Zero the framebuffer structure so if it is not filled in (either if
no display is present or if there is an error) then it does not
provide garbage data to the payload.
This was noticed when booting a board without a display attached as
the payload wrote to the framebuffer at a random address.
With this change the payload can properly handle the case where a
display is not attached and not corrupt memory.
Change-Id: I8114d88496cd2a4f2e7f07f377fe76f3180a7f40
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
In the D0 and D3 ACPI methods use word access to the PME status and
control register. This brings the code inline with the Intel reference
code and matches how the kernel handles access to this register.
BUG=b:35587084
BRANCH=eve
TEST=manual stress testing of D0<>D3 transition across multiple devices
Change-Id: I53f7465d6ad5da1780a5641ff52056445ebaca8b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
For the skylake/kabylake generation of PCH there is an ACPI workaround
for emmc/sd power state that involves disabling and re-enabling dynamic
clock gating after enabling power to the controller, before setting the
power state to D0.
Under certain conditions we have observed that the controller is not
powered and ready by the time the kernel attempts to read the PME
control and status register and so the system will hang while attempting
to read PCI config register 0x84.
To ensure that the controller is ready add a 2ms delay after re-enabling
dynamic clock gating and before setting the power state to D0.
This issue has been observed on eMMC, but the same workaround exists for
the SD card interface so the same delay is added there.
BUG=b:35587084
BRANCH=eve
TEST=manual stress testing of D0<>D3 transition across many devices
shows no hard hang after 2 days.
Change-Id: If0f0323cf5437c54c907c332937b5de9dda2d8f6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update blobs pointer to bring in the AGESA.bin changes for
amd/00670F00/FP4 and amd/00670F00/FT4.
Change-Id: I739124090e41edaf76210cda6189b2c7545cdf58
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a Kconfig value to enable building libpayload with the 586 compiler.
Update the cross compiler script to add the Kconfig value name that is
used when libpayload builds.
The Quark SOC does not support some of the instructions generated with
the 686 compiler (e.g. CMOV). Success occurs when
payloads/libpayload/build/config.h indicates that
CONFIG_LP_USE_MARCH_586=1.
TEST=Build and run on Galileo Gen2.
Change-Id: I04907e9a38ee139bae2e8b227821f54614707c25
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/20322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Also check for the presence of the given commands or "gcc", "cc" in this
order if $CC is empty. To untangle the given compilers from boostrapped
ones, introduce hostcc() and hostcxx() functions that return the respec-
tive compilers to be used.
Change-Id: Ic947be53eec25331173ac82ed742017ca3fbf83c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Most of these functions go unused most of the time, but in order
to not keep several copies around, let's make sure we are using
the same file everywhere first.
Change-Id: Ie121e67f3663410fd2860b7d619e8a679c57caba
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add the default configuration file for the Galileo board. The Quark SOC
requires building libpayload with march=i586.
TEST=Build and run on Galileo Gen2
Change-Id: Ifd4b533feacbab6f0d357e13d8cebb64bc1c18c6
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/20323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Correct all checkpatch errors but leave two errors in place
that are caused by AMD typing.
Change-Id: I9daa374da76ff991de72d16bad0e8b586aa95525
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/20318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Switch Garnenia mainboard to single soc/ directory structure.
Change-Id: I095804d603bcccf324d3244965081a9dccba62ae
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Copy northbridge files from northbridge/amd/pi/00670F00
to soc/amd/stoneyridge and soc/amd/common.
Changes:
- update chip_ops and device_ops
- remove multi-node support
- clean up Kconfig and Makefile
Change-Id: Ie86b4d744900f23502068517ece5bcea6c128993
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Copy cpu/amd/pi/00670F00 to soc/amd/stoneyridge and
soc/amd/common. This is the second patch in the process of
converting Stoney Ridge to soc/.
Changes:
- update Kconfig and Makefiles
- update vendorcode/amd for new soc/ path
Change-Id: I8b6b1991372c2c6a02709777a73615a86e78ac26
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This
is the first of a series of patches to migrate Stoney Ridge
support from cpu, northbridge, and southbridge to soc/
Changes:
- add soc/amd/stoneyridge and soc/amd/common
- remove all other Husdon versions
- update include paths, etc
- clean up Kconfig and Makefile
- create chip.c to contain chip_ops
Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This patch updates the coreboot DDR Settings to match the configuration
used by ARM-Trusted-Firmware.
Change-Id: I34bc2950a9708ac89a5637bf682551e03d993fcc
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-on: https://review.coreboot.org/20304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
- Change from 'which' to 'command -v'. 'which' is not a posix command.
