diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc index ccd38abf0d..bf429ef902 100644 --- a/src/soc/intel/skylake/Makefile.inc +++ b/src/soc/intel/skylake/Makefile.inc @@ -36,6 +36,7 @@ romstage-y += flash_controller.c romstage-y += gpio.c romstage-y += memmap.c romstage-y += monotonic_timer.c +romstage-y += me.c romstage-y += pch.c romstage-y += pcr.c romstage-y += pei_data.c @@ -59,7 +60,7 @@ ramstage-y += i2c.c ramstage-y += igd.c ramstage-y += irq.c ramstage-y += lpc.c -ramstage-y += me_status.c +ramstage-y += me.c ramstage-y += memmap.c ramstage-y += monotonic_timer.c ramstage-$(CONFIG_PLATFORM_USES_FSP1_1) += opregion.c diff --git a/src/soc/intel/skylake/include/soc/me.h b/src/soc/intel/skylake/include/soc/me.h index 423e9d10cc..8dc21c381f 100644 --- a/src/soc/intel/skylake/include/soc/me.h +++ b/src/soc/intel/skylake/include/soc/me.h @@ -48,7 +48,9 @@ #define ME_HFS_POWER_SOURCE_AC 1 #define ME_HFS_POWER_SOURCE_DC 2 -struct me_hfs { +union me_hfs { + u32 data; + struct { u32 working_state: 4; u32 mfg_mode: 1; u32 fpt_bad: 1; @@ -66,7 +68,8 @@ struct me_hfs { u32 current_power_source: 2; u32 d3_support_valid: 1; u32 d0i3_support_valid: 1; -} __attribute__ ((packed)); + } __attribute__ ((packed)) fields; +}; #define PCI_ME_HFSTS2 0x48 /* Infrastructure Progress Values */ @@ -145,7 +148,9 @@ struct me_hfs { #define ME_HFS2_PMEVENT_CM3_CM3PG 0xe #define ME_HFS2_PMEVENT_CM0PG_CM0 0xf -struct me_hfs2 { +union me_hfs2 { + u32 data; + struct { u32 reserved1: 3; u32 invoke_mebx: 1; u32 cpu_replaced_sts: 1; @@ -161,13 +166,16 @@ struct me_hfs2 { u32 current_state: 8; u32 current_pmevent: 4; u32 progress_code: 4; -} __attribute__ ((packed)); + } __attribute__ ((packed)) fields; +}; #define PCI_ME_HFSTS3 0x60 #define ME_HFS3_FW_SKU_CONSUMER 0x2 #define ME_HFS3_FW_SKU_CORPORATE 0x3 -struct me_hfs3 { +union me_hfs3 { + u32 data; + struct { u32 reserved1: 4; u32 fw_sku: 3; u32 encrypt_key_check: 1; @@ -175,8 +183,80 @@ struct me_hfs3 { u32 reserved2: 21; u32 encrypt_key_override: 1; u32 power_down_mitigation: 1; -} __attribute__ ((packed)); + } __attribute__ ((packed)) fields; +}; + +/* + * Management Engine MMIO registers + */ +#define MMIO_ME_CB_WW 0x00 +#define MMIO_HOST_CSR 0x04 + +union host_csr { + u32 data; + struct { + u32 int_en: 1; + u32 int_sts: 1; + u32 int_gen: 1; + u32 host_ready: 1; + u32 host_reset: 1; + u32 rsv: 3; + u32 host_read_offset: 8; + u32 host_write_offset: 8; + u32 me_cir_depth: 8; + } __attribute__ ((packed)) fields; +}; + +#define MMIO_ME_CB_RW 0x08 +#define MMIO_ME_CSR 0x0C + +union me_csr { + u32 data; + struct { + u32 int_en: 1; + u32 int_sts: 1; + u32 int_gen: 1; + u32 host_ready: 1; + u32 host_reset: 1; + u32 rsv: 3; + u32 me_read_offset: 8; + u32 me_write_offset: 8; + u32 me_cir_buff: 8; + } __attribute__ ((packed)) fields; +}; + +#define MMIO_ME_D0I3 0x800 + +/* Reset Request */ +#define MKHI_GLOBAL_RESET 0x0b + +#define GR_ORIGIN_BIOS_MEM_INIT 0x01 +#define GR_ORIGIN_BIOS_POST 0x02 +#define GR_ORIGIN_MEBX 0x03 + +#define GLOBAL_RST_TYPE 0x01 + +#define BIOS_HOST_ADD 0x00 +#define HECI_MKHI_ADD 0x07 + +#define MAX_HECI_MESSAGE 5 +#define HECI_TIMEOUT 15000000 /* 15sec */ +#define HECI_SEND_TIMEOUT 5000000 /* 5sec */ +#define HECI_READ_TIMEOUT 5000000 /* 5sec */ +#define HECI_DELAY 1000 /* 1ms */ + +union mei_header { + u32 data; + struct { + u32 client_address: 8; + u32 host_address: 8; + u32 length: 9; + u32 reserved: 6; + u32 is_complete: 1; + } __attribute__ ((packed)) fields; +}; void intel_me_status(void); +int send_global_reset(void); #endif diff --git a/src/soc/intel/skylake/me.c b/src/soc/intel/skylake/me.c new file mode 100644 index 0000000000..2f94123374 --- /dev/null +++ b/src/soc/intel/skylake/me.c @@ -0,0 +1,683 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static inline u32 me_read_config32(int offset) +{ + return pci_read_config32(PCH_DEV_ME, offset); +} + +static inline void me_write_config32(int offset, u32 value) +{ + pci_write_config32(PCH_DEV_ME, offset, value); +} + +static inline u32 me_read_mmio32(int offset) +{ + return read32((void *)(HECI1_BASE_ADDRESS + offset)); +} + +static