framebuffer address is dynamically chosen by libpayload now, so there's
no need to configure it in coreboot.
CQ-DEPEND=CL:401402
BUG=chrome-os-partner:58675
BRANCH=none
TEST=Boot from kevin, dev screen is visible
Change-Id: I9f1e581d5c63b3579b26be22ce5c8d1e71679f6f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b3b6675420592c30e1e0abc8f8e9dd6ed5abd04c
Original-Change-Id: I7e3162f24a4dc426fe4e10d74865cf0042c80db5
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/401401
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17109
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Near the end of DDR initialization, the system switches to the index1
configuration. Sometimes this failed and a status bit that coreboot was
waiting for was never set, hanging the system.
Instead, give the system 100ms to reach the new configuration or reboot
it, which generally fixes the issue. Also reset when training the index1
configuration fails.
BUG=chrome-os-partner:57988
BRANCH=None
TEST=The error condition now leads to a reboot of coreboot which
recovers the system, instead of hanging.
Change-Id: Icb4270369102ff7a4ce91b0677e04b4eb10f1204
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ca250d0628ea3b6b39d5131246eaba68637c5140
Original-Change-Id: Id6e8936d90e54b733ac327f8476d744b45639232
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/399681
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17106
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
1. Update write leveling value to 0x200.
When the wrdqs slave delay is changed to 0x200, the phase between the
dqs and the clock is 0 degrees. The pcb layout can make sure the tDQSS
timing is smaller than 0.25tck, so this value is useful for both higher
and lower frequencies.
2. Disable read leveling for LPDDR3.
The read leveling result is unreliable - the value is not in the middle
of the read eye. To fix this, disable read leveling and fix the read
DQSn slave delay setting for DQn to 0x080 (1/4 cycle delay of the
input signal).
BUG=None
BRANCH=None
TEST=Boot from kevin; Check by shmoo read eye and stability test, that
the updated value of 0x80 is better.
Change-Id: Ia72b601d9bf4e34ba1b0b4584b2c5c3ce9dafbd4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37e8dfe783db3ce71aa026b4609ed0bfa16db06f
Original-Change-Id: I2a5d40c0348449b2a7c609c1db65da4ed5f1c09f
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Jeff Chen <cym@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/396598
Original-Commit-Ready: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://review.coreboot.org/17105
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
To enable DDR Dynamic Voltage and Frequency Scaling (DVFS) we need to
train alternative configurations first, so do the training and store the
values.
BUG=None
BRANCH=None
TEST=Boot from kevin
Change-Id: I944a4b297a4ed6966893aa09553da88171307a42
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94533ff3ba21bcb0ace00bedcf0cebb89a341be2
Original-Change-Id: I4a98bc0db5553d154fedb657e35b926a92aa80c7
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/386596
Original-Commit-Ready: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17104
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Testing for "devfn < 0" on an unsigned doesn't work, and i2c_bus_to_devfn
returns an int (with -1 for "error"), so use int for devfn.
Adapt Change-Id I7d1cdb6af4140f7dc322141c0c018d8418627434 to fix more
instances.
Change-Id: I001a9b484a68e018798a65c0fae11f8df7d9f564
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1357450, #1357449
Reviewed-on: https://review.coreboot.org/17054
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Some of our RK3399 devices have panel resolutions as high as 2400x1600.
With 16bpp that barely still fit into an 8MB framebuffer, but then we
changed it to 32bpp for better image quality...
Note that this is a band-aid. Coreboot-allocated framebuffers shouldn't
be used at all on ARM64 devices, since libpayload is perfectly capable
to dynamically allocate it with the right size based on EDID-information
on this architecture. That will require some more elaborate work to be
fixed with later patches.
BRANCH=gru
BUG=chrome-os-partner:58044
TEST=Warm-reboot Kevin on the dev screen, confirm that you don't see the
lower half of the screen that overflowed our allocated framebuffer
preserved from the last boot as soon as the backlight turns on.
Change-Id: I00a63cfef35a8ee734543abbdb298344fb529283
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d2718efcacb50371624d9f6a3b586c298e8c2fec
Original-Change-Id: Ia1fa28971c65d7d0639966e715f742309245172b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/399966
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/17108
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add the eve board files using kabylake and FSP 2.0.
BUG=chrome-os-partner:58666
TEST=build and boot on eve board
Change-Id: I7ca71fe052608d710ee65d078df7af7b55d382bc
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17177
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Dumping and behavioral analysis have shown that there are more registers
in the environment control of the IT8783E/F than documented in my data-
sheet. This adds every register that wasn't 0x00/0xff by default. The
default values are guesswork: those that looked like sensor readings
became NANA, others are taken from dumps.
Change-Id: I7e39700c9b98ed5be9f085bc8ffd848006310254
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17005
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Values are taken from an unpublished datasheet. With the exception of
the default value for register 0x55 in the environment controller space:
Looks like this was just documented wrong. The dumped value of 0x50 also
makes more sense.
