Commit Graph

32016 Commits

Author SHA1 Message Date
Edward O'Callaghan 7899cd9088 mb/google/hatch/variant/kohaku: Fix Kohaku baseboard/gpio.c mux comments
Follow MEM_STRAP_* comment style to be consistent with other boards.

BUG=b:144809606
BRANCH=hatch
TEST=./util/abuild/abuild -p none -t google/hatch -x -a

Change-Id: I4945f676f307af9b8c0baa1fbcaf33113de647c3
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37592
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-25 07:24:50 +00:00
Edward O'Callaghan c735a31861 mainboard/google/hatch: Move gpio GPP_H3 config up from baseboard
The baseboard GPIO table definitions are too straineous to the extend
that variants need to redefine assumptions back to NC. Invert this so
that baseboard by default assumes the safer NC and move the specific
board configurations to their respective places.

This patch handles the GPP_H3 gpio config for easier review. This
toggles the MAX amp which not all boards have. Move the pin
configuration to boards with the respective devicetree configuration
following on from the theme of commit b417786525.

BUG=b:142094759
BRANCH=none
TEST=builds

Change-Id: Iefd2223af79a13c8a42d07bc10b2772dbff6d3e5
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25 07:24:17 +00:00
Edward O'Callaghan 3dbe593906 mainboard/google/hatch: Move gpio GPP_C* NC down into baseboard
The baseboard GPIO table definitions are too straineous to the extend
that variants need to redefine assumptions back to NC. Invert this so
that baseboard by default assumes the safer NC and move the specific
board configurations to their respective places.

This patch handles the GPP_C15 group for easier review.

BUG=b:142094759
BRANCH=none
TEST=builds

Change-Id: I578245e24895d361d80ad016a4f18204e2b6e1ca
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25 07:16:23 +00:00
Edward O'Callaghan c4a3f51618 mainboard/google/hatch: Move gpio GPP_A* NC down into baseboard
The baseboard GPIO table definitions are too straineous to the extend
that variants need to redefine assumptions back to NC. Invert this so
that baseboard by default assumes the safer NC and move the specific
board configurations to their respective places.

This patch handles the GPP_A* group for easier review.

BUG=b:142094759
BRANCH=none
TEST=builds

Change-Id: I29b4323ac80b1288b2562846217c4f377714fc2c
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25 07:04:02 +00:00
Kangheui Won 60889e55ea mainboard/variant/puff: set PL values for puff
To be safe for now, don't differentiate between SKUs and use lower
values to ensure board won't be browned out.

BUG=b:143246320
TEST=none
BRANCH=none

Change-Id: I041ebaa33bf2582386198290e625099ba8e2f3c9
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37651
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-24 23:37:20 +00:00
Raul E Rangel 028570b445 vendorcode/amd/pi/Kconfig: Add prompt to pre/post pi files
This allows the values to be set in a .config

BUG=none
TEST=Was able to set the value from a .config and built careena firmware

Change-Id: I757e4b9a0b80ff42c1f49143a44f15550366fd0b
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37879
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-24 16:33:29 +00:00
Edward O'Callaghan b417786525 mainboard/google/hatch: Remove MAX98357A assumption from baseboard
Generally work towards a more loose baseboard definition by moving out
some original assumptions to be board specifics. Specifically Puff does
not have the MAX98357A speaker amp and enabling the driver winds up
generating incorrect SSDT tables that confuse the kernel. Since
devicetree inherits the chip from device node in base and an override
will also inherit the chip and thus dispatch the unwanted fill_ssdt fn
call.

V.2: lean on linker to drop max98357a driver when not in dt.

BRANCH=none
BUG=b:146519004
TEST=./util/abuild/abuild -p none -t google/hatch -x -a

Change-Id: I8e7fed69a4c6d9610ac100da6bae147828ebfa81
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37909
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-24 00:08:42 +00:00
Edward O'Callaghan 295fdbef39 mainboard/google/puff: Configure HDA registers
Enable PCH HDA and configure dmic+ssp registers.

