Turn on WDT support in the devicetree. Turn off CIR support.
Dispense with old commentary.
Change-Id: Icf0c0e12a0ed7ce6c3b6176653e076ffc2ba937e
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5698
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Turns out there are a few minor differences of the LDN's in the AD rev.
of this Fintek chip. 0x07 is in fact the WDT so renaming and remove the
now incorrect io mask. Add missing CIR LDN functionality and touch up
src inline doc.
Change-Id: I440aebad71d62d199d3283dd061933e76b21dda5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5696
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
In order to use the same reference code on S3 resume
that was booted the program needs to be cached. Piggy
back on the ramstage cache to save the loaded reference
code program.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed. Noted locations of reference
code caching and load addresses in console.
Change-Id: I90ceaf5697e8c269c3244370519d4d8a8ee2eb4a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179777
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5013
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Allow ramstage cache to be used from ramstage proper. Also
add a helper function for checking validity of ramstage
cache structure.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: If1f2ad1bcf64504b42e315be243a12432b50e3d5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179775
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5011
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Certain code paths want to know if S3 resume is
happening. However, the current baytrail code doesn't
note S3 resume early enough. Therefore, mark S3
resume just after pattr setup.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I5e5cc285940e4567521afb8483614ce6f813ddde
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179774
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5010
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The inclusion of reg_script_run_on_dev() allows
for removing some of the chained reg_scripts just
to set up the device context. Use the new reg_script
function in those cases.
BUG=None
BRANCH=None
TEST=Built and booted. Didn't see any bizarre dmesg or coreboot
console output.
Change-Id: I3207449424c1efe92186125004d5aea1bb5ba438
Signed-off-by: Aaron Durbin <adurbin@chromium.og>
Reviewed-on: https://chromium-review.googlesource.com/179541
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5009
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
According to the reference code all these registers
need to be set to their best known values.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. Suspend and wake. No idea about
observable impact yet.
Change-Id: I0e31505a165eee1d177e5d726edcfa6947430476
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179749
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5008
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
There's a slew of ports required to initialize baytrail's
perf and power values. Therefore, add the necessary
functionality in the iosf module as well as the reg_script
library.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted.
Change-Id: Id45def82f9b173abeba0e67e4055f21853e62772
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179748
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5007
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The iosf access functions already use some common code,
however there is a duplication for setting up the proper
control register for port and opcode. Introduce macros
to remove this verbosity.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. Suspend and wake.
Change-Id: I5bad7e2a11fa8e8bd4a3d7fa53d917b2565644f8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179747
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5006
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The reg_script library has proven to be useful. It's
also shown that many scripts operate on devices. However,
certain code paths run the same script on multiple,
but different, devices. In order to make that easier
introduce reg_script_run_on_dev() which takes a device
as a parameter. That way, chained reg_scripts are not
scrictly needed to run the same script on multiple devices.
BUG=None
BRANCH=None
TEST=Built.
Change-Id: I273499af4d303ebd7dc19e9b635ca23cf9bb2225
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179540
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5005
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This adds the option to put LPSS and SCC devices into ACPI mode
by saving their BAR0 and BAR1 base addresses in a new device
NVS structure that is placed at offset 0x1000 within the global
NVS table.
The Chrome NVS strcture is padded out to 0xf00 bytes so there
is a clean offset to work with as it will need to be used by
depthcharge to know what addresses devices live at.
A few ACPI Mode IRQs are fixed up, DMA1 and DMA2 are swapped and
the EMMC 4.5 IRQ is changed to 44.
New ACPI code is provided to instantiate the LPSS and SCC devices
with the magic HID values from Intel so the kernel drivers can
locate and use them.
The default is still for devices to be in PCI mode so this does
not have any real effect without it being enabled in the mainboard
devicetree.
Note: this needs the updated IASL compiler which is in the CQ now
because it uses the FixedDMA() ACPI operator.
BUG=chrome-os-partner:23505,chrome-os-partner:24380
CQ-DEPEND=CL:179459,CL:179364
BRANCH=none
TEST=manual tests on rambi device:
1) build and boot with devices still in PCI mode and ensure that
nothing is changed
2) enable lpss_acpi_mode and see I2C devices detected by the kernel
in ACPI mode. Note that by itself this breaks trackpad probing so
that will need to be implemented before it is enabled.
