Commit Graph

192 Commits

Author SHA1 Message Date
Frank Rysanek c0c620e74a superiotool: add CR dump for W83627UHG = NCT6627UD
This commit adds "register dump capability" to
superiotool for a specific chip by Winbond/Nuvoton:
the W83627UHG   AKA   NCT6627UD  (same chip, different package).
In other words, it fills in the "CR map" definitions in winbond.c,
which so far have been void for this chip.
-
superiotool r4.0-3976-g190011e
Found Winbond W83627UHG = NCT6627UD (id=0xa2, rev=0x32) at 0x2e
Register dump:
idx 02 20 21 22 23 24 25 26  27 28 29 2a 2b 2c 2d 2e  2f
val ff a2 32 ff f0 44 00 00  ff 00 00 00 00 03 00 00  ff
def 00 a2 NA ff f0 MM 00 MM  RR 00 00 00 00 02 00 00  00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2  f4 f5
val 00 00 00 00 02 8e 00 ff  00 00
def 01 03 f0 06 02 8e 00 ff  00 00
LDN 0x01 (Parallel port)
idx 30 60 61 70 74 f0
val 00 03 78 0c 04 3f
def 01 03 78 07 04 3f
LDN 0x02 (UART A)
idx 30 60 61 70 f0
val 01 03 f8 04 00
def 01 03 f8 04 00
LDN 0x03 (UART B)
idx 30 60 61 70 f0 f1
val 01 02 f8 03 00 44
def 01 02 f8 03 00 00
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 72 f0
val 01 00 60 00 64 01 0c 82
def 01 00 60 00 64 01 0c 83
LDN 0x06 (UART C)
idx 30 60 61 70 f0
val 01 03 e8 05 80
def 01 03 e0 04 00
LDN 0x07 (GPIO 3, GPIO 4)
idx 30 e0 e1 e2 e3 e4 e5 e6  e7
val 04 ff ff ff ff ff ff ff  ff
def 00 ff 00 00 00 ff 00 00  00
LDN 0x08 (WDTO#, PLED, GPIO 5,6 & GPIO Base Address)
idx 30 60 61 e0 e1 e2 e3 e4  e5 e6 e7 f5 f6 f7
val 01 00 00 ff ff ff ff ff  ff ff ff 02 00 00
def 02 00 00 ff 00 00 00 ff  1f 00 00 00 00 00
LDN 0x09 (GPIO 1, GPIO 2 and SUSLED)
idx 30 e0 e1 e2 e3 e4 e5 e6  e7 f3
val 02 ff ff ff ff 00 ff 00  00 00
def 00 ff 00 00 00 ff 00 00  00 00
LDN 0x0a (ACPI)
idx 30 70 e0 e1 e2 e3 e4 e5  e6 e7 e8 e9 f2 f3 f4 f6  f7 fe
val 01 00 01 00 0a 00 00 00  0c 00 09 00 01 00 00 00  00 00
def 00 00 01 00 ff 08 00 00  1c 00 RR RR 3e 00 00 00  00 00
LDN 0x0b (Hardware monitor)
idx 30 60 61 70 f0 f1 f2
val 01 02 48 00 81 ff 81
def 00 00 00 00 RR RR 00
LDN 0x0c (PECI, SST)
idx e0 e1 e2 e3 e4 e5 e6 e7  e8 f1 f2 f3 fe ff
val 00 48 48 48 48 00 00 00  00 4c 50 10 23 5a
def 00 48 48 48 48 00 RR RR  00 48 50 10 23 5a
LDN 0x0d (UART D)
idx 30 60 61 70 f0
val 00 00 00 00 00
def 00 02 e0 03 00
LDN 0x0e (UART E)
idx 30 60 61 70 f0
val 00 00 00 00 80
def 00 03 e8 04 00
LDN 0x0f (UART F)
idx 30 60 61 70 f0
val 01 02 38 0a 00
def 00 02 e8 03 00

Change-Id: I834f8767b29f3148f353004edb22cfd7db5ddd56
Signed-off-by: Frank Rysanek <Frantisek.Rysanek@post.cz>
Reviewed-on: http://review.coreboot.org/3027
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-04-22 17:07:13 +02:00
Paul Menzel 72ef8881a3 libpayload, superiotool: README: Prepend `coreboot/` to path of change directory line
Nico Huber spotted [1], that commit (4d6ab4e2) [1] updating
superiotools’s `README` with the Git command line

    superiotool: Update README with Git repository URL and directory location

missed, that after `git clone` one sitll has to change into
the cloned directory.

