crossgcc builds gmp, whose build system normally optimises for the hardware
it's built on. That may give a minor performance boost but has the downside
that the compiler becomes non-portable and may break on other systems due to
illegal instructions.
Setting CFLAGS to some reasonable value prevents gmp's configure script from
choosing CPU specific -mtune flags (which may enable optimizations that only
run on CPUs with the same feature set).
Enabling "fat" builds make the build system add all optimized assembler
routines and makes the selection of the right one a runtime decision instead
of deciding at compile time.
Change-Id: I72d20627270baa082cd02ebb4c9a09cd23f30f8c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10412
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
If the buildgcc is interrupt by Ctrl-C, probably part of
an archive is downloaded. If we run buildgcc again, the
incomplete archive would be considered as cached file
and skipped.
We check file hashes to see if the file is complete. If test
is failed, we need to delete the partially-downloaded file
and download it again.
sha1sum is quite different among the distributions.
Only Linux, Cygwin, Darwin have been tested.
Once new archive is deployed, a new checksum would be created,
which should be uploaded along with the script buildgcc.
Change-Id: Ibb1aa25a0374f774e1e643fe5e698de7bf7cc418
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/4511
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
People were confused about the 'missing toolchain', so
improve the error message.
Change-Id: Icaee338aeedce2255bcfdafe5407c9df02ad9c4a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10036
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Since FreeBSD doesn't have libdl, these errors are shown:
- config.log: /usr/bin/ld: cannot find -ldl
- crossgcc-build.log: configure: error: C compiler cannot create executables
Conditionally pass the presence of libdl in LDFLAGS.
Change-Id: I79c48da7e6700a4606c9e0c1314241db8997d3f3
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/2342
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
No need to enforce GNU versions for them.
Change-Id: Ieeb43298331fbefbcc1e230d41a90e9df56993eb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10017
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
bzip2 --version |grep -c will wait for input on stdin. ./buildgcc will hang because of this.
Add `cat /dev/null |` close the stdin.
Change-Id: I2a8b08a4d90ca7a89705923d5b68ba6ac13f29b3
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9605
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Copy $0 contains the path, and we cd into that early.
Change-Id: If4124d16dea97b5eee4996bdfa3eae3d5d94c5d1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/9145
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
The build system expects mipsel, and it's the more
precise name, too.
Change-Id: I9e1135385b3f1374b3179ecf5e11a1d60bc17ef7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9144
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Instead of repeating the ok/failed test all the time,
move it into a function.
Change-Id: I7496dfb5d3d2385316c577e1cf0901950b0e7083
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8987
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The first problem for crossgcc users that encounter build errors is
figuring out what is wrong with the build. Point out where the logs
reside.
Change-Id: I0300ecf6356c1a4ce18ae1e37fe0a56f46210d13
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/8982
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ie002c69ab23cfc961b77771c4f2c20e5ae6bea60
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8633
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We use paths relative to that in the buildgcc script.
Change-Id: I2b79c3d2c75088af7e8e362d18a38274352eb965
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8713
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
You can build your new toolchain with:
$ cd util/crossgcc/
$ ./buildgcc -d /opt/cross -p x86_64-elf -j 16
or
$ make crossgcc-x64
Change-Id: I8eb584166294578d2b33c63e94ed3aca9b5de4f4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8668
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
GCC's build system is sometimes confused by our build system's
configuration: make crossgcc failed, while
util/crossgcc/buildgcc -p armv7-a-eabi didn't.
Make sure the GCC build system runs independently from
ours by breaking any ties.
Change-Id: I563e17b22127bc8c83ebfb17252184a3b6e0e58b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8545
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch introduces support for building a MIPS cross compiler
targetting little endian machines by default.
Original-Change-Id: I116f6f431cdf80f5f5f58d2743357a9f70a7347d
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/207970
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit d6c9603c41b3d11400cee7b5b409203af0632aa2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I543cd2276d2f63ed2036a1c1259c9a07cb8a4ba8
Reviewed-on: http://review.coreboot.org/8518
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The following changes are included.
Changes in version 1.0.3:
- Fixed mpc_pow, see
http://lists.gforge.inria.fr/pipermail/mpc-discuss/2014-October/001315.html
- #18257: Switched to libtool 2.4.5.
