Change the comparison of build_timeless from -eq to =
This was generating an error if BUILD_TIMELESS wasn't set:
util/genbuild_h/genbuild_h.sh: line 27: [: : integer expression expected
This wasn't causing the script to fail, and won't even if 'set -e' is
added to the script because the error happens inside an 'if' clause,
which is specifically excluded from failue on 'set -e'.
Change-Id: I6a4e147ece23e83ee682d72db35be9e5d4088c78
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14080
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Commit c49014e (timestamp: add tick frequency to exported table)
refactors the code, but forgets to correctly scale the frequency to
megahertz, where the value is read from sysfs, so that printing time
stamp information shows milliseconds instead of microseconds, as can be
seen on the output `cbmem -t` for the ASRock E350M1 below.
```
0:1st timestamp 515
10:start of ramstage 515 (0)
30:device enumeration 515 (0)
40:device configuration 610 (94)
50:device enable 614 (4)
60:device initialization 624 (9)
70:device setup done 639 (14)
75:cbmem post 844 (205)
80:write tables 844 (0)
90:load payload 849 (4)
15:starting LZMA decompress (ignore for x86) 849 (0)
16:finished LZMA decompress (ignore for x86) 869 (20)
99:selfboot jump 869 (0)
Total Time: 350
```
So scale the return value correctly to megahertz, by dividing it with
1000.
```
0:1st timestamp 515,655
10:start of ramstage 515,655 (0)
30:device enumeration 515,663 (7)
40:device configuration 610,620 (94,957)
50:device enable 614,680 (4,059)
60:device initialization 624,618 (9,938)
70:device setup done 639,553 (14,934)
75:cbmem post 844,707 (205,154)
80:write tables 844,710 (2)
90:load payload 849,532 (4,821)
15:starting LZMA decompress (ignore for x86) 849,655 (123)
16:finished LZMA decompress (ignore for x86) 869,903 (20,247)
99:selfboot jump 869,922 (19)
Total Time: 354,261
```
Change-Id: Iea032c62487c7946b6194a90268755034c6350df
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/14086
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Adds -D / --density option to change the chip density. This is only
implemented for IFD version 1 as I do not have an IFD version 2 to
test this. Density of both chips is changed by default, but a chip
can be selected using -C / --chip.
Change-Id: Iba7affbf6cbefa3147b7b0e019298d905e694716
Signed-off-by: Jan Tatje <jan@jnt.io>
Reviewed-on: https://review.coreboot.org/14032
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We want to start testing builds with additional Kconfig options to try
to get more coverage. This will allow us to enable various options to
test without having to add each individual option to the abuild script.
Change-Id: I9bb2bb6f38589e3bcc1282dc4cad51cf6f5149aa
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14016
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Change the makefile command $(shell pwd) to $(CURDIR) to find the
current directory without going out to the shell.
Change-Id: I4890eba6129630acd2883b92de77308d39949443
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13967
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Add powerpc64le-linux-gnu & nds32le-elf to the instructions as
supported architectures
- Add nds32le-elf as a supported architecture so it will stop warning
when you build it.
Change-Id: Ifcdbc3d082eae5b9b5f8828914e7d2b7ed1f13a4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13961
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add a comment to try to lower possible confusion later if the jenkins
tool builder fails to build a new tool. The URLs for the packages that
are downloaded are checked against known locations so that someone can't
maliciously download a package from somewhere and run it on the build
server. This provides a little bit of security, but could confuse
someone if they don't realize it.
Change-Id: I7858e3d86fc705b480f6792b6adf3d5349580e01
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13955
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We've recently added a jenkins test builder for the coreboot toolchain.
This patch allows what it builds to be controlled from the makefiles
checked into git instead of by a rule on the builder itself.
Change-Id: I65f70bac5ab97ecb27aae93ee370b26a2ab1f9c0
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13954
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Builds with BUILD_TIMELESS=1 shall always give a bit identical output
for stable inputs. This should help verifying that resulting rom files
stay the same across commits that shouldn't change the outcome.
To be useful for builds that rely on 3rdparty/arm-trusted-firmware,
this needs a similar change there.
Change-Id: Ia0a22e3e79fbd0abbd2a9071ecbeef6541787a08
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13412
Tested-by: build bot (Jenkins)
Reviewed-by: Damien Zammit <damien@zamaudio.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
'archive' concatenates files into a single binary blob. Files are
indexed by the base names. See archive.h for the format description.
BUG=chromium:502066
BRANCH=tot
TEST=Tested on Glados
Change-Id: Iea108160e65c8c7bd34c02af824a77cb075ee64b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 21a9ba860f29599ac029f8d49d32399c4e3a73a8
Original-Change-Id: I46b4efb339e3a1e05772ae752f2861026ca09cfc
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311200
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://review.coreboot.org/12925
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Build make with the rest of the toolchain, since the targets using
a Chromium EC need make 4.x
Change-Id: I7efb0c25f605f16c2d9a1e7c4b203f3bcdae671b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13923
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Because the perl error messages go to stderr, we were not catching these
on the build server. If the script has an issue, we want to know
immediately, so change the bash script that calls into the perl lint
tool to pipe these to stdout.
