In order to display a "update in progress" screen on devices with
a slow EC or PD chip it may be necessary to also load the VGA
Option ROM when doing EC software sync.
This adds config options for VBOOT_EC_SLOW_UPDATE which simply sets
a flag in the input parameters that is already handled by vboot.
It also adds a config option for VBOOT_OPROM_MATTERS which is a bit
more tricky in that it sets a flag in input parameters, but also
needs to keep track of the option rom being loaded and pass that
flag into VbInit as well.
Since VbInit will clear the NV bit for option rom loaded the check
that is done in vboot_wants_oprom() needs to first compare against
the vboot handoff copy of the input flags.
BUG=chrome-os-partner:32379
BRANCH=samus
TEST=manual testing:
1) in normal mode, with EC/PD in RW, ensure that they are rebooted
to RO and the VGA Option ROM is loaded and the wait screen is
displayed, and then the system is rebooted at the end and the
VGA Option ROM is not loaded.
2) same as #1 with EC/PD in RO already, same result
3) same as #1 with system in developer mode, same result except
there is no reboot at the end of software sync
4) same as #1 with system in developer mode and EC/PD in RO,
ensure that there is no extra reboot at the beginning or end of
software sync.
Original-Change-Id: Ic2b34bf9e7c6cc5498413fa1b8dff6e6207c9d0a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223831
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 7d7aa89238efb5081885f9386c8e872fc96f573f)
Change-Id: Ib7fb24e6e80e1f7e836bc62246ab9b3e056fd73d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8887
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
this change makes coreboot initialize kernel space and backup space in the tpm
when no firmware space is found in the tpm.
BUG=chrome-os-partner:32410
TEST=Forced factory initialization and verified it went through without errors.
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I777e3cb7004870c769163827543c83665d3732b9
Original-Reviewed-on: https://chromium-review.googlesource.com/220412
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit d8c0c407bf0fed60d76441ada7bedd36f6fc3a38)
Change-Id: Icc3779125262b4499e47781991ebbf584abf074a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change makes prevent execution from falling through to unverified
code when hard_reset is not implemented. it also includes a few touch-ups.
BUG=None
TEST=Booted Veyron Pinky. Verified firmware selection in the log.
BRANCH=None
Original-Change-Id: I9b02ab766172a62c98b434c29f310bc4a44f342d
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219625
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit d1f5207d83d2247b55f2bb9d02ac843305fc3ded)
Change-Id: I99dd5a2ca3a5369accb14408ea9d266bf60e7132
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8884
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With CONFIG_RETURN_FROM_VERSTAGE false, the verstage loads the romstage over
the bootblock, then exits to the romstage. this is necessary for some SOC
(e.g. tegra124) which runs the bootblock on a different architecture.
With CONFIG_RETURN_FROM_VERSTAGE true, the verstage returns to the bootblock.
Then, the bootblock loads the romstage over the verstage and exits to the
romstage. this is probably necessary for some SOC (e.g. rockchip) which does not
have SRAM big enough to fit the verstage and the romstage at the same time.
BUG=none
TEST=Built Blaze with USE=+/-vboot2. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I673945c5e21afc800d523fbb25d49fdc83693544
Original-Reviewed-on: https://chromium-review.googlesource.com/212365
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Note: This purposefully is probably broken in vendorcode/google/chromeos
as I'm just trying to set a base for dropping more patches in. The vboot
paths will have to change from how they are currently constructed.
(cherry picked from commit 4fa17395113d86445660091413ecb005485f8014)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9117434ce99695f9b7021a06196d864f180df5c9
Reviewed-on: http://review.coreboot.org/8881
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
this change reduces the code duplication of the bootblock and the romstages for
Nyans.
