ifdtool will now dump access permissions of system comonents to
certain IFD sections:
Found Master Section
FLMSTR1: 0xffff0000 (Host CPU/BIOS)
Platform Data Region Write Access: enabled
GbE Region Write Access: enabled
Intel ME Region Write Access: enabled
Host CPU/BIOS Region Write Access: enabled
Flash Descriptor Write Access: enabled
Platform Data Region Read Access: enabled
GbE Region Read Access: enabled
Intel ME Region Read Access: enabled
Host CPU/BIOS Region Read Access: enabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR2: 0x0c0d0000 (Intel ME)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: enabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: enabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR3: 0x08080118 (GbE)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: disabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: disabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: disabled
Requester ID: 0x0118
Also, ifdtool -u /path/to/image will unlock the host's
access to the firmware descriptor and ME region.
ifdtool -l /path/to/image will lock down the host's
access to the firmware descriptor and ME region.
Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1755
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
To avoid having two copies for every firmware descriptor (one for
EM100 use and one for real SPI flash use), add an EM100 mode to
ifdtool that allows to "dumb down" a fast image to the settings
required for the EM100 to work.
Change-Id: I0ed989f0a49316bc63d8627cb5d4bd988ae7a103
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1039
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>