This patch adds support for Intel Xeon-SP.
This patch is developed and verified with Skylake Scalable
Processor, which is a processor in Xeon-SP family. The code
is expected to be reusable for future geneations of Xeon-SP
processors, and will be updated with smaller targeted
patches accordingly, to add support for additional Xeon-SP
processors, to add features, and to improve the code base.
The Skylake-SP FSP is based on FSP 2.0. The FSP is a
proof-of-concept build. The binary is not shared in public,
when this patch is upstreamed.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Tested-by: johnny_lin@wiwynn.com
Change-Id: Idc9c3bee17caf8b4841f0bc190cb1aa9d38fc23e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
CB:38541 ("ec/google/chromeec: Add SSDT generator for ChromeOS EC")
added a new device_operations structure for chromeec for handling ACPI
SSDT generation. However, this resulted in the original
device_operations which handled lpc read resources to be skipped. This
change fixes the above regression by combining the device operations
for reading resources and ACPI SSDT generation into a single structure
and retains the old logic for enabling of pnp devices.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3a242f4b15603f957e0e81d121e5766fccf3c28d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The register TCO1_STS is never cleared, which will cause SMIs to either
retrigger over and over again (e.g. TIMEOUT) or prevent concurrent
interrupt events, depending on which event triggered.
Clear both TCO2_STS and TCO1_STS.
This also fixes the issue where SECOND_TO_STS will always end up set in
the SMI handler by unconditionally (re)setting it.
Tested on X11SSM-F, where enabling TCO caused the terminal to get
flooded with SMI debug messages. With this patch, a message gets written
every ~1 second.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ia57c203a672fdd0095355a7e2a0e01aaa6657968
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39259
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We include it only in one file. So let's simplify everything and do like
autoport does.
Change-Id: I71f092ed7582b4931122d72f41d0b42a7569b96e
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Move channel loop at the top level to deduplicate the logic.
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: Iea623d1bd1f7d736e81f66f191a1bf8476d30404
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
The TX window will offset to edge during DVFS switch, which may cause
TX data transmission error and random kernel crash. Therefore, use the
standard dqsosc (DQS Oscillator) for TX window tracking.
BUG=b:142358843
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: Idcf9213a488e795df3faf64b03588cfe55cb2f81
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Because eMCP and discrete DDR devices have different DVFS tables, their
EMI bandwidth thresholds should also be different. When the EMI total
bandwidth reaches the threshold, the system will notify DVFS module to
perform DVFS switch for system performance in low power states.
This patch increases the threshold from 0xa to 0xd for eMCP DDR devices
so that DVFS switch will be less likely to happen.
The register table of EMI_BWCT0 is incorrect in the datasheet. According
to the hardware design, BW_2ND_INT_BW_THR should be in bits [30:24]
instead of [22:16]. However, the logic in DRAM driver is correct,
aligned with the hardware design, so we don't need to correct it.
BRANCH=kukui
BUG=b:142358843
TEST=bootup pass
Change-Id: I82c3c70bcd90df3fdd613c0353aba0f176bc82bc
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39034
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is no need to set the NpkEn option to disable the NPK device,
since it has already been done in the devicetree.
Change-Id: I429f1129dc4149067503cd2ff9fb4c76cdc919f0
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Allows to override the PortUsb20Enable and PortUsb30Enable FSP options
(which are set to 1 by default) to enable/disable USB ports if the
usb_config_override flag is set to "1". Therefore, these changes will
not affect other boards with an Apollo Lake processor.
Change-Id: Ia94a2be1647f7743ef0c918ae3b34437a179261c
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add a new ripto variant based off of the volteer baseboard design.
BUG=b:148385924, b:150810535
TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto image
and verify ripto boots to the kernel.
Change-Id: If7606588147500a465f16c7846e2c8429ece93ec
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: caveh jalali <caveh@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Enable VBOOT support on all devices that have a 12 MiB flash, using
RW_MAIN_A + RW_MAIN_B partition, allowing the use of tianocore payload
in both RW_MAIN_A, RW_MAIN_B and WP_RO.
* Add VBNV section to cmos.layout
* Add FMAP for VBOOT
* Select Kconfigs for VBOOT
* Enable VBOOT_SLOTS_RW_AB by default
The VBNV is intentionally not covered by the CMOS checksum.
Tested on x230 and T440p.
Change-Id: I8a35a06ece1e9d57a2ef23970e61ae26fafce543
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Jonas Moehle <ad-min@mailbox.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This is a port of https://review.coreboot.org/c/coreboot/+/22337 to the
Haswell northbridge. This code is necessary to support the dGPU of the
t440p. Code was cut and pasted from Sandy Bridge with vendor IDs updated
to the correct Haswell values. Tested on t440p with dGPU on Ubuntu
18.04.4 with 5.3.0-28 kernel. Without patches dmesg reports Nouveau is
unable to read the VBIOS of the dGPU as it has an invalid checksum (I
checked that the ROM in CBFS is correct). With this patch DRM works
correctly with both the Nouveau driver and the Nvidia proprietary
driver. Windows 10 1909 also tested but generates bluescreen once GPU
driver is loaded.