So prepend the path with `coreboot/` to fix that. The same error
happened in the commit (e1ea5151) for libpayload [2]

    libpayload: Update README with Git repository URL and directory location

and is fixed in this patch too.

[1] http://review.coreboot.org/#/c/3019/
[2] http://review.coreboot.org/2228

Change-Id: Ib6e8b678af6276556a40ccfd52ae35ca7e674455
Reported-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3021
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-04-04 17:22:15 +02:00
Paul Menzel 4d6ab4e2ae superiotool: Update README with Git repository URL and directory location
Change-Id: I36d980cea5ca9cc67262dba809441091757e1fb5
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/3019
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-04 04:50:00 +02:00
Paul Menzel be2c6340b3 superiotool: Allow to override Makefile variables `CC`, `INSTALL` and `PREFIX`
This way for example a different compiler can easily be used.

    CC=clang make

Change-Id: I50b83554fd4826d00d87e60a30eb1f6a88834397
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2935
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29 21:32:48 +01:00
Андрей Павлов ab9b71d54c superiotool: Add support for the IT8728F Super I/O
$ superiotool -d
superiotool r4.0-3712-gd549279
Found ITE IT8728F (id=0x8728, rev=0x1) at 0x2e
Register dump:
idx 02 07 20 21 22 23 24 2b  2e 2f
val 00 0a 87 28 01 00 00 40  00 00
def NA NA 87 28 01 00 00 MM  00 00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1
val 00 03 f0 06 02 00 00
def 00 03 f0 06 02 00 00
LDN 0x01 (COM1)
idx 30 60 61 70 f0 f1
val 01 03 f8 04 00 50
def 00 03 f8 04 00 50
LDN 0x02 (COM2)
idx 30 60 61 70 f0 f1
val 00 02 f8 03 00 50
def 00 02 f8 03 00 50
LDN 0x03 (Parallel port)
idx 30 60 61 62 63 70 74 f0
val 01 03 78 00 00 07 04 08
def 00 03 78 07 78 07 03 03
LDN 0x04 (Environment controller)
idx 30 60 61 62 63 70 f0 f1  f2 f3 f4 f5 f6 f9 fa fb
val 01 0a 30 0a 20 09 00 80  00 00 20 00 f0 48 00 00
def 00 02 90 02 30 09 00 00  00 00 00 MM MM MM MM MM
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 71 f0
val 01 00 60 00 64 01 02 08
def 01 00 60 00 64 01 02 48
LDN 0x06 (Mouse)
idx 30 70 71 f0
val 01 0c 02 00
def 00 0c 02 00
LDN 0x07 (GPIO)
idx 25 26 27 28 29 2a 2c 2d  60 61 62 63 64 65 70 71  72 73 74 b0 b1 b2 b3 b4  b8 b9 ba bb bc bd c0 c1  c2 c3 c4 c8 c9 ca cb cc  cd ce cf e0 e1 e2 e3 e4  e9 f0 f1 f2 f3 f4 f5 f6  f7 f8 f9 fa fb
val 00 f3 10 00 00 00 80 00  00 00 0a 00 00 00 00 00  20 00 00 00 00 00 00 00  20 00 00 00 00 00 01 00  00 40 00 01 00 00 00 00  00 00 00 00 00 00 00 00  21 10 42 00 00 00 00 1c  00 00 00 00 00
def 00 f3 00 00 00 00 03 00  00 00 00 00 00 00 00 00  20 38 00 00 00 00 00 00  20 00 00 00 00 00 01 00  00 40 00 01 00 00 40 00  00 00 00 00 00 00 00 00  MM 00 00 00 00 00 00 00  00 00 00 00 00
LDN 0x0a (Consumer IR)
idx 30 60 61 70 f0
val 00 03 10 0b 06
def 00 03 10 0b 06

Change-Id: Ifb45d28005d78b2a99d8552b59154d11bdf44f6f
Signed-off-by: Андрей Павлов <7134956@gmail.com>
Reviewed-on: http://review.coreboot.org/2775
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-03-17 23:20:38 +01:00
Paul Menzel a46a712610 GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.