BRANCH=none
BUG=b:146519004
TEST=./util/abuild/abuild -p none -t google/hatch -x -a

Change-Id: If9495261201ca256cdb35352338c0b3a82a50196
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-12-23 22:09:48 +00:00
Edward O'Callaghan e8b7ff1ab5 mainboard/google/puff: Enable func0 of 1c for nic
Two things here:

 i. ) FSP requires that function 0 be enabled whenever any non-zero
      functions hang under the same bus:device.

 ii.) FSP reorders function 6 RP to be function 0 if function 0 is
      indeed unused.

BUG=b:146437819
BRANCH=none
TEST=none

Change-Id: I0f499a23495e18cfcc712c7c96024433a6181a4c
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-23 22:09:08 +00:00
Patrick Rudolph 95bff2e17e superio/common: Add more ACPI methods
* Make use of introduced SSDT config mode access
* Make use of introduced SSDT mutex
* Provide ACPI functions to safely access SIO config space
* Implement method to query LDN enable state
* Implement method to set LDN enable state
* Use introduced functions to implement _DIS and _STA in the device
* Update documentation

Tested on Aspeed AST2500 and Linux 5.2.
Manually verified ACPI code that generates no errors in Linux.

Change-Id: I520b29de925f368cd71ff8f1f58d2d57d72eff8d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-22 13:47:55 +00:00
Patrick Rudolph 7db16ddc88 superio/common/conf_mode: Add op to write SSDT
Add functions to write ACPI SSDT code for entering and leaving
the config mode.
To be used by ACPI generators.

Tested on Linux 5.2 using the Aspeed SSDT generator.

Change-Id: I14b55b885f1c384536bafafed39ad399639868e4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-22 13:47:39 +00:00
Angel Pons 0142d441c6 mb/**/dsdt.asl: Remove "Some generic macros" comment
It provides no useful information, so it might as well vanish.

Change-Id: I0df6f4639a16058486c2e2d40fe4067d65670731
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-21 11:38:16 +00:00
Kyösti Mälkki 282717e5cc sb/amd/{agesa,pi,cimx}/bootblock: Use simple PCI config accessor
Change-Id: I5e1f2ceda37927d7a75660affee8504f9f8aff15
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37597
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-21 11:37:15 +00:00
Kyösti Mälkki b915faedd5 sb/amd/{agesa,pi}/hudson: Use simple PCI config accessor
Change-Id: I3d8e21e17a0f870d854694e326b10f7d2d04e5ad
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37596
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-21 11:37:07 +00:00
Kyösti Mälkki 520717dff1 AGESA,binaryPI: Drop remains of ROMCC_BOOTBLOCK
Change-Id: I507ac6d483d9854852d6d01f10544c450b8d33cc
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37440
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20 18:14:34 +00:00
Elyes HAOUAS b9bd69e70e src/mainboard: Remove unused '#include <device/pci.h>'
Change-Id: I5791fddec8b2387df5979adbb1a0fa64c5dd23ea
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-20 17:59:59 +00:00
Elyes HAOUAS ed69de318f mainboard: Add missing include <device/pci_def.h>
Change-Id: I8a7c989540e8b62de7fd291f695adac849f4680c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-12-20 17:59:42 +00:00
Bill XIE cdf6f3a4ba security/vboot: Add a dedicated flag for building of vboot library
As discussed in CB:35077, since both measured boot and verified boot
depends on vboot library, it had better to introduce a dedicated flag
CONFIG_VBOOT_LIB to control the building and linking of the vboot
library, and make other flags needing vboot library select it. Only
the actual verification stuff should be conditional on CONFIG_VBOOT.

Change-Id: Ia1907a11c851ee45a70582e02bdbe08fb18cc6a4
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
2019-12-20 17:58:44 +00:00
Maulik V Vaghela e9b1e0fe88 soc/intel/tigerlake: Update FSP stack and heap size
Tigerlake and Jasperlake fsp requires stack size to be minimum 192 KiB
and heap size to be minimum 128 KiB.
Updating both Kconfig to meet size requirements.
Also updated required CAR region size during boot block due to increment
in stack & heap requirement by fsp

Change-Id: I38e93b5986811ff3e0a8df5f4f36af35f308cb6b
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37764
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20 17:57:17 +00:00
Huayang Duan 6ee5559d6a soc/mediatek/mt8183: Use DDR clock to compute Tx delay cell
The delay cell result should use DDR clock PLL rate for computation,
and should not be divided by 2.
This helps to improve DRAM stability.

