Add a recipe to build UniversalPayload.elf, which uses a wrapper for the
UniversalPayloadBuild.py that is hosted in the edk2 repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2aa318513244f576e07e72713fad3b4f7bd7c22e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Specifying a build target only applies to UefiPayloadPkg, so guard it
against the relevant Kconfig option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia4597b5ed76616e39cec45f8a69be9f1ccd72d4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The silent switch, `-s`, only works for building UefiPayloadPkg. Guard
it against the relevant Kconfig option so that it doesn't cause
problems with other targets.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5a5df636e6484a435c849c6d19c7cb61e8e62ee6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68181
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Upstream edk2 doesn't work, but we still have the option for it
for testing.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6ec9f4746640baa030762650ab7b83d85ab8c1e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Until recently, there were two options to build edk2, UefiPayloadPkg and
CorebootPayloadPkg. Now, there is only one, UefiPayloadPkg but soon,
there will be Universal Payload.
It makes more sense, as the official edk2 repository doesn't work with
coreboot, to have the build target and repository separate. That will
allow for building either UefiPayloadPkg or Universal Payload from the
official repository, MrChromebox' fork or a custom repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If7f12423058ef69838741f384495ca766ccea083
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
skiboot's Makefile always executes $(CC) to determine whether its clang
or GCC and not setting CROSS for clean target results in this annoying
output (assuming `powerpc64-linux-gcc` isn't available):
make[2]: powerpc64-linux-gcc: No such file or directory
Change-Id: I242b2d7c1bdf1bbd70fd4e4e0605341fe8301ca5
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
This patch introduces new target: junit.xml-unit-tests, which builds and
runs unit-tests. It also creates build log containing build logs. This
feature allows for one to see build failures in Jenkins dashboard.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I94184379dcc2ac10f1a47f4a9d205cacbeb640fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67372
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CL:3825558 changes all vb2_digest and vb2_hash functions to take a new
hwcrypto_allowed argument, to potentially let them try to call the
vb2ex_hwcrypto API for hash calculation. This change will open hardware
crypto acceleration up to all hash calculations in coreboot (most
notably CBFS verification). As part of this change, the
vb2_digest_buffer() function has been removed, so replace existing
instances in coreboot with the newer vb2_hash_calculate() API.
Due to the circular dependency of these changes with vboot, this patch
also needs to update the vboot submodule:
Updating from commit id 18cb85b5:
2load_kernel.c: Expose load kernel as vb2_api
to commit id b827ddb9:
tests: Ensure auxfw sync runs after EC sync
This brings in 15 new commits.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I287d8dac3c49ad7ea3e18a015874ce8d610ec67e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
A new ChromeOS automated test will be introduced to check the cbmem log
of diagnostic boot mode. Because the diagnostic boot does not allow
booting into kernel, the test must perform AP reset and then check the
cbmem log afterwards. However, the memory content might not be written
back to memory (from CPU cache) during AP reset because of the cache
snooping mechanism on x86. Hence, some API to flush cache is needed.
Implement dcache_* to allow flushing cache proactively in x86. To avoid
unnecessary flush, check dma_coherent before calling dcache_* functions,
which will be always true in x86. Therefore, this change won't affect
the original functionality.
BUG=b:190026346
TEST=FW_NAME=primus emerge-brya libpayload
Cq-Depend: chromium:3841252
Signed-off-by: Hsin-Te Yuan <yuanhsinte@google.com>
Change-Id: I622d8b1cc652cbe477954a900885d12e6494d94d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Whilst UefiPayloadPkg is always built with support for 32-bit
and 64-bit, this is not the case for all edk2 targets. Move this
to the build command so they can be specified on each target.
Also add the `-s` switch, which stands for quiet to suppress edk2
printing War and Peace whilst building.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If94abd4e28917718c76ad5945966e7be668c8f61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66364
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename the update recipe, which updates the edk2 repository, to
$(EDK2_PATH). There is no functional change here.
This recipe must be phony so it runs every time.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I30fedbee7459b79a85a23678e0075368eda95da0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66363
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When cloning edk2, download the submodules at the same time. There is
no functional change here, just a minor speed improvement.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieeb481346093588bd8d237857966001dc81460b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66362
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
First, remove the `-p` flag; as it's a file target it's not needed in
this case.
Second, remove the clone as this is handled in the update recipe.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3829a3151be2d05a067a160fa770e5eb7ad4aad4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66361
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Convert UefiPayloadPkg (UEFIPAYLOAD.fd) to a file target.
There is no functional change here, it just avoids it being copied
out of the build dir, into an output directory and then into build.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iff097f6f1e715c697c33c50c395d7c1b88cc6280
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66360
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Separate the tasks that are required to be completed prior to building
edk2 into a prep recipe. This allows this to be used for building
different targets.