Change-Id: Ie5f089fb6fd774e6c61f4f9281e2945bd44edf27
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Use the ifdtool --output flag to modify coreboot.pre inplace, instead
of using the `mv` command to get the same result. In this way the stdout
will make more sense in the build context.
Change-Id: I6dacc8b39052801c770c02fa2aa1b526747ae496
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Coverity detects pointer dev as FORWARD_NULL. Add sanity check
for dev to prevent NULL pointer dereference.
BUG=CID 1353148
TEST=Built and boot up to kernel.
Change-Id: Ic0ad1ec79c950a3c17feccdde4f87f4a107fe8c0
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This reverts commit 2b9004de60.
Reason for revert: QEMU emulates that chipset and with that commit a Linux guest kernel can't find IDE devices anymore.
Change-Id: Iad75af4ea9993d6a2ec5433ad30d39900dab874e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39238
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Keith Hui <buurin@gmail.com>
This also drops individual copyright notices, all mentioned authors in
that part of the tree are listed in AUTHORS.
Change-Id: Ib5a92bb46ff2b9d2928aae3763daec71747044c2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This also drops individual copyright notices, all mentioned authors in
that part of the tree are listed in AUTHORS.
Change-Id: I770c1afd9b68a40ec0e69818f24b5ef3ad4f1d35
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This also drops individual copyright notices, all mentioned authors in
that part of the tree are already listed in AUTHORS.
Change-Id: I19b1c379b474dd011e2d0f8c8202ff1351c9290d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This also drops individual copyright notices, all mentioned authors in
that part of the tree are already listed in AUTHORS.
Change-Id: Ic5eddc961d015328e5a90994b7963e7af83cddd3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This also drops individual copyright notices, all mentioned authors in
that part of the tree are already listed in AUTHORS.
Change-Id: Ic2bab77edaf7ad97b7f3278cb108226a18cf3791
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
If the ChromeOS EC uses EC early firmware selection (EFS), the AP vboot
build must also enable EC EFS. Puff EC uses EFS, so enable it in the AP
vboot build.
BUG=b:150742950
TEST=Puff can boot with EC EFS with hardware write protect enabled
BRANCH=none
Signed-off-by: Sam McNally <sammc@chromium.org>
Change-Id: I0877000b7d277106436831f2d69775c25299da9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
If the ChromeOS EC uses EC early firmware selection (EFS), the AP vboot
build must also enable EC EFS. Add an option to control this, passing it
through to vboot.
BUG=b:150742950
TEST=none
BRANCH=none
Signed-off-by: Sam McNally <sammc@chromium.org>
Change-Id: I697e90748e19d15af154011413b30c0f2a0bf52e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This reverts commit c8b0f31ca1.
Bumping the FADT table version from 3 to 6 causes
Windows 10 to BSOD with an ACPI BIOS error or simply
fail to boot on multiple platforms (Haswell, Broadwell,
Braswell, Skylake). Revert until the issue can be properly
identified and corrected.
Change-Id: I261d953321df2616a3f1c3460a535b57a8848315
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The cache as ram code will use one form of a non-eviction mode.
Change-Id: I418eb48434aa3da3bf5ca65315bb8c9077523966
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The memNTrainFlowControl array is generating Coverity warnings
in multiple places in code where it attempts to write to index 1.
The array is defined as either 2 elements or 1 of NULL depending
on #if (AGESA_ENTRY_INIT_POST == TRUE). This is likely a false
alarm from Coverity (memory should not be training outside of a
POST), but adding a second NULL element for the
AGESA_ENTRY_INIT_POST == FALSE case. Tested on Lenovo G505s.
Change-Id: Iaebe0830471e1854d6191c69cdaa552f900ba7a6
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Found-by: Coverity CID 1357451, 1357452, 1357453
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38176
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Potential for out-of-bounds read. However, this code is not
used on F14, F15tn, or F16kb platforms. As can be seen in
vc/amd/agesa/f15tn/Config/PlatformInstall.h only multiple
socket F10 is supported. Tested on Lenovo G505s.
Change-Id: Ib71fe32d89840b9f25619d74980e562fd626952b
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Found-by: Coverity CID 1241831
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
AllocParams.Persist is used uninitialized when calling
HeapAllocateBuffer. This could lead to unpredictable or
unintended results. The f15tn and f16 versions of
AmdS3Save.c have already addressed this by initializing
AllocParams.Persist=0 in the same location in the code,
so adding to f14 only.
Change-Id: I2cbfbc4ad14a861e0cd92f130209b3b0f5b76a17
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Found-by: Coverity CID 1241806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Uninitialized variable will contain an arbitrary value left from
earlier computations. This issue has already been addressed
in the f15tn and f16kb versions of this same file, so am
backporting the fix.
Change-Id: Id876107265689e08ad6760e514a4911f32b53da7
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Found-by: Coverity CID 1241856
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38048
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The generic MemNProgramNbPstateDependentRegistersUnb function is unused,
and generates a Coverity warning of an unused switch case. Only family
specific versions of this function are called elsewhere. Delete unused
function.