Change-Id: Ieeec9ccbd59177cfd1859a9738a4ee1fab803d28
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13877
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Sandy and Ivy Bridge processors use the same socket, and a mainboard
with the socket can support both types of CPUs. However, they use
different native graphics init code for LVDS and cause a crash if
running the wrong code.
This change detects the CPU type and then selects the right code to
run. It will add some more code in ramstage. It also merges the
{SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS.
Tested on a Lenovo T520 with i7-2630qm and i7-3720qm
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91
Reviewed-on: https://review.coreboot.org/12087
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
The what-jenkins-does build runs distclean when building the utilities.
It doesn't fail the build if distclean fails, but it generates a
scary warning.
Change-Id: Iac90958951976ed326a89ef2b5f2d9f17f9f2d6b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13888
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In Kconfig files, the 'if' and 'endif' statements need to match up. A
file can't start an if statement that's completed in the next file.
Add a check as the files are being parsed to make sure that they match
up correctly.
Change-Id: If51207ea037089ab84c768e5a868270468cf4c4f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13876
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
1. Change the function which integrated one firmware, to the function
which pushes the whole group. Use fw_table as a parameter instead
of using the global table name.
2. Let PSP2 and PSP1 not dependent on the other. It turns out PSP2
can exist without PSP1. For some APU, the PSP directory has to be
put in PSP2 field (ROMSIG 0x14).
3. Reserve 32 more bytes in PSP2 header. It is defined by spec. It
is tested, and it is true.
These above changes are overlapping, hard to split them. Sorry.
Change-Id: I834630d9596d7fb941e2cad5d00ac3af04a537b5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13808
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In e820entry struct, the members are defined using
standard types. This can lead to different structure size
when compiling on 32 bit vs. 64 bit environment. This in turn
will affect the size of the struct linux_params.
Using the fixed width types resolves this issue and ensures
that the size of the structures will have the same length
on both 32 and 64 bit systems.
Change-Id: I1869ff2090365731e79b34950446f1791a083d0f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
When linux is used as payload, the parameters to the kernel are build
when cbfstool includes bzImage into the image. Since not all
parameters are used, the unused will stay uninitialized.
There is a chance, that the uninitialized parameters contain
random values. That in turn can lead to early kernel panic.
To avoid it, initialize all parameters with 0 at the beginning.
The ones that are used will be set up as needed and the rest
will contain 0 for sure. This way, kernel can deal with the
provided parameter list the right way.
Change-Id: Id081c24351ec80375255508378b5e1eba2a92e48
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13874
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Numerous changes have gone in since the last bump, let's increase
the version.
Change-Id: Ie3ae8c24b26bd22b70bc5ddf5c1125b5b1d3a021
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13873
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This should allow the builder to download the packages securely.
Change-Id: If5feeff85bd551cbe08849421197d11cc2432d1e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13867
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When writing to a logfile, the color codes just make things confusing.
The --nocolor option will allow these to not be printed.
Change-Id: I67645aac20b420ac83b828e77e0e50aab88d3d47
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
coreboot's top level Makefile does the same, so let's stay consistent.
Change-Id: I9e995f3ecadd05d6fbfda64b45dee3a9900d9189
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13869
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The current default of 6 lines leaves us with no context
about the actual error:
*** ERROR: 3 warnings encountered, and warnings are errors.
coreboot-gerrit/util/kconfig/Makefile:38: recipe for target 'oldconfig' failed
make[1]: *** [oldconfig] Error 1
make[1]: Leaving directory 'coreboot-gerrit'
Change-Id: I67e7d740e7b3b1c66005dc1bf50557a20bc15428
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12720
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Our GDB doesn't support RISC-V yet, so let's disable it for now
to keep the build from breaking.
Change-Id: Iecc6d97fb16d16410c56965abeea55c67800f220
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13872
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
With this change you can say
$ make DEST=/opt/cross-1.35
to get all of the cross toolchain built and installed to /opt/cross-1.35
Change-Id: Icc3e605c4824bfa2831d030e4ed9dd0331ff722f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13847
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
qemu-power8 wants to tell about itself with XML, and so
we need to build gdb with EXPAT so it can understand XML.
Change-Id: I460e27f883956ed5d54e6070916e2682ee0f7a1b
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13846
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
It was tested with a mini-PCI POST card on a Toshiba
Satellite 1410 laptop with the stock BIOS.
Change-Id: Icdc0860e2c72b17862601c2cc59eaf0f3d8a0e54
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/13763
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This reverts commit 17cb0370a7.
It’s the wrong thing to do, to just disable the warning. The code is
fixed for 32-bit user space now in Change-Id
I85bee25a69c432ef8bb934add7fd2e2e31f03662 (commonlib/lz4_wrapper: Use
correct casts to ensure valid calculations), so enable the warning
again.