BUG=none
TEST=Built Nyan, Big, and Blaze. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: dnojiri@chromium.org (Daisuke Nojiri)
Original-Change-Id: Ieb9dac3b061a2cf46c63afb2f31eb67ab391ea1a
Original-Reviewed-on: https://chromium-review.googlesource.com/214050
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit f3413d39458f03895fe4963a41285f71d81bcf5f)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I912f63b12321aa26a7add302fc8a6c4e607330ef
Reviewed-on: http://review.coreboot.org/8880
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This introduces a new kconfig variable to select the VBNV backing
store explicitly instead of inferring it from CPU/SoC architecture.
x86 platforms have historically relied only on CMOS to store VBNV
variables, while ARM-based platforms have traditionally relied on
the EC. Neither of those solutions are going to scale well into
the future if/when CMOS disappears and we make ARM-based systems
without an EC.
BUG=chrome-os-partner:29546
BRANCH=none
TEST=compiled for nyan_blaze and samus
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I4a8dadfb6bb666baf1ed4bec98b29c145dc4a1e7
Original-Reviewed-on: https://chromium-review.googlesource.com/213877
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
(cherry picked from commit d088fc71b2e2b45e826d3dedb8e536ad58b8d296)
Change-Id: Iea325a8c4d07055143e993d89b827f86b8312330
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8777
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
rmodules ccopts contain information about specific arch like armv4,v7. Hence, it
is important to include them in VBOOT_CFLAGS
BUG=None
BRANCH=None
TEST=Compiles correctly for armv4 in rush
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Id:
Original-Change-Id: I8f5509f753e28046678c3782d6f0b6210559f798
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209979
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit ca9f2f86ff1bc445abf5f97f61c04b6eccbd3e25)
Change-Id: I6cd7c47f33cf897d8ee96e7154222b3bfbe5221f
Reviewed-on: http://review.coreboot.org/8775
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
In order to more cleanly apply upcoming changes some files
will need to do a dance.
Change-Id: Ib50670743c10221785447490190ecdbff8c764fe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8654
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This code ports antirollback module and tpm library from platform/vboot_reference.
names are modified to conform to coreboot's style.
The rollback_index module is split in a bottom half and top half. The top half
contains generic code which hides the underlying storage implementation.
The bottom half implements the storage abstraction.
With this change, the bottom half is moved to coreboot, while the top half stays
in vboot_reference.
TEST=Built with USE=+/-vboot2 for Blaze. Built Samus, Link.
BUG=none
Branch=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I77e3ae1a029e09d3cdefe8fd297a3b432bbb9e9e
Original-Reviewed-on: https://chromium-review.googlesource.com/206065
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
(cherry picked from commit 6b66140ac979a991237bf1fe25e0a55244a406d0)
Change-Id: Ia3b8f27d6b1c2055e898ce716c4a93782792599c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8615
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
If a TD is comprised of one or more Normal TRBs and terminated with an
Event Data TRB, then the transition to the Idle state (and associated
Stream state save) could occur after all the data for the TD has been
moved (e.g. after Transfer Event TRBs have been executed), but before the
Event Data TRB is executed. Under these conditions, the execution of the
Event Data TRB is necessary to complete the TD, otherwise it does not
occur until the next time the Stream is scheduled. This could lead to the
lock up.
The Evaluate Next TRB(ENT) flag provides a means of forcing the execution
of a terminating Event Data TRB. Setting ENT flag in last Normal TRB makes
the xHC to evaluate the Even Data TRB.
BUG=chrome-os-partner:29375
TEST=Verified kernel boot-up on storm from previously failing USB stick.
USB stick model: Sandisk Ultra USB 3.0 Pen Drive 32 GB
Strontium Jet USB 3.0 Pen Drive 32 GB
Change-Id: I092e2109c55c2274239c493cb67b47d730304ed2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7eefb3b2858c841165ae839d349d2a0be50fbcc8
Original-Change-Id: I4e123577ec5a5996d87d2fc52cb6cf5c571c9fae
Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220123
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/8736
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If EHCI controller has TT (Transaction Translator) support in
root-hub, then we need to keep control over this controller when
USB keyboard (low-speed device) is connected to root-hub port.
Need to add "CONFIG_LP_USB_EHCI_HOSTPC_ROOT_HUB_TT=y" to config file
(e.g. payloads/libpayload/configs/config.nyan_big) to support this
feature.