Change-Id: I2bd23d30b7158b2e05fcee7c6280df82570d1401
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add new dump format to superiotool that prints each register on a
separate line. This should be more suitable for diff'ing dumps of
multiple superiotool runs.
Change-Id: I226ee82b903bf77e760d3396d02fa50688adb9f2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17003
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
All current implementations of ramstage_cache_invalid() were just
resetting the system based on the RESET_ON_INVALID_RAMSTAGE_CACHE
Kconfig option. Move that behavior to a single implementation
within prog_loaders.c which removes duplication.
Change-Id: I67aae73f9e1305732f90d947fe57c5aaf66ada9e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17184
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Ron reported some toolchain emitting .sdata sections. Let's ensure
we catch objects in those sections instead of getting dropped on the
floor for architectures which emit those sections.
Change-Id: I0680228f8424f99611914ef5fc31adf5d3891eee
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17180
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
`libhwbase` is a SPARK library that contains some basic support for i/o
access, debugging, timers. Just what I put around `libgfxinit`, to make
it build standalone.
Change-Id: I1918680c14696215522e1c5dae072235bb4e71a3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16948
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Ada usually does lots of type and contract checking during runtime. As
this produces overhead and there is nobody to tell when we run into an
exception, we disable code generation for those checks. Now disable it
for `Refined_Post` too, which was just missed earlier.
Change-Id: I67ca754f830e387efee3930e86929eb494bfaf03
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16945
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Ada knows a pragma `Debug` that is used to exclude procedure calls from
a release build. The new option `DEBUG_ADA_CODE` enables those procedure
calls.
Change-Id: Id5298e5819606c3d1cf2a2a1cd4f1d5d1227aa4f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16943
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
These settings should be always made by the firmware, no matter if we
set up graphics or not. It looks like Linux doesn't even know these
registers.
The values are taken from the PRMs for Sandy Bridge and Ivy Bridge [1,
2]. They match the settings that were done in the native graphics path
for Ivy Bridge. I expect the differences to be an update (i.e. the set-
tings we did on the Sandy Bridge path were just outdated). Also, these
settings affect the PCH and not the CPU which are independent from each
other.
[1] Intel® OpenSource HD Graphics Programmer’s Reference Manual (PRM)
Volume 3 Part 3: PCH Display Registers (SandyBridge)
Doc Ref #: IHD-OS-V3 Pt3 – 05 11
https://01.org/sites/default/files/documentation/snb_ihd_os_vol3_part3.pdf
[2] Intel ® OpenSource HD Graphics Programmer’s Reference Manual (PRM)
Volume 3 Part 4: South Display Engine Registers (Ivy Bridge)
Doc Ref #: IHD-OS-V3 Pt 4 – 05 12
https://01.org/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf
Change-Id: I83cc90c7558b93273a727f332fb0d8ced47ed70e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17073
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
ramstage_cache_invalid which was added in
I83fe76957c061f20e9afb308e55923806fda4f93 (review.coreboot.org/#/c/17112)
requires hard_reset to be defined in postcar stage.
BUG=None
BRANCH=None
TEST=Compiles successfully for reef.
Change-Id: I283277c373259e0e2dfe72e3c889ceea012544f2
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17182
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This document provides information about the different functions that a
driver can use for generating ACPI code for toggling GPIO. These
functions are expected to be implemented by the SoC. It also defines the
different constraints on use of Local variables in ACPI code while
implementing these functions.
BUG=chrome-os-partner:55988
Change-Id: Ibc03d766afb6d7b75bc0dc9f79920b561f1c4a78
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17128
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This was tested at the coreboot meeting in Berlin.
The uart programming may still not be right but when used with
the lowrisc bitstream for the board we were able to load
and start linux, although it does not yet get far due to
PTE version issues with lowrisc.
Change-Id: Ia1de1a92762631c9d7bb3d41b04f95296144caa3
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/17132
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This patch updates the _ART table with other external sensor
TSR0 for Fan speed control on Skylake-U based Kunimitsu and
Lars boards.
Also, updates the temperature values in DPTF policy for
better performance.
BUG=chrome-os-partner:51025
BRANCH=firmware-glados-7820.B
TEST=Built and booted on kunimitsu and lars EVT boards.
Verified this updated _ART table on these boards with
different workloads.
Change-Id: Ib195910c5eb00e004e8b9bd50e266ade3c175be2
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/332349
Reviewed-on: https://review.coreboot.org/17066
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Some distribution compilers enable Position Independent Executable (PIE)
by default, causing a build failure.
So explicitly disable PIE by passing the flag `-fno-pie`, to fix the
build error.
Change-Id: I1b7d7168e34c5c93c25bc03ffa49b2eeac0e76f8
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/17097
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In certain cases a board variant may need to override the NHLT
OEM strings in the main NHLT table. Therefore, provide that path.