BUG=b:80501386,b:142358843
BRANCH=kukui
TEST=Boots correctly on Kukui

Change-Id: Idf5cce206e248bb327f9a7d27c4f364ef1c68aa1
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-20 17:57:03 +00:00
David Wu 6de7ecb585 mb/google/hatch/var/kindred: Decrease i2c frequency below 400 KHz
Before tuning i2c frequency,
I2C0: 479.4 KHz
I2C1: 491.4 KHz
I2C4: 476.4 KHz

After tuning i2c frequency,
I2C0: 391.8 KHz
I2C1: 396.4 KHz
I2C4: 388.8 KHz

BUG=b:146535585
BRANCH=hatch
TEST=emerge-hatch coreboot chromeos-bootimage

Change-Id: I55d095efb60eba4e860b54bb90e8e0df62d88419
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37831
Reviewed-by: Philip Chen <philipchen@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20 17:56:06 +00:00
Wisley Chen 9ac409c7e5 mb/google/hatch/var/jinlon: Config WWAN_RESET
jinlon supports LTE, so remove WWAN_RESET NC configuration

BUG=none
TEST=emerge-hatch coreboot

Change-Id: Ibc5d21f0a33952f519265a5ce2df559a79346d9e
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37837
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20 17:55:36 +00:00
Michał Żygowski 727ac0d263 AMD {SoC, AGESA, binaryPI}: Don't use both of _ADR and _HID
PCI devices starting from 18 are processor configuration devices for each
node and are not a bus itself.

According to ACPI specification 6.3 section 6.1.5:

"... _HID object must be used to describe any device that will be
enumerated by OSPM. OSPM only enumerates a device when no bus enumerator
can detect the device ID. ... Use the _ADR object to describe devices
enumerated by bus enumerators other than OSPM."

PCI device 18 with its functions has a standard enumerator, which is PCI
enumerator so it needs a _ADR. Create a separate ACPI device for the
processor configuration space. This fixes the ACPI compliance problem
from CB:36318.

Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie7b45ce8d9e4fdd80d90752bf51bba4d30041507
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37835
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20 17:54:42 +00:00
Elyes HAOUAS a87a741b41 crossgcc: Upgrade Python to version 3.8.1
Change-Id: I2867d62d2e6f5ca1e97ce52ecc45a794b4831686
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-20 17:51:49 +00:00
Kyösti Mälkki bba4ec4ca1 superio/smsc/lpc47m10x: Expose pnp_enter/exit_conf_state
Change-Id: I55915b63dbb097634a228193f62395e45a1f42fe
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-12-20 17:51:10 +00:00
Wim Vervoorn f863176423 mb/facebook/fbg1701: Correct typo in hda verbs
The MIC1 NID is configured incorrectly because of a typo. The value is 7
digits instead of 8. This is corrected by this patch.

No issues are known because of this (the MIC is not connected).

BUG=N/A
TEST=build

Change-Id: Ia12f3be7d7262829cce3400a8535a33ea1c54b78
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-20 17:50:54 +00:00
Wim Vervoorn 67117c3971 {drivers,soc}/intel/fsp1_1: Move chipset specific logo handling to SoC
FSP logo handling used PcdLogoPtr and PcdLogoSize which are elements of
the chipset specific FSP structures.

Create soc_load_logo() which will pass the logo pointer and size.
This function will call fsp_load_logo which will load the logo.

BUG=NA
TEST= Build and verified logo is displayed on Facebook FBG1701

Change-Id: I86943e64ca1ddd05e7e88fc6b882cfd33b98272e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37791
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20 17:50:28 +00:00
Arthur Heymans 0e45b2875a arch/x86: Drop romcc bootblock
Change-Id: I79accbe1d5a554fea75fbd866995f385f718421a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-20 17:49:55 +00:00
Elyes HAOUAS ba9b504ec5 src: Replace min/max() with MIN/MAX()
Change-Id: I63b95144f2022685c60a1bd6de5af3c1f059992e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37828
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20 17:49:29 +00:00
Elyes HAOUAS 361a935332 {drivers,southbridge}: Replace min() with MIN()
This is to remove min/max() from <stdlib.h>.