Change-Id: Icdf18e7e496447157554b8e61b1528f03456536d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20230
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
clang, like gcc, needs a compiler runtime library. Unlike gcc, it can
use either its own runtime library (compiler-rt), or gcc's version
(libgcc). Also unlike gcc, the version of clang that is currently part
of our reference toolchain does not provide the necessary versions of
compiler-rt for all platforms we support. Hence, for now, use libgcc
even on clang builds. This patch allows switching between the two, but
switching to compiler-rt will break clang builds, unless someone fixes
our reference toolchain to provide libclang_rt.builtins-${ARCH}.a for
each of our supported platforms.
Change-Id: I5001a4b62ed34df19312f980b927ced8cbaf07db
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
As per latest BWG, ucode reloading should be done at the end
of Mp Init, i.e., after PRMRR and other features are enabled.
No reloading specifically after SMM Relocation is required.
As, in the Common CPU MP Init code, we are already doing a
uCode load at the end of MP Init Feature Programming, hence,
the uCode loading after SMM relocation can be removed.
Change-Id: Ib1957c5fe5a8c83bb20b978a9841670b0c3e8846
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch contains State Machine callbacks init_cpus()
and post_cpu_init().
Also, it has the SOC call for CPU feature programming.
Change-Id: I5b20d413c85bf7ec6ed89b4cdf1770c33507236b
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It does not work to enable the LPC range in the function
mainboard_init() because the LPC bus driver closes the range during PCI
enumeration again. For this reason, enabling decoding of the address
range for COM 3 will be done at a later point in time -
mainboard_final().
Change-Id: I452bca4e430b1ea75e4a327591da84500491fe84
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/20295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
With enabled XDCI support we are not able to use USB port 0 over XHCI
driver. For this reason, we disable XDCI into devicetree.cb.
Change-Id: I1ed721d9ffd44a920a6f1f16855d5b7ceb1b17c5
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/20296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
That's what the option is called in the help text. Not
sure where the divergence came from, so let's fix it.
Change-Id: I621aa203da2d314b93de665dbdadbe4a43725375
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
With the do while loop, it can be avoided do use an infinite loop with a
break condition inside.
Change-Id: I030f6782ad618b55112a2f0bac8dda08b497a9f1
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/20269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes improper dram frequency being displayed in sandy bridge
native raminit.
Change-Id: I1fe4e4331f45ce1c21113c039b8433252326293d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
On boards that are able to take two DIMMs per channel the
command rate should be 2T. It is possible to use 1T with
load reduced "1T" DIMMs, but it's not clear how to detect
those DIMMs. Raminit might fail for those who do not have
such DIMMS installed.
Hardcode command rate of 2T to make sure raminit works on
dual DIMM per channel boards (currently only desktop boards).
The command rate of 1T is still tested if only 1 DIMM per
channel is present.
Will decrease performance on quad slot mainboards, if two DIMMs
are installed in one channel and previously 1T have been selected.
Tested on ASRock B75 Pro3-M.
Change-Id: I029d01092fd0e11390cebcd94ca6f23bf0ee2cab
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Maybe we could go on, but cbmem_add() failing is a very bad sign.
Should fix coverity CID 1376384 (Null pointer dereferences
(NULL_RETURNS)).
Change-Id: I330cee6db3540c6a9c408d56da43105de5d075f7
Found-by: Coverity Scan #1376384
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20280
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix up for 1b5eda0 (arch/x86/smbios: Fix undefined behavior) which
introduced the variable `tmp` and used it out of scope. Should fix
coverity CID 1376385 (Memory - illegal accesses (RETURN_LOCAL)).
Change-Id: I8d4f664fc54faf6beb432b939dda4ddf93cf5d3e
Found-by: Coverity Scan #1376385
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ryan Salsamendi <rsalsamendi@hotmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bifferboard was the only board that used this chip, and it has now
been removed. Removing the chip as well. If there is desire to
continue work on the board, it can be found in the 4.6 branch.
Change-Id: I33a1e713cdfea47abce71b79f0a9c93562c96d12
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This board can't be found to be tested, and compiles romstage with
romcc. If desired, it can be continued in the 4.6 branch.
Change-Id: I4826c277bbb444c2f0573729d76cd492ade95b4c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
rdrand64() is not clang friendly. Actually it looks like the
function is incorrect on 32bit x86 for all compilers including
gcc, but gcc won't care because the function is never called on
x86:
src/arch/x86/rdrand.c:51:15: error: invalid output size for constraint '=a'
: "=a" (*rand), "=qm" (carry));
^
1 error generated.
Guard the code correctly if ENV_X86_64 is not set.
Change-Id: Ia565897f5e4caaaccfcb02cf1245b150272dff68
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use the existing macros for CR0 to set the flags in the
SIPI vector code.
Change-Id: Iad231b7611b613512fd000a7013175e91542ac10
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Use the existing macros for CR0 to set the flags in the
SMM stub.
Change-Id: I0f02fd6b0c14cee35ec33be2cac51057d18b82c0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20242
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
For sizes and dimensions use size_t. For pointer casts
use uintptr_t. Also, use the ALIGN_UP macro instead of
open coding the operation.
