Commit Graph

37768 Commits

Author SHA1 Message Date
Angel Pons 9f6cdbaaf5 Revert "broadwell: update processor power limits configuration"
This reverts commit fa42d568a0.

Reason for revert: Passes in an incompatible structure and only happens
to boot by chance. Moreover, Broadwell will soon be merged with Haswell
and this requires Broadwell to not depend on any Intel common SoC code.

Tested on out-of-tree Acer Aspire E5-573, PL values are correct again.

Change-Id: I6e8e000dba8ff09fab4e6f174ab703348dcd6a96
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45011
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30 00:45:08 +00:00
Angel Pons a6f02a8c49 soc/intel/broadwell/cpu.c: Re-add `configure_thermal_target`
Commit 360684b (soc/intel/common: add TCC activation functionality) made
Broadwell use common SoC code. However, this makes Broadwell depend on
SoC code, which prevents splitting Broadwell into CPU, northbridge and
southbridge, a stepping stone before merging with Haswell and Lynxpoint.

Tested on out-of-tree Acer E5-573, still boots.

Change-Id: Ib7ab4e75bd4416dde4612e67405a871da569008a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46731
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30 00:44:44 +00:00
Angel Pons d79b87a1d6 mb/google/auron: Add SATA PCI device to overridetree
`chip` entries are only hooked up via device nodes to the tree. A `chip`
without a `device` below it does nothing. To allow variants to override
SATA tuning parameters, ensure a device exists under the PCH chip scope.

Without this change, some variants would not properly override the SATA
tuning parameters after extracting the PCH parts into a different chip.

TEST=Sanity-check static.c and verify overridetrees override properly.

Change-Id: I013dbe1403567b93c8ee0e66f76481f2a3f42796
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46769
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30 00:44:13 +00:00
Angel Pons 34672f2bc4 mb/purism/librem_bdw: Prepare devicetree for PCH split
Tested with BUILD_TIMELESS=1, all variants remain identical.

Change-Id: I0fe6de35f7471ce173df40db1444153623544f00
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46705
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30 00:43:51 +00:00
Angel Pons 5e60637ef6 mb/intel/wtm2: Prepare devicetree for PCH split
Tested with BUILD_TIMELESS=1, coreboot.rom remains identical.

Change-Id: I75d6594f9576c96a585526c652a070cb9616dbe9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46704
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30 00:43:24 +00:00
Angel Pons f2a295a5b6 mb/google/jecht: Prepare devicetree for PCH split
Tested with BUILD_TIMELESS=1, all variants remain identical.

Change-Id: I0fa486b8a0fc8be974f37d0bb4eb77a254e8cd86
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46703
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30 00:43:00 +00:00
Wisley Chen c1f58e68fb mb/google/volteer: correct memory id for elemi
BUG=b:170604353
BRANCH=volteer
TEST=emerge-volteer coreboot, and boot into kernel.

Change-Id: If354aa158f3ad60193268f38278a44f9c99bf3db
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46770
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29 17:45:10 +00:00
Matt Ziegelbaum dbf74dc80a hatch: Create ambassador variant
Create the ambassador variant of the puff reference board by copying
the template files to a new directory named for the variant.

(Auto-Generated by create_coreboot_variant.sh version 4.2.0).

BUG=b:171561514
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_AMBASSADOR

Signed-off-by: Matt Ziegelbaum <ziegs@chromium.org>
Change-Id: Ib0e3a813a120a4a8e984f3a89dc3ba100d94da95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-29 17:33:11 +00:00
Marc Jones 8b522db474 soc/intel/xeon_sp: Move function debug macros
Move the macros for printing debug information to debug.h in the
common console include directory and device include file.
These are available if the platform selects DEFAULT_CONSOLE_LOGLEVEL_8.

The macros could be used by any platform.

Change-Id: Ie237bdf8cdc42c76f38a0c820fdc92e81095f47c
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-29 16:44:19 +00:00
Marc Jones 5b5c52e8de include/device/device.h: Move resource debug macros
Add general debug macros that print resource information.
These are available to select if DEFAULT_CONSOLE_LOGLEVEL_8.
The macros are helpful in debugging complex resource allocation
with multiple buses. The macros are moved from soc/intel/xeon_sp,
where they were originally developed.