Change-Id: I2afc83861f4b3a13bfc1eef4920cd3023e608e94
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Found-by: Coverity CID 1241810
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38493
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both T530 and W530 share the same PCI device id of 0166 for the iGPU.
Change-Id: Idce809e3820a653144db424aff1c55b70c4c693a
Signed-off-by: Prasun Gera <prasun.gera@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Looks like it should select it like any other Lenovo xx20/xx30 boards
around.
UNTESTED.
Change-Id: Iaa4983c0a6365d77ac647f68d112a405d782d501
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
These two variables are initialized to zero by default.
Change-Id: I590f601b5297a9bfa93607442d7e0b8d79f1ab51
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Only whitespace changes, minor comments. This helps making diff between
devicetrees shorter.
Change-Id: Ia1a84728abbece96a3d05b3b1616ac58535845bc
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some local functions need renaming to avoid name collision.
Change-Id: I0ca311c12f013e54e23ff0427421bfad0b747ea6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37195
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
"amdfam10" is no more.
Change-Id: Ibf4892bb4076eb88b864fc0e894b986bf6f6e5bf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38054
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current elog implemetation searches for an active PME status bit by
iterating the PCI devices. On disabled or hidden devices a BUG gets
triggered: BUG: pch_log_rp_wake_source requests hidden ...
This is caused by the use of the PCH_DEV_* macros which resolve to
_PCH_DEV and finally call pcidev_path_on_root_debug.
Disabled devices are skipped already so we can safely use the DEVFNs
instead, circumventing the BUG.
Change-Id: Id126e2c51aec84a4af9354b39754ee74687cefc8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Lock MSR MSR_PKG_CST_CONFIG_CONTROL on all cores, not only the one
handling APM_CNT_FINALIZE.
Tested on HP Z220: FWTS no longer reports this as an issue.
Change-Id: I174d6c6c74fbba47992084cc44ebddf84eeeabd1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Make the variable override for CPU_MICROCODE_CBFS_EXTERNAL_BINS local to
the target. Otherwise, `cpu_microcode_bin +=` lines that are evaluated
after `src/cpu/Makefile.inc` still append to it.
Change-Id: If81f307afc325ff3c1e987e9483ed5e45fdc403e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This commit is adding a dependency check for the FSP_USE_REPO
config option which so far was not able to deal with Denverton
systems.
Change-Id: I615305da5865bef305f560f5c90482cf0937b25a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Leverage the common sku id space helper encoders.
dedede uses the non-legacy SKU ID space.
squash in,
mainboard/google/dedede: Migrate onto get fw_config helper
BUG=b:149348474
BRANCH=none
TEST=only tested on hatch
Change-Id: I0c21a748fddef0985022cb4e77a8db95d6692f4b
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Leverage the common sku id space helper encoders and
set the sku id max to 0xff for legacy to ensure we
behave the same.
BUG=b:149348474
BRANCH=none
TEST=tested on hatch
Change-Id: I60a37a5f9659b8df4018872956f95e07a3506440
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Adapted from implementation in sb/intel/common.
Test: build/boot variants of google/{beltino,slippy}
with Tianocore and SMMSTORE enabled
Change-Id: I64f520d17146206b8b9b41fc4f827539c5cfd507
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Adds PAD_CFG_NF_BUF_IOSSTATE_IOSTERM macro to configure native function,
iosstate, iosterm and disable input/output buffer. This is used in the
pad configurations for the Kontron COMe-mAL10 module board [1].
[1] https://review.coreboot.org/c/coreboot/+/39133
Change-Id: I7aa4d4dee34bd46a064079c576ed64525fd489e6
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable read SAR value from cbfs.
BUG=b:150347463
TEST=NA
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I5f27b6f7245669728e3e394e9c6a39c11bfda3b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Use CPU_QEMU_X86 as it is selected by both Qemu x86 mainboards.
Change-Id: I8d6bfbddeeb8f2c66c5ea7728a9919e7cda86e7e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Only some mainboard vendors have a prompt for this option. Let's be fair
and give this ability to everyone.
Change-Id: I03eec7c13d18b42e3c56fb1a43dc665d5dbd1145
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
They are downright useless and result in ACPI errors. So, burn them.
Also, do a minor update to autoport's README about these values.
Change-Id: Idb5832cfd2e3043b8d70e13cbbe8bd94ad613120
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add gpio definition for Jasper Lake gpio controller.
Also created a separate file for JSL and TGL gpio keeping common asl file.
gpio_soc_defs.h must pass correct information/macro values to asl file
for code to work.
GPIO controller includes 4 gpio community and 10 groups. Patch adds
definition for all gpio within community and groups
Updated IRQ mapping for all gpios
TEST=Check if jslrvp and tglrvp code is compiling
Change-Id: Iae4e694ecb30658e43c5ed99e5436579fd7d2ed2
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
There is no reason to hide the GDB_STUB option when CONSOLE_SERIAL is
not set.
Change-Id: Icbf9a1ac0e617939cafa3d66774bbd467dc01cbc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This allows reuse of dev and reg32 already available,
and converting the block from #if to simple if.
Change-Id: I7a56f5a170986bbdf3c0c87eb5ead838ad55c659
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
All boards using this code use i82371eb (that shares PCI ID with i82371ab).