3) enable scc_acpi_mode and see EMMC and SDCard devices detected by
the kernel in ACPI mode. Note that this breaks depthcharge use of
the EMMC because it is not longer discoverable as a PCI device.
Change-Id: I2a007f3c4e0b06ace5172a15c696a8eaad41ed73
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179481
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5004
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The LLVM integrated assembler has some deficiencies in support for
building AGESA. See:
LLVM PR18918 - [RFE]: Missing altmacro support in integrated assembler
Disable llvm-mc for the moment until these have been addressed fully
upstream.
Change-Id: Id4131d1de04d01c0bec284f976f0ba9662b950ab
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5711
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
'prove' that clang is supported (to some extent).
Change-Id: I181f4910ba64ab9746e7ac94aa79da23cdd41dad
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5709
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Payloads using Kconfig get confused by coreboot Kconfig
configuration in environment variables. Prune them.
Change-Id: I63da2af0a15dca35d70cd65b2f74a1564aab9483
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5710
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
CPU - fsp_model_206ax:
- Remove Kconfig options and mark this as using the FSP.
- Use shared FSP cache_as_ram.inc file
Mainboard - intel/cougar_canyon2:
- Update to use the shared FSP header file.
- Modify to call copy_and_run() directly instead of returning to
cache_as_ram.inc.
Northbridge - fsp_sandybridge:
- remove mrccache, fsp_util.[ch]
- add fsp/chipset_fsp_util.[ch] with chipset specific FSP bits.
- Update to use the shared FSP header file.
These changes were validated with FSP:
CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd
SHA256: e1bbd614058675636ee45f8dc1a6dbf0e818bcdb32318b7f8d8b6ac0ce730801
MD5: 24965382fbb832f7b184d3f24157abda
Change-Id: Ibc52a78312c2fcbd1e632bc2484e4379a4f057d4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5636
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
- Move the non chipset-specific fsp pieces out of the chipset into a
shared area. This is used by northbridge / southbrige / SOC code. It
pulls in pieces from Kconfig, Makefile and FSP specific code.
- Enabled in the CPU code with a Kconfig "select PLATFORM_USES_FSP"
Change-Id: I7ffa934c1df09b71d48a876a56e3b888685870b8
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5635
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Following the same reasoning as commit
d3043313a9 superio/fintek/f81865f: Avoid
.c includes
Clean up the early_serial #include directives in mainboard/romstage code.
Change-Id: Ia6ed36c8517a95b651fefdd855eec0ec91d73187
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5439
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Overriding global config entries in mainboard directory Kconfig
files often raise unnecessary warnings. Squelch some of those.
Change-Id: Ib5127672ae068670028aa25c8ccb5366277622f2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5699
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
For bzImages the trampoline segment is added unconditionally.
However, that segment wasn't properly being accounted for.
Explicitly add the trampoline segments like the other ones.
Change-Id: I74f6fcc2a65615bb87578a8a3a76cecf858fe856
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5702
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This enables the DPTF framework, but it doesn't do much
without some sort of kernel+user components to drive it.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF
Change-Id: Icb632a6e70c3912bbdfa6ef3f5c87cd79d2b8a3a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179480
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5003
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This is not complete yet but it compiles and doesn't cause
any issues by itself. It is tied into the EC pretty closely
so that is part of the same commit.
Once we have more of the EC support done it will need some
more work to make use of those new interfaces properly.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF
Change-Id: I4b27e38baae18627a275488d77944208950b98bd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179459
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5002
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
These are the values that are seen with VBIOS and
may need tweaked for derivative panels.
BUG=chrome-os-partner:24367
BRANCH=none
TEST=boot on rambi in normal mode and see the panel come up
Change-Id: Ie3120ab3c5298135626e8534d3954acd263dc74b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179365
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5001
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
These need to be set before the kernel will work without
running the VBIOS option rom.
Also necessary is setting the PP_CONTROL register with
the EDP_FORCE_VDD bit.