BUG=chrome-os-partner:32355
TEST=Tested on nyan_big platform.
Press ESC+REFRESH+POWER keys on internal keyboard to power up.
Press Left Arrow or Right Arrow on USB keyboard to switch between
"English" and "Default Locale" in coreboot UI. Or unplug and plug
in device and try again.
Root hub <- low-speed USB keyboard
Root hub <- full-speed hub <- low-speed USB keyboard
Root hub <- high-speed hub <- low-speed USB keyboard
Change-Id: Iaa2823f64c8769fc808ee7a316c378f18f004e63
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4ad57fd673d6dc8814fe99a4ac420566bb17e77b
Original-Change-Id: Id86a289bc587653b85227c1d50f7a4f476f37983
Original-Signed-off-by: Jim Lin <jilin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220125
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8737
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These boards are supposed to be able to determine the board ID at run
time based on GPIO settings.
BUG=chrome-os-partner:30489
TEST=verified that all boards build. Checked that storm proto0 reports
board ID of 0 on the console
Original-Change-Id: Iadd758a799d69e1e34579d7d495378856b64c45b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210119
(cherry picked from commit f4d41ddf906c1bf0d10da38011998fa0a630c332)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0d5f94d3428157a70f0a9d711b57432e3f796733
Reviewed-on: http://review.coreboot.org/8722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
storm uses three GPIOs in tertiary mode, such that proto0 returns
value of 8 when the GPIOs are interpreted as a single tertiary number.
Adjust the calculated value to return board ID of 0 on proto0, and
monotonously incrementing values on newer boards.
BUG=chrome-os-partner:30489
TEST=when enabled, the board ID value of zero is reported on the console.
Original-Change-Id: I2ff8fd5cbc8d568877b6f8bf220e146893f1e4be
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210118
(cherry picked from commit 6ba24f31583933f02be111c8767ae9df56537011)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I35ee218df35a0924d4bb8fcbc6c875450a609f24
Reviewed-on: http://review.coreboot.org/8721
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For the majority of Chrome OS boards there is no need to include board
ID calculation in any stage but ramstage, where the ID should be
available for inclusion into the coreboot table.
BUG=chrome-os-partner:30489
TEST=build only, no other tests yet
Change-Id: I1451d52382bc48cc126d40267e0f61712f4a6d4b
Original-Change-Id: Ib9c06698a399d31e79a9b14143343ba2ad46d0fb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210117
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 27dd40e85bfcd0a38f388bad4d79f5fbb77a7566)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8720
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Board ID value is usually of interest to bootloaders. Instead of
duplicating the board ID discovery code in different bootloaders let's
determine it in coreboot and publish it through coreboot table, when
configured.
BUG=chrome-os-partner:30489
TEST=none yet
Change-Id: Ia1e36b907ac15b0aafce0711f827cb83622e27bb
Original-Change-Id: Iee247c44a1c91dbcedcc9058e8742c75ff951f43
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210116
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit b2057a02db9391e2085b138eea843e6bb09d3ea2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8719
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add implementation of the GPIO API defined in src/include/gpiolib.h.
Also, clean up the GPIO driver, make it use pointers instead of
integers for register address.
This requires a touch in the SPI driver, where the CS GPIO is toggled
and in the board function where it enables USB interface.
BUG=chrome-os-partner:30489
TEST=tested with the following patches, observed proto0 properly read
the board ID.
Original-Change-Id: I0962947c6bb32a854ca300752d259a48e9e7b4eb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210115
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e951f735001509d135cc61530ed0eecb5fc31a85)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8a612dce000931835054086c1b02ebfc43dc57d2
Reviewed-on: http://review.coreboot.org/8718
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Some platforms use tertiary interpretation of GPIO input state to
increase number of distinct values represented by a limited number of
GPIOs. The three states are
- external pull down (interpreted as 0)
- external pull up (1)
- not connected (2)
This has been required by Nvidia devices so far, but Exynos and
Ipq8086 platforms need this too.
This patch moves the function reading the tertiary state into the
library and exposes the necessary GPIO API functions in a new include
file. The functions are still supposed to be provided by platform
specific modules.