inline void me_write_mmio32(u16 offset, u32 value) +{ + write32((void *)(HECI1_BASE_ADDRESS + offset), value); +} + +/* HFSTS1[3:0] Current Working State Values */ +static const char *me_cws_values[] = { + [ME_HFS_CWS_RESET] = "Reset", + [ME_HFS_CWS_INIT] = "Initializing", + [ME_HFS_CWS_REC] = "Recovery", + [3] = "Unknown (3)", + [4] = "Unknown (4)", + [ME_HFS_CWS_NORMAL] = "Normal", + [ME_HFS_CWS_WAIT] = "Platform Disable Wait", + [ME_HFS_CWS_TRANS] = "OP State Transition", + [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In", + [9] = "Unknown (9)", + [10] = "Unknown (10)", + [11] = "Unknown (11)", + [12] = "Unknown (12)", + [13] = "Unknown (13)", + [14] = "Unknown (14)", + [15] = "Unknown (15)", +}; + +/* HFSTS1[8:6] Current Operation State Values */ +static const char *me_opstate_values[] = { + [ME_HFS_STATE_PREBOOT] = "Preboot", + [ME_HFS_STATE_M0_UMA] = "M0 with UMA", + [ME_HFS_STATE_M3] = "M3 without UMA", + [ME_HFS_STATE_M0] = "M0 without UMA", + [ME_HFS_STATE_BRINGUP] = "Bring up", + [ME_HFS_STATE_ERROR] = "M0 without UMA but with error" +}; + +/* HFSTS1[19:16] Current Operation Mode Values */ +static const char *me_opmode_values[] = { + [ME_HFS_MODE_NORMAL] = "Normal", + [ME_HFS_MODE_DEBUG] = "Debug", + [ME_HFS_MODE_DIS] = "Soft Temporary Disable", + [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper", + [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message" +}; + +/* HFSTS1[15:12] Error Code Values */ +static const char *me_error_values[] = { + [ME_HFS_ERROR_NONE] = "No Error", + [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure", + [ME_HFS_ERROR_IMAGE] = "Image Failure", + [ME_HFS_ERROR_DEBUG] = "Debug Failure" +}; + +/* HFSTS2[31:28] ME Progress Code */ +static const char *me_progress_values[] = { + [ME_HFS2_PHASE_ROM] = "ROM Phase", + [1] = "Unknown (1)", + [ME_HFS2_PHASE_UKERNEL] = "uKernel Phase", + [ME_HFS2_PHASE_BUP] = "BUP Phase", + [4] = "Unknown (4)", + [5] = "Unknown (5)", + [ME_HFS2_PHASE_HOST_COMM] = "Host Communication", + [7] = "Unknown (7)", + [8] = "Unknown (8)" +}; + +/* HFSTS2[27:24] Power Management Event */ +static const char *me_pmevent_values[] = { + [ME_HFS2_PMEVENT_CLEAN_MOFF_MX_WAKE] = + "Clean Moff->Mx wake", + [ME_HFS2_PMEVENT_MOFF_MX_WAKE_ERROR] = + "Moff->Mx wake after an error", + [ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET] = + "Clean global reset", + [ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET_ERROR] = + "Global reset after an error", + [ME_HFS2_PMEVENT_CLEAN_ME_RESET] = + "Clean Intel ME reset", + [ME_HFS2_PMEVENT_ME_RESET_EXCEPTION] = + "Intel ME reset due to exception", + [ME_HFS2_PMEVENT_PSEUDO_ME_RESET] = + "Pseudo-global reset", + [ME_HFS2_PMEVENT_CM0_CM3] = + "CM0->CM3", + [ME_HFS2_PMEVENT_CM3_CM0] = + "CM3->CM0", + [ME_HFS2_PMEVENT_NON_PWR_CYCLE_RESET] = + "Non-power cycle reset", + [ME_HFS2_PMEVENT_PWR_CYCLE_RESET_M3] = + "Power cycle reset through M3", + [ME_HFS2_PMEVENT_PWR_CYCLE_RESET_MOFF] = + "Power cycle reset through Moff", + [ME_HFS2_PMEVENT_CMX_CMOFF] = + "Cx/Mx->Cx/Moff", + [ME_HFS2_PMEVENT_CM0_CM0PG] = + "CM0->CM0PG", + [ME_HFS2_PMEVENT_CM3_CM3PG] = + "CM3->CM3PG", + [ME_HFS2_PMEVENT_CM0PG_CM0] = + "CM0PG->CM0" + +}; + +/* Progress Code 0 states */ +static const char *me_progress_rom_values[] = { + [ME_HFS2_STATE_ROM_BEGIN] = "BEGIN", + [ME_HFS2_STATE_ROM_DISABLE] = "DISABLE" +}; + +/* Progress Code 1 states */ +static const char *me_progress_bup_values[] = { + [ME_HFS2_STATE_BUP_INIT] = + "Initialization starts", + [ME_HFS2_STATE_BUP_DIS_HOST_WAKE] = + "Disable the host wake event", + [ME_HFS2_STATE_BUP_CG_ENABLE] = + "Enabling CG for cset", + [ME_HFS2_STATE_BUP_PM_HND_EN] = + "Enabling PM handshaking", + [ME_HFS2_STATE_BUP_FLOW_DET] = + "Flow determination start process", + [ME_HFS2_STATE_BUP_PMC_PATCHING] = + "PMC Patching process", + [ME_HFS2_STATE_BUP_GET_FLASH_VSCC] = + "Get VSCC params", + [ME_HFS2_STATE_BUP_SET_FLASH_VSCC] = + "Set VSCC params", + [ME_HFS2_STATE_BUP_VSCC_ERR] = + "Error reading/matching the VSCC table in the descriptor", + [ME_HFS2_STATE_BUP_EFSS_INIT] = + "Initialize