Change-Id: I2bdab7770ca5ee5901f17a8af3a9a1001b6702e4
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-29 16:43:00 +00:00
Subrata Banik b544fe48af mb/intel/adlrvp: Add dq_pins_interleaved into 'struct mb_cfg'
List of changes:
1. Split mem_cfg for DDR4 and LPDDR4 as per board_id
2. Move dq_pins_interleaved into board-specific memory configuration
information

TEST=Able to build and boot DDR4 and LPDDR4 ADLRVP SKUs.

Change-Id: I6ef19209767c810426bba0c8bc48178bf2e2a110
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46873
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29 10:49:03 +00:00
Huayang Duan 68e597d81e soc/mediatek/mt8192: Do dram full calibration
If no correct params were found in flash, do dram full calibration.
Full calibration will load blob, dram.elf.
  Blob version: v3, size: 320KB.

Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Change-Id: I2d4437a4e4c770de084927018d4dd3f2e8b87fb1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-29 00:30:34 +00:00
Nico Huber 3ff948651a mb/asus/f2a85-m_pro: Enable super-I/O LDNs 0x0f and 0x14
The LDNs don't have a 0x30 register to enable them. However,
with the devices set to `off`, coreboot won't configure them.

Change-Id: Iaea37c88524904a1dae8a6d3b5f07c6ea25bc3b2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46021
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29 00:01:51 +00:00
Nico Huber 394bd94e0c mb/asus/f2a85-m_pro: Clean up super-I/O GPIO settings
Drop useless writes to read-only registers and don't re-write
default 0x00 values. In detail:

* Don't write read-only status registers.
* Don't try to write input bits in data registers
  (iow. mask data values: `data &= ~io`).
* Don't write data registers if all GPIOs are set as
  inputs (`io == 0xff`).
* Don't write default 0x00 for inversion and multiplex
  registers.

Note: Both GPIO0 and WDT1 values look spurious. Maybe they
were dumped with the virtual devices disabled?

Change-Id: I7d948d6b697285e61e4352b7354b924dbf511e9a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46020
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29 00:01:40 +00:00
Nico Huber 0082a3e59e mb/asus/f2a85-m_pro: Comment and group super-I/O GPIO settings
Change-Id: I8f5a87d006f8bf20af40f7a4f09b1e4b597ba79f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46019
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29 00:01:28 +00:00
Nico Huber 0258465373 mb/asus/f2a85-m_pro: Enable GPIO0 on the super I/O
It is enabled by the vendor firmware.

Also drop spurious `io 0x60 = 0x00` setting. It's the default anyway
and the resource is kept disabled (it's controlled by the virtual
LDN 2e.008).

This fixes the hang in `PCI: 00:14.3 init` when doing
`outb(0, DMA1_RESET_REG)`.

Fixes: 2f8192bc ("asus/f2a85m_pro: Fix superio type in devicetree")
Change-Id: I351c93033bf2afd824eb6baa8d7625e7a33a295a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-29 00:01:23 +00:00
Nico Huber e50f546e01 payloads/filo: Set stable tag to something that builds
Also rename the prompt to "tested" to make it more obvious that there
is no really stable version.

Change-Id: Ib719fe5c30783a53ddad2a2dc2d9ecda37a05ac2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by:  Felix Singer <felixsinger@posteo.net>
2020-10-28 23:42:45 +00:00
Michael Niewöhner 310c7637da soc/intel: deduplicate ACPI timer emulation
The code for enabling ACPI timer emulation is the same for the SoCs
SKL, CNL, ICL, TGL, JSL and EHL. Deduplicate it by moving it to
common code.

APL differs in not having the delay settings. However, the bits are
marked as "spare" and BWG mentions there are no "reserved bit checks
done". Thus, we can write them unconditionally without any effect.

Note: The ACPI timer emulation can only be used by SoCs with microcode
supporting CTC (Common Timer Copy) / ACPI timer emulation.