This also ensures that the COREBOOT toolchain is used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic4ae8ac4118a5747f38297d0fbf4cb53aa3b6d6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66359
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Separate the Release String from the Build String. This allows
the makefile to locate built files more precisely.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id98674f0bbf485b2bfdbf5784d325c5ac89ad076
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66358
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current edk2 makefile will work in a directory that's name is
derived from the repository, such as `mrchromebox` or `starlabsltd`.
Move this under a directory, so that it can be ignored by git and
so that the makefile can be adjusted to use file targets, rather
than phony recipes with wildcards.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If0c80dbc59130f229b78cab9578115e14172301d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66356
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Logo.bmp is overwritten with a custom one from coreboot. This needs to
be restored before the branch is updated otherwise git will report that
the repository is dirty.
Move this to the update recipe so that will always be done for any
recipe that needs to update the branch.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I85bf753a47d9e70d6555dec9a539e8ed7395bead
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66355
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the code that prints the edk2 build options to it's own recipe
so that it can be called for different targets.
This change also fixes the print, as it accounts for recent switches
such as `--pcd` and `-s`.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie797ca26cd28eab0f633bd8dee5ec19634fcea99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
coreboot uses TianoCore interchangeably with EDK II, and whilst the
meaning is generally clear, it's not the payload it uses. EDK II is
commonly written as edk2.
coreboot builds edk2 directly from the edk2 repository. Whilst it
can build some components from edk2-platforms, the target is still
edk2.
[1] tianocore.org - "Welcome to TianoCore, the community supporting"
[2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform
firmware development environment for the UEFI and UEFI Platform
Initialization (PI) specifications."
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
When removing SD card from USB card reader, the USB MSC stack does
not detach the device immediately. Instead, the USB MSC stack calls
usbdisk_remove() and calls usb_msc_destroy() after several pollings.
It results in usbdisk_remove() being called twice.
Since the usbmsc_inst_t instance is freed after first usbdisk_remove()
call, the second call invokes an invalid usbmsc_inst_t instance and
causes exception in CPU.
This patch prevents usbdisk_remove() from being called twice by setting
usbdisk_created to zero.
BUG=b:239492347
TEST=insert an empty SD card into the USB card reader then remove
the SD card. AP firmware does not crash.
Change-Id: I0675e9fde3e770d63dd0047928356a204245ef18
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66449
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Recent changes to both coreboot and edk2 means that UefiPayloadPkg
seems to work on all hardware. It has been tested on:
* Intel Core 2nd, 3rd, 4th, 5th, 6th, 8th, 8th, 9th, 10th,
11th and 12th generation processors
* Intel Small Core BYT, BSW, APL, GLK and GLK-R processors
* AMD Stoney Ridge and Picasso
This includes the problematic Lenovo X230s. The most likely fixes are:
* Configuring the PCI Base and Length in edk2
* Fixes to the HostBridgeLib in edk2
* Adjustment to the SD/eMMC initialisation timeout
This means we can now remove the already deprecated option for
CorebootPayloadPkg and the legacy 8254 timer build option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ice7b7576eb3d32ea46e5138266b7df3fbcdcf7ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
the missing `; \` at the end of the line meant subsequent lines
were no longer run from $project_dir, so Logo.bmp was silently
failing to restore. This led to the working dir being dirty,
and on subsequent runs, any change to a different branch in the
same repo would fail.
Change-Id: I17a323bc2dda19b69d809e398b273f24e14b43af
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66321
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add 'pci_map_bus' function and PCIE_QCOM config for Qualcomm platform.
BUG=b:182963902,b:216686574,b:181098581
TEST=Verified on Qualcomm sc7280 development board with NVMe endpoint
(Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is
getting detected in response to 'storage init' command in depthcharge
CLI prompt.
Output logs:
->dpch: storage init
Initializing NVMe controller 1e0f:0001
Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY
Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0
* 0: NVMe Namespace 1
1 devices total
Also verified NVMe boot path that is depthcharge is able to load the
kernel image from NVMe storage.
Change-Id: I7d1217502cbd7d4d0cdd298919ae82435630d61c
Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com>
Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57615
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update MrChromebox’ default branch from uefipayload_202107 to
uefipayload_202207.
This is based on upstream edk2, commit f26b70c (UefiPayloadPkg:
Add support for logging to CBMEM console).
Tested on:
* StarBook Mk V
* StarLite Mk III
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I16a012485e4b4957439e776914ffd016b4506a47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66083
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
SMMSTORE support in edk2 was not allowed in upstream edk2
as it was bootloader specific.
Shortly, it will be built from edk2-platforms and then,
it will be retired.
For now, the patches exist in the MrChromeBox fork (TIANOCORE_UEFIPAYLOAD), so enable
these by default when SMMSTORE_v2 is enabled.