EFFS", + [ME_HFS2_STATE_BUP_CHECK_STRAP] = + "Check to see if straps say ME DISABLED", + [ME_HFS2_STATE_BUP_PWR_OK_TIMEOUT] = + "Timeout waiting for PWROK", + [ME_HFS2_STATE_BUP_STRAP_DIS] = + "EFFS says ME disabled", + [ME_HFS2_STATE_BUP_MANUF_OVRD_STRAP] = + "Possibly handle BUP manufacturing override strap", + [ME_HFS2_STATE_BUP_M3] = + "Bringup in M3", + [ME_HFS2_STATE_BUP_M0] = + "Bringup in M0", + [ME_HFS2_STATE_BUP_FLOW_DET_ERR] = + "Flow detection error", + [ME_HFS2_STATE_BUP_M3_CLK_ERR] = + "M3 clock switching error", + [ME_HFS2_STATE_BUP_CPU_RESET_DID_TIMEOUT_MEM_MISSING] = + "Host error - CPU reset timeout, DID timeout, memory missing", + [ME_HFS2_STATE_BUP_M3_KERN_LOAD] = + "M3 kernel load", + [ME_HFS2_STATE_BUP_T32_MISSING] = + "T34 missing - cannot program ICC", + [ME_HFS2_STATE_BUP_WAIT_DID] = + "Waiting for DID BIOS message", + [ME_HFS2_STATE_BUP_WAIT_DID_FAIL] = + "Waiting for DID BIOS message failure", + [ME_HFS2_STATE_BUP_DID_NO_FAIL] = + "DID reported no error", + [ME_HFS2_STATE_BUP_ENABLE_UMA] = + "Enabling UMA", + [ME_HFS2_STATE_BUP_ENABLE_UMA_ERR] = + "Enabling UMA error", + [ME_HFS2_STATE_BUP_SEND_DID_ACK] = + "Sending DID Ack to BIOS", + [ME_HFS2_STATE_BUP_SEND_DID_ACK_ERR] = + "Sending DID Ack to BIOS error", + [ME_HFS2_STATE_BUP_M0_CLK] = + "Switching clocks in M0", + [ME_HFS2_STATE_BUP_M0_CLK_ERR] = + "Switching clocks in M0 error", + [ME_HFS2_STATE_BUP_TEMP_DIS] = + "ME in temp disable", + [ME_HFS2_STATE_BUP_M0_KERN_LOAD] = + "M0 kernel load", +}; + +void intel_me_status(void) +{ + union me_hfs hfs; + union me_hfs2 hfs2; + union me_hfs3 hfs3; + + hfs.data = me_read_config32(PCI_ME_HFSTS1); + hfs2.data = me_read_config32(PCI_ME_HFSTS2); + hfs3.data = me_read_config32(PCI_ME_HFSTS3); + + /* Check Current States */ + printk(BIOS_DEBUG, "ME: FW Partition Table : %s\n", + hfs.fields.fpt_bad ? "BAD" : "OK"); + printk(BIOS_DEBUG, "ME: Bringup Loader Failure : %s\n", + hfs.fields.ft_bup_ld_flr ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Firmware Init Complete : %s\n", + hfs.fields.fw_init_complete ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Manufacturing Mode : %s\n", + hfs.fields.mfg_mode ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Boot Options Present : %s\n", + hfs.fields.boot_options_present ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Update In Progress : %s\n", + hfs.fields.update_in_progress ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: D3 Support : %s\n", + hfs.fields.d3_support_valid ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: D0i3 Support : %s\n", + hfs.fields.d0i3_support_valid ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Low Power State Enabled : %s\n", + hfs2.fields.low_power_state ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Power Gated : %s\n", + hfs2.fields.power_gating_ind ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: CPU Replaced : %s\n", + hfs2.fields.cpu_replaced_sts ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: CPU Replacement Valid : %s\n", + hfs2.fields.cpu_replaced_valid ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Current Working State : %s\n", + me_cws_values[hfs.fields.working_state]); + printk(BIOS_DEBUG, "ME: Current Operation State : %s\n", + me_opstate_values[hfs.fields.operation_state]); + printk(BIOS_DEBUG, "ME: Current Operation Mode : %s\n", + me_opmode_values[hfs.fields.operation_mode]); + printk(BIOS_DEBUG, "ME: Error Code : %s\n", + me_error_values[hfs.fields.error_code]); + printk(BIOS_DEBUG, "ME: Progress Phase : %s\n", + me_progress_values[hfs2.fields.progress_code]); + printk(BIOS_DEBUG, "ME: Power Management Event : %s\n", + me_pmevent_values[hfs2.fields.current_pmevent]); + + printk(BIOS_DEBUG, "ME: Progress Phase State : "); + switch (hfs2.fields.progress_code) { + case ME_HFS2_PHASE_ROM: /* ROM Phase */ + printk(BIOS_DEBUG, "%s", + me_progress_rom_values[hfs2.fields.current_state]); + break; + + case ME_HFS2_PHASE_UKERNEL: /* uKernel Phase */ + printk(BIOS_DEBUG, "0x%02x", hfs2.fields.current_state); + break; + + case ME_HFS2_PHASE_BUP: /* Bringup Phase */ + if (hfs2.fields.current_state < ARRAY_SIZE(me_progress_bup_values) + && me_progress_bup_values[hfs2.fields.current_state]) + printk(BIOS_DEBUG, "%s", + me_progress_bup_values[hfs2.fields.current_state]); + else + printk(BIOS_DEBUG, "0x%02x", hfs2.fields.current_state); + break; + + case ME_HFS2_PHASE_HOST_COMM: /* Host Communication Phase */ + if (!hfs2.fields.current_state) + printk(BIOS_DEBUG, "Host communication established"); + else + printk(BIOS_DEBUG, "0x%02x", hfs2.fields.current_state); + break; + + default: + printk(BIOS_DEBUG, "Unknown phase: 0x%02x state: 0x%02x", + hfs2.fields.progress_code, hfs2.fields.current_state); + } + printk(BIOS_DEBUG, "\n"); + + /* Power Down Mitigation Status */ + printk(BIOS_DEBUG, "ME: Power Down Mitigation : %s\n", + hfs3.fields.power_down_mitigation ? "YES" : "NO"); + + if (hfs3.fields.power_down_mitigation) { + printk(BIOS_INFO, "ME: PD Mitigation State : "); + if (hfs3.fields.encrypt_key_override == 1 && + hfs3.fields.encrypt_key_check == 0 && + hfs3.fields.pch_config_change == 0) + printk(BIOS_INFO, "Normal Operation"); + else if (hfs3.fields.encrypt_key_override == 1 && + hfs3.fields.encrypt_key_check == 1 && + hfs3.fields.pch_config_change == 0) + printk(BIOS_INFO, "Issue Detected and Recovered"); + else + printk(BIOS_INFO, "Issue Detected but not Recovered"); + printk(BIOS_INFO, "\n"); + + printk(BIOS_DEBUG, "ME: Encryption Key Override : %s\n", + hfs3.fields.encrypt_key_override ? "Workaround Applied" : + "Unable to override"); + printk(BIOS_DEBUG, "ME: Encryption Key Check : %s\n", + hfs3.fields.encrypt_key_check ? "FAIL" : "PASS"); + printk(BIOS_DEBUG, "ME: PCH Configuration Info : %s\n", + hfs3.fields.pch_config_change ? "Changed" : "No Change"); + + printk(BIOS_DEBUG, "ME: Firmware SKU : "); + switch (hfs3.fields.fw_sku) { + case ME_HFS3_FW_SKU_CONSUMER: + printk(BIOS_DEBUG, "Consumer\n"); + break; + case ME_HFS3_FW_SKU_CORPORATE: + printk(BIOS_DEBUG, "Corporate\n"); + break; + default: + printk(BIOS_DEBUG, "Unknown (0x%x)\n", hfs3.fields.fw_sku); + } + } +} + +/* +* Aligning a byte length to length in dwords. +*/ +static u32 get_dword_length(u32 byte_length) +{ + return ALIGN_UP(byte_length, sizeof(uint32_t)) / sizeof(uint32_t); +} + +/* +* Get remaining message count in dword from circular buffer based on +* write and read offset. +*/ +static u32 get_cb_msg_count(u32 data) +{ + u8 read_offset = data >> 8; + u8 write_offset = data >> 16; + + return get_dword_length(write_offset - read_offset); +} + +static int wait_heci_ready(void) +{ + struct stopwatch sw; + int timeout = 0; + union me_csr csr; + + stopwatch_init_msecs_expire(&sw, HECI_TIMEOUT); + while (1) { + do { + csr.data = me_read_mmio32(MMIO_ME_CSR); + if (csr.fields.host_ready) + return 0; + } while (!(timeout = stopwatch_expired(&sw))); + + printk(BIOS_ERR, "ME_RDY bit is not set after 15 sec"); + return -1; + } +} + +static int wait_heci_cb_avail(u32 len) +{ + struct stopwatch sw; + union host_csr csr; + + csr.data = me_read_mmio32(MMIO_HOST_CSR); + /* + * if timeout has happened, return failure as + * the circular buffer is not empty + */ + stopwatch_init_msecs_expire(&sw, HECI_SEND_TIMEOUT); + /* Must have room for message and message header */ + while (len > (get_dword_length(csr.fields.me_cir_depth) - + get_cb_msg_count(csr.data))) { + if (stopwatch_expired(&sw)) { + printk(BIOS_ERR, + "Circular Buffer never emptied within 5 sec"); + return -1; + } + /* wait before trying again */ + udelay(HECI_DELAY); + /* read HOST_CSR for next iteration */ + csr.data = me_read_mmio32(MMIO_HOST_CSR); + } + return 0; +} + +static int send_heci_packet(union mei_header *head, u32 len, u32 *payload) +{ + int sts; + int index; + union me_csr csr; + union host_csr hcsr; + + /* + * wait until there is sufficient room in CB + */ + sts = wait_heci_cb_avail(len + 1); + if (sts != 0) + return -1; + + /* Write message header */ + me_write_mmio32(MMIO_ME_CB_WW, head->data); + + /* Write message body */ + for (index = 0; index < len; index++) + me_write_mmio32(MMIO_ME_CB_WW, payload[index]); + + /* Set Interrupt Generate bit */ + hcsr.data = me_read_mmio32(MMIO_HOST_CSR); + hcsr.fields.int_gen = 1; + me_write_mmio32(MMIO_HOST_CSR, hcsr.data); + + /* Check if ME Ready bit is set, if set to 0 then return fatal error */ + csr.data = me_read_mmio32(MMIO_ME_CSR); + if (csr.fields.host_ready) + return 0; + else + return -1; +} + +static int recv_heci_packet(union mei_header *head, u32 *packet, + u32 *packet_size) +{ + union me_csr csr; + union host_csr hcsr; + int rec_msg = 0; + struct stopwatch sw; + u32 length, index; + + /* Clear Interrupt Status bit */ + hcsr.data = me_read_mmio32(MMIO_HOST_CSR); + hcsr.fields.int_sts = 1; + me_write_mmio32(MMIO_HOST_CSR, hcsr.data); + + /* Check if circular buffer overflow + * if yes then return fatal error + */ + csr.data = me_read_mmio32(MMIO_ME_CSR); + if (get_cb_msg_count(csr.data) > + get_dword_length(csr.fields.me_cir_buff)) + return -1; + /* + * if timeout has happened, return failure as + * the circular buffer is not empty + */ + stopwatch_init_msecs_expire(&sw, HECI_READ_TIMEOUT); + /* go until we got message pkt */ + do { + if (stopwatch_expired(&sw)) { + printk(BIOS_ERR, + "Circular Buffer not filled within 5 sec"); + *packet_size = 0; + return -1; + } + csr.data = me_read_mmio32(MMIO_ME_CSR); + /* Read one message from HECI buffer */ + if (get_cb_msg_count(csr.data) > 0) { + head->data = me_read_mmio32(MMIO_ME_CB_RW); + /* calculate the message length in dword */ + length = get_dword_length(head->fields.length); + if (head->fields.length == 0) { + *packet_size = 0; + goto SET_IG; + } + /* Make sure, we have enough space to catch all */ + if (head->fields.length <= *packet_size) { + csr.data = me_read_mmio32(MMIO_ME_CSR); + /* get complete message into circular buffer */ + while (length > get_cb_msg_count(csr.data)) { + udelay(HECI_DELAY); + csr.data = me_read_mmio32(MMIO_ME_CSR); + } + /* here is the message */ + for (index = 0; index < length; index++) + packet[index] = me_read_mmio32(MMIO_ME_CB_RW); + + rec_msg = 1; + *packet_size = head->fields.length; + } else { + /* Too small buffer */ + *packet_size = 0; + return -1; + } + } + } while (!rec_msg); + + /* + * Check if ME Ready bit is set, if set to 0 then return fatal error + * because ME might have reset during transaction and we might have + * read a junk data from CB + */ + csr.data = me_read_mmio32(MMIO_ME_CSR); + if (!(csr.fields.host_ready)) + return -1; +SET_IG: + /* Set Interrupt Generate bit */ + hcsr.data = me_read_mmio32(MMIO_HOST_CSR); + hcsr.fields.int_gen = 1; + me_write_mmio32(MMIO_HOST_CSR, hcsr.data); + return 0; +} + +static int +send_heci_message(void *msg, int len, u8 hostaddress, u8 clientaddress) +{ + u8 retry; + int status = -1; + u32 cir_buff_depth; + union host_csr csr; + union mei_header head; + int cur = 0; + u32 slength, rlength; + + for (retry = 0; retry < MAX_HECI_MESSAGE; retry++) { + if (wait_heci_ready() != 0) + continue; + /* HECI is ready */ + csr.data = me_read_mmio32(MMIO_HOST_CSR); + cir_buff_depth = csr.fields.me_cir_depth; + head.fields.client_address = clientaddress; + head.fields.host_address = hostaddress; + while (len > cur) { + rlength = get_dword_length(len - cur); + /* + * Set the message complete bit if this is last packet + * in message needs to be "less than" to account for + * the header OR needs to be exact equal to CB depth + */ + if (rlength <= cir_buff_depth) + head.fields.is_complete = 1; + else + head.fields.is_complete = 0; + /* + * calculate length for message header + * header length = smaller of CB buffer or + * remaining message + */ + slength = ((cir_buff_depth <= rlength) + ? ((cir_buff_depth - 1) * 4) + : (len - cur)); + head.fields.length = slength; + head.fields.reserved = 0; + /* + * send the current packet + * (cur should be treated as index for message) + */ + status = send_heci_packet(&head, + get_dword_length(head.fields.length), msg); + if (status != 0) + break; + /* update the length information */ + cur += slength; + msg += cur; + } + if (!status) + break; + } + return status; +} + +static int +recv_heci_message(void *message, u32 * message_size) +{ + union mei_header head; + int cur = 0; + u8 retry; + int status = -1; + int msg_complete = 0; + u32 