Change-Id: Ied4b312b6d53e80e71c55f4d1ca78a8cb2799793
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-28 21:28:19 +00:00
Maxim Polyakov 72e49cef80 mb/ocp/tiogapass/dsdt: Remove unnecessary comments
Change-Id: I6a16e2f829219f2eba8acd3ae7f371238c0d8de1
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-10-28 21:03:02 +00:00
Stefan Reinauer e4e08f2bfe ifdtool: add "reserved" regions
This will let you at least dump / add these regions.

Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I195ba5e93823603e712cd16cecbb48141302bed6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-10-28 19:41:51 +00:00
Josie Nordrum 65d0ef7cbd mb/google/zork: Revert temp acpi backlight fix
Remove code to turn on backlight during ACPI mode because backlight has
been properly enabled in ACPI.

BUG=b:158087989
BRANCH=Zork
TEST=tested backlight during reboot and suspend

Signed-off-by: Josie Nordrum <JosieNordrum@google.com>
Change-Id: I3bf06042aa19e4559127d611d401f0ba0516b3a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-28 17:18:15 +00:00
Josie Nordrum 0310fe7bdc mb/google/zork: Generate acpi methods in mainboard.c
Generate acpi methods which enable and disable backlight during _INI,
_WAK, and _PTS.

BUG=b:158087989
BRANCH=Zork
TEST=check backlight during reboot and suspend

Signed-off-by: Josie Nordrum <JosieNordrum@google.com>
Change-Id: I2f3434dc92de1f697693ff69ca15bd76647b89a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46671
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-28 17:18:00 +00:00
Josie Nordrum da4d9da51a soc/amd/picasso/acpi: Include platform.asl
Include platform.asl to link acpi methods for _INI, _WAK, and _PTS to
correctly enable backlight in OS for zork.

BUG=b:158087989
BRANCH=Zork
TEST=check backlight during reboot and suspend

Signed-off-by: Josie Nordrum <JosieNordrum@google.com>
Change-Id: I702f807a5907d85d083295cf339ba9d31b246627
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-28 17:17:38 +00:00
Josie Nordrum 77f4b7fe0c soc/amd/common/acpi: Create platform.asl to define acpi transitions
Define device _WAK, _PTS, and _INI acpi methods with callbacks into
mainboard methods if provided.

BUG=b:158087989
BRANCH=Zork
TEST=tested backlight during reboot and suspend

Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: I8020173a15db1d310459d5c1de3600949b173b00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46669
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-28 17:17:22 +00:00
Arthur Heymans 3603960d4d sec/intel/txt/Kconfig: Remove the menu for including ACMs
This is consistent with how other binaries (e.g. FSP) are added via
Kconfig. This also makes it more visible that things need to be
configured.

Change-Id: I399de6270cc4c0ab3b8c8a9543aec0d68d3cfc03
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-28 12:55:43 +00:00
Arthur Heymans ccb1119738 sec/intel/txt/Makefile.inc: Include ACMs using Kconfig variables
The Kconfig variables are used in the C code for cbfs file names but
not in the Makefiles adding them.

Change-Id: Ie35508d54ae91292f06de9827f0fb543ad81734d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-28 12:55:29 +00:00
Tim Wawrzynczak 6ad856825a drivers/mrc_cache: Fix size comparison in mrc_cache update
`mrc_cache_needs_update` is comparing the "new size" of the MRC data
(minus metadata size) to the size including the metadata, which causes
the driver to think the data has changed, and so it will rewrite the
MRC cache on every boot. This patch removes the metadata size from
the comparison.

BUG=b:171513942
BRANCH=volteer
TEST=1) Memory training data gets written the on a boot where the data
was wiped out.
2) Memory training data does not get written back on every subsequent
boot.

Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7280276f71fdaa492c327b2b7ade8e53e7c59f51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-28 10:43:41 +00:00
Seunghwan Kim 71b546773d mb/google/nightfury: Set internal pull-down for GPP_D19
Add internal pull-down for GPP_D19 to improve DMIC noise issue on
nightfury.

BUG=b:171669255
BRANCH=firmware-hatch-12672.B
TEST=Built and checked GPP_D19 voltage after booting

Change-Id: Ie63f260be3d6a55f91908db59312b3b0a8af98f4
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-28 10:43:25 +00:00
Maxim Polyakov e828554ee0 mb/ocp/tiogapass/acpi: Exclude uncore.asl from _SB scope
The corresponding devices and objects are already included in the
System Bus ACPI scope inside uncore.asl. There is no need to do this
again in the DSDT of the motherboard.