BUG=chrome-os-partner:56918
Change-Id: I57cc4fd3665698e41ceebb1949180f86bb60b61f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17167
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Going forward GPIO_17 is used to determine the configuration of
the board w.r.t. the number of DMICs on the board.
BUG=chrome-os-partner:56918
Change-Id: I03edb880e0649977030c1b87219ebebac631a519
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17163
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
While using '3' is fine for the standard gpe0 for skylake, I want
to make sure anyone that copies this code doesn't tweak GPE0_REG_MAX
without the hard coded index. If that does happen now things will
still work, but it may just not match the hardware proper.
BUG=chrome-os-partner:58666
Change-Id: I434b9a765a0a2f263490bb2b4ecb3635292d46c9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17160
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add a GPIO macro that allows a pin to be routed to the APIC with
the input inverted. This allows a normal interrupt to get used as
a GPE during firmware and still be used as a perhiperal interrupt
in the kernel.
BUG=chrome-os-partner:58666
TEST=boot en eve and use TPM IRQ in firmware and OS
Change-Id: I77f727f749fdd5281ff595a9237fe1e634daba96
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17176
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In RS485 mode RTS line acts as a transceiver direction control.
The datasheet is not very clear about the polarity but register setting
here is tested to drive nRTS line high when transmitting.
Also note revision of B of the super-IO has errata and 8N1 setting does
not work properly, you would need revision C of the chip assembled to
fix this.
Change-Id: I705fe0c5a5f8369b0a9358a64c74500238b5c4ba
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14998
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The checkpatch script takes a really long time to run, and when the
output is buffered to wait until it's finished, it's hard to tell if
the script is actually doing anything.
Instead, use tee to log the output and display it at the same time.
Change-Id: I3cf36e5e6ca28584103888ee1c6f125320ac068a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17125
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
On QEMU using SeaVGABIOS breaks some bootloaders, e.g. ISOLINUX does not
work and GRUB works but is forced in txtmode, instead of graphical mode.
Change-Id: If31d4e5ed19cbeed3f8f9dbc23cc738dd55986e5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17122
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In anticipation of getting fixed material remove the disabling of
periodic training for MT53B512M32D2NP and MT53B256M32D1NP.
BUG=chrome-os-partner:59003
Change-Id: Iaadaa979d85cab78dda527db7480420af02fd832
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17130
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Explain the reasoning for the part_num strings used in the
memory SKU table explaining the necessity of keeping mosys
in sync with the strings used. It's possible that actual part
numbers could change as the higher speed material gets cheaper,
for example.
BUG=chrome-os-partner:58966
Change-Id: If895e52791dc56e283261b3438106116b8b2ea05
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17129
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add the necessary infrastructure to support eSPI SMI events,
and a mainboard handler to pass control to the EC.
BUG=chrome-os-partner:58666
TEST=tested on eve board with eSPI enabled, verified that lid
close event from the EC during firmware will result in an SMI
and shut down the system.
Change-Id: I6367e233e070a8fca053a7bdd2534c0578d15d12
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17134
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Export the pmc_gpe_init() function from pmc.c to pmutil.c
so it can be used in bootblock, and then call it from there
to initialize any GPEs for use in firmware.
BUG=chrome-os-partner:58666
TEST=test working GPE as TPM interrupt on skylake board
Change-Id: I6b4f7d0aa689db42dc455075f84ab5694e8c9661
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17135
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add the SOC definition for acpi_get_gpe() so it can be used
by the I2C TPM driver. Also add the I2C support code to
verstage so it can get used by vboot.
BUG=chrome-os-partner:58666
TEST=boot with I2C TPM on skylake board
Change-Id: I553f00a6ec25955ecc18a7616d9c3e1e7cbbb8ca
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17136
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The Deep S3 state will lose a lot of register contents that we
used to rely on for determining wake source.
In order to make use of this override the enable bit for wake
sources that are enabled for Deep S3 in devicetree.cb.
BUG=chrome-os-partner:58666
TEST=check for _SWS reporting wake source on S3 resume on skylake
Change-Id: If5113d6890f6cbecc32f92af67a29952266fe0ac
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17137
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Remove the FADT from the individual mainboards and select and
use COMMON_FADT in the SOC instead. Set the ACPI revision to 5.
Change-Id: Ieb87c467c71bc125f80c7d941486c2fbc9cd4020
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17138
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The STABLE build of FILO does not build anymore with the
current HEAD of coreboot. However, the current HEAD of FILO
does build with the current HEAD of coreboot. Update FILO
STABLE to FILO HEAD.
Change-Id: I4eece3aaada0dfdf4da106d5d260b5b361537558
Signed-off-by: Kevin Paul Herbert <kph@platinasystems.com>
Reviewed-on: https://review.coreboot.org/15195
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Lin Huang