Coverity detects that value assigned to variable "ret" is overwritten
before it is used. Fix the issue by returning right value.
Found-by: Coverity CID 1255942, 1241836
TEST=None
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I2e1fb5400ff64c6178bb30601896780f8d67b5c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44185
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This CPU variant has a different CPUID signature.
Change-Id: Ice2c1b86382e5d91d9eda717e6522ed0a9c2229f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
libpayload's drivers keep growing. With certain hardware/payload
combinations (last time witnessed with Kontron/bSL6 and FILO), the
default configuration runs out of memory.
As there is a lot enabled by default, also set a big default heap size.
Tested with FILO on QEMU/Q35.
Change-Id: I51a1514097aeb8b3c835a2387db66869b81d0bcc
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This patch updates the SLP_Sx assertion widths and power cycle duration
for the Japerlake RVP.
Power cycle duration:
With default value,
S0->S5 -> [ ~4.2 seconds delay ] -> S5->S0
With value set to 1,
S0->S5 -> [ ~1.2 seconds delay ] -> S5->S0
BUG=b:159104150
TEST=Verified that the power cycle duration is ~1.2s with global
reset on JSLRVP.
Change-Id: Ie2a8d959d7ebbf9c24f8c4e8d5c68b70e0ac5708
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
This patch updates the SLP_Sx assertion width and power cycle duration
for the dedede platforms.
Power cycle duration:
With default value,
S0->S5 -> [ ~4.2 seconds delay ] -> S5->S0
With value set to 1,
S0->S5 -> [ ~1.2 seconds delay ] -> S5->S0
BUG=b:159104150
TEST=Verified that the power cycle duration is ~1.2s with global
reset on waddledoo.
Change-Id: I7079cbd564288b5d5b69e07661434439365063d3
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Initialize watch dog so the system won't reboot on timeout.
In addition, print the reason of reboot triggered by watch dog.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I7e849659700218f1c50365c2d68a32be2f703d94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Initialize CPU mmu and config range.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I5ba405dab87d51d373704657ccb44c07c7249041
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Those flags already get unconditionally set in soc/amd/picasso/acpi.c.
Change-Id: I978c7d67480499d92c193d5bb87bc876211187db
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Two of the items in the FADT ACPI table frequently are partially board-
specific, so let's make it easy to update them via devicetree settings.
- fadt_boot_arch 0="legacy free" which while reasonable, probably isn't
what will be wanted by most mainboards, so this should generally get
updated in the specific devicetree.
- In fadt_flags all chipset-specific flags get set while the mainboard
has to set all other flags that it needs to have set.
This patch changes the default for fadt_boot_arch.
Change-Id: I6e8d0c60cadfdd24b6926703b252abbc56d436de
Signed-off-by: Martin Roth <martinroth@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The DISPLAY_3D class is for graphics devices that are not connected to
displays. This includes GPUs implementing muxless Nvidia Optimus.
According to CB:31502, some AMD GPUs are identified as DISPLAY_OTHER.
Therefore, consider the entire DISPLAY class as GPUs.
Change-Id: I0f203a013c010337ae7a9fddbd13330f380050a4
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Xeon-SP Skylake Scalable Processor can have 36 CPU threads (18 cores).
Current coreboot SMM is unable to handle more than ~32 CPU threads.
This patch introduces a version 2 of the SMM module loader which
addresses this problem. Having two versions of the SMM module loader
prevents any issues to current projects. Future Xeon-SP products will
be using this version of the SMM loader. Subsequent patches will
enable board specific functionality for Xeon-SP.
The reason for moving to version 2 is the state save area begins to
encroach upon the SMI handling code when more than 32 CPU threads are
in the system. This can cause system hangs, reboots, etc. The second
change is related to staggered entry points with simple near jumps. In
the current loader, near jumps will not work because the CPU is jumping
within the same code segment. In version 2, "far" address jumps are
necessary therefore protected mode must be enabled first. The SMM
layout and how the CPUs are staggered are documented in the code.
By making the modifications above, this allows the smm module loader to
expand easily as more CPU threads are added.
TEST=build for Tiogapass platform under OCP mainboard. Enable the
following in Kconfig.
select CPU_INTEL_COMMON_SMM
select SOC_INTEL_COMMON_BLOCK_SMM
select SMM_TSEG
select HAVE_SMI_HANDLER
select ACPI_INTEL_HARDWARE_SLEEP_VALUES
Debug console will show all 36 cores relocated. Further tested by
generating SMI's to port 0xb2 using XDP/ITP HW debugger and ensured all
cores entering and exiting SMM properly. In addition, booted to Linux
5.4 kernel and observed no issues during mp init.