Change-Id: I1861bf739c2e25f661b4f06a303348f0537dc8b3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65867
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allow passing custom build parameters to any version of edk2, not
just forks.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4eed535415ba15ae73e22cada9153820538f5f6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Bind the PCDs that allow edk2 to use the whole display to a
Kconfig option called TIANOCORE_FULL_SCREEN_SETUP.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic977a199f3b308c566391e37f126c4fe518b2eb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The `call int-multiply` couldn't handle the Kconfig option being a
string so do the calculation in bash.
Tested on:
* Qemu
* StarLite Mk III
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1879d7efd504e2c42dadb12d2d8add4f69ca7b9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66161
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This caused edk2 serial output to be disabled 100% of the time.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If272369b405e7745fe82f49026cbed0abc50f355
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66160
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
converting the SVG logo to BMP at compile time using 'convert'
introduces terrible aliasing artifacts, so use a properly converted
BMP file as the default instead.
Test: boot qemu w/Tianocore, observe lack of aliasing in coreboot logo
Change-Id: I62d643c24abca57fa35b79732d8cedc83b94815f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
commit 108e537928
("payloads/tianocore: Add a proper target for the Boot Splash")
introduced 2 bugs in bootsplash handling:
- the "logo" make target added a spurious "/edk2" to the project dir
- the "logo" make target failed to account for the case where no user-
defined logo file is used (the upstream Tianocore one will be used
in this case)
Fix both these issues.
Test: build/boot qemu w/Tianocore w/o user-defined bootsplash file.
Change-Id: Ieebc547670213459823f58956ae87c6bf94b74ef
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
edk2's default is to show a Boot Splash with their own logo which
looks like it's from the 1960's. Therefore, we replace this image
with coreboot's logo, taken from https://coreboot.org unless a
custom one is specified.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1b133e2a2cfd45a6650e4523b267f7508974137b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Firstly, change the unit of `μs` to `ms` so it's easier to read.
This patch changes the default amount of time allowed to initialise
SD Card Readers and eMMC drives from 1ms to 10ms. Having a timeout
too short will stop certain devices from booting, which was seen on
google/akemi; it throws an exception when attempting to boot from
the internal eMMC drive.
This new value is still lower than upstream edk2's value of 1s.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id1f66d5d50f889f07a34836ab2932b28ef7fb245
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Markdown, definition file and sconfig source codes don't need to be
executables. This patch fixes that.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Change-Id: Ic97d684318c689259f7895e3dfbd552434c3882e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Limited to two legacy build options to only be set when
CorebootPayloadPkg is used, as they don't exist in UefiPayloadPkg.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I71aaa940543075962e167b52b23f45976d39c616
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Set all PCDs relating to console size to 0, which allows edk2 to
use the full framebuffer.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id105a2c822a2b05da6e45dac9deeca1f155bfa33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Hook up edk2 build options PCIE_BASE_ADDRESS and PCIE_BASE_LENGTH to
CONFIG_ECAM_MMCONF_BASE_ADDRESS and CONFIG_ECAM_MMCONF_LENGTH.
This patch has been reviewed upstream but not yet merged (2022/07/08).
It won't cause any problems for any existing branches or forks that do
not have this build option hooked up.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie5d50cc4619354d3c98adf6cde12c192be759869
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
ConSplitterDxe uses the intersection of all outputs, which includes
serial, for the list of supported text modes. When serial output is
supported, this slows down performance and limits the size of
FrontPage.
Only enable edk2's serial support when it's a debug build as
it's the only case where there will be debug output.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic3633767dabb3543e865aa65c4101840a7b69cc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Branding changes to unify and update Chrome OS to ChromeOS (removing the
space).
This CL also includes changing Chromium OS to ChromiumOS as well.
BUG=None
TEST=N/A
Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Show the build options that are passed to edk2 in one clear block.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I917a8c1d3ac8f2a223e584fec10689679835630c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Most of the Kconfig options are upstream, so they should exist in
most forks. Therefore, allow them to be set and passed when using
a custom repository or upstream edk2.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I31e6e267ee6e4e3a254f733e1dfc1ecb3a3d3576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
After commit 63e54275f6 (libpayload: Implement new CBFS access API),
libpayload includes headers from commonlib/bsd, which in turn include
vb2_sha.h from vboot after commit 0655f78041 (commonlib/bsd: Add new
CBFS core implementation). Usually submodules are initialized by the top
level Makefile.inc, but since this file is never read when building
libpayload based payloads outside the main coreboot build, the header
cannot be found unless the vboot submodule had previously been
initialized. This is especially evident when following Tutorial 1 in the
documentation, where the coreboot repo is cloned without recursing into
submodules and coreinfo is built separately from the coreboot build
using `make -C payloads/coreinfo`.
TEST=Deinitialize submodules and run `make -C payloads/coreinfo`.
Coreinfo should build without error.
Change-Id: I29b16525999921fbce51c2459d3d534b64e00b3c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65222
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If no directory is found then no harm is done either.
Change-Id: I0842ec106f11eca80bf01fd4771e1dfc4588b3fa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Sean Rhodes