Changes in version 1.0.2:
- Fixed mpc_atan, mpc_atanh for (+-0, +-1), see
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57994#c7
- Fixed mpc_log10 for purely imaginary argument, see
http://lists.gforge.inria.fr/pipermail/mpc-discuss/2012-September/001208.html
Upgrading also fixes the issue, where for example running `make crossgcc-arm`
ails as MPC cannot be built.
Building MPC 1.0.1 ... failed
As it worked for others, it turns out that I had a release archive for
MPC 1.0.1 cached from October 2014, which was generated incorrectly, so
that `./configure` and `Makefile` are missing.
$ LANG=C ls -l util/crossgcc/tarballs/mpc-1.0.1.tar.gz
-rw-r--r-- 1 joey joey 224232 Oct 19 2013 util/crossgcc/tarballs/mpc-1.0.1.tar.gz
$ md5sum util/crossgcc/tarballs/mpc-1.0.1.tar.gz
22a27bee89616dca4d654fc579a816e5 util/crossgcc/tarballs/mpc-1.0.1.tar.gz
$ md5sum mpc-1.0.1.tar.gz # downloaded today
b32a2e1a3daa392372fbd586d1ed3679 mpc-1.0.1.tar.gz
So upgrade to MPC 1.0.3 as the release archive as of today contains the
needed files.
$ md5sum util/crossgcc/tarballs/mpc-1.0.3.tar.gz
d6a1d5f8ddea3abd2cc3e98f58352d26 util/crossgcc/tarballs/mpc-1.0.3.tar.gz
Change-Id: Ibfd02a9b362b12361b210d512420b87caebb0fdf
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
TEST:Run `make crossgcc-arm` and observe `Building MPC 1.0.3 ... ok`.
Reviewed-on: http://review.coreboot.org/8521
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
A leading double slash can result when $DESTDIR/$TARGETDIR is expanded
in the libelf portion of buildgcc. The leading double slash causes buildgcc to fail when run from Windows/Msys2. Replace $DESTDIR/$TARGETDIR
with $DESTDIR$TARGETDIR to avoid the problem.
Change-Id: Ide2bae41c07c1566f80104c3a2e2acab53de0d17
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/7788
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
We already have aarch64 targets. Extend the "all" target.
Change-Id: I74d9bf5123695318c15b73c89f170f3ebb20aa80
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7729
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
The libelf build system doesn't support the
DESTDIR variable. Work around by mangling prefix
when installing.
Change-Id: I3a56eb2bf919bcb9b586b945dce26a02dbaff931
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7613
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This adds the crosstools-aarch64 and crossgcc-aarch64
make rules to create a toolchain (with or without gdb)
for AArch64 targets.
Also adapt xcompile, since it's aarch64-elf.
Change-Id: I6fbe09d44ee8b8493d3cd8dbbba869b409e311f7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7527
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
gcc 4.9.2 fails on our tree right now. We should clean that
up and test before we make it the reference version.
Also, the AMD K8/Fam10 issue we had last year, for which
Vladimir provided an "untested" fix (which is in,
commit a6c29fe684), isn't
reproducible: I boot-tested an unpublished AMD K8 board
with coreboot built with gcc 4.8.3.
(Disclaimer: since the old issue depended on compiler
decisions on register allocation, any change to code
or compiler could mix up things in semi-random ways.)
Change-Id: I8f1460a8da2c9e2d581482b22a4824b10b8987fa
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7526
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Unlike OSX 10.8, OSX 10.9 doesn't provide GNU tar program, and built-in
tar program is bsdtar 2.8.3. bsdtar can build crossgcc toolchain.
Modify buildgcc to support tar in OSX 10.9 (uname = Darwin).
Change-Id: I093898f8f99e29918387f9b275a30af461a7e1be
Signed-off-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-on: http://review.coreboot.org/5598
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Refactor Makefile build system as decompartmentalise armv7a and i386
targets from crossgcc.
Change-Id: If93f62050810ba594c9925a9eb8ba9d04bc76459
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/4008
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
cleanup() uses BUILDDIRPREFIX, which is set after the
getopt loop.
Change-Id: I8a904781ee4fefc42681d31e94b64008cf03750a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4544
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
If the unpacking was interrupt by Ctrl-C, probably part of
an archive is unpacked. If we run buildgcc again, the
incomplete folder would be and skipped.
We can create a file to tell the script the unpacking is done.