The following command was used to convert all files.

    $ git grep -l 'MA  02' | xargs sed -i 's/MA  02/MA 02/'

[1] http://www.gnu.org/licenses/gpl-2.0.txt

Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-03-01 10:16:08 +01:00
Andriy Gapon 89397fc342 superiotool: Fix for FreeBSD
Makefile still used SVNDEF on FreeBSD.

Change-Id: I45c7fbc66c33e82a2146ef7df87b63bc7edea4cd
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1554
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-03 09:26:59 +02:00
Stefan Tauner e54995a116 superiotool: Add support for Fintek F81865F/F-I register dump.
Datasheet: http://www.fintek.com.tw/files/productfiles/F81865_V028P.pdf

The code was done by Juha Tuomala <Juha.Tuomala@iki.fi> but he refused
to sign it off, or commit it for review. I'll commit it anyway with my sign-off
because it does not exceed threshold of originality for any copyright.

Change-Id: Id86267f5add539b99229f20bbe339bfb5eb20f8b
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/1496
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-09-06 19:51:05 +02:00
Guenter Roeck 21856eec59 superiotool: Dump data registers for Nuvoton chips
Add support to dump all data registers for Nuvoton chips (NCT6775F, NCT6776F,
and NCT6779D). Register contents will be dumped if the -e option is provided on
the command line.

Change-Id: I2b425b48c1f28a10ff3c1ca1d7f21c501eff74ad
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-on: http://review.coreboot.org/1150
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-12 08:13:21 +02:00
Guenter Roeck a89da0969e superiotool: Add support for function to dump superio chip data registers
Add new function dump_data() to dump a bank of superio data registers.

Change-Id: I13a58d87c14d319cfcdea1ec1d54c2b110d90f9f
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-on: http://review.coreboot.org/1149
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-12 08:13:13 +02:00
Guenter Roeck 975ffc2e0f superiotool: Add support for NCT6775F(A/B) and NCT6779D
Change-Id: I66667fcb58f6885460021f4a2024d6ba56b95f11
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-on: http://review.coreboot.org/1148
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-12 08:10:28 +02:00
Guenter Roeck 3397ceff7b superiotool: Add support for git-based version number
The superiotool Makefile extracts a version string from SVN. This does not work
with a git repository, and results in an empty version string. Use the output of
'git describe' as version string instead.

Change-Id: Idf92c02753b28ef5bcdd3b6df4a08d79ae974434
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-on: http://review.coreboot.org/1151
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-06 10:21:03 +02:00
Stefan Reinauer d7a75ece85 tell superiotool about the ITE 8772
no dumping yet

Change-Id: I4e687ca816c8d6d1c95255b0abf6a19513e23f86
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/734
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
2012-03-10 08:47:06 +01:00
Jonathan A. Kollasch cb34bba5df Add missing EOT marker.
Omitted from commit 3d1d6bb4ec

Change-Id: Id3e94d615d50f0673cc5e3fde77ed6748d26ebd3
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Reviewed-on: http://review.coreboot.org/514
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: build bot (Jenkins)
Reviewed-by: Philip Prindeville <pprindeville@gmail.com>
2012-01-03 05:26:16 +01:00
Jonathan A. Kollasch 3d1d6bb4ec superiotool: add detection and dump of Infineon SLB9635 TPM
Change-Id: If94ea5f45135a4b65bdd37532851fa0ba864bb73
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/421
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-07 22:05:21 +01:00
Jonathan A. Kollasch 522e9e9746 Avoid false detection of SMSC FDC37N972 when Infineon TPM is present
Change-Id: Ibfb3af4c5d7675a5d4e27021cbb988c2ce00fd9f
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/420
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-07 18:15:41 +01:00
Florian Zumbiehl d35906173d fix superiotool for NCT6776F
The current code exits config mode of the NCT6776F immediately after
detection, so the register dump shows all 0xffs. This patch adds code to
re-enter config mode for the register dump so that the register contents
can be read.

