Currently, all of the commands for building futility are printed as they
are run. This change skips printing the check for libcrypto unless the
check actually fails. This prevents the error from being displayed when
there isn't actually a problem.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I9ef36c0b64f7cd69d19b8faabd165ef6651c838e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
With LinuxBoot Linux relied on the legacy method of fetching the RSDP
pointer to get ACPI. This uses a more modern approach available since
2018 on the Linux kernel, which involves filling in the zero page.
This method takes precedence over any other method of fetching the
RSDP in Linux (UEFI, Kexec, Legacy/BIOS). Some UEFI zealots are
threatening that legacy code will be removed from Linux so it's best
to already adapt to that possibility.
Tested on Qemu:
- With qemu the RSDP is always in the EBDA, so checking if Linux uses
the provided pointer is better done with a forced bad entry
- With a fake bad pointer Linux correctly does not find RDSP
Change-Id: I688b94608b03b0177c42d2834c7e3beb802ae686
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
If it is not cleared and the number of strings is fewer than last
iteration, the match[3] will keep the last value, which actually
should be empty.
Add assert to make sure the level is a legal value.
BUG=b:222038278
Change-Id: If14e0923fbb1648d83784eb5dc1411c93227db5a
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
cb_err_t was meant to be used in place of `enum cb_err` in all
situations, but the choice to use a typedef here seems to be
controversial. We should not be arbitrarily using two different
identifiers for the same thing across the codebase, so since there are
no use cases for serializing enum cb_err at the moment (which would be
the primary reason to typedef a fixed-width integer instead), remove
cb_err_t again for now.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Iaec36210d129db26d51f0a105d3de070c03b686b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
ADL encodes CK cycle time as tCKMin whereas Sabrina encodes WCK cycle
time. Encode tCKMin as per the respective advisories.
BUG=None
TEST=Generate the SPD and ensure that tCKMin is encoded accordingly.
Minimum CAS Latency time is also impacted and is encoded accordingly.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I99ada7ead3a75befb0f934af871eecc060adcb26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Denverton is a special version of IFD2 flash layout. It defines
10GbE firmware regions (11/12) and the IE (10) region which
other IFD2 platforms do not have. Denverton does not include the
legacy GbE region (3) or the EC region (8) which other IFD2
platforms do have.
TEST='ifdtool -p dnv coreboot.rom' and verify correct output
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Change-Id: I15939ce4672123f39a807d63c13ba7df98c57523
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It's easier to read and to add new packages when each package is on its
own line and they're sorted alphabetically.
Indenting them also makes it easier to see what's getting installed and
what's a command.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ibfe297bd408ed0783fcff09c1ecb5672fe785c48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62446
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The linkchecker tool is now being used to find broken links in our
websites. Since it's not needed for building anything, just add it to
the jenkins-node Dockerfile instead.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Iac2246b5378e556b5cd9f2107fc5a7e51d583b5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62445
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The variable `RM` is empty and thus set it to `rm`. While
executing the `clean` rule, run each `rm` command with the -f flag
to ignore non-existing files.
Also, disable the objutil feature locally fixing another build issue.
Change-Id: Icb17e2c924ef480f8ac6195f96cf495709a0a023
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62415
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously, cbfstool was tested as part of the coreboot build, but not
tested individually. This let a change that broke elogtool slip through.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I9e7b7a01d4a77ffdac932ba5af12cbd1ba96628b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
This reverts commit d74b8d9c99.
This change breaks the 'make all' build of the cbfstool tools
from the util/cbfstool directory unless libflashrom-dev is
installed, complaining that flashrom is not installed.
Even with libflashrom-dev installed, it breaks building
elogtool with the public version of libflashrom-dev.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I572daa0c0f3998e20a8ed76df21228fdbb384baf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62404
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The length should be checked before the PMU_STR_INS_INDEX(th) character
is accessed, otherwise it is going to an access violation.
Change-Id: I8b59eb34e1cb01fd6e2571fcebc28ef2084b6ec4
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I69c4b3cdd2473655064d1329d5319cffdba2425a
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
The rom layout for A/B recovery:
EFS -> PSP L1 0x48 -> PSP L2 A -> BIOS L2 A
0x4A -> PSP L2 B -> BIOS L2 B
The coreboot doesn't implement the AMD's A/B recovery. This is only
for the ROM layout. To save some flash space, the entire B section can
be eliminated.
To enable A/B recovery in PSP layout, add "--recovery-ab" to
amdfwtool.
TEST=Majolica(Cezanne)
Change-Id: I27f5d3476f648fcecafb8d258ccb6cfad4f50036
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add the information of substance and instance in the string for PMUI
and PMUD. It is amdfwtool's job to extract the number from the string.
