Commit Graph

5 Commits

Author SHA1 Message Date
Duncan Laurie 7724f1142e lp/drivers/usb: Add quirk for QEMU XHCI root hub
The QEMU XHCI driver does not implement the Port Change Detect bit
in the USBSTS register.  As a result no devices are attached without
looking at each port individually.

Detect this as a quirk based on the QEMU XHCI controller PCI ID,
and apply it to the root hub quirk list so it can get used by the
generic hub driver to skip this check.

With this change an attached USB mass storage device is detected and
able to boot when supplied to qemu:

  -drive if=none,id=usbmsc,format=raw,file=/tmp/disk.img
  -device qemu-xhci,id-xhci
  -device usb-storage,bus=xhci.0,drive=usbmsc

Change-Id: I6689cb1dbb24c93d45f5c5ef040b713925d07588
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39839
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01 06:11:42 +00:00
Raul E Rangel 1b43ad7149 libpayload/generic_hub: Detect port disconnect after reset
If a port disconnects after a reset we should abort any initialization
on the port. This might mean the device has re-enumerated as a 3.0 device
so the hub should be scanned again.

BUG=b:76831439
TEST=Verified USB-C devices that get detected correctly in depthcharge.

Change-Id: Iad899544684312df1bef08d69b5c7f41eac3a21c
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-17 20:38:46 +00:00
Shawn Nematbakhsh a16029a93d libpayload: usb: Remove generic roothub reset port function
The generic roothub reset port function is overly broad and does some
things which may be undesirable, such as issuing multiple resets to a
port if the reset is deemed to have finished too quickly. Remove the
generic function and replace it with a controller-specific function,
currently only implemented for xhci.

Change-Id: Id46f73ea3341d4d01d2b517c6bf687402022d272
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/189495
Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 54e1da075b0106b0a1f736641fa52c39401d349d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7001
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-10-02 17:28:47 +02:00
Julius Werner e00ba2168b libpayload: usb: Unify USB speed between XHCI stack and USB core
This patch removes the confusing concept of a special "xhci_speed" with
a different numeric value from the usual speed used throughout the USB
core (except for the places directly interacting with the xHC, which are
explicitly marked). It also moves the MPS0 decoding function into the
core and moves some definitions around in preparation of later changes
that will make the stack SuperSpeed-ready. It makes both set_address
implementations share a constant for the specification-defined
SetAddress() recovery delay and removes pointless additional delays from
the non-XHCI version.

Change-Id: I422379d05d4a502b12dae183504e5231add5466a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170664
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit f160d4439c0d7cea1d2e6b97207935d61dcbb2f2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6776
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-09-04 01:28:42 +02:00
Nico Huber 0b78de2ee9 libpayload: Add a generic driver for usb hubs
The current drivers for external usb hubs and root hubs all follow
the same pattern. Before adding another one with 90% of the same code,
extract the common parts and rewrite them with a simple interface.

This also adds debouncing of new attachments. Current drivers just
waited 100ms before they reset the device. However, we should check
if the device becomes disconnected and reconnected during this period.

Porting of the current hub drivers will take place in separate
commits (when I have time to test the older HCIs).

Change-Id: I0c0ce0ac1b1cc51fb4cd009b3f9fcd1b9d2ba8fe
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3450
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13 22:17:42 +02:00