Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h
includes with the common gpio.h which will include soc/gpio.h
which will include intelblocks/gpio.h which will include
soc/gpio_defs.h
BUG=b:261778357
TEST=Able to build and boot Google/rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I58e428cde5e13f4f0dfe528d798c0613b7f8a94a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71630
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
When the watchdog timer reaches 0, the timer value won't reset to the
default value unless there is an external reset or a kick. It will
result in the watchdog failing to trigger the reset signal.
We kick the watchdog to reset the timer to the default value. Also,
because WDT hardware needs about 94us to synchronize the registers,
add a 100us delay before triggering the reset signal.
BUG=b:264003005, b:264017048
BRANCH=corsola
TEST= Reboot successfully with the following cmd
stop daisydog
sleep 60 > /dev/watchdog&
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Signed-off-by: Kuan-Hsun Cheng <allen-kh.cheng@mediatek.com>
Change-Id: Ic4964103d54910c4a1e675b59c362e93c2213b19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71754
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When AP boots up after Cr50 firmware update and reboot, AP finds
that Cr50 reset is required for Cr50 to pick the new firmware so
it trigger Cr50 reset and power off the system, AP expects system
will power on automatically after Cr50 reset. However this is not
the case for Chromebox, Chromebox EC set AP_IDLE flag when system
is shutting down, when AP_IDLE flag is set in EC, the system stays
at S5/G3 and wait for power button presssend. It cause an issue in
factory that the operator needs to press power button to power on
the DUT after Cr50 firmware update.
This patch sends EC command to direct EC to clear AP_IDLE flag
after AP shutdown so AP can boot up when Cr50 reset.
BUG=b:261119366
BRANCH=firmware-brya-14505.B
TEST=DUT boots up after Cr50 firmware update in factory test flow
Change-Id: If97ffbe65f4783f17f4747a87b0bf89a2b021a3b
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70773
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update and also adjust configs so that they work with NixOS 22.11.
Change-Id: Ia0fed68f5449ccf56b25660f5cdbc8c239064748
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
This patch introduces a new config named `DEFAULT_ADL_NEM` and
allows respective brya variants with Alder Lake ESx samples to
choose NEM over eNEM as eNEM was fuse disabled till ESx.
TEST=The boot flow related to eNEM and NEM behaviour remains the
same with and without this patch.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibbd492a3d210739120c7ad16415cb7912f5b70ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Due to mainboard restrictions a SATA link at Gen 3 (6 Gbps) can cause
issues as the margin is not big enough. Limit SATA speed to Gen 2 to
achieve a more robust SATA connection.
Change-Id: Ia79998db5f959528a4e8e29e570a7f55283adee1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71230
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
In cases where there are limitations on the mainboard it can be
necessary to limit the used SATA speed even though both, the SATA
controller and disk drive support a higher speed rate. The FSP parameter
'SataSpeedLimit' allows to set the speed limit.
This patch provides a chip config so that this FSP parameter can be
set as needed in the devicetree on mainboard level.
Change-Id: I610263b34b0947378d2025211ece4a9ec8fbfef6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71229
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
BUG=b:121309055
TEST=build/boot Windows/linux on multiple dedede variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I91e03bd1d96a6b2f0c3813665910133db0d6c308
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I212533ffdfb05f841e722c130b52c2976272e670
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
For touchscreens on dedede variants, drive the enable GPIO high
starting in romstage, then disable the reset GPIO in ramstage. This will
allow coreboot to detect the presence of i2c touchscreens during ACPI
SSDT generation (implemented in a subsequent commit).
Since the fast majority of dedede variants have a touchscreen option,
and those that do use the same GPIOs for enable/reset, set the GPIOs for
touchscreen operation in the baseboard and then override for the few (3)
variants that do not have a touchscreen.
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: Ib95e23545cc3e8589ddbd9e18cd0533bec9333e0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: Ic216827a4b53d1d35913efca63a43d4672791c54
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Replace spaces with tabs for consistency.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I65b9bec7443094dfd2f6b0d6b11e0100023873b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This now also tests a lot of debug code on 64bit.
Change-Id: Iea3d5b8926fd8300c9daba0bc6dac91b9e55cdd6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This avoids the warning of casting pointers to integers of different
size.
Change-Id: I7bcb6dbf286438115c854d618eaa2da21c81400d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69389
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
The dGPU used for some Brya projects requests 33 bits of address
space for one of its BARs via the Resizable BAR mechanism
(requires 6GB).
This Kconfig is currently set at 32 bits for brya, so the allocation currently is capped at 32 bits (4GB). This patch sets the limit to 33
bits for brya boards, which is enough for the GPU.