pkt_buff; + + for (retry = 0; retry < MAX_HECI_MESSAGE; retry++) { + if (wait_heci_ready() != 0) + continue; + /* HECI is ready */ + while ((cur < *message_size) && (msg_complete == 0)) { + pkt_buff = *message_size - cur; + status = recv_heci_packet(&head, message + (cur >> 2), + &pkt_buff); + if (status == -1) { + *message_size = 0; + break; + } + msg_complete = head.fields.is_complete; + if (pkt_buff == 0) { + /* if not in middle of msg and msg complete bit + * is set then this is a valid zero length msg + */ + if ((cur == 0) && (msg_complete == 1)) + status = 0; + else + status = -1; + *message_size = 0; + break; + } + cur += pkt_buff; + } + if (!status) { + *message_size = cur; + break; + } + } + return status; +} + +static int send_heci_reset_message(void) +{ + int status; + struct reset_reply { + u8 group_id; + u8 command; + u8 reserved; + u8 result; + } __attribute__ ((packed)) reply; + struct reset_message { + u8 group_id; + u8 cmd; + u8 reserved; + u8 result; + u8 req_origin; + u8 reset_type; + } __attribute__ ((packed)); + struct reset_message msg = { + .cmd = MKHI_GLOBAL_RESET, + .req_origin = GR_ORIGIN_BIOS_POST, + .reset_type = GLOBAL_RST_TYPE + }; + u32 reply_size; + + status= send_heci_message(&msg, sizeof(msg), + BIOS_HOST_ADD, HECI_MKHI_ADD); + if (status != 0) + return -1; + + reply_size = sizeof(reply); + if (recv_heci_message(&reply, &reply_size) == -1) + return -1; + /* get reply result from HECI MSG */ + if (reply.result != 0) { + printk(BIOS_DEBUG, "%s: Exit with Failure\n", __func__); + return -1; + } else { + printk(BIOS_DEBUG, "%s: Exit with Success\n", __func__); + return 0; + } +} + +int send_global_reset(void) +{ + int status = -1; + union me_hfs hfs; + + /* Check ME operating mode */ + hfs.data = me_read_config32(PCI_ME_HFSTS1); + if (hfs.fields.operation_mode) + goto ret; + + /* ME should be in Normal Mode for this command */ + status = send_heci_reset_message(); +ret: + return status; +} diff --git a/src/soc/intel/skylake/me_status.c b/src/soc/intel/skylake/me_status.c deleted file mode 100644 index 79d4dfb7d6..0000000000 --- a/src/soc/intel/skylake/me_status.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Google Inc. - * Copyright (C) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static inline void me_read_dword_ptr(void *ptr, int offset) -{ - u32 dword = pci_read_config32(PCH_DEV_ME, offset); - memcpy(ptr, &dword, sizeof(dword)); -} - -/* HFSTS1[3:0] Current Working State Values */ -static const char *me_cws_values[] = { - [ME_HFS_CWS_RESET] = "Reset", - [ME_HFS_CWS_INIT] = "Initializing", - [ME_HFS_CWS_REC] = "Recovery", - [3] = "Unknown (3)", - [4] = "Unknown (4)", - [ME_HFS_CWS_NORMAL] = "Normal", - [ME_HFS_CWS_WAIT] = "Platform Disable Wait", - [ME_HFS_CWS_TRANS] = "OP State Transition", - [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In", - [9] = "Unknown (9)", - [10] = "Unknown (10)", - [11] = "Unknown (11)", - [12] = "Unknown (12)", - [13] = "Unknown (13)", - [14] = "Unknown (14)", - [15] = "Unknown (15)", -}; - -/* HFSTS1[8:6] Current Operation State Values */ -static const char *me_opstate_values[] = { - [ME_HFS_STATE_PREBOOT] = "Preboot", - [ME_HFS_STATE_M0_UMA] = "M0 with UMA", - [ME_HFS_STATE_M3] = "M3 without UMA", - [ME_HFS_STATE_M0] = "M0 without UMA", - [ME_HFS_STATE_BRINGUP] = "Bring up", - [ME_HFS_STATE_ERROR] = "M0 without UMA but with error" -}; - -/* HFSTS1[19:16] Current Operation Mode Values */ -static const char *me_opmode_values[] = { - [ME_HFS_MODE_NORMAL] = "Normal", - [ME_HFS_MODE_DEBUG] = "Debug", - [ME_HFS_MODE_DIS] = "Soft Temporary Disable", - [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper", - [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message" -}; - -/* HFSTS1[15:12] Error Code Values */ -static const char *me_error_values[] = { - [ME_HFS_ERROR_NONE] = "No Error", - [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure", - [ME_HFS_ERROR_IMAGE] = "Image Failure", - [ME_HFS_ERROR_DEBUG] = "Debug Failure" -}; - -/* HFSTS2[31:28] ME Progress Code */ -static const char *me_progress_values[] = { - [ME_HFS2_PHASE_ROM] = "ROM Phase", - [1] = "Unknown (1)", - [ME_HFS2_PHASE_UKERNEL] = "uKernel Phase", - [ME_HFS2_PHASE_BUP] = "BUP Phase", - [4] = "Unknown (4)", - [5] = "Unknown (5)", - [ME_HFS2_PHASE_HOST_COMM] = "Host Communication", - [7] = "Unknown (7)", - [8] = "Unknown (8)" -}; - -/* HFSTS2[27:24] Power Management Event */ -static const char *me_pmevent_values[] = { - [ME_HFS2_PMEVENT_CLEAN_MOFF_MX_WAKE] = - "Clean Moff->Mx wake", - [ME_HFS2_PMEVENT_MOFF_MX_WAKE_ERROR] = - "Moff->Mx wake after an error", - [ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET] = - "Clean global reset", - [ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET_ERROR] = - "Global reset after an error", - [ME_HFS2_PMEVENT_CLEAN_ME_RESET] = - "Clean Intel ME reset", - [ME_HFS2_PMEVENT_ME_RESET_EXCEPTION] = - "Intel ME reset due to exception", - [ME_HFS2_PMEVENT_PSEUDO_ME_RESET] = - "Pseudo-global reset", - [ME_HFS2_PMEVENT_CM0_CM3] = - "CM0->CM3", - [ME_HFS2_PMEVENT_CM3_CM0] = - "CM3->CM0", - [ME_HFS2_PMEVENT_NON_PWR_CYCLE_RESET] = - "Non-power cycle reset", - [ME_HFS2_PMEVENT_PWR_CYCLE_RESET_M3] = - "Power cycle reset through M3", - [ME_HFS2_PMEVENT_PWR_CYCLE_RESET_MOFF] = - "Power cycle reset through Moff", - [ME_HFS2_PMEVENT_CMX_CMOFF] = - "Cx/Mx->Cx/Moff", - [ME_HFS2_PMEVENT_CM0_CM0PG] = - "CM0->CM0PG", - [ME_HFS2_PMEVENT_CM3_CM3PG] = - "CM3->CM3PG", - [ME_HFS2_PMEVENT_CM0PG_CM0] = - "CM0PG->CM0" - -}; - -/* Progress Code 0 states */ -static const char *me_progress_rom_values[] = { - [ME_HFS2_STATE_ROM_BEGIN] = "BEGIN", - [ME_HFS2_STATE_ROM_DISABLE] = "DISABLE" -}; - -/* Progress Code 1 states */ -static const char *me_progress_bup_values[] = { - [ME_HFS2_STATE_BUP_INIT] = - "Initialization starts", - [ME_HFS2_STATE_BUP_DIS_HOST_WAKE] = - "Disable the host wake event", - [ME_HFS2_STATE_BUP_CG_ENABLE] = - "Enabling CG for cset", - [ME_HFS2_STATE_BUP_PM_HND_EN] = - "Enabling PM handshaking", - [ME_HFS2_STATE_BUP_FLOW_DET] = - "Flow determination start process", - [ME_HFS2_STATE_BUP_PMC_PATCHING] = - "PMC Patching process", - [ME_HFS2_STATE_BUP_GET_FLASH_VSCC] = - "Get VSCC params", - [ME_HFS2_STATE_BUP_SET_FLASH_VSCC] = - "Set VSCC params", - [ME_HFS2_STATE_BUP_VSCC_ERR] = - "Error reading/matching the VSCC table in the descriptor", - [ME_HFS2_STATE_BUP_EFSS_INIT] = - "Initialize EFFS", - [ME_HFS2_STATE_BUP_CHECK_STRAP] = - "Check to see if straps say ME DISABLED", - [ME_HFS2_STATE_BUP_PWR_OK_TIMEOUT] = - "Timeout waiting for PWROK", - [ME_HFS2_STATE_BUP_STRAP_DIS] = - "EFFS says ME disabled", - [ME_HFS2_STATE_BUP_MANUF_OVRD_STRAP] = - "Possibly handle BUP manufacturing override strap", - [ME_HFS2_STATE_BUP_M3] = - "Bringup in M3", - [ME_HFS2_STATE_BUP_M0] = - "Bringup in M0", - [ME_HFS2_STATE_BUP_FLOW_DET_ERR] = - "Flow detection error", - [ME_HFS2_STATE_BUP_M3_CLK_ERR] = - "M3 clock switching error", - [ME_HFS2_STATE_BUP_CPU_RESET_DID_TIMEOUT_MEM_MISSING] = - "Host error - CPU reset timeout, DID timeout, memory missing", - [ME_HFS2_STATE_BUP_M3_KERN_LOAD] = - "M3 kernel load", - [ME_HFS2_STATE_BUP_T32_MISSING] = - "T34 missing - cannot program ICC", - [ME_HFS2_STATE_BUP_WAIT_DID] = - "Waiting for DID BIOS message", - [ME_HFS2_STATE_BUP_WAIT_DID_FAIL] = - "Waiting for DID BIOS message failure", - [ME_HFS2_STATE_BUP_DID_NO_FAIL] = - "DID reported no error", - [ME_HFS2_STATE_BUP_ENABLE_UMA] = - "Enabling UMA", - [ME_HFS2_STATE_BUP_ENABLE_UMA_ERR] = - "Enabling UMA error", - [ME_HFS2_STATE_BUP_SEND_DID_ACK] = - "Sending DID Ack to BIOS", - [ME_HFS2_STATE_BUP_SEND_DID_ACK_ERR] = - "Sending DID Ack to BIOS error", - [ME_HFS2_STATE_BUP_M0_CLK] = - "Switching clocks in M0", - [ME_HFS2_STATE_BUP_M0_CLK_ERR] = - "Switching clocks in M0 error", - [ME_HFS2_STATE_BUP_TEMP_DIS] = - "ME in temp disable", - [ME_HFS2_STATE_BUP_M0_KERN_LOAD] = - "M0 kernel load", -}; - -void intel_me_status(void) -{ - struct me_hfs _hfs, *hfs = &_hfs; - struct me_hfs2 _hfs2, *hfs2 = &_hfs2; - struct me_hfs3 _hfs3, *hfs3 = &_hfs3; - - me_read_dword_ptr(hfs, PCI_ME_HFSTS1); - me_read_dword_ptr(hfs2, PCI_ME_HFSTS2); - me_read_dword_ptr(hfs3, PCI_ME_HFSTS3); - - /* Check Current States */ - printk(BIOS_DEBUG, "ME: FW