None of these functions are used outside of the files they are defined
in, so they can all be static.
Change-Id: Ie00fef5a5ba2779e0ff45640cff5cc9f1d096dc1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
At least one channel must be present, so print an error if there is
not. However, we cannot always assume it will be the first channel,
so make the appropriate selection when printing the timings.
Found-by: Coverity Scan #1370{584,585,588,589,590-596,600}
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I6b59989242e498474782876302e0850e3e4cf2d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Sunrise Point-LP is used on Skylake and KabyLake platforms,
but the PCH IDs differ.
This commit adds the PCH IDs for Skylake mobile platforms
and renames the Kabylake macros to distinguish them.
Used Intel documents:
- 332995-001EN (I/O datasheet vol. 1)
- 332996-002EN (I/O datasheet vol. 2)
Change-Id: Id46224fcc44b06c91cbcd6c74a55c95e1de65ec6
Signed-off-by: Felix Singer <migy@darmstadt.ccc.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Both values in each array are only initialized if
`two_channels` is true, so we need to check that first.
Found-by: Coverity Scan #1370{584,585,588,589,590-596,600}
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I592bc6ae00f834f74a61668d7a3919014ec635f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Values from
- Intel doc 337347 rev4
- coreboot soc/intel/cannonlake/include/soc/gpio_soc_defs_cnp_h.h
On Coffeelake H (using Cannonlake / Cannonpoint PCH) p2sb is not
accessible. Using a static value instead. 0xfd000000 is a common value
chosen by coreboot and non-coreboot firmware.
Change-Id: Id637f703ab0a99eb0908ecdc3da27ba80db1c6b8
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Apollo Lake has four GPIO communities each with a single group named
after the physical location of the pads (I guess): North West, North,
West and South West.
Also add some logic to be able to tag the default function of a pad
(with an asterisk before its name). This seems easier to review in the
tables, but we could also encode the number of the default explicitly
instead.
Used Intel documents:
- 334817-001 (datasheet vol. 1)
- 334819-001 (datasheet vol. 3)
Change-Id: I5cd687fdc1d2ae81f2e948178bf319897b47f031
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Felix Singer <migy@darmstadt.ccc.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Fixes getting a dump of GPIO registers for these devices.
Change-Id: I80f05a170152969ba45d6aee33ab7ed5296ee496
Signed-off-by: Shaleen Jain <shaleen@jain.sh>
Reviewed-on: https://review.coreboot.org/c/30604
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The P2SB (PCI to Side-Band) bridge is on a different PCI device on APL.
Hence, we have to decide based on the LPC ID which device to query.
Also fix a comment.
Change-Id: Ie20d7d2d246629d085bcf4740ba28b1e81e6a12a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29896
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some Unix systems (GuixSD, NixOS) do not install programs like
Bash and Python to /usr/bin, and /usr/bin/env has to be used to
locate these instead.
Change-Id: I7546bcb881c532adc984577ecb0ee2ec4f2efe00
Signed-off-by: Yegor Timoshenko <yegortimoshenko@riseup.net>
Reviewed-on: https://review.coreboot.org/28953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The GPIO register dumper code for the LynxPoint family PCH chips
(Intel 8 Series and C220 Series) was incorrectly using a
shortened version of the LynxPoint-LP GPIO register map.
Switched to the correct register map for the affected chipsets.
Change-Id: I394a198bbb6628915cb73cabc5c8ff808579a07f
Signed-off-by: Fehér Roland Ádám <feherneoh@gmail.com>
Reviewed-on: https://review.coreboot.org/29167
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Descriptions are taken from the files themselves or READMEs. Description
followed by a space with the language in marked up as code.
Change-Id: I5f91e85d1034736289aedf27de00df00db3ff19c
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
SoCs from Skylake on have many settings as so called private con-
figuration registers (PCRs). These are organized as 256 ports with
a 64KiB space each. We use the Primary to Sideband (P2SB) bridge's
BAR to access them.
Change-Id: Iede4ac601355e2be377bc986d62d20098980ec35
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19593
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The registers were taken from the wrong addess since the spibar offset
was not added to it.
This also fixes the endianness.
Change-Id: I8bb91517770359599fe5f579c4686434da8d1c27
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23478
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Primary to Sideband Bridge (P2SB) is the interface to Private Con-
figuration Registers (PCR) including GPIO configuration. Of course,
access is restricted to Intel partners and criminals, so the PCI device
is hidden from the OS. Probably we only need to fetch the SBREG_BAR
address and can hide the PCI device again after that.
Change-Id: Ic121a09f021708aab82ae4b9d76d6c3c6fb884fa
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the 8086:191f North/Host Bridge to the list of definitions.