Dropping the code lightens compressed ramstage by a few dozen bytes.
Change-Id: Iab1e83b8f5fff44a33619c7925e5448169a2a87c
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38598
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update memory parameters based on memory type supported by dedede
1. Update dq/dqs mappings
2. Update spd data for Micron Memory
3. Add SPD data binary files for supported memory types
4. Update other FSPM UPDs as part of memory initialization
BUG=none
BRANCH=none
TEST=Build dedede, flash and boot to kernel.
Change-Id: I7248861efd1ecd5a0df0e17d39a44c168cab200e
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39136
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
XOE# and XDIR# can be used as GPOs 23/22 if X-Bus functionality is not
required. Turns out asus/p2b-ls is using them to control termination
for the onboard SCSI buses. Add support to allow this reconfiguration.
Change-Id: I2dab6fafbd67a98ed1cac1ffcf9352be4a87c3e9
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since there is only one device ID used for UART,
an array is not needed. Therefore, just save the
device ID to the device variable.
Change-Id: Icd325e1102a85cc175f6025519a47a1b64ee5b46
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch moves the PCI ID definitions to pci_ids.h file
and replaces every occurrence with the new names.
The resulting binary doesn't differ from the one
without this patch.
Used documents:
- Intel 337018
Change-Id: Ib7d2aae78c8877f3c9287d03b20a5620db293445
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
soc//picasso is intended to be forward-compatible with the Dali APU, a
Family 17h Models 20h-2Fh product. Add the one new device ID it has.
See PPR document #55772 (still NDA only) for more information.
Change-Id: I7e9b90bb00ae6f4a121f10b1467d2ca398ac860c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The dot is not needed, as it is no sentence and followed by a line
break.
Change-Id: I3905853eb7039f9c6d2486a77da47a4460276624
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30806
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix two out-of-bounds reads in lz4 decompression:
1) LZ4_decompress_generic could read one byte past the input buffer when
decoding variable length literals due to a missing bounds check. This
issue was resolved in libpayload, commonlib and cbfstool
2) ulz4fn could read up to 4 bytes past the input buffer when reading a
lz4_block_header due to a missing bounds check. This issue was resolved
in libpayload and commonlib.
Change-Id: I5afdf7e1d43ecdb06c7b288be46813c1017569fc
Signed-off-by: Alex Rebert <alexandre.rebert@gmail.com>
Found-by: Mayhem
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Previously, each Intel chipset had its own sleepstates.asl file.
However, this is no longer the case, so drop these comments.
This follows commit 408d1dac9e.
Change-Id: I0c0f4ad8bf743010ebdd2d53fcf297aeab64a662
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
It provides no useful information, so it might as well vanish.
This follows commit 0142d441c6.
Change-Id: Iad41d8d39c6712cebfa5245f37bc69061b5ac552
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This time, it failed to build if measured boot was not enabled. Fix this
problem, and make sure flashconsole will not break like that again.
Change-Id: I5f5ffd14a3225804524cb0c1518e3d99737e0a93
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The VBOOT code can be compiled but it asserts with:
ASSERTION ERROR: file 'src/security/vboot/common.c', line 40
Start VBOOT in bootblock to fix the assertion.
Tested on Lenovo X220:
The assertion is gone, the platform boots again.
Change-Id: I48365e911b4f43aecba3b1f950178b7ceed5b2e9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Some of the revision 4 FADT fields were already updated to ACPI
spec revision 6, but not all of them. In addition the advertised
FADT revision was 3.
Implement all fields as defined in version 6 and bump the advertised
FADT revision to 6.
Change-Id: I10c1e2517df41159ab9b04f763d3805ecba50ffa
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39157
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is new elan touch screen IC, which includes touch panel and USI pen.
BUG=b:149800883
BRANCH=octopus
TEST=build bios and verify touch screen works fine
Signed-off-by: Tommie Lin <tong.lin@bitland.corp-partner.google.com>
Change-Id: Ibec3d08cc740e398a10a5c845181318724afc70a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Disable EPS on the SKUs that do not have it.
Change-Id: I7305097beea3484634933ab856fd084933868a10
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Add support to control EPS via a PCH gpio
Change-Id: I6f570fd43e1649fb23255b0890e01086e34f844a
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Add new helper function in the acpigen library, that use the underlying
soc routines.
Change-Id: I8d65699d3c806007a50adcb51c5d84567ce451b7
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Move print_me_fw_version(), remove print_me_version/dump_me_version from
cnl/skl/apl and make changes to call print_me_version() which is defined
in the CSE lib.
TEST=Verified on hatch, soraka and bobba.
Change-Id: I7567fac100b14dc207b7fc6060e7a064fb05caf6
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
This patch includes the change required to display Apollo Lake platform
information which reports CPU, MCH, PCH and IGD information in romstage.