The function interpreting the GPIO states has been modified to allow
to interpret the state either as a true tertiary number or as a set
two bit fields.
Since linker garbage collection is not happening when building x86
targets, a new configuration option is being added to include the new
module only when needed.
BUG=chrome-os-partner:30489
TEST=verified that nyan_big still reports proper revision ID.
Change-Id: Ib55122c359629b58288c1022da83e6c63dc2264d
Original-Change-Id: I243c9f43c82bd4a41de2154bbdbd07df0a241046
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209673
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c79ef1c545d073eaad69e6c8c629f9656b8c2f3e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8717
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
MIPS targets should be compiled with no position independent code
allowed, as the generated image often does not support short range
components reference.
BUG=chrome-os-partner:31438
TEST=with the rest of the patches included MIPS board urara builds
successfully
Change-Id: I8ac2a2f6979d3b468159c9e29d07e022f48ab18a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e932b203db3e7cb510a7bf862d4538d55b6c7271
Original-Change-Id: I637dd44eb565447c18b2c3cdb022d0933c52fd20
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215677
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8822
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Bootblock stack on Danube should be SRAM and defined separately from
the rest of the coreboot stack. The actual coreboot stack will be
defined later.
The top of the stack should be above the bottom, as the stack grows
towards lower addresses.
BUG=chrome-os-partner:31438
TEST=ran bootblock on simulator under codescape, observed stack
properly initialized.
Change-Id: I43d2bae5f85a09a95ca0103b253399bd92555aef
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e02724cb4b30990ebaa631dabb45917af29d6437
Original-Change-Id: I3c37c8b5a1c0e7fd19411558a8f6d899fc283191
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218732
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8767
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add basic board support for the ImgTec Danube Virtual Platform, which
emulates a system built around the Danube SoC.
Run this by loading coreboot.bimg into a flash device connected to SPFI1
chip select 0 & then executing the Danube boot ROM.
BUG=chrome-os-partner:31438
TEST=none yet
Change-Id: Ia62af62804bab261f3cabf7c2e62f5bb08a4a1a4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6cb1017f5e2fec85f7f5c60cd2cfec63cc886b49
Original-Change-Id: I7a2b52f304bcb4b614440ec38975e05f38b0e590
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207976
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8766
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Actual timer support is not yet available for Danube, it will be added
soon. For now, just to make the target build, modify it to use
GENERIC_UDELAY and HAVE_MONOTONIC_TIMER configuration option.
BUG=none
TEST=the target builds again
Change-Id: Iad1ceb966d5dbc8687b966be4d2506c8f92eba5a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 261837539fb5a31f96e682edbcbbbc0e588f2750
Original-Change-Id: Ie3289eace9d2baadd01bd641b5dffc635ac80c0f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220395
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8765
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Romstage initialization code does not need to be board specific, keep
it in the SOC directory. Should there be a need for the board specific
code, it can be added later.
BUG=chrome-os-partner:31438
TEST=with upcoming patches, the urara board coreboot builds fine
Change-Id: Ib619fa9313d463ded13e9259e50bb5aeaab4fb05
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c08977aaa5e9b5da29359d1920d7d8b61ce86d3
Original-Change-Id: I27e2d225bd36c42ccd29128d0ea9a970566c02af
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215992
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8764
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Iniitialize I2C bus required for TPM operation. Problem observed was that if
frequency is raised above 20KHz, TPM starts responding with NAKs either for
address or for data. Need to look into that.
BUG=None
BRANCH=None
TEST=Compiles successfully and TPM success messages seen while booting.
Original-Change-Id: I9e1b4958d2ec010e31179df12a099277e6ce09e0
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210001
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 01e87ae35431147f442e3f3e531537b8f0de1c9d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7dddc39d77f9a726fa51dd58ea9b7712c9a6fae2
Reviewed-on: http://review.coreboot.org/8715
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Instead of forcing boards to have DMA region below 4GiB, provide
Kconfig option DMA_LIM_EXCL that a board can use to set the upper
limit in MiB units on the address range reserved by DMA. By default,
this value is 0x1000 i.e. 4GiB limit on the DMA upper address.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush. Default value is seen as 0x1000.
