|
||||
register "ssdb.vcm_type" = "0x0C"
|
||||
register "vcm_name" = ""VCM0""
|
||||
register "num_freq_entries" = "2"
|
||||
register "link_freq[0]" = "360000000"
|
||||
register "link_freq[1]" = "180000000"
|
||||
register "remote_name" = ""IPU0""
|
||||
|
||||
#Controls
|
||||
register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
|
||||
register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
|
||||
|
||||
register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X
|
||||
register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1800_PP1200_WCAM_X
|
||||
register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L
|
||||
|
||||
#_ON
|
||||
register "on_seq.ops_cnt" = "5"
|
||||
register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
|
||||
register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
|
||||
register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
|
||||
register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
|
||||
register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
|
||||
|
||||
#_OFF
|
||||
register "off_seq.ops_cnt" = "4"
|
||||
register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
|
||||
register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
|
||||
register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
|
||||
register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
|
||||
|
||||
device i2c 36 on
|
||||
probe WFC WFC_MIPI_OVTI8856
|
||||
end
|
||||
end
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_uid" = "3"
|
||||
register "acpi_name" = ""VCM0""
|
||||
register "chip_name" = ""DW AF DAC""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_VCM"
|
||||
|
||||
register "vcm_compat" = ""dongwoon,dw9714""
|
||||
|
||||
device i2c 0C on
|
||||
probe WFC WFC_MIPI_OVTI8856
|
||||
end
|
||||
end
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
|
||||
register "acpi_uid" = "1"
|
||||
register "acpi_name" = ""NVM0""
|
||||
register "chip_name" = ""GT24C08""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_NVM"
|
||||
|
||||
register "nvm_size" = "0x400"
|
||||
register "nvm_pagesize" = "1"
|
||||
register "nvm_readonly" = "1"
|
||||
register "nvm_width" = "0x08"
|
||||
register "nvm_compat" = ""atmel,24c08""
|
||||
|
||||
device i2c 50 on
|
||||
probe WFC WFC_MIPI_OVTI8856
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref i2c3 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""RTL5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Headset Codec""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
|
||||
# Set the jd_src to RT5668_JD1 for jack detection
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on end
|
||||
end
|
||||
end
|
||||
device ref i2c5 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "wake" = "GPE0_DW2_14"
|
||||
register "detect" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""SYNA0000""
|
||||
register "generic.cid" = ""ACPI0C50""
|
||||
register "generic.desc" = ""Synaptics Touchpad""
|
||||
register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "generic.wake" = "GPE0_DW2_14"
|
||||
register "generic.detect" = "1"
|
||||
register "hid_desc_reg_offset" = "0x20"
|
||||
device i2c 0x2c on end
|
||||
end
|
||||
end
|
||||
device ref hda on
|
||||
chip drivers/generic/max98357a
|
||||
register "hid" = ""MX98360A""
|
||||
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
|
||||
register "sdmode_delay" = "5"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref pcie_rp4 on
|
||||
# PCIe 4 WLAN
|
||||
register "pch_pcie_rp[PCH_RP(4)]" = "{
|
||||
.clk_src = 2,
|
||||
.clk_req = 2,
|
||||
.flags = PCIE_RP_LTR | PCIE_RP_AER,
|
||||
}"
|
||||
chip drivers/wifi/generic
|
||||
register "wake" = "GPE0_DW1_03"
|
||||
register "add_acpi_dma_property" = "true"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end
|
||||
device ref pcie_rp7 off end #PCIE7 no SD card
|
||||
device ref emmc on end
|
||||
device ref ish on
|
||||
chip drivers/intel/ish
|
||||
register "add_acpi_dma_property" = "true"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref ufs on end
|
||||
device ref pch_espi on
|
||||
chip ec/google/chromeec
|
||||
use conn0 as mux_conn[0]
|
||||
use conn1 as mux_conn[1]
|
||||
device pnp 0c09.0 on end
|
||||
end
|
||||
end
|
||||
device ref pmc hidden
|
||||
chip drivers/intel/pmc_mux
|
||||
device generic 0 on
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
use usb2_port1 as usb2_port
|
||||
use tcss_usb3_port1 as usb3_port
|
||||
device generic 0 alias conn0 on end
|
||||
end
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
use usb2_port2 as usb2_port
|
||||
use tcss_usb3_port2 as usb3_port
|
||||
device generic 1 alias conn1 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref tcss_xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref tcss_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
|
||||
device ref tcss_usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C1 (DB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
|
||||
device ref tcss_usb3_port2 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref xhci_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
|
||||
device ref usb2_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C1 (DB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
|
||||
device ref usb2_port2 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A0 (MLB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
|
||||
device ref usb2_port3 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A1 (MLB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))"
|
||||
device ref usb2_port4 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 WWAN""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port5 on
|
||||
probe DB_USB DB_1C_LTE
|
||||
end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 UFC""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port6 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Bluetooth""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
register "reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||
device ref usb2_port8 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""CNVi Bluetooth""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
register "reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||
device ref usb2_port10 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A0 (MLB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
|
||||
device ref usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A1 (DB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))"
|
||||
device ref usb3_port2 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 WWAN""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb3_port3 on
|
||||
probe DB_USB DB_1C_LTE
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
|
|
|||
|
|
@ -0,0 +1,35 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <baseboard/variants.h>
|
||||
#include <boardid.h>
|
||||
#include <device/device.h>
|
||||
#include <fw_config.h>
|
||||
#include <sar.h>
|
||||
|
||||
void variant_devtree_update(void)
|
||||
{
|
||||
struct device *emmc = DEV_PTR(emmc);
|
||||
struct device *ufs = DEV_PTR(ufs);
|
||||
struct device *ish = DEV_PTR(ish);
|
||||
|
||||
if (!fw_config_is_provisioned()) {
|
||||
printk(BIOS_INFO, "fw_config unprovisioned so enable all storage devices\n");
|
||||
return;
|
||||
}
|
||||
|
||||
if (!fw_config_probe(FW_CONFIG(STORAGE, STORAGE_EMMC))) {
|
||||
printk(BIOS_INFO, "eMMC disabled by fw_config\n");
|
||||
emmc->enabled = 0;
|
||||
}
|
||||
|
||||
if (!fw_config_probe(FW_CONFIG(STORAGE, STORAGE_UFS))) {
|
||||
printk(BIOS_INFO, "UFS disabled by fw_config\n");
|
||||
ufs->enabled = 0;
|
||||
ish->enabled = 0;
|
||||
}
|
||||
}
|
||||
|
||||
const char *get_wifi_sar_cbfs_filename(void)
|
||||
{
|
||||
return get_wifi_sar_fw_config_filename(FW_CONFIG_FIELD(WIFI_SAR_ID2));
|
||||
}
|
||||
Loading…
Reference in New Issue