Change-Id: I00a23a5f2a46110536c344254868390dbb71854c
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Simplify some if-blocks which are used for the configuration, enablement
and disablement of the PEG devices.
This changes the logic of the code, since it configures PegxEnable
before the if-blocks, where x is the number of the PEG device, and the
further configuration of the PEG devices depends on the enablement of
PegxEnable.
Change-Id: I6dd88ce752ce8f0255c424d0e5b2d8ef918885a1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Move InternalGfx config option out of the if-else-block and replace the
left over config option IgdDvmt50PreAlloc by a ternary expression. Also,
adjust related code comments to fit the new logic of this code.
This changes the logic of the code, since InternalGfx is configured
first and IgdDvmt50PreAlloc depends on its value. The negation in the
ternary expression is removed to improve the readability.
Change-Id: I89ff17f4574a7ade228c1791f17ea072fb731775
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
* Add support for loading GDT on x86_64.
* Add x86_64 assembly code to do the same as the x86_32 code.
* Separate x86_32 and x86_64 code.
Tested on qemu x86_32 and x86_64 using additional MTRRs.
Tested on Lenovo T410 with additional x86_64 patches.
Change-Id: I1c190627f5f0ed6f82738cb99423892382899d7b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30500
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TBT ports should be disabled if the DB is a USB3 DB. It is assumed if
the DB doesn't support USB4 the platform as a whole should only be USB3
capable and TBT functionality on both ports should not be enabled.
BUG=NONE
BRANCH=NONE
TEST=Built coreboot and verified that TBT was disabled on platform with
USB3 DB and enabled on platform with USB4/TBT DB
Change-Id: I594f2e9483aaf896de2b6aea9a3460bd3826c58c
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
When CSE Lite jumps from RO to RW, global reset is initiated. When AP is
reset as part of global reset, TPM initialization fails. This is because
AP reset is not detected by TPM hosting an older firmware version. Request
Embedded Controller (EC) to perform AP reset so that TPM can detect that
event.
BUG=b:162290856, b:162386991
TEST=Ensure that the device boots to OS with the board-specific reset
sequence when CSE Lite jumps from RO to RW with an older and newer Cr50
firmware.
Cq-Depend: chromium:2337430
Change-Id: Ib1f7271130e0b4b68c7f0917ecc4eadba1486206
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add a helper function to initiate AP reset through Embedded Controller
(EC).
BUG=b:162290856
TEST=Ensure that the EC resets AP on boards where the command is
supported.
Change-Id: I01d7dfec72a8a3f6d2c4844bc062672e494860d8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44188
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When CSE Lite jumps from RO to RW, global reset is initiated. When AP is
reset as part of global reset, in some boards TPM initialization fails.
This is because AP reset is not detected by TPM hosting an older firmware
version. To signal TPMs running older firmware version about AP reset, a
modified reset sequence needs to be performed. Hence add support to
perform board-specific reset sequence.
BUG=b:162290856, b:162386991
TEST=Ensure that the device boots to OS with the board-specific reset
sequence when CSE Lite jumps from RO to RW with an older and newer Cr50
firmware.
Change-Id: I8663e7f25461e58e45766e2ac00d752bfa191d8b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44187
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested=On OCP Delta Lake, BMC SOL can see POST codes
Change-Id: I2c27055475e6dadcd4282cd1bf191a1b83150f02
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Set default value of ModPhyIfValue parameter in FSPS_UPD.
Without this setting, it will be set to '0' and system may not detect
USB 3.0 device.
BUG=b:163382089
BRANCH=firmware-octopus-11297.B
TEST=Built
Change-Id: Ide3d1637f99dba28251102f771b6ce370cc5d8e4
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Per the datasheet and the it87 kernel driver, the IT8728F supports
both 5 fans (vs 3) and use of a single 7-bit register for the
PWM slope (5 bits in closed-loop mode).
Change-Id: I3d1e6f5030f18d2c8ff533965ae4718be0f3c279
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add support for tachometer closed loop mode, and programming
of initial RPM vs initial PWM value.
Change-Id: Idff29331c979f8518021103b6f8d19e75e657e3a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Currently sku_id is used to enable/disable eMMC as boot media on
Dalboz. This patch will check eMMC bit in firmware configuration
table to enable/disable eMMC.