Change-Id: I43235fefcbff5f730efaf0a8e70b906e62cee42e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
NixOS 21.11 introduced the option `programs.flashrom.enable`. The option
allows installing flashrom and hooking up its udev rules. Thus, set it
to `true` and add the user `user` to the `flashrom` group allowing it to
use the programmers.
Change-Id: I017ddb4314702a5252dfc0d05cd1e4961043d23b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
ADL supports 8B Bank Architecture, whereas Sabrina supports either BG or
16B Bank Architectures depending on the speed. This influences SDRAM
Density and Banks, SDRAM Addressing bytes in SPD. Encode them as per the
individual SoC advisories.
BUG=b:211510456
TEST=Generate SPDs for Sabrina.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ic854ccccb2b301e75d0f28cd36daf87fd41e07e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
ADL and Sabrina provide different advisories to encode Optional SDRAM
features (byte indices 7 & 9). Encode those bytes as per the respective
advisories.
BUG=b:211510456
TEST=Generate the SPD binaries for Sabrina.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Icac8ae148458162768a919d9690d7bf96734e6c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This change is mostly from CB:56644 patchset 3.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idece950bab260a099c9790485805cbe8ea641666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change is mostly from CB:56644 patchset 3.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4cb9bbb3d7fd5d7c9e33fbf656301c0beb2f1b47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change is mostly from CB:56644 patchset 3.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idcee9de9bc409a4dfe7d2f8c18ec5132f2747c33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add PCI IDs for Tiger Lake LP and Tiger Lake H devices and their GPIO
tables.
TEST: dump GPIOs on i5-1135G7, Tiger Lake H untested
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6071a999be9e8a372997db0369218f297e579d08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
For the generic board which uses Cezanne, we use the generic SPL
table. For the Guybrush Chromebook, we need to use a customized SPL
file.
BUG=b:216096562
Change-Id: I385b0fe13cb78a053c07127ec3ea1c61dc42c7e4
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Fix issue where registers always seem to contain their own offset.
After writing the desired register into SIRI, the requested data is
returned in SIRD. This register is 4 bytes after SIRI, commonly 0xA4.
Tested on TGL-H (SATA SIR registers are common), genuine data is
returned.
Change-Id: I322b11d53178e5b64e353c1b4e576548592c16c3
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Several recovery images for newer ChromeOS boards fail in
extract_partition() due to parted detecting that there are overlapping
partitions, and therefore failing to print the partition layout
(this is potentially a parted bug; requries further investigation).
To work around this, fall back to using fdisk, making the assumption
that ROOT-A is always partition #3, and calculate the partition
start and size using the sector size.
Test: successfully extract coreboot firmware images from recovery
images which previously failed to extract (fizz, octopus, volteer).
Change-Id: I03234170ba0544af9eb0879253f0a8e0e7bf33f5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Wile historically there was a unique recovery image for each Chrome OS
board/HWID (with matching names), this is no longer the case. Now,
multiple boards share a single recovery image, so adjust how the proper
recovery image is determined, and how the coreboot image is extracted from it.
Test: successfully extract coreboot images for older 1:1 boards (e.g. CAVE)
and newer 1:N boards (e.g. DROBIT)
Change-Id: If478aa6eadea3acf3ee9d4c5fa266acd72c99b7a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This patch adds a new --loglevel option to the CBMEM utility which can
be used either numerically (e.g. `cbmem -1 --loglevel 6`) or by name
(e.g. `cbmem -c --loglevel INFO`) to restrict the lines that will be
printed from the CBMEM console log to a maximum loglevel. By default,
using this option means that lines without a loglevel (which usually
happens when payloads or other non-coreboot components add their own
logs to the CBMEM console) will not be printed. Prefixing a `+`
character to the option value (e.g. `--loglevel +6` or
`--loglevel +INFO`) can be used to change that behavior.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I8458027083246df5637dffd3ebfeb4d0a78deadf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
`PLATFORM_IFD2` macro is more generic tag that can be associated with
early next SoC platform development which using IFDv2.
The current assumption is that newer SoC platform still uses the same
SPI/eSPI frequency definition being used for latest platform(TGL, ADL)
and if the frequency definition is updated later, `PLATFORM_IFD2' will
use latest frequency definition for early next SoC development.
And once upstream is allowed for new platform, platform name will be
added in tool later.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I14a71a58c7d51b9c8b92e013b5637c6b35005f22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
ADL and Sabrina have different advisory regarding encoding the bus
width. Encode the bus width as per the respective advisories.