BUG=chrome-os-partner:24367
BRANCH=none
TEST=boot on rambi in normal mode and see the panel come up
Change-Id: I495f818d581d08b80db11785fe28b601ec956b3b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179364
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5000
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Now that the SD card controller is limited to the SD card
2.0 spec it's possible to use 20K pulls for the pads.
BUG=chrome-os-partner:24423
BUG=chrome-os-partner:24312
BRANCH=None
TEST=Built and booted. Able to dd to/from /dev/mmcblk1 without
any errors.
Change-Id: Id5396c55330a84bf7a09d227507d2bfcde66a1a4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179423
Reviewed-on: http://review.coreboot.org/4999
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The rambi board can only meet the SD card 2.0 specification.
Therefore, the controller capabilities need to be overridden
to match.
BUG=chrome-os-partner:24423
BRANCH=None
TEST=Built and booted. /sys/kernel/debug/mmc0/ios shows
high speed as maximum timing as well as 3.3V signal voltage.
Change-Id: Ib3824800852376e0f15a70584917d6692087ccfe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179415
Reviewed-on: http://review.coreboot.org/4998
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The SD card controller can have the capabilities it supports
to be overridden. Add two optional fields to the chip structure
to allow the mainboard to override the SD card controller
capabilities.
BUG=chrome-os-partner:24423
BRANCH=None
TEST=Built and booted. Noted capabilities override console output.
Change-Id: Ibfef8f765b35eeec6da969dd05f5484f8672a7b9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179414
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4997
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The VDAT data was off by 2 bytes when reading it from the
kernel. The reason is that the header did not line up
correctly with actual ACPI code.
BUG=chrome-os-partner:24440
BRANCH=None
TEST=crossystem devsw_cur now returns either 0 or 1 depending
on state.
Change-Id: Ie78599f29cd5daf7da98db5e37fa276d24339f6a
Signed-off-by: Aaron durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179372
Reviewed-on: http://review.coreboot.org/4996
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Bay Trail has 3 banks of gpios. Therefore, in order to
properly identify a gpio the specific bank number as well
as the GPIO within that bank is needed. The SPI
write-protect GPIO is GPIO 6 within the SUS bank (offset
0x2000).
BUG=chrome-os-partner:24324
BUG=chrome-os-partner:24408
BRANCH=None
TEST=Built and booted. Looked at GPIO sysfs in the
chromeos_acpi directory.
Change-Id: Ic51b5abe3bacf6cf9b6a90cf666f1a63b098a0e3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179195
Reviewed-on: http://review.coreboot.org/4995
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The LPE audio device needs 1MiB of memory for its firmware.
It also has a requirement that the memory needs to be on a
512MiB boundary. Just take 1MiB @ 512MiB for the LPE device.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and analyzed console logs for resources. Also interrogated
registres within the kernel.
Change-Id: I4d9ad5c7b5a2f3eb627b30528d738289278b3a7b
Reviewed-on: https://chromium-review.googlesource.com/179192
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4994
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
On Ubuntu /bin/sh is symlinked to /bin/dash. The
current toolchain.inc was doing some things that
dash doesn't support. Make the shell callouts more
conforming to the POSIX sh standard.
Change-Id: I26b6b82b8d6158c9029e8be9e7c088ca9e207f21
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5701
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Leave it under BOOTMODE_STRAPS to control whether these have
any functional meaning on the build.
Change-Id: Ieb59aa7ab4b1e8da6a1002e7a8e5462eb7988d35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5643
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This feature is no longer specific to ChromeOS builds.
Change-Id: If27d4dc7caff8a551b5b325cdebdd05c079ec921
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5641
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Provision the configuration of the Fintek F71869AD Hardware Monitor's
configuration by way of devicetree.cb. Make use of this in the
jetway/nf81-t56n-lf board to properly control fan's.
Change-Id: Ic25b29d1b7a9145e0e209b490b25a2cbc46cb75c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5580
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Facilitate for the configuration of so called "Multi-function Select
Registers" with devicetree.cb in ramstage.