BUG=None
TEST=
1. Boot to OS on Bobba board.
2. Verified below info from CPU Console log in romstage
CPU: Intel(R) Celeron(R) N4000 CPU @ 1.10GHz
CPU: ID 706a1, Geminilake B0, ucode: 00000031
CPU: AES supported, TXT NOT supported, VT supported
MCH: device id 31f0 (rev 03) is Geminilake
PCH: device id 3197 (rev 03) is Geminilake
IGD: device id 3185 (rev 03) is Geminilake EU12
Change-Id: Id4edfeae7faee9f5f80698cf34b31fdcb066a813
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38824
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Linux expects a working PSCI and hangs if not found.
Add BL31 into CBFS as '-M virt,secure=on -bios ' commands line arguments cause
qemu's internal PSCI emulation to shutdown.
BL31 is placed in qemu's SECURERAM memory region and won't conflict with
resources in DRAM.
Tested on qemu-system-aarch64:
Fixes a hang and allows to boot into Linux 5.4.14 userspace.
Change-Id: I809742522240185431621cc4fd8b9c7deaf2bb54
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Enable MMU in bootblock. Makes qemu look more similar to real hardware.
There's no real need to activate the MMU.
Tested on qemu-system-aarch64: 5 page entries are used out of 32.
Change-Id: Ifaed9d3cc11520f180a732d51adce634621b5844
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38534
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace DSDT ACPI code and DSDT injection with a SSDT only solution.
The current implementation shows some issues on current Linux, which
might be due to external ACPI objects, which are then injected into
DSDT or the fact that those objects only use 3 characters.
Replace all the DSDT code with an SSDT generator.
Tested on HP Z220:
Boots into Linux with no ACPI errors. The SSDT can be disassembled.
Change-Id: I41616d9bf320fd2b4d8495892b8190cd2a2d057f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This change is mainly to control PlatformDebugConsent FSP UPD.
PlatformDebugConsent is enabled if SOC_INTEL_<SOC>LAKE_DEBUG_CONSENT != 0.
PlatformDebugConsent in FspmUpd.h has the details.
TEST=Able to connect ITP/DCI with target system.
Change-Id: I39fe84025cb2bff186d61b2fcad531db52e2b440
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
As the SSDT generator for LDNs expects a "parent" PNP device
for proper ACPI code generation, validate that it is present.
Make sure the devicetree looks as expected and print a BUG message
if that's not the case.
Tested on HP Z220:
No BUG message was printed.
Change-Id: I6cbcba8ac86a2a837e23055fdd7e529f9b3277a2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Leverage the common sku id space helper encoders.
volteer uses the non-legacy SKU ID space.
BUG=b:149348474
BRANCH=none
TEST=only tested on hatch
Change-Id: Ic66908afb7abb34527b4177cfd07f03ad718317c
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Leverage in Puff to avoid diskswap variants. Later this could become
part of the baseboard definition and hatch diskswap variants migrated
over to use it as well.
BUG=b:149171631
BRANCH=none
TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and
run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration
on Puff.
Change-Id: Ie87f0823f28457db397d495d9f1629d85cfd5215
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The following plumbs through the enabling of Intel's TetonGlacierMode
allows for reconfiguring the PCIe lanes at runtime for hybrid drives
to be accessable via devicetree.
BUG=b:149171631
BRANCH=none
TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and
run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration
on Puff.
Change-Id: Id9a72161494db6a4da4abd3302b06df7c70634ab
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Leverage the common sku id space helper encoders.
BUG=b:149348474
BRANCH=none
TEST=tested on hatch
Change-Id: I96e10010fd375b127f1e10387d6f7a839bc35fdd
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39019
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The following introduces helpers that, by default,
accommodate a larger SKU id space. The following
is the rational for that:
Allow INT32_MAX SKU id encodings beyond UINT8_MAX.
This allows for the SKU id to accommodate up to 4 bytes
however we reserve the highest bit for SKU_UNKNOWN to be encoded.
However, the legacy UINT8_MAX encoding is supported by leveraging
the Kconfig by overriding it with the legacy max of 0xff.
Follow ups migrate boards to this common framework.
V.2: Fixup array size && drop sku_id SKU_UNKNOWN check and pass
whatever is set to userspace as firmware doesn't care about
the value.
V.3: Use SPDX-License header.
BUG=b:149348474
BRANCH=none
TEST=tested on hatch.
Change-Id: I805b25465a3b4ee3dc0cbda5feb9e9ea2493ff9e
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch overrides required FSP-S UPDs to enable 8254 timer
support for TGL if CONFIG_USE_LEGACY_8254_TIMER is selected.
TEST=Required to boot TianoCore payload.
Change-Id: Iaeff5c4b92691ed6ba7b71541ed4f947d5d299a8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Update memory parameters based on memory type supported by Tiger lake RVP
1. Update dq/dqs mappings
2. Update spd data for Tiger lake LPDDR4 SAMSUNG/MICRON memory
3. Add SPD data bin files for supported memory types
4. Update other FSPM UPDs as part of memory initialization
BUG=none
BRANCH=none
TEST= build tglrvp flash and boot to kernel
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I7248862efd1dcd5a0df0e17d39b44c168caa200e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Correct the offset for the Topstar driver enable/disable bit,
which was off by 2 bits compared to a dump of the AMI UEFI ACPI.