BUG=b:211510456
TEST=Build spd_gen and ensure that the bus width is encoded as expected.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ia12a5bd8f70a70ca8a510ecf00f6268c6904ec25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
In order to provide the same loglevel prefixes and highlighting that
were recently introduced for "interactive" consoles (e.g. UART) to
"stored" consoles (e.g. CBMEM) but minimize the amont of extra storage
space wasted on this info, this patch will write a 1-byte control
character marker indicating the loglevel to the start of every line
logged in those consoles. The `cbmem` utility will then interpret those
markers and translate them back into loglevel prefixes and escape
sequences as needed.
Since coreboot and userspace log readers aren't always in sync,
occasionally an older reader may come across these markers and not know
how to interpret them... but that should usually be fine, as the range
chosen contains non-printable ASCII characters that normally have no
effect on the terminal. At worst the outdated reader would display one
garbled character at the start of every line which isn't that bad.
(Older versions of the `cbmem` utility will translate non-printable
characters into `?` question marks.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I86073f48aaf1e0a58e97676fb80e2475ec418ffc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
SPL: Security Patch Level
The data in SPL is used for FW anti-rollback, preventing rollback of
platform level firmware to older version that are deemed vulnerable
from a security point of view.
BUG=b:216096562
Change-Id: I4665f2372ccd599ab835c8784da08cde5558a795
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add support to generate SPD binary for Sabrina SoC. Mainboards using
Sabrina SoC are planning to use LP5 memory technology. Some of the SPD
bytes expected by Sabrina differ from the existing ADL. To start with,
memory training code for Sabrina expects SPD Revision 1.1. More patches
will follow to accommodate additional differences.
BUG=b:211510456
TEST=make -C util/spd_tools.
Generate SPD binaries for the existing memory parts in
lp5/memory_parts.json and observe that SPDs for Sabrina is generated as
a separate set without impacting the ADL mainboards.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I2a2c0d0e8c8cbebf3937a99df8f170ae8afc75df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Some Intel SoCs such as Denverton support additional SPI regions for
things like Innovation Engine firmware or 10GbE LAN firmwares
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Change-Id: Ia5a450e5002e9f8edee76ca7c2eede9906df36c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Currently, the function normalize_dirs() fails if the directories lib32
and lib64 don't exist. That can be fixed by using an rm -rf on it
instead of rmdir.
The cmake build doesn't create those directories, so was showing a
failure message after the build was already completed. That's fixed by
removing normailze_dirs() from the build_CMAKE() function.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iea6e3ca57fb91ff1234be875861b27a78972d9ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This is to reduce difference with linux v5.16.
Change-Id: I7abd4d8eed856eee841422515db2ff7f50ecd0a4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This is to reduce difference with linux v5.16.
Change-Id: I3bdf880c8b6068467665865b7cf1249d1047e833
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This is to reduce difference with linux v5.16.
Change-Id: I1b7bc2b4ec832f0abeda215c381856a5ec153883
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This is to reduce difference with linux v5.16.
Change-Id: I4aa7abce83b41ccd5129717cd3bf85be19ec4807
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Also use '$minimum_perl_version'.
This is to reduce difference with linux v5.16.
Change-Id: I7c2f5d5c9853dc8ddc8f89a5e2edd6c8613ba790
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This is to reduce difference with linux v5.16.
Change-Id: Ifeb9c4406737fa24f9bd803af48d8b8d17654940
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Patch 423e9e0fc0: Documentation/lint: Use Super I/O instead of SuperIO
added the word SuperIO to the checkpatch spelling list.
There were unfortunately some issues with this.
1) This introduced a problem because the comparison is used in different
cases in different places. The misspelled word is compared ignoring
the case, but when looking for the correct word, it looks through the
list for the misspelling in all lowercase. When it couldn't find the
word "superio" in the list, the variable came back uninitialized.
2) The spellcheck feature isn't enabled in checkpatch unless the option
--strict is enabled, so this wasn't getting reported anyway.
3) SuperIO (or superio) will match the KCONFIG options such as
CONFIG_SUPERIO_NUVOTON_NCT5104D, and suggest "Super I/O" which doesn't
make any sense.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I464305af539926ac8a45c9c0d59eeb2c78dea17a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Adding gif files to the whitespace exclude list, to prevent issue where
commits were failing due to binary files.
Change-Id: I56679780348579d01c81c6f1677e4ea456315c9e
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61460
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Handle older CrOS firmware which lacks a COREBOOT FMAP region
- Add support for all blobs used in CrOS firmware 2013 to current
- Put extracted blobs in their own directory
Change-Id: Idaa39eca3be68a9327cead9b21c35a6c7a3a8166
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Martin Roth