Change-Id: I6d1c62c7b4875da8053c25e640c03cedf0ff2916
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/13772
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The builders run perl scripts in taint mode, and some of the checks
that the kconfig lint script were running were tainted, causing
the script to terminate early when running on the servers.
This checks to see if taint mode is enabled, and untaints the path
if it is. All external tools (git & grep) must be in
/bin, /usr/bin, or /usr/local/bin.
This also removes the check for unused kconfig files if taint mode
is enabled.
Change-Id: I8d1e1c32275f759d085759fb5d8a6c85d4f99539
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13751
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
There was a report that xcompile wasn't finding the compilers correctly,
so to aid in future debugging, this adds a parameter to show what
xcompile is doing as it runs.
Run from the command line:
./util/xcompile/xcompile --debug
Change-Id: I779cb3de7b4e3f62a2ef2a6245c3538be518870c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13047
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It seems that the exact behavior of -Wsign-compare changes between GCC
versions... some of them like the commonlib/lz4_wrapper.c code, and some
don't. Since we don't have a well-defined HOSTCC toolchain this slipped
through pre-commit testing. Explicitly silence the warning to ensure
cbfstool still builds on all systems.
Change-Id: I43f951301d3f14ce34dadbe58e885b82d21d6353
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13769
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Some users may wish to run this script using a coreboot image
that does get built in the usual build/ directory, for example
if abuild is used to generate the image.
Change-Id: I7e98780f8b7b57ebbf3babd6a289f0e4fd4103d8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/12489
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This turned out really handy when I tried to build coreboot
for my Chromebox.
These scripts can be used to extract System Agent reference code
and other blobs (e.g. mrc.bin, refcode, VGA option roms) from a
Chrome OS recovery image.
crosfirmware.sh downloads a Chrome OS recovery image from the recovery
image server, unpacks it, extracts the firmware update shell archive,
extracts the firmware images from the shell archive.
To download all Chrome OS firmware images, run
$ ./crosfirmware.sh
To download, e.g. the Panther firmware image, run
$ ./crosfirmware.sh panther
extract_blobs.sh extracts the blobs from a Chrome OS firmware image.
Right now it will produce the ME firmware blob, IFD, VGA option rom,
and mrc.bin
Change-Id: I5fb7e14b10e03e18cd360bc35f1dc92e8ed34e63
Signed-off-by: Joe Pillow <joseph.a.pillow@gmail.com>
Reviewed-on: https://review.coreboot.org/13752
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.
For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).
BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).
Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change I9dd8e4027be21363015cd8df9918610e206afce2 replaces
colons with underscores in paths, to improve compatibility of paths.
This breaks any attempt to interpret the timestamp part of the tree
as a timestamp, so revert the change before doing so.
Change-Id: I0e82e4045120700e9b4fcc8c6e54d761068eaea3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/13766
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The commit description is enough and this avoids hourly updates of the
timestamp by a cron job.
Change-Id: I30e9fcf28caf94edbb816c22bc8fbcb7ab09ae6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13744
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I952a694f645caf9d9726965e39afc09c6fdce0e3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13741
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I1240c215f3d6c3934911c096e2ecbabff175d501
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13740
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If we only need to "combo" two PSP directories into one image,
we can put first address in romsig 0x10 and second one in
romsig 0x14.
If we really need to put three, the 0x14 is the combo directory
which points to multiple level-2 PSP directories.
I guess that two PSP can also use combo directory, with only
one level-2 directory. But nobody seems to do that.
Change-Id: Ic450a846bc04db90a75cd417b6d7104fe2a5b177
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13739
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This changes how we build and use cbfstool:
1. If build/cbfstool exists, use it.
2. Otherwise, try util/cbfstool/cbfstool.
3. As a last resort, build it and clean it when we're done.
Hopefully this will resolve issues people have had with permissions
and reduce overhead of building cbfstool when not necessary.
Change-Id: I5de6581ca765e5a8420b101a5865ddd633334b9c
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/12490
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This is a pretty basic script that can be downloaded with wget to a
ubuntu-based live image, and will set it up so that the board_status
script can connect and run cbmem.
1) Verify that this is being run on a ubuntu-based live image by
checking for the installer.
2) Install and configure the ssh server.
3) Set a root password 'coreboot' so that root can log in.
4) download and build cbmem.
5) find and print the IP(s) that should be used to connect.
Change-Id: I068423c9f5501b156f25371d89559f4a206916b5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13648
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Drop buggy duplicate implementation of intXX handlers
and provide enough glue to use all of YABEL.
Change-Id: I2db77a56a2a991cb84876456dcbb3a843a0d9754
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12117
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
In accordance to change I8bd981c4696c174152cf41caefa6c083650d283a
change autoport as well, as suggested by Vladimir.
Change-Id: I7cdaa779c11fd3f791a3ad213c24d927b5da76b9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13731
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Martin Roth