A bigger than zero value of bmc_boot_timeout must be set
for KCS ipmi_get_bmc_self_test_result() to run, otherwise
the self test result will be error and won't write SMBIOS
type 38 table. Here we set 60 seconds as the maximal self
test timeout.
Tested=Check if the BMC IPMI response data and SMBIOS type
38 on OCP Tioga Pass are correct or not.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I3678973736a675ed22b5bc9da20a2ca947220f4b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
To use Intel common block LPC function that enables the IO ranges
defined in devicetree.cb.
Tested on OCP Tioga Pass with BMC LPC working.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I675489d3c66dad259e4101a17300176f6c0e8bd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38994
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The timing tables for Sandy Bridge are a subset of Ivy Bridge's tables.
Move the latter to a common place, and use it for both generations.
Tested on Asus P8Z77-V LX2 with an i7-2600 and an i5-3330, both work.
Change-Id: Id14227febf4eebb8a2b4d2d4f37759d0f42648c6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39735
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Nuvoton NCT5104d has no LDN 0xe according to its datasheet.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I0d34218d88b779b08c380d2396ff9ab9253597fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Enable ASPM L0s and L1, Common Clock and Clock Power Management for
all PCIe ports.
TEST=boot Debian linux and check new PCIe capabilities appear in lspci
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I0a4c83731742f31ab8ef1d326e800dfdc2abb1b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
PC Engines apu2 had many problems with PCIe cards detection. The cards
were inconsistently detected when booted from G3, S5 or after a reboot.
AGESA can reset PCIe slots using GPIO via callback. Use it to reset the
slots that support using GPIO as reset signal.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8ff7db6ff85cce45b84729be905e6c895a24f6f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The `link_frequency_270_mhz` setting was originally used by the native
graphics init code for Sandy/Ivy Bridge, which is long gone.
The value of this information (which board had it set) is questionable.
The only board that had an LVDS panel and set it to 0 was the ThinkPad
L520, where native graphics init was never reported to work. Also, the
native graphics init only used it for calculations, but never confi-
gured the hardware to use a specific frequency. A look into the docu-
mentation also doesn't reveal any straps that could be used to confi-
gure it.
Change-Id: Ieceaa13e4529096a8ba9036479fd84969faebd14
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39763
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PWM-granularity chicken bit in the Wildcat Point and Lynx Point
PCHs has actually the opposite meaning of the one for Sunrise Point
and later. When the bit is set, we get a divider of 16, when it's
unset 128. Flip the bit!
Change-Id: I1dbde1915d8b269c11643a1636565a560eb07334
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
_DCS, _DGS and _DSS are required by specification. However,
we never implemented them properly, and no OS driver com-
plained yet. So we stub them out and keep the traditional
behavior in case an OS driver checks for their existence.
The old implementations also only returned static values as
there never was any write to their GNVS variables. The TRAP()
that was called in one place is actually implemented by some
ThinkPad's SMI handler as docking event. However, as the call
precedes these SMI handlers in coreboot history, it's most
likely an accident.
Change-Id: Ib0b9fcdd58df254d3b2290900e3bc206a7abd92d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Add the inteltool path to the include path to be able to avoid ugly
include hacks like `#include "../inteltool.h"`.
Change-Id: Id363fa20fe3b52248a224ca14b2626a8e3ce44a2
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39744
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The format for VPD has changed s.t. the first NIC should
always have a zero concat to the end. drivers/net supports
this with the workaround of setting the idx to 1.
The longer term fix is to adjust all the respective boards
to shift back by one and adjust drivers/net friends to
remove the 'special casing' of idx == 0.
Background:
https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn
BUG=b:152157720
BRANCH=none
TEST=none
Change-Id: I510428c555b92398a5199b346dffb85d38495d74
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
According to the latest Tigerlake Platform FSP Integration Guide, the
minimum amount of stack needed for FSP-M is 256KiB. Change
DCACHE_BSP_STACK_SIZE to reflect that (plus 1KB previously determined
empirically). JSL requires 192KiB.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic9be6446c4db7f62479deab06ebeba2c7326e681
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Northbridge IOAPIC was not being initialized which caused its APIC ID to
be set to 0 (the same APIC ID as BSP).
TEST=boot Debian Linux on PC Engines apu2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Id06ad4c22a56eb3559e1d584fd0fcac1f95f13e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Now that we have it, we might as well pass it around.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: Ia5aa2f932321983f11d2f8869aa624832afe9347
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39721
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Native raminit asserts that the DIMMs haven't been replaced before
reusing the saved training data. However, it does not check if the CPU
is still the same, so it can end up happily reusing data from an Ivy
Bridge CPU onto a Sandy Bridge CPU, which runs the raminit_ivy.c code
path. This can make the CPU run in unsupported configurations, which may
result in an unstable system, or a failure to boot.
To prevent that, ensure that the stored CPUID matches the CPUID of the
installed CPU. If they differ, print a message and do not use the saved
data. As it does not pose a problem for a regular boot, but precludes
resuming from S3, use different loglevels depending on the bootpath.
Tested on Asus P8Z77-V LX2 with an i7-2600 and an i5-3330, works well.
Change-Id: Ib0691f1f849b567579f6afa845c9460e14f8fa27
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of storing an int with a single bit of information taken from
the CPUID, we might as well store the actual CPUID. And since we are
changing the definition of the saved data, bump the version number.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: I6ac435fb83900a52890f823e7614055061299e23
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39720
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When changing any of the structures that are cached in non-volatile
storage, it is necessary to bump MRC_CACHE_VERSION so that the old
information is not misinterpreted.