Change-Id: Ica03d9aec8a81f57709abcac655dfb0ebce3f8c6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37818
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20 17:48:00 +00:00
Elyes HAOUAS f97c1c9d86 {nb,soc}: Replace min/max() with MIN/MAX()
Use MIN() and MAX() defined in commonlib/helpers.h

Change-Id: I02d0a47937bc2d6ab2cd01995a2c6b6db245da15
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37454
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20 17:46:37 +00:00
Kyösti Mälkki 836b8d2e45 drivers/pc80: Move normal/fallback mechanism outside __ROMCC__
Change-Id: I840885ca543375c77b7406434fd8bb4085e26938
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-20 17:44:43 +00:00
Eric Lai b2f3698781 libpayload/drivers/i8042: add error messages to i8042_probe
Print error message before error return for better debugging.

Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I52039dcab72c6295dfb6b887a7000a6d2bd050ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Mathew King <mathewk@chromium.org>
2019-12-20 17:43:17 +00:00
Kyösti Mälkki fedaac84da AGESA,binaryPI: Enable lapic early for udelay()
Change-Id: I7200ac0256748d9372fc39be27b86d1c93b38321
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-20 15:47:39 +00:00
Kyösti Mälkki fa0df7d316 AGESA fam14: Remove early PCI subsystem ID setting
Change-Id: Id4e95c68517b01647049b5cbd50bf5a3974a9c3a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-12-20 15:47:21 +00:00
Kyösti Mälkki b4f1ecb3c7 AGESA fam14: Remove early p-state setting
No improvement was measured with this applied.

Change-Id: I99166e03f2580828c66305326f5141d956707f08
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37754
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20 15:47:09 +00:00
Kangheui Won 40a1f70bb0 mainboard/google/puff: Add extra USB configuration
Adding extra USB configuration since Puff has different USB ports compared to hatch

BRANCH=none
BUG=b:146437609
TEST=none

Change-Id: I42ef6b6b718274953711c84ebe90971f108501fa
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-12-20 13:33:17 +00:00
Edward O'Callaghan b61f33cd48 mainboard/google/puff: Enable pcie7 ep in dt
Missing bus init for RTL8111H ethernet chip hanging on bus.

V.2: Include admendments from Kangheui.

BRANCH=none
BUG=b:146437819
TEST=./util/abuild/abuild -p none -t google/hatch -x -a

Change-Id: I22aba312f183ea05eeb81d326ca0c05ce340a2e8
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-20 07:23:34 +00:00
Edward O'Callaghan d4823664a8 mainboard/google/puff: Clean up dt for pci 15.2
Seems nothing special is needed here from coreboot.

V.2: Fix typo as well in speed map.

BRANCH=none
BUG=b:143047058
TEST=./util/abuild/abuild -p none -t google/hatch -x -a

Change-Id: Ief750f98677b2017af78fb0b5bc98e1492dedbe4
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-20 06:45:51 +00:00
Marshall Dawson 8f454fd2ea soc/amd/picasso: Reduce romstage.c
Remove the old Stoney Ridge postcar stack frame setup.  Reduce
romstage.c to basic functionality.  Until AGESA's reporting of
memory configuration is available, use the TOM register as an
indicator for the top of usable memory.

Change-Id: I516b79c3e798f5fc68c2771b2f66034c6867b19e
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-19 21:51:31 +00:00
Marshall Dawson badd460229 soc/amd/picasso: Remove unused Kconfig options
No AGESA v5 binaryPI features are still present in the picasso directory.
Remove the PI and S3 selects.  Remove DCACHE symbols.  Remove all vboot
options until the new PSP-based solution is developed.

Change-Id: I6542578afafc0ee3c3117a971b1a021dbe53f42c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-19 21:51:20 +00:00
Kyösti Mälkki 4f14cd8a39 arch/x86,soc/intel: Drop RESET_ON_INVALID_RAMSTAGE_CACHE
If stage cache is enabled, we should not allow S3 resume
to load firmware from non-volatile memory.

This also adds board reset for failing to load postcar
from stage cache.

Change-Id: Ib6cc7ad0fe9dcdf05b814d324b680968a2870f23
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-12-19 19:31:08 +00:00
Kyösti Mälkki 6766f4fd04 arch/x86: Fix S3 resume without stage cache
It was possible to have NO_STAGE_CACHE=n and at the same time have
TSEG_STAGE_CACHE=n and CBMEM_STAGE_CACHE=n. This resulted with a
failing attempt to load STAGE_POSTCAR from the stage cache, but not
loading it from CBFS either.

