`lib_sysinfo->serial` is a virtual pointer into coreboot tables.
It's not valid across relocation. Accessing the wrong value during
relocation of FILO resulted in a hang with DEBUG_SEGMENT and UART
console enabled. Work around that by caching the whole table entry
locally.
An alternative would be to revise `sysinfo`, to contain no virtual
pointers to anything outside the payload.
Change-Id: I03adaf57b83a177316d7778f7e06df8eb6f9158e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reto Buerki <reet@codelabs.ch>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I5be3904298cd88c60dbc6d8d662beeede2abe442
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35960
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
depthcharge prefers knowing where its input comes from
BUG=b:137378326
BRANCH=none
TEST=ctrl-d / enter to enter dev-mode works now.
Change-Id: I74b5be18c3583be17c73950ced93fad883690090
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
UART RX needs to be re-initialized in libpayload
as it is getting reset at the end of coreboot.
Change-Id: I7820bd7afd2e5f81e21a43f330ed42d3a732d577
Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Depthcharge uses the keyboard type to help determine whether
it can trust the keyboard for security-sensitive confirmations.
Currently it trusts anything except usb, but now there's a need
to distrust ec-based ps/2 keyboards that are associated with untrusted
ECs. To help facilitate this, coreboot needs to report more
details about non-usb keyboards, so this change replaces the current
instances of unknown with enum values that distinguish uart and gpio
from ec-based keyboards.
BUG=b:129471321
BRANCH=None
TEST=Local compile and flash to systems with trusted and non-trusted
ECs. Confirmed that security confirmation can't be performed via
keyboard on a system with an untrusted EC but can still be performed
on a system with a trusted EC.
Change-Id: Iee6295dafadf7cb3da98b62f43b0e184b2b69b1e
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch is a raw application of
find payloads/ -type f | \
xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch removes several timer and serial drivers (and configs) that
were specific to platforms which have been dropped in coreboot.
Change-Id: I589ca7f1a3b479f1c2b1b668a175a71583441ac9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
When console input driver registers itself, perform flush of input
buffer to avoid interpreting any stale key presses before libpayload
is run.
keyboard.c: Remove the redundant buffer flush.
8250.c: Ensure that serial_hardware_is_present is set before call to
add input driver.
BUG=b:37273808
TEST=Verified that any key presses in serial console before payload is
up do not have any effect after the payload starts running.
Change-Id: I46f1b6715ccf6418f5b2c741bf90db2ece26a60d
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19345
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: Ibf2c91be93e2567cc1262b6fb84461eef51ab3e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b87157138302b017e64a28417a22421c880c1bcb
Original-Change-Id: I16a8324d3c8ef4ee729f4509fda5bfe703b24ce4
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333304
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14656
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There is a lot of generic code in the 8250 driver that should
be available for non-8250 systems with serial ports as well.
Change-Id: I67fcb12b5fa99ae0047b3cbf1815043d3919437e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14371
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This fixes serial on rk3288.
Change-Id: I3dbf3cc165e516ed7b0132332624f882c0c9b27f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13636
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The more generic 8250 driver can handle both port-mapped and memory-
mapped 8250-compatible UARTs, with different register sizes. Thus, a
separate driver for MMIO32 is not needed.
The generic 8250 driver was tested to work for both output and input,
on Apollolake SoC, which only presents an MMIO32 UART.
Change-Id: Idab766588ddd097649a37de92394b0078ecc660a
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/12524
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Wished I hadn't seen that. Git saw the conflict (file was gone), both
committer and reviewer thought it would be a good idea to re-add it as
dead code (see 558e9b5: libpayload: Add minimal support for PL011 UART).
Change-Id: Ifea8113fbc59e0463eaedb86b976f54ec11113a9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This will make the code work with the different styles
of Kconfig (emit unset bools vs don't emit unset bools)
Roughly, the patch does this, and a little bit of fixing up:
perl -pi -e 's,ifdef (CONFIG_LP_.+?)\b,if IS_ENABLED\($1\),g' `find . -name *.[ch]`
perl -pi -e 's,ifndef (CONFIG_LP_.+?)\b,if !IS_ENABLED\($1\),g' `find . -name *.[ch]`
Change-Id: Ib8a839b056a1f806a8597052e1b571ea3d18a79f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10711
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Some SOCs (like pistachio, for instance) provide an 8250 compatible
UART, which has the same register layout, but mapped to a bus of a
different width.
Instead of adding a new driver for these controllers, it is better to
have coreboot report UART register width to libpayload, and have it
adjust the offsets accordingly when accessing the UART.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the rest of the patches integrated depthcharge console messages
show up when running on the FPGA board
Change-Id: I05891a9471a5369d3bfafe90cd0c9b0a7e5a667e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42
Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240027
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9739
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have two drivers for a 100%-identical peripheral right now, mostly
because we couldn't come up with a good common name for it back when we
checked it in. That seems like a pretty silly reason in the long run.
Both Tegra and Rockchip SoCs contain UARTs that use the common 8250
register interface (at least for the very basic byte-per-byte transmit
and receive parts we care about), memory-mapped with a 32-bit register
stride. This patch combines them to a single 8250_mmio32 driver (which
also fixes a problem when booting Rockchip without serial enabled, since
that driver forgot to check for serial initialization when registering
its console drivers). The register accesses are done using readl/writel
(as Rockchip did before), since the registers are documented as 32-bit
length (with top 24 bits RAZ/WI), although the Tegra SoC doesn't enforce
APB accesses to have the full word length. Also fixed checkpatch stuff.
A day may come when we can also merge this driver into the (completely
different, with more complicated features and #ifdefs) 8250 driver for
x86 (which has MMIO support for 8-bit register stride only), both here
and in coreboot. But it is not this day. This day I just want to get rid
of a 99% identical file without expending too much effort.