Make use of this new functionality in, mainboard/jetway/nf81-t56n-lf to
correctly configure the Fintek's multiplexed GPIO pins to be in AMD TSI
mode. This allows the Fintek to correctly talk to the Southbridge over
the SMBus for CPU temperature data as to control fans and so on.
Change-Id: I80abcd8b767fc4b22d00d1384ce4ef89fe837e3d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5576
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
romstage reports a completely unintelligible printf of "error level:",
fix this and document meaning of the return values in source.
Change-Id: Ia2fb9a6206e08822f6c2f62b69bf22cdae2ba819
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5465
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The Linux kernel driver cannot handle Baytrail legacy GPIOs, so make the
default input GPIO type MMIO.
BUG=chrome-os-partner:24408
TEST=Manual on Rambi. Run "echo 169 > /sys/class/gpio/export; cat
/sys/class/gpio/gpio169/value", verify GPIO value changes based upon mic
jack status.
BRANCH=None
Change-Id: I27870ce8b7ecae9228e06e48c8759409c824c2eb
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179169
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4992
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Strengthen PUs on all eMMC pins to fix problems with eMMC not coming up
on certain boards.
BUG=chrome-os-partner:24353
TEST=Manual. Burn FW on board that previously failed to boot eMMC,
verify chromeos can now install + boot from eMMC.
BRANCH=none
Change-Id: I7a9742968b8b8c2c42285ffc21de46aed9c87fb7
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178917
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4991
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Rambi 1.5 boards use the native SD card controller on baytrail.
Therefore, enable those signals. The CLK, D*, and CMD pins use
2K pulls as these were shown to not exhibit any errors when
doing reads or writes to a DDR50 sd card.
Note that if a servo is connected on needs to enable the
sd_vref_sel rail to pp1800 as this causes issues with card
detect if it is not set to pp1800.
BUG=chrome-os-partner:24312
BRANCH=None
TEST=Built and booted. Tested sd card read and write works in kernel.
Also noted that write protect detection works as well.
Change-Id: I520e2808acbd8494534fcb710411dbc0e12fc874
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178961
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4990
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The new IASL is complaining about the PCI memory region not
having consistent base/end/length values because they are
placeholder that are fixed up in the method before returning.
Put in some more valid placeholder values to make it happy.
BUG=chromium:311294
BRANCH=none
TEST=build and boot with IASL 20130117 on rambi
Change-Id: I0e21adcce43deb14d3c2c45787ff8c9efc357c2f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178864
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4988
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Add device tree option to determine if the LPE
audio codec has a platform clock signal connected
to it from the SoC. If a frequency is selected the
platform clock number is used to enable the
clock.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and booted rambi with 25MHz option. Probed pin
to audio codec. Noted 25MHz clock.
Change-Id: I67d0d034f30ae1c7ee8269c0aea43e8c92ff868c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178780
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4986
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
There are 3 banks of GPIOs that need to be described
with specific _UID and memory/interrupt values.
BUG=chrome-os-partner:24314
BRANCH=none
TEST=build and boot on rambi, check for probed driver:
gpiochip_find_base: found new base at 154
gpiochip_add: registered GPIOs 154 to 255 on device: INT33FC:00
gpiochip_find_base: found new base at 126
gpiochip_add: registered GPIOs 126 to 153 on device: INT33FC:01
gpiochip_find_base: found new base at 82
gpiochip_add: registered GPIOs 82 to 125 on device: INT33FC:02
fed0c000-fed0cfff : INT33FC:00
fed0c000-fed0cfff : INT33FC:00
fed0d000-fed0dfff : INT33FC:01
fed0d000-fed0dfff : INT33FC:01
fed0e000-fed0efff : INT33FC:02
fed0e000-fed0efff : INT33FC:02
Change-Id: I9619e2af4e1ccdf3d7b2e4ae280aadf22e278aeb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178601
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4985
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
With microcode 31E MWAIT 0x51 is now C6NS and 0x52 is now C6FS.
BUG=chrome-os-partner:23505
BRANCH=none
TEST=build and boot on rambi, check that C1/C2/C3 are all used now
Change-Id: I8528d808f4082c85d90e2b57747d9f2e2d982b85
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178461
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4984
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Edward O'Callaghan