Make it a three-way choice between different STAGE_CACHE options.
For AGESA disable CBMEM_STAGE_CACHE by default, as it is no longer
needed to have functional ACPI S3 resume and it is not allowed
se use keyword select for symbols inside choice blocks.

Change-Id: I0da3e1cf4c92817ffabbb02eda3476ecdfdfa278
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37683
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19 19:30:40 +00:00
Elyes HAOUAS 23c1c4e153 commonlib/fsp_relocate: Fix typos
Change-Id: I9426b88c0936c68d02554b580cc312902b8e5e13
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37810
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19 17:50:22 +00:00
Kyösti Mälkki 94ce79d6c8 device/pciexp: Match Max_Payload_Size between ends of a link
Ends of a PCIe link may advertise different Max_Payload_Size in
their PCIe Express Capabilities, Device Capabilities block.

For correct operation, both ends of the link need to have their
Device Control Max_Payload_Size programmed to match and not
exceed the other end's Device Capabilities.

Fixes: https://ticket.coreboot.org/issues/218

Change-Id: I8b1de13e9c73abb30e5ccc792918bb4f81e5fe84
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-12-19 17:50:03 +00:00
Wim Vervoorn d1371508f5 {drivers,soc}/intel/fsp2_0: Move chipset specific logo handling to SoC
FSP logo handling used FspsConfig.LogoPtr and FspsConfig.LogoSize which
are chipset specific.

Create soc_load_logo() which will pass the logo pointer and size.
This function will call fsp_load_logo which will load the logo.

BUG=NA
TEST= Build and verified logo is displayed on Facebook Monolith

Change-Id: I30c7bdc0532ff8823e06f4136f210b542385d5ce
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37792
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19 17:49:38 +00:00
Aamir Bohra 53490444f7 soc/intel/tigerlake: Add required header files in pch.c
Add header files to fix build issues due to missing declaration
for get_pch_series and die_with_post_code functions.

Change-Id: Ie8ba4970ec1b73c1e481f54bcfbf95be87d9c442
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-12-19 17:49:13 +00:00
Karthikeyan Ramasubramanian 1e83e5c61a src/arch/x86: Build mainboard acpi_tables source if present
Current build rules require adding blank acpi_tables in some of the
mainboards (eg. octopus, hatch). Update the build rules to compile the
acpi_tables.c only if it is present. This will help to avoid adding
blank acpi_tables.c source file.

BUG=None
TEST=Build test with octopus and hatch without blank acpi_table.c file.

Change-Id: I7dfacc6f4c737699b22acd96e17c9426d33574bd
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-12-19 17:48:57 +00:00
Johnny Lin b9e8448384 drivers/ipmi: Add IPMI Read FRU function
Implemented according to IPMI "Platform Management
FRU Information Storage Definition" specification
v1.0 for reading FRU data Product Info Area and
Board Info Area.
SMBIOS data can be updated with the FRU data.

Tested on OCP Mono Lake.

Change-Id: Id6353f5ce3f7ddd3bb161b91364b3cf276d020b8
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
(cherry picked from commit 8ac46b937c)
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37095
2019-12-19 17:48:30 +00:00
Bora Guvendik 3280b76729 storage/mmc: Fix wrong frequency setting for HS speed mode
Emmc spec, JEDEC Standard No. 84-B51, section 6.6.2.3, selection
flow of HS400 using Enhanced Strobe states that host should change
frequency to ≤ 52MHz when switching to HS speed mode first. In
current code, mmc_select_hs400() calls mmc_select_hs() to do this,
however caps are not cleared, so when switching from HS200 to HS400,
caps will still have DRVR_CAP_HS200, and mmc_recalculate_clock() will
set 200Mhz instead of ≤ 52MHz. As a result, switching to HS400 will
intermittently fail.

BUG=b:140124451
TEST=Switch speed from HS200 to HS400 on WHL RVP.

Change-Id: Ie639c7616105cca638417d7bc1db95b561afb7af
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37775
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19 17:48:15 +00:00