BUG=b:214443809
TEST=all of the dGPU PCI BARs on agah can be successfully allocated
Change-Id: Ia791be5108fb07a256ae62fc2aee2f057909ef12
Signed-off-by: Tarun Tuli <tarun@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Add the following people as maintainers for the cross toolchain.
* Martin Roth
* Felix Singer
* Elyes Haouas
Change-Id: I3fad10baa0f0177693e009a4bbc218c6064611b9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
get_cpu_index() helper function returns cpu's index based on it's APIC
id position from the ascending order list of cpus' APIC IDs.
In order to calculate the cpu's index, the helper function needs to
traverse through each cpu node to find their APIC IDs. So, the function
traverse the CPU node list from the cpu whose APIC ID is 0 assuming it
is the first cpu node in the list. This logic works fine where BSP's
APIC ID is 0. But, starting from MTL, APIC ID for BSP need not be 0 as
APIC ID numbering first get assigned for CPU Die Efficient cores, then
Performance cores.
Please refer section# 6.1 of doc#643504 for more details on APIC IDs.
Considering the APIC Id allotment for MTL cores, as existing code
traversing begins from the cpu that has APIC Id#0 which may not be the
first cpu node in the list so index calculation results in wrong value.
The patch addresses above described issue by traversing all the CPU
nodes to calculate the cpu index. Also, prevents inconsistent report
of /sys/devices/system/cpu/cpu*/cpufreq/* and
/sys/devices/system/cpu/cpuXX/acpi_cppc on each reboot.
TEST=Verified that the get_cpu_index helper function returns the correct
index id for a CPU on Rex.
The coreboot log with code instrumentation, before this patch:
[DEBUG] my_apic_id:0x10 cpu_index: 0x6
[DEBUG] my_apic_id:0x11 cpu_index: 0x6
[DEBUG] my_apic_id:0x42 cpu_index: 0x6
[DEBUG] my_apic_id:0x21 cpu_index: 0x6
[DEBUG] my_apic_id:0x40 cpu_index: 0x6
[DEBUG] my_apic_id:0x31 cpu_index: 0x6
[DEBUG] my_apic_id:0x39 cpu_index: 0x6
[DEBUG] my_apic_id:0xa cpu_index: 0x3
[DEBUG] my_apic_id:0x0 cpu_index: 0x0
[DEBUG] my_apic_id:0x8 cpu_index: 0x2
[DEBUG] my_apic_id:0x4 cpu_index: 0x2
[DEBUG] my_apic_id:0x28 cpu_index: 0x6
[DEBUG] my_apic_id:0x2 cpu_index: 0x1
[DEBUG] my_apic_id:0x38 cpu_index: 0x6
[DEBUG] my_apic_id:0x29 cpu_index: 0x6
[DEBUG] my_apic_id:0xe cpu_index: 0x5
[DEBUG] my_apic_id:0x6 cpu_index: 0x2
[DEBUG] my_apic_id:0x20 cpu_index: 0x6
[DEBUG] my_apic_id:0x30 cpu_index: 0x6
[DEBUG] my_apic_id:0x19 cpu_index: 0x6
[DEBUG] my_apic_id:0xc cpu_index: 0x4
[DEBUG] my_apic_id:0x18 cpu_index: 0x6
We can see same cpu_index for multiple cores before fix.
After this patch..
[DEBUG] my_apic_id:0x10 cpu_index: 0x8
[DEBUG] my_apic_id:019 cpu_index: 0xb
[DEBUG] my_apic_id:0x11 cpu_index: 0x9
[DEBUG] my_apic_id:0x18 cpu_index: 0xa
[DEBUG] my_apic_id:0x40 cpu_index: 0x14
[DEBUG] my_apic_id:0x30 cpu_index: 0x10
[DEBUG] my_apic_id:0x42 cpu_index: 0x15
[DEBUG] my_apic_id:0xc cpu_index: 0x6
[DEBUG] my_apic_id:0x2 cpu_index: 0x1
[DEBUG] my_apic_id:0x29 cpu_index: 0xf
[DEBUG] my_apic_id:0xe cpu_index: 0x7
[DEBUG] my_apic_id:0x20 cpu_index: 0xc
[DEBUG] my_apic_id:0x0 cpu_index: 0x0
[DEBUG] my_apic_id:0x31 cpu_index: 0x11
[DEBUG] my_apic_id:0x28 cpu_index: 0xe
[DEBUG] my_apic_id:0x21 cpu_index: 0xd
[DEBUG] my_apic_id:0xa cpu_index: 0x5
[DEBUG] my_apic_id:0x38 cpu_index: 0x12
[DEBUG] my_apic_id:0x8 cpu_index: 0x4
[DEBUG] my_apic_id:0x4 cpu_index: 0x2
[DEBUG] my_apic_id:0x39 cpu_index: 0x13
Change-Id: I69e5e6231dd18b43d439340aaed50eb9edeca3b7
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70751
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch makes the call into TXT lib in order to disable the TXT
if SoC user haven't selected the `INTEL_TXT` config. Disabling TXT
would be helpful to access VGA framebuffer prior calling into FSP-M.