This prevents the fan mode (FANM) from being inadvertently changed
and hopefully fixes some intermittent issues with fan speed on
resume from suspend.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: Ibc3c39d5b14c753eed6d1ed8cbf161717f8d04e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39105
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The indirection of names is exceedingly confusing for ultimately the single
interrupt trace of EC_PCH_WAKE_ODL between the EC gpio#74 to GPD2/LAN_WAKE# on
the PCH side.
This helps folks chase this indirection down through the code.
BUG=b:147026979
BRANCH=none
TEST=builds
Change-Id: I35d746a202dae06d2f6f1edfaa3889864b09f50d
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
WWAN wake event is routed to GPP_D0 GPIO and Pen Detect wake event is
routed to GPP_C12 GPIO. Update the GPE configuration accordingly.
BUG=None
TEST=Build the mainboard.
Change-Id: Id36d2c8265a0b7ea241565f6bb723df6b37446fa
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch makes all legacy 8254 FSP UPDs (Enable8254ClockGating and
Enable8254ClockGatingOnS3) depend on CONFIG_USE_LEGACY_8254_TIMER to
avoid discrepancy between S0 and S3 resume flow.
TEST=Able to boot to TianoCore without any hangs and errors, also
verified S3 resume path doesn't clock gate 8254 timer using FSP-S UPD.
Change-Id: Id6fe74a51537abbb9ff48db925e37a64e5b21f78
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39110
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Overwrite the default of 1 MiB with the actual bios region size
set in the stock IFD.
Allows to use payloads like TianoCore without manually touching
the CBFS_SIZE.
Change-Id: Ic1753a38212cc4961671fea11afe88265e73333b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39073
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1. The ac timing of 2400Mbps should use diff params with 1600Mbps.
2. Fix the typo error of save shuffle function for DVFS.
BRANCH=kukui
BUG=none
TEST=emerge-kukui coreboot
Change-Id: I5edac32938def50836f386426e7deb652b80d42d
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Fix PNP warning about missing devicetree entry for SUART1/2 by setting
register 0xF0 to a sane (default) value.
Change-Id: Ie852696aae09b9b03cebd6c3d8cbbd53a7138d89
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The specified PNP registers PNP_MSC0-E (F0-FE) are part of the iLPC2AHB
bridge's index/value interface. They are no one-time config registers
so we can't specify a sane value in the devicetree.
Thus, drop them to stop coreboot from complaining about the missing
entries.
Change-Id: I7d7f16845c755592317f140cca66cca12032f7a6
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
When specifying _PAD_CFG_STRUCT with raw hex values, a logical reset
value of 0x0 is only defined for GPD pads. For any other GPIOs this maps
to 0x3.
On the Supermicro X11 boards a value of 0x0 is set for GPP_D22 and
GPP_F23, triggering the error "gpio_pad_reset_config_override: Logical
to Chipset mapping not found".
Set the right value (0x3<<30) for the affected GPIOs.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I3ae17dfc4d90f88f5b8bc5bee49740745778a91a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Fix an out-of-bounds read in the LZMA decoder which happens when the src
buffer is too small to contain the 13-byte LZMA header.
Change-Id: Id5893e60fc9a48deb83560b7917f5558cd30ef4e
Signed-off-by: Alex Rebert <alexandre.rebert@gmail.com>
Found-by: Mayhem
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch cleans soc/intel/{cnl, icl, tgl} by moving common
soc code into common/block/cse.
Supported SoC can select existing HECI_DISABLE_USING_SMM option to
select common cse code block to make heci function disable using
sideband interface during SMM mode at preboot envionment.
BUG=b:78109109
TEST=Able to make HECI disable in SMM mode successfully without any hang
or errors in CNL, ICL and TGL platform.
Change-Id: I22a4cc05d3967c7653d2abe2c829b4876516d179
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26133
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The datasheet uses "SWC" as shortcut for "System Wake-up Controller",
thus rename it in the code.
Change-Id: I8b3a14946e37f805d1c4e3df343dfcd7f67f6dc8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Add Thermal Design Current (TDC) defaults for CML:
1. TdcEnable
2. TdcPowerLimit
BUG=b:148912093
BRANCH=None
TEST=build coreboot and Intel FSP with fw_debug enabled, flash image to
the device, capture the log from the serial port during boot-up and
check TdcEnable and TdcPowerLimit for each domain in captured log
Signed-off-by: Marx Wang <marx.wang@intel.com>
Change-Id: Ie4b17e5b4ce41c1adb436ae5646f0d8578a440e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Default FSP values for "GtFreqMax" and "CdClock" UPDs are "Auto", hence
related FSP-S UPD override can be avoided from coreboot.
As per FSP-S UPD Header (FspsUpd.h)
/** Offset 0x020E - GT Frequency Limit
0xFF: Auto(Default)
**/
UINT8 GtFreqMax;
/** Offset 0x0209 - CdClock Frequency selection
0: (Default) Auto
**/
UINT8 CdClock;
TEST=Able to get Pre-OS display on ICLRVP and Dragonegg platform.
Change-Id: Ie500dd5fad5cd358ea3fad4d5c0be1b0c148584b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
This patch disables the SATA config from devicetree for JSL RVP, since we
are not planning to use the SATA storage in chrome config.
