The callers of the following functions assume the storage
area provided by the pointers is initialized. That's not the
case as these were just place holders.
- void acpi_create_intel_hpet(acpi_hpet_t * hpet);
- void acpi_create_serialio_ssdt(acpi_header_t *ssdt);
To fix this properly initialize the hpet entry, and just remove
the serialio_ssdt function entirely.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted through depthcharge on rambi. Noted no more
ACPI errors relating to invalid length.
Change-Id: If56ab033562ef2d755e9c9de42f507c95d291aba
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174716
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4917
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Add SATA driver for baytrail platform.
BUG=chrome-os-partner:23643
TEST=Manual, in dev mode. Verify on rambi that SATA disk is detected, and
kernel is found + booted.
Change-Id: I5c13e03203c8f26d233c7d10af8ff6812c460578
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174914
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4913
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
- Ungate display in PUNIT
- Set GSM to 64MB since 32MB is not supported in <C0 stepping
- Initialize power management registers in GTT
- Execute VBIOS if found
BUG=chrome-os-partner:23507
BRANCH=rambi
TEST=build and boot to dev screen via HDMI on rambi
Change-Id: Idb032c7ea7f16b651b4c921e3429a652fe663a5d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174922
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4907
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The reference code blob is needed to bootstrap
certain pieces of hardware in bay trail. Provide
the ability to run reference code by loading
the reference code as an rmodule.
Note that support for vboot verification and S3
resume is omitted from this commit.
BUG=chrome-os-partner:22866
BRANCH=None
TEST=Built and booted with refcode loading.
Change-Id: I30334db441a57f4d87b4de6fca0a9a48e1c05c05
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174426
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4898
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The PCU (platform controller unit) contains the
resources and IP blocks that used to reside in the
south bridge. Bay Trail has since renamed it south
cluster. There are quite a few fixed MMIO and I/O
resources. If these aren't added the resource allocator
will freely assign these addresses which causes conflicts
and other subtle bugs.
BUG=chrome-os-partner:23544
BUG=chrome-os-partner:23545
BRANCH=None
TEST=Built and booted through depthcharge. Verified
resource allocation not weird. And no more depthcharge
crashes.
Change-Id: I697fbda4538c03fded293bcb63a5823b1ed150ec
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174421
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4893
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Initialize SMM on all CPUs by relocating the SMM region
and setting SMRR on all the cores. Additionally SMI
is enabled in the south cluster.
BUG=chrome-os-partner:22862
BRANCH=None
TEST=Built and booted rambi. Tested with DEBUG_SMI and noted
power button turns off board while in firmware.
Change-Id: I92e3460572feeb67d4a3d4d26af5f0ecaf7d3dd5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173983
Reviewed-on: http://review.coreboot.org/4892
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Bring up the APs using x86 MP infrastructure.
BUG=chrome-os-partner:22862
BRANCH=None
TEST=Built and booted rambi. Noted all cores are brought up.
Change-Id: I9231eff5494444e8eb17ecdc5a0af72a2e5208b5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173704
Reviewed-on: http://review.coreboot.org/4889
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Bay Trail has the following types of resets it supports:
- Soft reset (INIT# to cpu) - write 0x1 to I/O 0x92
- Soft reset (INIT# to cpu)- write 0x4 to I/0 0xcf9
- Cold reset (S0->S5->S0) - write 0xe to I/0 0xcf9
- Warm reset (PMC_PLTRST# assertion) - write 0x6 to I/O 0xcf9
- Global reset (S0->S5->S0 with TXE reset) - write 0x6 or 0xe to
0xcf9 but with ETR[20] set.
While these are documented this support currently provides support
for 2nd soft reset as well as cold and warm reset.
BUG=chrome-os-partner:23249
BRANCH=None
TEST=Built and booted.
Change-Id: I9746e7c8aed0ffc29e7afa137798e38c5da9c888
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172710
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4878
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This commit always selects COLLECT_TIMESTAMPS and starts
tracking TSC values from the early stages of bootblock.
The initial timestamp value is saved in mm0 and mm1 while
in bootlbock. This approach works because romcc is not configured
to use mmx registers for its compilation.
Additionally, the romstage api with the mainboard was changed to
always pass around a pointer to a romstage_params structure as the
timestamps are saved in there until ram is up.
BUG=chrome-os-partner:22873
BRANCH=None
TEST=Built and booted with added code to print out timestamps at
end of ramstage. Everything looks legit.
Change-Id: Iba8d5fff1654afa6471088c46a357474ba533236
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170950
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4856
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
During ramstage, call mainboard_get_gpios to get initial GPIO configuration
from the mainboard code, then initialize GPIOs as requested.
BUG=chrome-os-partner:22863
TEST=Manual. Using bayleybay GPIO table, set UART GPIOs to 'function 1',
and verify UART still works after GPIO configuration. Also, verify
legacy GPIO config is functional by toggling test pin.
Change-Id: Ic58d8ddd15c4dc48a751a83f6d26c7809c1efc42
Reviewed-on: https://chromium-review.googlesource.com/170306
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4855
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The pattrs structure is intended for the supporting coreboot
code to reference instead of going back to the source of
the values (msrs, cpuid, etc). It essentially serves as a global
structure for collecting attributes about the platform/processor.
Additionally, the implementation provides a point during boot to
hoook work before device enumeration/initialization by providing
a init() function to soc_intel_baytrail_ops that is called before
device work in the boot state machine.
BUG=chrome-os-partner:22862
BUG=chrome-os-partner:22863
BRANCH=None
TEST=Built and booted. Noted pattrs output.
Change-Id: I073da8aca29635146fb0d4a2625b2b7564fd8414
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170403
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4854
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Prior to this commit the coreboot resource allocator
was not using proper addresses. That's not surprising there
wasn't any code to initialize the resources properly. This
commit initializes the memory map accoring to the BUNIT
registers.
BUG=chrome-os-partner:22860
BUG=chrome-os-partner:22862
BRANCH=None
TEST=Built and booted. Noted output for resource assignments
is sane.
Change-Id: Ice8d067d8b993736de5c5b273a0f642fa034a024
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170429
Reviewed-on: http://review.coreboot.org/4852
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The initial Bay Trail code is intended to support
the mobile and desktop version of Bay Trail. This support
can train memory and execute through ramstage. However,
the resource allocation is not curently handled correctly.
The MRC cache parameters are successfully saved and reused
after the initial cold boot.
BUG=chrome-os-partner:22292
BRANCH=None
TEST=Built and booted on a reference board through ramstage.
Change-Id: I238ede326802aad272c6cca39d7ad4f161d813f5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168387
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4847
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