BUG=None
TEST=Booted on Veyron_Pinky and Nyan_Blaze with and without serial
enabled, both worked fine (although Veyron has another kernel issue).
Change-Id: I85c004a75cc5aa7cb40098002d3e00a62c1c5f2d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7959c19356d2922aa414866016540ad9ee2ffa8
Original-Change-Id: Ib84d00f52ff2c48398c75f77f6a245e658ffdeb9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225102
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9387
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The serial driver hangs in cases when FIFO has more than single word to be
processed. Easiest way to reproduce is to paste a string of greater than 4
characters in cli.
Clearing the RXSTALE interrupt without draining all the characters from FIFO
leads to the issue as the driver is dependent on msm_boot_uart_dm_read
function to reinitialize for next transfer.
Logically the driver is organized in such a manner that next transfer never
gets initiated till rx_data_read < total_rx_data. Clearing the RXSTALE without
consideration of total number of characters (or words) unprocessed makes the
msm_boot_uart_dm_read to return on the first if conditional. Thus the driver is
stuck forever.
A quick fix is to avoid clearing the stale interrupt. Reset is handled whenever
a new transfer is initialized in msm_boot_uart_dm_init_rx_transfer.
BUG=chrome-os-partner:29542
TEST=manual
-Paste a string greater than 4 characters in cli.
Original-Change-Id: I016afb01a77cd14764f0176f6bf144fb29796c2f
Original-Signed-off-by: Yogesh Lal <ylal@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209512
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
(cherry picked from commit 61528884ad2c0a8e146054bbfeb01a3bc73b9692)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I936af5daa52a25f62133bdf9fb44f0b68cf34e88
Reviewed-on: http://review.coreboot.org/8667
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add support:
1)Support driver rktimer
2)Support driver rkserial
BUG=chrome-os-partner:29778
TEST=emerge-veyron libpayload
Original-Change-Id: I2cccedf3b62883dd372842a7972e93f2ebbfb282
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/206184
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 387450d7c36b201bd177d46eb9f1d280fc043aab)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia6b7a8ee2439a6f2bf7577df822d3f4f3a1e441c
Reviewed-on: http://review.coreboot.org/8127
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This adds a UART driver for the ipq8064 controller. It still does not
quite work in the receive direction - the receive FIFO returns read
data in 32 bit chunks, which means that 4 keys need to be pressed
before a character pops out of the driver (and it reports it as a
single character).
This issue is being addressed separately, the driver is being checked
in to facilitate concurrent development.
BUG=chrome-os-partner:27784, chrome-os-partner:29313
TEST=with deptcharge modifications in place, the AP148 board comes up
to the depthcharge prompt:
Starting depthcharge on storm...
Original-Change-Id: Ief2cfcca73494be5c4147881144470078adcefb8
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202045
Original-Reviewed-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 4499318fb9a4e663c504d7c41380ccf2aa89da29)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3e07d7568c20c0e570222971ff219de3a6d9b7cc
Reviewed-on: http://review.coreboot.org/8061
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The console output driver framework in libpayload is currently built on
the putchar primitive, meaning that every driver's function gets called
one character at a time. This becomes an issue when we add drivers that
could output multiple characters at a time, but have a high constant
overhead per invocation (such as the planned GDB stub, which needs to
wrap a special frame around output strings and wait for an
acknowledgement from the server).
This patch adds a new 'write' function pointer to the
console_output_driver structure as an alternative to 'putchar'. Output
drivers need to provide at least one of the two ('write' is preferred if
available). The CBMEM console driver is ported as a proof of concept
(since it's our most performace-critical driver and should in theory
benefit the most from less function pointer invocations, although it's
probably still negligible compared to the big sprawling mess that is
printf()).
Even with this fix, the problem remains that printf() was written with
the putchar primitive in mind. Even though normal text already contains
an optimization to allow multiple characters at a time, almost all
formatting directives cause their output (including things like
padding whitespace) to be putchar()ed one character at a time.
Therefore, this patch reworks parts of the output code (especially
number printing) to all but remove that inefficiency (directives still
invoke an extra write() call, but at least not one per character). Since
I'm touching printf() core code anyway, I also tried to salvage what I
could from that weird, broken "return negative on error" code path (not
that any of our current output drivers can trigger it anyway).
A final consequence of this patch is that the responsibility to prepend
line feeds with carriage returns is moved into the output driver
implementations. Doing this only makes sense for drivers with explicit
cursor position control (i.e. serial or video), and things like the
CBMEM console that appears like a normal file to the system really have
no business containing carriage returns (we don't want people to
accidentally associate us with Windows, now, do we?).
BUG=chrome-os-partner:18390
TEST=Made sure video and CBMEM console still look good, tried printf()
with as many weird edge-case strings as I could find and compared serial
output as well as sprintf() return value.
Original-Change-Id: Ie05ae489332a0103461620f5348774b6d4afd91a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196384
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit ab1ef0c07736fe1aa3e0baaf02d258731e6856c0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I78f5aedf6d0c3665924995cdab691ee0162de404
Reviewed-on: http://review.coreboot.org/7880
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
These drivers need to be ready right away and never really fit into the
depthcharge driver model anyway.
CQ-DEPEND=CL:194063
BUG=None
TEST=Built and booted on nyan and peach_pit. Built for nyan_big, nyan_blaze,
and daisy.
BRANCH=None
Original-Change-Id: I9570dee53c57d42ef4cd956f66a878ce39a2dc20
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194057
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 26e18f680c93fc990a3d1057c164f19859634a9f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia2233e2bd821d8de8d2d57a9423aeb74be7efd93
Reviewed-on: http://review.coreboot.org/7224
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Nico Huber