Change-Id: I4ad0c108b6411a665e31f55dea4b91ca77d1a5f7
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/391
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-03 13:57:46 +01:00
Stefan Reinauer 5ff7c13e85 remove trailing whitespace
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/364
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01 19:07:45 +01:00
Rudolf Marek 113c349720 Add support for AMD IMC controller.
This patch adds support to dump SIO like interface of AMD Embedded Controller
in the SB7xx and SB8xxx southbridges. Parts of the register interface are
documented in SBxxx RRG BDG.

Change-Id: Ib2ccaa3dfe33cfa8e7cba19d8ab0798286ad2f92
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/343
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-27 22:28:55 +02:00
Mathias Krause 14b67f716d superiotool: Don't compile with -Werror
Older libpci version have headers using 'long long' which isn't allowed
in ANSI C. Since we cannot control the libpci version installed in the
system nor in generall have complete control over system headers, simply
skip using -Werror in our makefile.

Change-Id: Ibc1e57bef033bf4971f4108d078222dcf168d5e3
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/210
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14 07:43:33 +02:00
Mark Norman 1866e9ca78 Add SMSC SCH3114 superio register descriptions to superiotool.
This has been tested on a Aaeon PFM-540I RevB PC104 SBC.

Change-Id: Ie02875a1fa2d90d7cc843ce745f727312f7b7aec
Signed-off-by: Mark Norman <mpnorman@gmail.com>
Reviewed-on: http://review.coreboot.org/43
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-23 23:17:37 +02:00
Uwe Hermann c55bcdecf7 superiotool: Cosmetics and coding style fixes.
Change-Id: Iacda2a9e37635d5cffc5004caf588ef3e5e09b5e
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://review.coreboot.org/18
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
2011-06-09 21:26:47 +02:00
Stefan Reinauer 3187d0267d Add (partly) support for Nuvoton NCT6776F
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6543 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-22 23:12:40 +00:00
Stefan Reinauer 5a4ae82809 cosmetic changes to superiotool's nuvoton code
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6542 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-22 23:10:35 +00:00
Ruud Schramp 18b02360b9 Add detection/dump support for ServerEngines SE-SM 4210-P01.
Note that the registers and their defaults are mostly based on educated
guessing, due to the lack of datasheet.

Signed-off-by: Ruud Schramp <schramp@holmes.nl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6484 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11 07:46:27 +00:00
Prakash Punnoor 3af120fd2b Revert r6460, add full W83627DHG-P/-PT support instead.
Add support for detecting/dumping the registers of Nuvoton W83627DHG-P/-PT.
This is a different chip than the Winbond W83627DHG (different IDs).

Signed-off-by: Prakash Punnoor <prakash@punnoor.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6468 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-29 12:02:03 +00:00
Prakash Punnoor fde7025b61 I noticed some registers of Winbond W83627DHG, which the datasheet mentions, were not dumped by superiotool. This patch adds those registers to the dump.
Signed-off-by: Prakash Punnoor <prakash@punnoor.de>
Acked-by: Marc Jones <marcj303@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6460 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-25 16:54:38 +00:00
Stefan Reinauer cff573d3a4 DirectHW fixes for coreboot utilities
See http://www.coreboot.org/DirectHW for more information

Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6454 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-18 22:08:39 +00:00
Michael Karcher 5fb8fc093f Add support for the NSC PC87364 Super I/O.
superiotool -deV output:
http://www.flashrom.org/pipermail/flashrom/2011-March/005878.html

Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6433 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-06 17:58:31 +00:00
David Hendricks b159f7ab37 add mec1308 support to superiotool
This patch also disables FDC37M81x since it has a conflicting device ID
and is not supported very well anyway.

Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Reinauer <reinauer@google.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6370 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-17 00:52:02 +00:00
Christian Ruppert 7c2eec00a2 Add support for the IT8720F Super I/O
Signed-off-by: Christian Ruppert <idl0r@gentoo.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6331 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-03 16:00:28 +00:00
Sven Schnelle ed61c4ad7e Add detection/dump support for the NSC PC87382.
It is a rather small 'Super I/O' device, containing a serial port, IR,
GPIO, and a Docking LPC switch. It is used in various Thinkpads.

