Currently it prints a list of components in CBFS and their size/type.
There's a bunch of additional output that could be printed, but that's
for another patch.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4404 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Rename the "coreboot" menu "firmware", and add a module to parse
the multiboot table. For now, just parse memory, but it can be
expanded as needed.
Signed-off-by: Jordan Crouse <jordan@cosmicpenguin.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
ramdump screens. This fixes unaligned display on serial console.
The current isprint() implementation assumes a C locale, so also
characters with the eigth bit set are supressed (they produced
inconsistant results on VGA and serial anyway).
Signed-off-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3621 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
immediately overwritten by stdscr.
Signed-off-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3599 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
not a character array.
Signed-off-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3492 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
the setting of CC in the payload (coreinfo) when calling
make CC=i386-elf-gcc AS=i386-elf-as AR=i386-elf-ar STRIP=i386-elf-strip
This still does not cope with the hardcoded -fno-stack-protector in
libpayload's Makefile.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3477 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is useful for use with (e.g.) Bayou in order let the user customize the
payload name, description, version, etc.
For instance, instead of using stock coreinfo and calling the payload
"coreinfo" and the Bayou menu item "Show system information" a user might
only be interested in an NVRAM dump payload. Thus, he/she can enable
only the NVRAM coreinfo module via Kconfig, and tell Kconfig to call
the payload "NVRAMdumper" and the Bayou menu item "Show NVRAM contents".
This is build-tested, and tested against Bayou in QEMU.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3472 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Build-tested against the latest libpayload.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3471 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This will even reduce the final payload size a bit.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3427 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
allows you to scroll through the RAM contents.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3419 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Remove the lines preventing serial + curses thanks to r3370. Trivial.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3371 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
These values are consumed by the chooser payload. listname is
presented on the chooser menu.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3355 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Enable the ESC key to close coreinfo - useful if you are using a chooser
and want to return to it.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3340 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Changes to libpayload to fix subwindows broke coreinfo. This fixes it,
and improves performance by eliminating the entire screen refresh every
second.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3339 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
the bottom of the screen - this turns the function keys into
categories and then list specific items as part of the category.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3285 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
this and re-commiting so that the history and comments are correct.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3284 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
rdtsc.h shouldn't be included unless we really need it (and use it).
Trivial.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3283 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It displays the coreboot printk buffer in RAM and let's you scroll through it.
This feature is only available for coreboot v3 though, as v2 doesn't have a
printk-buffer feature, yet.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3247 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Until now, the build would break, and even if it didn't the ELF would
triple-fault in QEMU.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3216 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
coreinfo features / modules will consume (trivial).
The measurements were done with libpayload r3213 (but compiled with -Os),
and coreinfo r3211 (also compiled with -Os).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3214 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
by not deleting build/config.h during 'make clean' (only in 'make distclean').
Also, change the default behaviour of 'make' from asking the user to
run 'make config' (or similar) to actually _run_ 'make config' without
asking questions. It's always possible to explicitly invoke
'make menuconfig' or 'make xconfig' and so on, of course.
Finally, make _all_ targets (allyesconfig, randconfig, and so on)
generate a build/config.h file, as we always #include it.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3211 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
displaying the current date/time in the lower-right corner (optional).
Also, only build/use coreinfo modules which were selected in kconfig. This
makes coreinfo truly modular, and you can save quite a bit of ROM space
by disabling unwanted parts of coreinfo.
Finally, simplify the Makefile a bit by getting rid of MODULES (and only
using OBJECTS).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3203 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Show PCI IDs as 4-digit numbers always.
- Cosmetic changes to make UI look more consistent.
- Drop MODULE_COUNT #define and use ARRAY_SIZE() where needed.
- Small fix to improve build system (create build/ when not there).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3191 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
supported features configurable later (currently unused). Store all
build files and results (coreinfo.elf) in build/ now.
I'm self-acking this as (though non-"trivial") it doesn't affect coreinfo
in its functionality, this is more or less a "cosmetic" change to the
build interface ("make" -> "make menuconfig && make").
This is a kconfig checkout from the Linux kernel (where kconfig is being
actively maintained) from 03/2008. The hash identifying the last commit
to kconfig is 587c90616a5b44e6ccfac38e64d4fecee51d588c.
The amount of changes to kconfig itself has been kept as small as possible
to keep the diff small and to ease updating/porting to newer kconfig versions.
The following changes were performed on the upstream Linux kconfig:
- s/kernel/coreinfo/, and s/Linux/coreinfo/ in various strings.
- Consistently use the env. variable KERNELVERSION in all kconfig
interfaces -- e.g. config/menuconfig/gconfig/xconfig -- as version number.
- Hardcode our paths/filenames in some places (could be improved upstream).
- Always write .config and build/config.h, no matter which kconfig
interface is used (config/menuconfig/gconfig/xconfig). We want to
include build/config.h in our code.
- Adapt the kconfig Makefile for our purposes (build/ directory, rules, etc).
In addition, a few items in the coreinfo Makefile are needed for this to work.
This kconfig setup is successfully tested with all targets from 'make help':
config - Update current config utilising a line-oriented program
menuconfig - Update current config utilising a menu based program
xconfig - Update current config utilising a QT based front-end
gconfig - Update current config utilising a GTK based front-end
oldconfig - Update current config utilising a provided .config as base
silentoldconfig - Same as oldconfig, but quietly
randconfig - New config with random answer to all options
defconfig - New config with default answer to all options
allmodconfig - New config selecting modules when possible
allyesconfig - New config where all options are accepted with yes
allnoconfig - New config where all options are answered with no
For 'make defconfig' to work you have to do (which we don't need in coreinfo):
$ mkdir configs; touch configs/defconfig
You can also use 'make foo_defconfig' in which case kconfig will use a
file called 'configs/foo_defconfig' as basis.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3188 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, disable header() for now, as it's not being used.
Here are some stats on size differences:
- ls
23820 coreinfo.old.elf
23564 coreinfo.new.elf
- size *elf
text data bss dec hex filename
15199 2468 181904 199571 30b93 coreinfo.old.elf
14934 2468 181912 199314 30a92 coreinfo.new.elf
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3187 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is the intial release of the coreinfo payload code.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3173 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Uwe Hermann