mb/google/zork/var/vilboz: Use AMDI1015 HID for I2S machine device
Vilboz requires a different HID than rest of the zork variants. Hence, this change sets the HID to AMDI1015 for I2S machine device in vilboz overridetree.cb. BUG=b:157708581 Change-Id: Ibae343f21cf8f0c782dc8a461f69172bf0da7eba Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43545 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
0fba23bc64
commit
ff75c21e6d
|
@ -36,6 +36,24 @@ chip soc/amd/picasso
|
|||
# See AMD 55570-B1 Table 13: PCI Device ID Assignments.
|
||||
device domain 0 on
|
||||
subsystemid 0x1022 0x1510 inherit
|
||||
device pci 8.1 on
|
||||
device pci 0.5 on
|
||||
chip drivers/amd/i2s_machine_dev
|
||||
register "hid" = ""AMDI1015""
|
||||
# DMIC select GPIO for ACP machine device
|
||||
# This GPIO is used to select DMIC0 or DMIC1 by the
|
||||
# kernel driver. It does not really have a polarity
|
||||
# since low and high control the selection of DMIC and
|
||||
# hence does not have an active polarity.
|
||||
# Kernel driver does not use the polarity field and
|
||||
# instead treats the GPIO selection as follows:
|
||||
# Set low (0) = Select DMIC0
|
||||
# Set high (1) = Select DMIC1
|
||||
register "dmic_select_gpio" = "ACPI_GPIO_OUTPUT(GPIO_67)"
|
||||
device generic 0.0 on end
|
||||
end
|
||||
end # Audio
|
||||
end
|
||||
device pci 14.3 on # - D14F3 bridge
|
||||
chip ec/google/chromeec
|
||||
device pnp 0c09.0 on
|
||||
|
|
Loading…
Reference in New Issue