Add 0x164e/0x16ef to the list of probed ports for NSC chips, as
Thinkpads are using this address pair.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6327 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-02 23:49:41 +00:00
Uwe Hermann f9bd9ae9eb Add detection support for the ITE IT8721F.
Tested on hardware by me.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6235 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01 22:05:57 +00:00
Zheng Bao 6d81646314 Add detection of Nuvoton WPCM450.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6226 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-31 01:38:45 +00:00
Stefan Reinauer d7ce71d58f superiotool: Don't skip probing on a port if a a chip was detected on another port.
Only skip probing if chip was found on the same port already to avoid
duplicates.
Signed-off-by: Stefan Reinauer <stepan@coreboot.org>
Acked-by: Stefan Reinauer <stepan@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6222 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-30 16:57:58 +00:00
Uwe Hermann d43498d1be Various Winbond/Nuvoton W83527HG fixes as per datasheet.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6205 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-20 23:40:23 +00:00
Zheng Bao ca466b2fb3 Add dump support for the Winbond/Nuvoton W83527HG.
The datasheet is available on nuvoton's website.
http://www.nuvoton.com/NuvotonMOSS/Community/ProductInfo.aspx?
tp_GUID=cf73485c-9e0a-4218-9bee-89dfe9a7bb87

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6179 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-14 02:02:34 +00:00
Zheng Bao cb6c9e0942 Add detection support for the Winbond W83527HG Super I/O.
Running result.
superiotool r6131
Found Winbond W83527HG (id=0xb0, rev=0x73) at 0x2e

The documentation is not available yet.


Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6169 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-12 14:40:29 +00:00
David Hendricks b97030d706 Add Fintek F71889 detection and dump support.
The patch was tested by a user on IRC who had the F71889FG. I
wrote it using documentation from Fintek's website available here:
http://www.fintek.com.tw/files/productfiles/F71889_V0.28P.pdf

This patch also seems to work for the F71889ED, which uses 0x09 and 0x09 for
chip ID bytes 1 & 2. However, I have not been able to find documentation to
verify that the two chips are identical from superiotool's perspective.

Signed-off-by: David Hendricks <dhendrix@google.com>
Signed-off-by: Alec Ari <neotheuser@ymail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6131 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-29 11:56:39 +00:00
Zheng Bao 0e40e6ba4d Add detection support for the Fintek F81865/F81865-I.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6024 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05 00:34:12 +00:00
Uwe Hermann 7015989464 Add small comment about LDN 5 on F71872F/FG / F71806F/FG.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5984 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-24 14:19:09 +00:00
Jonathan Kollasch 760498f8ea Fix superiotool build on non-NetBSD x86_64.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Jonathan Kollasch <jakllsch@kollasch.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5983 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-24 14:18:55 +00:00
Jonathan Kollasch 51ac8382dc Provide for I/O space access on NetBSD.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-24 14:10:35 +00:00
Idwer Vollering a4d77dc74d Update superiotool support for FreeBSD, Makefile fixes.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5980 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-24 13:42:32 +00:00
Jonathan Kollasch d74c7748aa Teach superiotool about the registers in a Fintek F71806 (and F71872).
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5979 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-24 12:43:41 +00:00
Anders Juel Jensen 28e4af5801 Add suport for normal register dumping on ite8510E/TE/G
Signed-off-by: Anders Juel Jensen <andersjjensen@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-22 19:41:47 +00:00
Anders Juel Jensen 3d0ff918f8 Add another port to find ite8510 on.
Signed-off-by: Anders Juel Jensen <andersjjensen@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5727 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-22 19:40:58 +00:00
Anders Juel Jensen 4fd7df9535 Add support for non LDN register/device naming.
Signed-off-by: Anders Juel Jensen <andersjjensen@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5726 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-22 19:40:11 +00:00
Anders Juel Jensen 280275dcb5 The LDFLAGS = -lz is needed to compile on slackware.
Clubbering CFLAGS is never a good idea.

Signed-off-by: Anders Juel Jensen <andersjjensen@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5725 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-22 19:39:04 +00:00
Stefan Reinauer e7b7ae23e6 Add support for Fintek F81216D/DG/AD
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5708 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-17 08:24:01 +00:00