Change-Id: Id28968e60e51f46662c37249277454998afd5c0d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20241
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The vboot code tries reading rollback protection indices from the TPM,
and if the attempt to read returns TPM_E_BADINDEX, it decides that the
TPM has not yet been initialized for the Chromebook use, and needs to
be taken through the factory initialization sequence.
TPM_E_BADINDEX is an internal representation of the TPM error 0x28b,
generated on attempts to read a non existing NVMEM space.
If the space exists, but has never been written the TPM returns error
0x14a. This condition (the space exists but not written) could happen
if the previous factory initialization attempt was interrupted right
after the space was created.
Let's map this error to the same internal representation
(TPM_E_BADINDEX) so that the Chrome OS device could recover when this
condition occurs.
BRANCH=reef, gru
BUG=b:37443842
TEST=verified that the Pyro device stuck in TPM error state recovered
when this patch was applied.
Change-Id: I6ff976c839efcd23ae26cef3ee428e7ae02e68f8
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/20299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Drop Edward's cfe patch because it has been implemented by
upstream clang differently. Instead of
$ clang --print-librt-file-name
the right way to get ahold of the compiler-rt builtin library is
$ clang -rtlib=compiler-rt --print-libgcc-file-name
Change-Id: I8aac5256da5bfb6f7bebeff0959f16b53867c581
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Newer versions of clang will need newer versions of CMake (at least
3.4.3) to compile. This patch will enable us to switch to clang 4.0.
Change-Id: I6c91163ce0efd4eb2410cdb433de8be23d510ecd
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
SMI code is very similar across Intel platforms. Move this code to
common/block/smi to allow it to be shared between platforms instead
of duplicating the code for each platform. smihandler.h has already
been made common so all it will contain is name changes and a move
to the common block location. Due to moving smihandler code, APL
changes are bundled here to show this change.
Change-Id: I599358f23d5de7564ef1ca414bccd54cebab5a4c
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/19392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add SPI driver code for the legacy SPI flash controller. Enable erase
and write support allowing coreboot to save non-volatile data into
the SPI flash.
TEST=Build and run on Galileo Gen2.
Change-Id: I8f38c955d7c42a1e58728c728d0cecc36556de5c
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/20231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This patch controls the camera devices power through ACPI power resource.
* Add Opregions for PMIC,
* TI_PMIC_POWER_OPREGION
* TI_PMIC_VR_VAL_OPREGION
* TI_PMIC_CLK_OPREGION
* TI_PMIC_CLK_FREQ_OPREGION
* Add power resources for sensors and VCM,
* OVTH for CAM0
* OVFI for CAM1
* VCMP for VCM
* Implement _ON and _OFF methods for sensor and VCM module's power on
and power off sequences.
BUG=b:38326541
BRANCH=none
TEST=Build and boot poppy. Dump and verify that the generated DSDT table
has the required entries.
Change-Id: I87cd0508ed5ed922211a51f43ee96b6f44cf673d
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/20054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Bind the camera sensor and CIO2 devices through the ports and endpoints
configuration available in _DSD ACPI object.
* Port represents an interface in a device.
* Endpoint represents a connection to that interface.
BUG=b:38326541
BRANCH=none
TEST=Build and boot poppy. Dump and verify that the generated DSDT table
has the required entries.
Change-Id: I6d822165bb9a0cd6f7d4cdcb36333887953110a3
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/20053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Enable RT8168_GET_MAC_FROM_VPD in fizz Kconfig.
BUG=b:62090148, b:35775024
BRANCH=None
TEST=Boot to kernel. Insert mac address into VPD
vpd -s ethernet_mac=<address>
reboot the system.
Ensure we have ip address and corresponding mac
address with ifconfig.
Ensure ethernet controller shows up with lspci.
Change-Id: I00f63dcb56a2c9a4600c8461bc94e06ec5ab2d81
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/20232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If RT8168_GET_MAC_FROM_VPD selected, use r8168
driver with some slight mods to check the VPD
for a mac address. Otherwise, check for mac
address in cbfs. Use default mac address if
cannot find one.
BUG=b:62090148, b:35775024
BRANCH=None
TEST=Boot to kernel. Insert mac address into VPD
vpd -s ethernet_mac=<address>
reboot the system.
Ensure we have ip address and corresponding mac
address with ifconfig.
Ensure ethernet controller shows up with lspci.
Change-Id: I7ff29de2c4c3635dc786686cc071c68d51b0f975
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/20008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
By default disabled. Will need to add
FIZZ_USE_SPI_TPM config to enable.
BUG=b:62456589, b:35775024
BRANCH=None
TEST=Reboot and ensure that TPM works in verstage
CQ-DEPEND=CL:530184
Change-Id: I14ce73a1c3745c996b79c4d4758ca744e63a46b4
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/20134
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Duncan Laurie