Change-Id: Id9eb74d119e22b62c70dca9b38a92c3dbdf0f64c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/4512
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
gcc 4.8.x has issues with using ebp, which broke some builds,
so downgrade. The problem also manifested elsewhere, so it's
not necessarily our fault.
While at it, gcc complained about "armv7a" where it seems to
expect "armv7-a".
Change-Id: I6f0c35f49709cb41022475bb47116c12ab1c7ee3
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/3930
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This simplifies debugging and also fixes an issue when build directories
are kept between buildgcc runs for different architectures.
Change-Id: I5badccd3368e3014680da3eedb607119fff8fa7f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3929
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
acpica-unix-20130626 doesn't use bin32 and bin64 to save the objects
any more.
Change-Id: I419ecc987e2adcd860a8ad1bf2f6b5c4dd40fd8a
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/3885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
While some of the case .. break statement actually weren't needed,
too are, since otherwise the option parsing loop hangs.
Exit conditions for that endless loop: "--" or no more arguments,
in line with GNU command line parsing rules.
Change-Id: I0dbc35e530fb8c93a0f7de05ac47f325555ad4a4
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3418
Tested-by: build bot (Jenkins)
Reviewed-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
Bash case statements are terminated with ';;'.
Unlike C, bash case statements will not continue to the next case. No 'break' is needed.
Change-Id: I62e7e91f3223ac4052728a1ca12a4681af0dc036
Signed-off-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
Reviewed-on: http://review.coreboot.org/3330
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
buildgcc has many wrong choices, and two right ones,
but you would never guess that. It's even more
frustrating when it spends lots of time building a
full tool chain and you find out it's not the one you
wanted and, still worse, you've forgotten what it does want
and, even worse, it won't f-ing tell you what the two
right choices are!.
Have it tell you when you've done something wrong, and have it
make reasonable decisions when you say things like
-p arm
instead of
-p armv7a-eabi
This change lowers my blood pressure 10 points.
Change-Id: I44a59d7cb7a6260894d8bcb692a693ed25681ff8
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/3292
Tested-by: build bot (Jenkins)
Update crossgcc to use gcc 4.7.3
The resulting coreboot.rom is not runtime tested (any volunteers?).
Drop the texinfo patch, rename the armv7a patch.
Some Linux distributions have moved on to gcc 4.8,
under certain circumstances this version can't (cross-)compile gcc 4.7.2
Bug report: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=56927
Change-Id: Id8ce5f86c34e1a0900d44dc6ae4e81cb9548ecc2
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/3112
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The URL to acpica-unix-20121114 has changed, update the URL.
Change-Id: I1c8c228094f19455af3682f36f1990586fe3934c
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/3070
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If you have a recent version of texinfo installed, building the reference
toolchain fails with the following error:
(in util/crossgcc/build-gcc/crossgcc-build.log)
[...]/gcc-4.7.2/gcc/doc/cppopts.texi:806: @itemx must follow @item
Looks like a warning-became-an-error problem in texinfo, to me. Fix that by
making every erroneous @itemx an @item.
Change-Id: I685ae1ecfee889b7c857b148cfab7411a10e7ecd
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/2939
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.
The following command was used to convert all files.
$ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/'
[1] http://www.gnu.org/licenses/gpl-2.0.txt
Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
On hosts using non-GNU make as default make program (ex, FreeBSD's default is
BSD make and having GNU make as "gmake"), building acpica will fail. We should
use the correct path of make $(MAKE).
Verified to build on FreeBSD 9.0 with gcc 4.7 from ports. Note, the shipped gcc
in FreeBSD 9.0 is 4.2.1 and needs more patches to remove -Wbad-function-case and
-Wempty-body. That should be fixed in a future patch.
Change-Id: Iacbf5a05e84a8a53d9d3e783a10131de603282c9
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2333
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In case that the new toolchains don't work well, we can trace back
and reproduce the old tools by checking the xgcc folder. It is useful
when my team members need to get my old toolchains on their own host
machines.
Change-Id: I54e4bc6afcfbbf622165af6eae27bbb6efc2e8cc
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2247
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The ARMv7 toolchain is now also needed for abuild (at least
if you want to be able to compile ARM images)
Change-Id: If1253203a2198f7dea632ba45540222ba3361932
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2147
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Patrick Georgi