Change-Id: I9cbcbf96e70b79bfb60f228b77a1065c26cd1aa2
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Automatically select the linear framebuffer mode option if
available when Tianocore selected as payload, since VGA text
mode will not work properly with the default Tianocore payload.
Change-Id: Ic36fd035526f3efd00ffa12ad613fbac304b18cf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add missing include <device/pci_def.h> for the boards that are being
switched away from ROMCC_BOOTBLOCK.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I83ff712f99388c4e6ea00a942eb57bcabb53a3fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38903
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change creates gfx directory under drivers/ so that all drivers
handling gfx devices can be located in the same place. In follow-up
CLs, we will be adding another driver that handles gfx devices.
This change also updates the names used within the driver from
*generic_gfx* to *gfx_generic*. In addition to that, mainboard
drallion using this driver is updated to match the correct path and
Kconfig name.
TEST=Verified that drallion still builds.
Change-Id: I377743e0f6d770eed143c7b6041dab2a101e6252
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
As part of vboot1 deprecation, remove an unused vboot_struct.h
include. coreboot is now free of vboot1 data structure use.
One vboot_api.h include remains as part of security/vboot/ec_sync.c.
BUG=b:124141368
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I042d692aa252f8f859d4005455eb6a2eabc24a87
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Remove MAC address pass through because when MAC address pass through setting
change to "Use dock built-in MAC address", the MAC address always keeps the VPD
value.
BUG=b:149813043
TEST=tested on sarien and the result as below.
(Option) (Result)
- Use pre-assigned MAC address : Pass
- Use Chromebook built-in address : Pass
- Use dock built-in MAC address : Pass
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ia85ef6ed0c4db82301375edd0968cf7dd2f62dc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Follow latest HW schematics to set GPP_G4 and GPP_G6 to NC pin.
This can save 1mW power comsumption.
BUG=b:149289256
TEST=NA
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ib3bf8b8f922a350d2b73ef5c9e9cf1b6e2c0f657
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Commit 6ae8b50 [chromeec: Depend on events_copy_b to identify wake source]
partially broke resume from suspend on Auron and Slippy variants when
multiple events exist in the EC event queue. In the case of the device
suspending manually and then subsequently having the lid closed, the device
will be stuck in a resume/suspend/resume loop until the device is forcibly
powered down.
Mitigate this by clearing any pending EC events on S3 wakeup.
Test: build/boot several Auron/Slippy variants, test suspend/resume functional
with both single and multiple events in EC event queue.
Change-Id: I7ec9ec575d41c5b7522c4e13fc32b0b7c77d20d9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Remove MAC address pass through because when MAC address pass through setting
change to "Use dock built-in MAC address", the MAC address always keeps the VPD
value.
BUG=b:147994020
TEST=tested on drallion and the result as below.
(Option) (Result)
- Use pre-assigned MAC address : Pass
- Use Chromebook built-in address : Pass
- Use dock built-in MAC address : Pass
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I1f58e98187feb4e428ca75f7e82c464567528526
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
This patch makes all bit field macro definition for SMI_STS register
(offset 0x44) be consistent i.e. ending with "_STS_BIT".
Also modified relevant files where those macros are getting used.
Change-Id: Ibe3fbb459c106a3a58cd9a8b6eb3d7ee92e6ed82
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Originally, this patch made 'BIOS' uppercase in the referenced comment
and converted the C++ style to be consistent with the remainder of
the function. Somewhere, the 'BIOS' became uppercase creating a merge
conflict.
Now this CL converts the C++ style to be consistent with the remainder
of the comments.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: I85d78b5e08a7643c3d87e3daf353d6b3ba8d306b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38854
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The STM is a part of the core VTx and using ENABLE_VMX will make the
STM option available for any configuration that has an Intel
processor that supports VTx.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: I57ff82754e6c692c8722d41f812e35940346888a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38852
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Check to ensure that dual monitor mode is supported on the
current processor. Dual monitor mode is normally supported on
any Intel x86 processor that has VTx support. The STM is
a hypervisor that executes in SMM dual monitor mode. This
check should fail only in the rare case were dual monitor mode
is disabled. If the check fails, then the STM will not
be initialized by coreboot.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: I518bb2aa1bdec94b5b6d5e991d7575257f3dc6e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Previously the PRTs were defined in southbridge code (8014714
southbridge/intel/bd82x6x/acpi: Fix IRQ warnings), but this was lost
when southbridge PRTs became autogenerated. Add the proper PRTs for the
PCI express for graphics root ports.
This (again) fixes warnings issued by Linux for interrupts on secondary
functions of devices on the PEG ports, such as the HDMI audio controller
on graphics cards.
pcieport 0000:00:01.0: can't derive routing for PCI INT B
snd_hda_intel 0000:01:00.1: PCI INT B: no GSI
Tested with GIGABYTE P67A-UD3R (CB:31363) with Radeon HD 5670.
Change-Id: Ic429ec2fdeadb9dab1c03916974e173004d6cd16
Signed-off-by: James Ye <jye836@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The comment is no longer relevant. Perhaps the intention had been
to modify the names of the files delivered from AMD in order to
simplify Makefile.inc.