Adding the definiton makes the Northbridge get recognized by inteltool.
It is found in the Intel i5-6600K CPU:
https://ark.intel.com/products/88191/Intel-Core-i5-6600K-Processor-6M-Cache-up-to-3_90-GHz
Change-Id: Id746d1e8b3bb90b3b68a2f6c372890671dd61b5f
Signed-off-by: Christoph Pomaska <cp_public@gmx.de>
Reviewed-on: https://review.coreboot.org/23055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Falling through is intended here, so add a comment that GCC will notice
and stop warning about this.
Change-Id: I12637b6bc18844a3bc47f06208df7fee7a4feb3b
Found-by: gcc-7 (Debian 7-20170316-1) 7.0.1 20170316 (experimental) [trunk revision 246203]
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/18906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Omar Pakker
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Both registers behave the same as on the previous generation
Taken from
* 6th Generation Intel Processor Families for S-Platform
Volume 2 of 2
* Page 55 and 62
* 332688-003EN
Change-Id: Id02a38a7ab51003c9d0f16ebb2300a16b66a15f9
Signed-off-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/22350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Register definitions were taken from
* 6th Generation Intel Processor Families for S-Platform Volume 2 of 2
* Page 117
* 332688-003EN
As well as
* 6th Generation Intel Processor Families for H-Platform Volume 2 of 2
* Page 117
* 332987-002EN
Tested on a 6th gen skylake mobile cpu and capability registers do match up
with the default values.
Change-Id: I636f6c3d045e297f1439d3e88e43f41e03db4c8e
Signed-off-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/22345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Passing a string containing output from strerror() to perror() causes
double error message display. It is also causing segfaults when the
error message is longer than temp_string capacity.
To fix the problems, sterror() call has been removed so the error
message is printed only once. This could be enough to avoid segfaults,
but it is a good practice to limit output size with snprintf().
Change-Id: I5ccc37e404f278cafae0a451c5acaa27d7907cce
Signed-off-by: Maciej Suminski <maciej.suminski@cern.ch>
Reviewed-on: https://review.coreboot.org/21025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add support for dumping Intel Software Guard Extension (SGX)
status. --sgx or -x is the command line switch to get SGX status.
The code iterates through all cores and reads MSRs to check if SGX is
supported, enabled and the feature is locked.
Change-Id: I1f5046c1f6703f5429c8717053ffe9c981cedf6f
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/20758
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Separate the required CPPFLAGS from environment overridable CFLAGS.
Change-Id: I0c1c0a1cebc7f7971634bf57d4a2370939c43fda
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The coreboot sites support HTTPS, and requests over HTTP with SSL are
also redirected. So use the more secure URLs, which also saves a
request most of the times, as nothing needs to be redirected.
Run the command below to replace all occurences.
```
$ git grep -l -E 'http://(www.|review.|)coreboot.org'
| xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g'
```
Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/20034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The SATA device moved from 0:1f.2 to 0:17.0, 0:1f.2 became PMC. We
detect that by checking the PCI device class.
The ABAR MMIO space has grown to 2KiB and up to 8 ports are supported
now. For backwards compatibility, only dump port registers of ports
that are enabled in the Ports Implemented (PI) register.
Change-Id: I8e0f07d7359d92f689882b5afefa5ffb3766ee8b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have to call pci_free_dev() for each device we allocated with
pci_get_dev(). Since that's not the case for `sb`, we can close
this TODO.
Change-Id: I1ef80c837263a205467f835156dcb8fa667d3a8f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is supposed to fill the `size[]` array with the actual sizes of
a device' MMIO ranges, but apparently isn't implemented for every
access method in libpci (we let the library choose one). It tells us
by clearing `PCI_FILL_SIZES` in the return value of `pci_fill_info()`
(which we don't check). Since we don't ever use `size`, we can just
make it clear and don't ask for it.
Change-Id: I3fb9334472f1c7563a9e17910190f73affbe067a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The Wildcat Point-LP Premium is handled the same as the Wildcat Point-LP,
but it wasn't supported by inteltool.
Change-Id: I694514e1963f074582a3f5f81d63c20e7fa49189
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19445
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Lint prevents my next commit which adds a new line to the table
so it's better to break all the > 80 character lines so it will be
consistent with the new line I'm about to add.
Change-Id: Ic7ad0cb90e861cd830db1186225d4f839250792a
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19444
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Without this change inteltool cannot read BIOS_CNTL values nor can it
read the SPIBAR values.
Change-Id: I9ff16e060aca66e3cb11c8315a6843ccecd1d3c2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17979
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Jacob Garber