this and re-commiting so that the history and comments are correct.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3284 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
rdtsc.h shouldn't be included unless we really need it (and use it).
Trivial.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3283 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
pci_write_config8.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3282 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- W83627THF is strapped to 0x4e, not 0x2e
- there's no device 9 on PCI-E x1 bus, it should be device 0
- add mptable entries for AGR slot, based on info in user manual
- enable floppy drive controller so that some legacy VGA ROMs will work
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3279 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
buildrom and this bit was forgotten during r3092.
This is a trivial patch.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3278 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Two bits indicate OK and BAD for each operation PROBE READ ERASE WRITE.
8 bits out of 32 are in use now. No bits set means nothing has been tested.
For chips with at least one operation that is not tested or not working, the
user is asked to email a report to a special email adress so that the table
can be updated.
All chips are TEST_UNTESTED for now.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
for both serial ports, making it challenging to use COM2 for the early
console.
Enable the traditional I/O ranges 0x3f8 for COM1 and 0x2f8 for COM2.
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3276 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Bari Ari <bari@onelabs.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3275 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
devices, because they need an unlock command first.
For this reason, ST M50FLW support is moved to a
new HW support module, because any change in jedec.c
would bear the risk to cause problems with the already
supported devices.
It's already tested with ST M50FLW080A; the other
chips of this family i dont have available, so i couldnt
test it.
Signed-off-by: Claus Gindhart <claus.gindhart@kontron.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3274 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
flashchips table. The read pointer was already checked properly.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3273 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add a gettimeofday() implementation - it works pretty well, but it
drifts a little bit so its not very suitable for keeping time. It
works best to track changes in time over small periods of time.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3272 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This was causing the returned counter value to be one more then it
should be when printing a single character.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3271 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The qemu keyboard controller defaults to using scancode set 2, we use set 1.
Turn on the translate mode in the keyboard controller to force the issue.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3270 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Apparently the previous version worked on luck. Fix the allocation
and add parens to better guide the compiler. Also, halt() if
the heap is poisoned (like by an overrun). Finally, fix calloc()
so that it actually works.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3269 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The FAM10 code takes up more space in the uncompressed "ROMCC" portion
of coreboot. Also, It is still growing as features are added.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3267 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This doesn't save any space for me but it is the right thing to allow GCC to
optimize.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Peter did a nice job cleaning up my initial patch. Thanks!
Signed-off-by: Marc Jones <marc.jones@amd.com>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3263 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Disabling it should help performance.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3262 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
is based on amd-lx800/cs5536.
Tutorial: http://www.coreboot.org/IEI_LX_800_Build_Tutorial
Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3261 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
layout option, as well as areas, whose flash contents already contain the
desired data, will be skipped.
These ensures absolute data security of critical areas (BIOS boot block),
e.g. against a sudden power off or a CPU hangup during flashing. As a
nice side effect, it speeds up the flash process, if the BIOS to be flashed
is very similar to the version in flash.
Signed-off-by: Claus Gindhart <claus.gindhart@kontron.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3260 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
needs 172 more bytes, give it 512 and hope that's enough for a while.
Trivial.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3259 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
white space in the s2892 and s2891 mptable.c files.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3256 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This chip seems to be very similar to the SMSC DME1737, for coreboot
purposes it might even work without any code changes.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3254 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
secondary controller was ok). There were two problems: the master sata
controller was not being initialized, and the irqs for the secondary ports on
both controllers were not being set in the mptable.
Thanks for Jonathan Kollasch for all the help figuring out the IRQ problem.
While all ports work reliably under a recent kernel (2.6.24), sata is about
half as fast as under the proprietary bios, according to bonnie++. That still
needs fixing...
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3253 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Pstate intialization has moved to early init because it requires a warm reset.
Add CPUID setup and disable SMM access to late initialization.
Much of this code is leftover from porting from K8.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3252 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Supports single and split plane systems. Set P0 on all cores for best performance.
All APs will be in hlt(C1).
The platform warm rest logic has been updated to alway reset for HT and FID/VID setup. It is not optional anymore.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3251 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
In addition, AP microcode is now updated in early initialization to support errata settings that require it.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3250 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add early MSR and PCI register initialization.
This fixes many default setting as well as erratas.
Some CPU core functions were moved from the HT init and platform specific code
to the generic Fam10 CPU code.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3249 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This fixes many default setting as well as erratas.
Some CPU core functions were moved from the HT init and platform specific code to the generic Fam10 CPU code.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3248 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It displays the coreboot printk buffer in RAM and let's you scroll through it.
This feature is only available for coreboot v3 though, as v2 doesn't have a
printk-buffer feature, yet.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3247 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This solves the multiple keystroke issue that popped up recently.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3245 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generic SMSC support, and corrects a small typo.
With this patch, coreboot v2 on a mainboard with SCH3112 has been
demonstrated to correctly use the serial port. No other chip
functions were tested.
Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3244 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
a bit less awkward (pun intended).
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3243 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
checking for --build-id, if the user has specified one by setting CC
in the environment; there's no point in checking the native linker in
this case.
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3242 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
into the payloads/external/tint directory.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3239 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Use a simple one-liner for each of the functions. You can surely optimize
the code some more, but I chose not to do that in order to keep it readable.
When compiling with -Os the size differences are minimal.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3236 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
of functions while we're at it.
hex2bin() now also supports upper-case input characters.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3235 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Jordan Crouse