Change-Id: Ie35d3844a0989486ae022f8922fdd4c9d7d57fb4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6716cf312a103bc0440a558fc43c8c77869816e3
Original-Change-Id: I3ecbb4ec90995ab1568cb0924d5ce9467492697d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245250
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8800
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Enable L1 Sub-State when both root port and endpoint support it.
[pg: keyed the feature to MMCONF_SUPPORT, otherwise boards
without that capability fail to build.]
Change-Id: Id11fc7c73eb865411747eef63f5f901e00a17f84
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ac04ad7e2261846e40da297f7fa317ccebda092
Original-BUG=chrome-os-partner:31424
Original-TEST=Build a image and run on Samus proto boards to check if the
settings are applied correctly. I just only have proto boards and
need someone having EVT boards to confirm the settings.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: Id1b5a52ff0b896f4531c4a6e68e70a2cea8c736a
Original-Reviewed-on: https://chromium-review.googlesource.com/221436
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/8832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Align struct members with tabs.
Change-Id: Ie8bdbd718c7217a3f3768dd037fa7c10badbc05e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/8854
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There was an empty udelay() implementation result in 0 waits.
Provide an actual implementation.
BUG=None
BRANCH=None
TEST=Built and ran through to depthcharge on rush.
Change-Id: Ia7060566a71c36bb7e4543c2fe4ee49d168518c7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c8832e73de238358ea801ccd7c2330de35a7b40e
Original-Change-Id: I201f2fdc4e4f5c88d48e4002839b03e808a5a1bc
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210827
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8830
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of using rela_time use the stopwatch API as the
semantics fit perfectly with the expiration usage.
BUG=None
BRANCH=None
TEST=Built, but similar usage tested on tegra132.
Change-Id: I1147f2bed84b93d1b776205df9ae04d1db9c98a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c38e054dd166d5eb53f692833b5ce88a230816e3
Original-Change-Id: I6d3f3da4e035e872890d8b67947b17a981673dba
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8819
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of open coding the monotonic timers use the stopwatch
abstraction.
BUG=None
BRANCH=None
TEST=Booted and noted timings work as expected. Built with software_i2c
and no compilation failures.
Change-Id: Ie5ecdd5bc764c1ab8ba4a923e65a1666aacd22f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c7bffb5aeb41e9b88cd2c99edd6abc38f1dc90af
Original-Change-Id: I0170fe4b93d9976957a2dcb00a6ea41ddc0320ce
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219495
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8817
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Simplify the SPI timeout by using the stopwatch.
BUG=None
BRANCH=None
TEST=Built nyan. Confirmed stopwatch works independently.
Change-Id: Ida26a0748d4b5a6a28aa8f6e2b92fe2ee4cbe17f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 900d7ac826b76d49290033c87849bf776684f2c1
Original-Change-Id: I84b7949060326b7c6cc1872420b93bd44604c4d3
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219493
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8816
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There's a lot of places where expiration and running time are
open coded. Allow for those places to be simplified by adding
a stopwatch construct. The stopwatch can have an expiration or
just be used to accumulate time.
BUG=None
TEST=Built and verified API works as expected by using implementation.
Change-Id: Ibd636542b16d8554f1ff4512319a53dce81c97e5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc623a1b36eb08c5877591c4509cd61131c62617
Original-Change-Id: I53604900fea7d46beeccc17f1dc7900d5f28518b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219492
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8815
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The upcoming MIPS toolchain inside chroot generates elf images of
elf32-tradlittlemips format, whereas readily available tools outside
of chroot generate images of elf32-littlemips format. Both of these
formats are perfectly fine, but xcompile accepts only one format per
CPU architecture.
This patch allows to specify multiple formats per architecture, any
matching format will suffice.