Change-Id: I98a8d60b585e2eafd76948baea0f249a029bae09
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-28 10:10:14 +00:00
Morgan Jang bdd863689d src/soc/intel/xeon_sp: Fill in the cache information in SMBIOS type 7
TEST=Execute "dmidecode -t 7" to check if cache error correction type
and cache sram type is correct for each cache level

Change-Id: Ibe7c6ad03a83a6a3b2c7dfcfafaa619e690a418d
Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-28 10:09:32 +00:00
Morgan Jang 160cb331fc soc/intel/xeon_sp/cpx: Set SLEEP_BUTTON flag in ACPI FADT
Keep SLEEP_BUTTON flag in ACPI FADT to indicate that no sleep button
is present on Cooperlake platform.

Change-Id: I2ce435a7bda780b2d2ed00be3f3a8a080c4434ab
Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-28 10:09:14 +00:00
Jingle Hsu 83a2a007c7 mb/ocp/deltalake: Rename motherboard_fill_fadt()
Rename motherboard_fill_fadt() to the common override
mainboard_fill_fadt() function to override FADT.

Tested=On OCP Delta Lake, verify FADT PM Profile is set to
Enterprise Server.

Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Change-Id: Ie9ea7cc6e712d0aca57bbeac1a4154921d123be4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-28 02:33:38 +00:00
CK Hu bd0a222ab4 mb/google/asurada: Pass reset gpio parameter to BL31
To support gpio reset SoC, we need to pass the reset gpio parameter to
BL31.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I2ae7684a61af76693605cc0bcf8d20c8992c7bff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46388
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-28 02:01:10 +00:00
Wenbin Mei fc38e88341 mb/google/asurada: Configure pinctrl for SD and MMC
The pins for SD and MMC must be configured properly
so we can access them in payloads.

Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Change-Id: Ie6bdffb987d5acf286645550f1c53f294f71c38a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-28 02:00:52 +00:00
Andrey Pronin 441c63d5f0 security/vboot: fix policy digest for nvmem spaces
This CL fixes the policy digest that restricts deleting the nvmem spaces
to specific PCR0 states.

BRANCH=none
BUG=b:140958855
TEST=verified that nvmem spaces created with this digest can be deleted
     in the intended states, and cannot be deleted in other states
     (test details for ChromeOS - in BUG comments).

Change-Id: I3cb7d644fdebda71cec3ae36de1dc76387e61ea7
Signed-off-by: Andrey Pronin <apronin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46772
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-28 01:29:37 +00:00
Kevin Chiu 5b511f98b5 mb/google/octopus/var/garg: Disable XHCI LFPS power management by sku
LTE module Fibocom L850-GL is lost after idle overnight,
with this workaround, host will not initiate U3 wakeup
at the same time with device, which will avoid the race condition.

If this option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR +
offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0.

BUG=b:171478764
BRANCH=octopus
TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash
     the image to the device. Run following command to check if
     bits[7:4] is set 0:
     >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"

Change-Id: I213fed2b56f216747b2727b69f97d46d8c0c872e
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46701
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27 16:35:24 +00:00
Kevin Chiu fd3dde3e33 mb/google/octopus/var/garg: fix LTE power sequence in reboot state
invoke LTE power off function to meet LTE power sequence while DUT is
in reboot state.

BUG=b:167565015
BRANCH=octopus
TEST=build and verify on the DUT with LTE

Change-Id: I825cefb524ddaf9a9cb6add31c2ee0eea484f978
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46022
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27 16:35:22 +00:00
Felix Singer 05b883ed24 device: Rephrase bus master Kconfig option
Change-Id: I902915133035fb2adff7edd9c931d4b1d3e7dc40
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-27 15:35:42 +00:00
Martin Roth 93122a7e77 util/testing: Allow what-jenkins-does to skip lint testing
The linters touch every file under src and probably util.  This makes
it difficult to see what files have been accessed by the builder.