On Dalboz Proto and EVT devices with eMMC, there was an issue found
after SMT. This patch checks for board_version instead of SKU_ID to
configure eMMC in HS200.
Configure HDMI based on daughterboard_id in FW_CONFIG.
BRANCH=none
BUG=b:152817444
TEST=Check eMMC is enabled or disabled based on the eMMC bit in
FW_CONFIG.
Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Change-Id: Ifa2a49a754d85fb6269f788c970bd9da58af1dad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently SKU_ID is used to enable/disable eMMC as boot media on
Ezkinil. This patch will check eMMC bit in firmware configuration
table to enable/disable eMMC.
BRANCH=none
BUG=b:162344105
TEST=Check eMMC is enabled or disabled based on the eMMC bit in
FW_CONFIG.
Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Change-Id: I62318cf71ec70790f2d9e787febd1e0b787741fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
After confirming that all zork variants and phases have valid
FW_CONFIG value in CBI, this patch is dropping FW_CONFIG validity checks
like VARIANT_HAS_FW_CONFIG and VARIANT_BOARD_VER_FW_CONFIG_VALID in Kconfig
and will also remove associated helper functions.
BRANCH=none
BUG=b:162344105,b:152817444
TEST=Check if FW_CONFIG bits can be read in coreboot and FW_CONIFG helper
function do not return 0 if board has a valid FW_CONFIG in CBI.
Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Change-Id: I633dc7c500ef8759f3fffb0db6b76d96257c3c9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Similar to set_blend(), add set_color_map() for mapping background and
foreground colors of a bitmap. Also add clear_color_map() for clearing
the saved color mappings.
Note that when drawing a bitmap, the color mapping will be applied
before blending.
Also remove unnecessary initialization for static variable 'blend'.
BRANCH=puff
BUG=b:146399181, b:162357639
TEST=emerge-puff libpayload
Change-Id: I640ff3e8455cd4aaa5a41d03a0183dff282648a5
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch sets the GPP_H1 to PAD_CFG_GPO which is general
purpose output with no pullup/down. We need this GPIO for
the detection of soundcard in TGL RVP's.
BUG=none
BRANCH=none
TEST=Build and boot tglrvp successfully. From "aplay -l"
output check that soundcards are listed properly.
Change-Id: Ic0ef33079af7940360c986efacabd6d367aad516
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
To be consistent with the rest of the tree, replace all left ternary
expressions, which are used for device enablement / disablement,
with `dev && dev->enabled`.
Change-Id: Ie7afa48bf2c8bdad5a043f7cb6953d05b7b6597d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
The port is based on the F2A85-M, the main differences are:
- 2 DDR3 dimms
- 2 PS/2 ports
- 2*USB2.0 and 2*USB3.0 ports
- 3+2 phase VRM
- 6 channel audio
- 6 SATA ports
- ASP1206 VRM controller
- Bolton D4 chipset
- no optical SPDIF/IO
Successfully booted configurations:
-RAM: 2*8GB Kingston KVR 1333Mhz LP, 2*8GB Crucial BLT8G3D1869DT1TX0
-CPU: AMD A8-6500 (Richland), AMD A10-6700 (Richland)
-OS: Arch Linux 4.19 (SATA, USB), Linux Mint 19.3, Artix Linux 2019
-SeaBIOS: 1.12 and 1.13
Known problems:
- IRQ routing is done incorrect way - common problem of fam15h boards
- Windows 7 can't boot because of the incomplete ACPI implementation
Change-Id: I60fa0636ba41f5f1a6a3faa2764bf2f0a968cf90
Signed-off-by: Balazs Vinarz <vinibali1@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30987
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
soc/amd/picasso selected FSP_USES_CB_STACK even though it is FSP 2.0
based, so it doesn't reuse coreboot's stack, but sets up its own stack.
In contrast to all other FSP 2.0 based platforms, this stack isn't in
the CAR region, since AMD Picasso doesn't support CAR and the DRAM is
already available when the x86 cores are released from reset. Selecting
FSP_USES_CB_STACK ended up doing the right thing, but is semantically
wrong. Instead of wrongly selecting FSP_USES_CB_STACK in soc/amd/picasso
we take the corresponding code path if ENV_CACHE_AS_RAM is false which
is only the case for non-CAR platforms.
BUG=b:155501050
TEST=Timeless build results in an identical binary for amd/mandolin,
asrock/h110m-dvs and intel/coffeelake_rvp11 which cover all 3 cases
here.
Change-Id: Icd0ff8e17a535e2c247793b64f4b0565887183d8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Elyes HAOUAS