TEST=Able to perform disable_txt and unlock memory which helped to
access VGA framebuffer prior calling into FSP-M.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9dd7c5492a5f45eef0dd9e836cc2da1844c78919
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71575
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add a function to disable TXT as per TXT BIOS spec Section 6.2.5. AP
firmware can disable TXT if TXT fails or TPM is already enabled.
On platforms with TXT disabled, the memory can be unlocked using
MSR 0x2e6.
TEST=Able to perform disable_txt on SoC SKUs with TXT enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I27f613428e82a1dd924172eab853d2ce9c32b473
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add the list of boards removed after the 4.18 release and update
other text.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id90a84eb9a417836a7d3fdd9b6f2f3ae34c95fc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This removal was announced in 4.16, but didn't make it into the 4.17 or
4.18 release notes.
Those platforms have now been removed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I35607a86242c37e1578874b3a79ff0387a55b146
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Enable DPTC support for markarth.
BUG=b:263216451
TEST=emerge-skyrim coreboot
Change-Id: I18c2c840037f65f4f2ca92054247cece28843e45
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71720
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Follow thermal table from thermal team.
1. Enable TS3 thermal sensor.
2. Set TS3 passive policy to 63.
3. Set TS3 critical policy to 73.
4. Modify TSR2 passive policy to CPU.
BUG=b:263554342
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ia1fcaee15a8b58b755ce0a48a1978e795b66efd7
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71658
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add ACPI DmaProperty for gladios.
BUG=b:239513596
TEST=Verified SSDT on gladios unit.
Before:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
}
}
After:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
}
}
Change-Id: I1c4f6ff7b3eda114f4f365a963c089fe584d8aee
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71699
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
PRMRR is used by many Intel SOC features, not just Intel SGX.
As of now SGX and Key Locker are the features that need PRMRR.
Untie it from Intel SGX specific files and move to common cpulib.
Also rename PRMRR size config option. Use the renamed PRMRR size
config option to set the PRMRR size.
TEST=Able to set PRMRR size using config.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I0cd49a87be0293530705802fd9b830201a5863c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70819
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
This patch decouples useful TXT related operations from the romstage.c
file alone and moves them into a helper txtlib.c. This effort will be
helpful for SoC users to perform TXT related operations
(like Disabling TXT) even without selecting INTEL_TXT config.
At present, those helper functions are only available upon selecting
INTEL_TXT which is not getting enabled for most of the SoC platform in
the scope of the Chromebooks.
TEST=Able to access functions from txtlib.c even without selecting
INTEL_TXT config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iff5b4e705e18cbaf181b4c71bfed368c3ed047ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Sometimes, server platforms may have more than one socket on server
board. However, there's no field to store information about which
socket the DIMM comes from in dimm_info structure.
This patch adds soc_num field in dimm_info structure to store socket
ID of the DIMM.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I1b9e2b87fda2d7c32ecb8ce9d989795c8b869cea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Also disable TCO timer through calling tco_configure().
If tco_configure() is not called, the TCO timeout would
trigger SMI periodically about every 2 seconds with SMM log:
"TCO_STS: BIT18 TIMEOUT"
Tested=On AC CRB, does not see periodic SMI log.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I2d307ad16109ae11862dd5e5acc0f12f47b22582
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
If cbmem_top is not 1M aligned there will be a hole between DPR base
and cbmem_top that the allocator will consider as unassigned memory.
Resources could incorrectly be assigned to that region and the final
MTRR solution will also try to skip that hole, therefore using a lot
more variable MTRRs than needed.
TESTED on Archer City 2S system: Uses 1 variable MTRR in the final
setup instead of 7.
Change-Id: I198f8d83bcfcdca3a770bd7f9a7060d5782a49fe
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Software Connection Manager doesn't work with Linux 5.13 or later,
resulting in TBT ports timing out. Not advertising this results
in Firmware Connection Manager being used and TBT works
correctly.