BUG=chrome-os-partner:31438
TEST=emerged arm, x86 and mips targets inside chroot
Change-Id: I2c6b8e46b9299059b8e099b93c8c3dcf0a569899
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7f2f1d51643f33b72ac5e4091669f38662e5b9ce
Original-Change-Id: I22405e71ac72b985fad51e2f5d7cc014107b8a9e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214599
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8823
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a new utility named bimgtool, a simple tool which generates boot
images in the BIMG format. This is the format the Danube boot ROM
expects the user supplied code to be wrapped in, it is described by
struct bimg_header in the code.
This utility will be used to wrap the coreboot bootblock when building
Danube targets.
BUG=chrome-os-partner:31438
TEST=none yet
Change-Id: I08ddb1b70d0b1feb1ffb3d62c4e5e6f07f4acdb7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7fe6a9f383b79120f9ae231453d4b3a0f85b4fa7
Original-Change-Id: I63b9f5e09cd1f12765317b38e2a0dd033cdd6d39
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207975
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8768
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These modules are necessary to resolve external names when building
the board image. These are just skeletons for now which will be filled
later.
BUG=chrome-os-partner:31438
TEST=when config is enabled, emerge-urara coreboot succeeds. more
extensive testing to come later
Change-Id: I0fcb5d33187172ecac77041425402b33e89e8944
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94ec79b0ab872f5c5fe7db5bef5fdabf77d6b3b6
Original-Change-Id: I69cc178976a910ebf8031ed9ac9ad67b4cc0878a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215678
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8763
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add build infrastructure and basic support code for the ImgTec Danube
SoC. This support is sufficient to run on a simulator.
BUG=chrome-os-partner:31438
TEST=none yet
Change-Id: I59e36589765bf06b075fd4850215a0ef71246bb1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 881278d7fbb8e6803bc8f6f9e84c64640b097401
Original-Change-Id: Ia7ed7288b13085db7ff37b5ad75d978b6137f958
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207974
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8762
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With the proper configuration flags enabled, do_printk is available
from src/console, no need to define it elsewhere.
BUG=chrome-os-partner:31438
TEST=with upcoming patches, the urara board coreboot builds fine
Change-Id: I82071b4ca1686639c0bd39c63a06b61cb5bf5571
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 69c655537c50274a61cf123b7fc387ec60dd29c7
Original-Change-Id: Ib1e3e5750cdc1adc509b4580a4f24d3ff3b105ee
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215862
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8761
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the build infrastructure and basic architectural support required
to build for targets using the MIPS architecture. This is sufficient
to run on a simulator, but will require the addition of some cache
maintenance and timer setup in order to run on real hardware.
BUG=chrome-os-partner:31438, chromium:409082
TEST=none yet
Change-Id: I027902d8408e419b626d0aab7768bc564bd49047
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fcc0d934d7223922c878b1f87021cb5c2d7e6f21
Original-Change-Id: If4f99554463bd3760fc142477440326fd16c67cc
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207972
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8760
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As MIPS toolchain does not provide adequate support for 64 bit
division and shift operations, the missing functions are required to
be provided by the user.
This patch brings in the Linux implementation of the 64 bit arithmetic
shift borrowed from arch/mips/lib/ashldi3.c (eg. Linux v3.14).
BUG=chromium:406038
TEST=With the upcoming patches coreboot successfully builds for MIPS
targets in chroot (coming later).
Change-Id: I2168f69352a9b9e3c5d197489f701a442e65703c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8ec616161be8ad3aeb6494e7121615e3329b414d
Original-Change-Id: Ia1ccb29d4c9f3c95e04e06f6af7ce8a00e2e7455
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214156
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8759
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The raw_write_sctlr_current() cannot be used in mmu_disable() because
it pushes some registers to cached stack, and then just after cache
disabled, the value was gone.
BRANCH=none
BUG=none
TEST=build and boot on mt8173-evb
Change-Id: I512405b7917f27d16bdd3c51d9459827ad714e67
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aafe64922cc4cd01ecb099db106d04538e3e57ff
Original-Change-Id: I0dda8518d14c46fae1fe76e3629bd4ee81c1e0ee
Original-Signed-off-by: HC Yen <hc.yen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/240323
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8799
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Duncan Laurie