The JENKINS_SKIP_LINT_TESTS variable will only be set on the jenkins
build that looks for unused files.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I12fa31641c2a72c5e07be1c4958467f7165f21bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-27 10:10:56 +00:00
Martin Roth b043277866 util/testing: Update test-abuild output directories
This matches the what-jenkins-does target.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I20b455e0161dcebf2eb9022bd142bbec99937a19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-27 10:10:14 +00:00
Martin Roth 2aba15fce1 util/docker: Update atime mount point options for jenkins
- The ccache files don't need atime.
- Enable strict atime for the git repos.  This will help find unused
files.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I94bcc55ea5c5a74f3ad0292ca50b74874a0d920d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-27 10:09:50 +00:00
Martin Roth a266299490 util/docker: Update agent-root to node-root for jenkins
Jenkins has changed the name of the build directory, so it's not
currently building out of memory, it's writing to the SSD. This
changes the build back to tmpfs.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Iefcf53757862feb2025aa5696f9f5dbce9dd70dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-27 10:09:06 +00:00
Martin Roth 7d520ff98f util/docker: Add tests to coreboot-sdk build process
This tests some of the basic targets that coreboot-sdk needs to be
able to run.

I was running most of these tests manually after creating the sdk
image, but adding it into the Dockerfile makes sure they get run.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I0d4a2ad82042733a7966edb8ccf927676618977c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-27 10:08:45 +00:00
Martin Roth ebeec5aed3 util/docker: Update coreboot-sdk consolidate coreboot build
Because docker saves a container for every run command, by breaking
the coreboot build into 3 commands, it greatly increased the size of
the docker containers needed.  When combined as one run command, the
coreboot repo that is downloaded, along with the coreboot test build
are deleted before the container is created.  Since those directories
are deleted in a later run command, they don't even make it into the
final container, and just force coreboot-sdk users to download extra
data for no reason.

While splitting the build may help with debugging failures when
creating the docker container, that debugging can be done locally by
splitting up a working copy.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ia28ee4e22c0a76dc45343755c45678795308adca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-27 10:07:20 +00:00
Martin Roth b86d2b0935 util/docker: Update coreboot-sdk to set python2 as default
Even though both python2 and python3 are now installed to the SDK, the
default python program is not.  This sets the default to python2.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I4220c316df86cb2481143a79fadb70fc734e6879
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-27 10:06:17 +00:00
Martin Roth bd8e6dd2ca util/docker: Update coreboot-sdk with additional tools
- cscope: Run cscope targets
- ctags: Run ctags targets
- pbzip2: Allow compression on all cpu cores

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I31ca45fcc5880f2b0346ca3f7d36a71ae18da979
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-27 10:06:00 +00:00
Angel Pons 99af210456 mb/google/auron: Prepare devicetree for PCH split
Tested with BUILD_TIMELESS=1, all variants remain identical.

Change-Id: I2b088b36c8e9ff9cbd47d625b14fc45ebd96532a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46702
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27 10:05:35 +00:00
Martin Roth ce19f4f8ad util/testing: Remove test for util/broadcom/secimage
util/broadcom/secimage was removed in commit aea00f496b, so don't
try to test it anymore.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ibcc018a6b8ed4ecd407f2dc374cec62900920a92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-27 10:05:15 +00:00
Ren Kuo 12b376c87f mb/google/dedede/var/magolor: Configure I2C high and low time
Configure the I2C bus high and low time for all enabled I2C buses.

BUG=b:168783630
TEST=Measured the I2C bus frequency reduce to 387 KHz.

Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: I9f5b81815f86db7bdcea95a95b9c9b235b4a34b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46613
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27 06:13:43 +00:00
Jonathan Zhang 8f594b7319 cpu/x86/mtrr: fix OVERFLOW_BEFORE_WIDEN
Integer handling issues:
Potentially overflowing expression "1 << size_msb" with type "int"
(32 bits, signed) is evaluated using 32-bit arithmetic, and then
used in a context that expects an expression of type "uint64_t"
(64 bits, unsigned).

Fixes: CID 1435825 and 1435826

Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: If859521b44d9ec3ea744c751501b75d24e3b69e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46711
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27 06:13:32 +00:00