Add Kconfig options to chose between SCM (Software Connection
Manager) and FCM (Firmware Connection Manager). FCM is primary, as
it's more compatible save for ChromeOS devices as ChromeOS uses
SCM.
Linux patch:
torvalds/linux@c6da62a
c6da62a219d028de10f2e22e93a34c7ee2b88d03
Tested with StarBook Mk VI (i7-1260P).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iac31d37c0873f41f7b14e1051fe214466d1ebdd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This patch adds the support to enable/disable package c-state demotion
feature from the devicetree based on mainboard requirement.
Port of commit 4be8d9e80d ("soc/intel/adl: Add support to configure
package c-state demotion")
BUG=none
TEST=Boot to the OS on Google/Rex.
Snippet from FSP log:
[SPEW ] PkgCState Demotion : 0x1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0a4b0b181349ce41035524482add4336cf83a68b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch configures max Pkg C-state to Auto which limits the max
C-state to deep C-state.
Port of commit af42906efa ("soc/intel/alderlake: Set max Pkg C-states
to Auto")
BUG=none
TEST=Boot to the OS on Google/Rex.
Snippet from FSP log:
[SPEW ] PkgCStateLimit : 0xFF
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic403ab83a594b04920d5cf600432939687a2598b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Because skyrim is loading ramstage from SPI with the DMA engine, the
size of the compressed image is less important to load speed than
decompression time.
Because the LZ4 decompression is so much faster than LZMA, compressing
with LZ4 saves us roughly 30ms in boot time.
For size, we're spending roughly 57KiB:
fallback/ramstage 0x9b00 stage 130864 LZMA (305316 decompressed)
fallback/ramstage 0x9b00 stage 189126 LZ4 (305316 decompressed)
Right now we have 2MiB empty space in Skyrim's RO before this change,
and roughly 550KiB empty space in RW, so there aren't currently any
size worries.
Just for fun, I also tested uncompressed ramstage, and it was still
18ms faster than LZMA, but that makes it roughly 12ms slower than LZ4.
BUG=b:264409477
TEST=Boot skyrim, look at boot speed.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Iedde6fc2db9d702c0ff2b0081e7baa254ac6699f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Previously, LZMA was included in romstage because it was almost always
needed to decompress ramstage. When compressing ramstage with LZ4, but
using LZMA compression for FSP-M, we still need the LZMA decompression
to be present, so update when the Makefile includes the LZMA decoder.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Id52d25a13420f05db8b2b563de0448f9d44638e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
When ramstage is loaded asynchronously, as on the skyrim boards, the
faster decompression of LZ4 allows for faster boot times than the
tighter compression of LZMA.
To make this change, the name of the existing ramstage_compression
option needs to be updated.
BUG=b:264409477
TEST=Boot skyrim, look at boot speed
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I27dd1a8def024e0efd466cef9ffd9ca71717486a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71673
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the dibbi variant of the waddledee reference board by
copying the template files to a new directory.
BUG=b:260934018
BRANCH=dedede
TEST=util/abuild/abuild -p none -t google/dedede -x -a includes
GOOGLE_DIBBI
Change-Id: I3b8d4e7f8a53323f56567cbbc03bab7f8804f286
Signed-off-by: Liam Flaherty <liamflaherty@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71709
Reviewed-by: Adam Mills <adamjmills@google.com>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new ram_id:0000 for Micron MT62F1G32D2DS-026 WT:B.
Add new ram_id:0010 for Micron MT62F512M32D2DR-031 WT:B
The RAM ID table has been assigned as:
DRAM Part Name ID to assign
K3KL8L80CM-MGCT 0 (0000)
H58G56BK7BX068 0 (0000)
MT62F1G32D2DS-026 WT:B 0 (0000)
K3KL9L90CM-MGCT 1 (0001)
H58G66BK7BX067 1 (0001)
MT62F2G32D4DS-026 WT:B 1 (0001)
MT62F512M32D2DR-031 WT:B 2 (0010)
BUG=b:263296326, b:263216451
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Change-Id: I3a0d3edb813ef91bfdc68f7400be64fb679dfc04
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Enable eNEM for all nissa variants. This is mostly done to be consistent
with other recent Intel platforms. It's not strictly necessary since on
nissa the LLC size is larger than the total code + data size used in
CAR. There is no change in boot time.
BUG=None
TEST=Boot to OS on craask
Change-Id: Iad48976e405403ab61c71d8f72e0616ea8b85ebd
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This bit is dropped in factory. All skus can use table ID_0.
BUG=b:251287101
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I4298376899f881dd2265aef5a0bbc5bcc46728a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71690
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Dinesh Gehlot