AMD firmware is distributed via the new amd_blobs repo and the
filenames match the blobs as they are released. Multiple Family 15h
devices are supported by this directory and their SMU Firmwares do
not all follow identical naming convention.
Keep the existing functionality and reword the comment.
BUG=b:120118850
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ifbf8e2286f34bc37a6178c37f8c412ec51ee02c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tigerlake irq.h and pci_irqs.asl have differences compared to
Jasperlake. Hence renaming irq.h as irq_tgl.h and pci_irqs.asl as
pci_irqs_tgl.asl
Also adding a new file irq_jsl.h and pci_irqs_jsl.asl for Jasperlake
SoC and allowing irq.h and pci_irqs.asl to choose the correct file based
on SoC selected.
BUG=None
BRANCH=None
TEST=Compilation for Jasperlake board is working
Change-Id: Ia8e88f92929fe40d7be1c28947e005cb0d862fcb
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
PCH_DEV_P2SB already covers both __SIMPLE_DEVICE__ cases. The values are
only used for PCI-config access functions, which also check for NULL
when necessary.
The PCI_DEV_INVALID case can't occur by definition, and if we wanted to
check, we could do so at compile time using _Static_assert().
Change-Id: I400fc20133809aaa0fd0519531a62ec9b8812ef1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
The NEED_VB20_INTERNALS switch is being deprecated.
Use the header file vb2_internals_please_do_not_use.h instead.
BUG=b:124141368, chromium:957880
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ie35644876178b806fab4f0ce8089a556227312db
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:2055600
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Use vb2api_get_recovery_reason() API function rather
than accessing vb2_shared_data internals.
Of all the vanilla verified boot code in coreboot,
this is the last remaining use of vboot's internal
data structures in coreboot. There remains only one
sole instance in Eltan's code.
BUG=b:124141368, chromium:957880
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I845c9b14ffa830bc7de28e9a38188f7066871803
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:2055662
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
FSP-T takes microcode pointer and location parameters, and FSP-T is
invoked before CAR is set-up and before memory is trained. So it is not
possible to modify supplied microcode pointer in runtime. Because of
that we have to hardcode the pointer in bootblock.
Also, current FSP-T on Xeons require microcode (it is not optional).
Reasons for that are currently unclear and are being investigated.
However for the present time we need to be able to add microcode at a
certain offset so FSP-T can be used.
TEST=test on OCP TiogaPass board, as well as out-of-tree CPU/board
Change-Id: I6c02601a7ac64078e556e2032baeccaf27f77da2
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The serial number and UUID returned by DMI are retrieved from VPD.
The solution supports a 16 character "serial_number" and a 36 character
"UUID" string.
BUG=N/A
TEST=tested on monolith
Change-Id: I0b6ce769cfa81a1e248a35f6149b7d1bbcf1f836
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Enable use of VPD for monolith. This will be used to store the UUID and
Serial number.
BUG=N/A
TEST=build
Change-Id: I32b60fef44929c51427a124cbb81e5246db2546c
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Below helper function is added:
cse_wait_com_soft_temp_disable() - It polls for CSE's operation mode
'Soft Temporary Disable'. CSE enters this mode when it boots from
RO(BP1) partition. The function must be called after resetting CSE to
wait for CSE to enter 'Soft Temporary Disable' Mode.
BUG=b:145809764
Change-Id: Ibdcf01f31b0310932b8e834ae83144f8a67f1fef
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Send HMRFPO_GET_STATUS command when CSE's current working state is Normal.
TEST=Verified on hatch.
Change-Id: I4380e5096c6346d88aae6826d19a2f4ed1e97036
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
In this patch, name.c file that includes the function definition for
fill_processor_name which is used by the report_cpu_info function is been
made available in romstage.
This is done to facilitate the report_platform_info to be called from
romstage, as the intention is to move the report_platform_info to romstage
for all SOC's due to the bootblock size constraint.
BUG=None
TEST=Build and boot APL, GLK and CNL platforms.
Change-Id: Ifd6d4b80c2e07d02adaed676a56efeb6fb704552
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Upcoming patches for the Linux kernel (5.6 ?) would like to consume
information about the USB PD ports that are attached to the device. This
information is obtained from the CrOS EC and exposed in the SSDT ACPI
table.
Also, the device enable for this PCI device is moved from ec_lpc.c to
a new file, ec_chip.c, where EC-related ACPI methods can live. It
still allows other code to call functions on device enable (so that
PnP enable for the LPC device still gets called).
BUG=b:146506369
BRANCH=none
TEST=Verify the SSDT contains the expected information
Change-Id: I729caecd64d9320fb02c0404c8315122f010970b
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Since CB:37231 [1], the vboot working data has been replaced with vboot work
buffer, so corrrect the help text of option VBOOT_STARTS_IN_ROMSTAGE
accordingly.
[1] security/vboot: Remove struct vboot_working_data
BRANCH=none
BUG=chromium:1021452
TEST=none
Change-Id: I80783274179ae7582bbb4c8f9d392895623badce
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Change-Id: I70187d09ecdaa8149299cdd8f6f8fc9517b05e15
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Jonathan Zhang