Change-Id: Idefbc38b3a8198b1b5909e775b3c289db689fc0c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39756
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Header files are supposed to not make allocations from .bss. Builds
fail if said file is included multiple times. To prevent this from
happening, move the definitions to a C file.
Also, rename raminit_patterns to raminit_tables. This is because more
tables that are not patterns will be added here in subsequent changes.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: If8e3a285ecdc4df9e978ae156be915ced6e1750b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39754
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make them fit in 96 characters, so that Jenkins does not complain.
With BUILD_TIMELESS=1, the binary of ASUS P8Z77-V LX2 remains identical.
Change-Id: I4a763f6050593e9d4db9211bfeedb442724e1ace
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39719
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ACPI Spec 2.0 states, that Processor declarations should be made
within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated
and is removed here for Intel CPUs only.
Tested on:
* X11SSH (Kabylake)
* CFL Platform
* Asus P8Z77-V LX2 and Windows 10
FWTS does not return FAIL anymore on ACPI tests
Tested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: Ib101ed718f90f9056d2ecbc31b13b749ed1fc438
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
According to BKDGs these northbridges should support the K10
compatible temperature sensors.
TEST=boot FreeBSD on PC Engines apu2 and check the thermal zone
temperature using sysctl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Icbdf44508085964452d74e084b133f1baa39e1a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
According to BKDGs HTC temperature limit field indicates the threshold
where HTC becomes active. HTC active state means that processor is
limiting its power consumption and maximum P-State. Using this threshold
as _CRT is incorrect, since HTC active is designed to prevent
overheating, not causing immediate shutdown.
Change the behavior of temperature limit to act as a passive cooling
threshold. Make the passive cooling threshold a reference value for
critical and hot temperature with 5 degrees step.
TEST=boot FreeBSD on PC Engines apu2 and check the thermal zone
temperature using sysctl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ife64c3aab76f8e125493ecc8183a6e87fb012e3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Fixes a blunder in commit 50db9c99be
(nb/intel/sandybridge: Use DIV_ROUND_UP macro to select timings).
Tested on Asus P8Z77-V LX2, still boots fine with an i7-2600.
Change-Id: I73436b9f7df9f3a065469fb89bcd0cc6183bb774
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
A certain somebody (that would be me) forgot how to count, it seems.
Change-Id: Iac0ac5827ca242c465a2e8be92a823c8fc9b2935
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39741
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IRQ 0x70 was not declared for device 2e.7, and coreboot whined about it.
Change-Id: If40aa390722cf253169003129b31f20543fde5dd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39739
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Linux does not handle either value in any special way, though.
Change-Id: I833cb94e65b9ddfb79edbcdd0216c70740aa4a16
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add camera ACPI configuration for Ripto/Volteer
BUG=None
BRANCH=None
TEST=Build and boot Ripto or Volteer. Start camera app and able to
capture images.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I2b47ccd989192273a29f09bf097e12e357929334
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
This is required for PD notifications on the cros_ec driver.
BUG=b:150649744
TEST=Boot volteer with this patch and verify that PD notifier events are
being generated.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Change-Id: I2e72320b025a3dfa7412181586cb142a4503eda5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Use information provided by AGESA to fill the SMBIOS memory tables.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Id73de7c2b23c6eb71722f1c78dbf0d246f429c63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Camera ACPI had an incorrect board config flag for TGL-UP4.
BUG=None
BRANCH=None
TEST=Build and boot TGLRVP-UP3 or UP4. Start camera app and able to
capture images.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: Ided0e146a9240169d3f1f27a86218ac1a942b899
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Add a script generated list of vboot enabled devices to the
documentation. Add a entry to the release checklist.
Change-Id: Ibb57d26c5f0cb8efd27ca9a97fd762c25b566f93
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If one branch has braces all should have them.
Change-Id: I94e70c6c6188768d9b37a2d154f4d5b8af31f78c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39396
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a function to set the RTC to provided struct tm.
Change-Id: I17b4c1ee0dcc649738ac6a7400b087d07213eaf0
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/23585
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently cbfstool cherry-picks a few files from vboot and hopes these
files will work standalone without any dependencies. This is pretty
brittle (for example, CL:2084062 will break it), and could be improved
by building the whole vboot library and then linking against it.
Therefore, this patch creates a new target $(VBOOT_HOSTLIB) and includes
it as a dependency for cbfstool and ifittool.
To prevent building the vboot lib twice (one for cbfstool and the other
for futility) when building coreboot tools together, add the variable
'VBOOT_BUILD' in Makefile to define a shared build path among different
tools so that vboot files don't need to be recompiled.
Also ignore *.o.d and *.a for vboot library.
BRANCH=none
BUG=none
TEST=make -C util/cbfstool
TEST=make -C util/futility
TEST=Run 'make tools' and make sure common files such as 2sha1.c are
compiled only once
TEST=emerge-nami coreboot-utils
Change-Id: Ifc826896d895f53d69ea559a88f75672c2ec3146
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It does not make sense to disable an optimization that was not enabled
before, especially if that optimization only applies to Ivy Bridge.
Tested, still boots and can suspend correctly with:
- Asus P8Z77-V LX2 with i5-3330 and Windows 10
- Gigabyte GA-H61MA-D3V with i5-2400 and Arch Linux
Change-Id: I9f3eb545585824bbdf51e33f0592e7daa1c425af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Johnny Lin