Partition Table : %s\n", - hfs->fpt_bad ? "BAD" : "OK"); - printk(BIOS_DEBUG, "ME: Bringup Loader Failure : %s\n", - hfs->ft_bup_ld_flr ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Firmware Init Complete : %s\n", - hfs->fw_init_complete ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Manufacturing Mode : %s\n", - hfs->mfg_mode ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Boot Options Present : %s\n", - hfs->boot_options_present ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Update In Progress : %s\n", - hfs->update_in_progress ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: D3 Support : %s\n", - hfs->d3_support_valid ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: D0i3 Support : %s\n", - hfs->d0i3_support_valid ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Low Power State Enabled : %s\n", - hfs2->low_power_state ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Power Gated : %s\n", - hfs2->power_gating_ind ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: CPU Replaced : %s\n", - hfs2->cpu_replaced_sts ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: CPU Replacement Valid : %s\n", - hfs2->cpu_replaced_valid ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Current Working State : %s\n", - me_cws_values[hfs->working_state]); - printk(BIOS_DEBUG, "ME: Current Operation State : %s\n", - me_opstate_values[hfs->operation_state]); - printk(BIOS_DEBUG, "ME: Current Operation Mode : %s\n", - me_opmode_values[hfs->operation_mode]); - printk(BIOS_DEBUG, "ME: Error Code : %s\n", - me_error_values[hfs->error_code]); - printk(BIOS_DEBUG, "ME: Progress Phase : %s\n", - me_progress_values[hfs2->progress_code]); - printk(BIOS_DEBUG, "ME: Power Management Event : %s\n", - me_pmevent_values[hfs2->current_pmevent]); - - printk(BIOS_DEBUG, "ME: Progress Phase State : "); - switch (hfs2->progress_code) { - case ME_HFS2_PHASE_ROM: /* ROM Phase */ - printk(BIOS_DEBUG, "%s", - me_progress_rom_values[hfs2->current_state]); - break; - - case ME_HFS2_PHASE_UKERNEL: /* uKernel Phase */ - printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); - break; - - case ME_HFS2_PHASE_BUP: /* Bringup Phase */ - if (hfs2->current_state < ARRAY_SIZE(me_progress_bup_values) - && me_progress_bup_values[hfs2->current_state]) - printk(BIOS_DEBUG, "%s", - me_progress_bup_values[hfs2->current_state]); - else - printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); - break; - - case ME_HFS2_PHASE_HOST_COMM: /* Host Communication Phase */ - if (!hfs2->current_state) - printk(BIOS_DEBUG, "Host communication established"); - else - printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); - break; - - default: - printk(BIOS_DEBUG, "Unknown phase: 0x%02x state: 0x%02x", - hfs2->progress_code, hfs2->current_state); - } - printk(BIOS_DEBUG, "\n"); - - /* Power Down Mitigation Status */ - printk(BIOS_DEBUG, "ME: Power Down Mitigation : %s\n", - hfs3->power_down_mitigation ? "YES" : "NO"); - - if (hfs3->power_down_mitigation) { - printk(BIOS_INFO, "ME: PD Mitigation State : "); - if (hfs3->encrypt_key_override == 1 && - hfs3->encrypt_key_check == 0 && - hfs3->pch_config_change == 0) - printk(BIOS_INFO, "Normal Operation"); - else if (hfs3->encrypt_key_override == 1 && - hfs3->encrypt_key_check == 1 && - hfs3->pch_config_change == 0) - printk(BIOS_INFO, "Issue Detected and Recovered"); - else - printk(BIOS_INFO, "Issue Detected but not Recovered"); - printk(BIOS_INFO, "\n"); - - printk(BIOS_DEBUG, "ME: Encryption Key Override : %s\n", - hfs3->encrypt_key_override ? "Workaround Applied" : - "Unable to override"); - printk(BIOS_DEBUG, "ME: Encryption Key Check : %s\n", - hfs3->encrypt_key_check ? "FAIL" : "PASS"); - printk(BIOS_DEBUG, "ME: PCH Configuration Info : %s\n", - hfs3->pch_config_change ? "Changed" : "No Change"); - - printk(BIOS_DEBUG, "ME: Firmware SKU : "); - switch (hfs3->fw_sku) { - case ME_HFS3_FW_SKU_CONSUMER: - printk(BIOS_DEBUG, "Consumer\n"); - break; - case ME_HFS3_FW_SKU_CORPORATE: - printk(BIOS_DEBUG, "Corporate\n"); - break; - default: - printk(BIOS_DEBUG, "Unknown (0x%x)\n", hfs3->fw_sku); - } - } -}