From the Linux documentation (Documentation/PCI/acpi-info.rst):
[6] PCI Firmware 3.2, sec 4.1.2:
If the operating system does not natively comprehend reserving the
MMCFG region, the MMCFG region must be reserved by firmware. The
address range reported in the MCFG table or by _CBA method (see Section
4.1.3) must be reserved by declaring a motherboard resource. For most
systems, the motherboard resource would appear at the root of the ACPI
namespace (under \_SB) in a node with a _HID of EISAID (PNP0C02), and
the resources in this case should not be claimed in the root PCI bus’s
_CRS. The resources can optionally be returned in Int15 E820 or
EFIGetMemoryMap as reserved memory but must always be reported through
ACPI as a motherboard resource.
So in order for the OS to use ECAM MMCONF over legacy PCI IO
configuration, a PNP0C02 HID device needs to reserve this region.
As no AMD platform has this defined in DSDT this fixes Linux using
legacy PCI IO configuration over MMCONF. Tianocore messes with e820
table in such a way that it prevents Linux from using PCIe ECAM. This
change fixes that problem.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I852e393726a1b086cf582f4d2d707e7cde05cbf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75729
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to reduce S0ix resume time, decrease stop_delay_ms from
300ms to 200ms for Goodix GT7996F. The value source is from
https://partnerissuetracker.corp.google.com/issues/285999032#comment16.
BUG=b:285999032
BRANCH=firmware-nissa-15217.B
TEST=boot uldren to ChromeOS and touchscreen is workable.
Change-Id: I2f0adadbd3d0774da03338cc0abd1639104876d9
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76577
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
There is a problem of screen shake on the old panel[1]. So increase the
panel GOP component pull-down circuit size in hardware, and update the
initialization code at the same time. The new initialization code is
mainly adjusted for GOP timing. When Display sleep in, raise all GOP
signals to VGHO and then drop to GND. In order to be consistent with
the current panel model, let's rename this file.
[1]: INX old panel product number is HJ110IZ-01A-B1, and the new
panel product number is HJ110IZ-01A-B2. We have recalled the shipment
old panel.
BUG=b:270276344
BRANCH=trogdor
TEST= test firmware display pass
Change-Id: I2b2534afee1ed700c39d3c360aafd685b63ccbfb
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch updates the Type-C USB2/3 port mapping to reflect the mux
connection change as mentioned in previous patch
commit ee3f796200 (mb/google/rex/var/ovis: Fix mux
change as per schematics).
Here is the correct port mapping after considering the mux swap:
+--------------------------------+-------------+---------------+
| TCSS-USB Mapping | Port C0 | Port C1 | Port C2 |
+------------------+-------------+-------------+---------------+
| USB2-Port | 2 | 3 | 1 |
| USB3-Port | 0 | 2 | 1 |
+------------------+-------------+-------------+---------------+
BUG=b:289300284
TEST=Able to build and boot google/ovis to get display over Type-C1
and Type-C2 port.
Change-Id: I460004842dd8fcdc03fca6639d03e422259380ca
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76464
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Patch to increase CONSOLE_CBMEM_BUFFER_SIZE to contain FSP debug serial log.
The existing implementation uses larger cbmem size irrespective of FSP debug is enabled or
not. Ideally. larger cbmem size is required only if FSP debug is enabled.
Bug=b:284124701
TEST=Able to build and boot google/marasov.
Change-Id: I9a9e660f2738813808e0dd65d2783424b49f9a5e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reduces the CAR (Cache-as-RAM) variable usage while using FSP debug binaries, which can prevent the CAR from becoming too full and unable
to integrate other CAR global variables.
This change has the following downsides:
- FSP debug output into the cbmem buffer will be partial.
To test this change, you can:
Build and boot google/rex without any function impact with non-serial
and serial FSP debug image (unless what has been documented here).
Bug=b:284124701
TEST=Able to build and boot google/rex.
Change-Id: I16a1aa25fd32327d03a37381a696c86c95014ba0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add and use a define for the total number of P-state MSRs to avoid magic
constants in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I37a89faa0f216790b3404fc03edc62408684cc24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
There are 8 P-state MSRs and not only 7.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic2899b6e454233c6cbb8fc1e439ff069c4d3d3a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
According to Intel doc#763797 to overcome early command training hang
issue, the CsPiStartHighinEct needs to be enabled for hynix memory.
BUG=b:284192689
BRANCH=firmware-brya-14505.B
TEST=Built and booted into OS.
Change-Id: Ic177c5ffcb6a3d3f76292a0d99ab0e806d43fc11
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76549
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
According to Intel doc#763797 to overcome early command training hang
issue, the CsPiStartHighinEct needs to be enabled for hynix memory.
BUG=b:281643325
BRANCH=firmware-brya-14505.B
TEST=Built and booted into OS.
Change-Id: I95702e675fa3b73c7e8ee0c8625c7828d8129ea8
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76355
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit provides option for board to set CsPiStartHighinEct
FSP UPD using a new cs_pi_start_high_in_ect mb_cfg field.
BUG=b:279835630
BRANCH=none
TEST=CsPiStartHighinEct UPD is set properly
Change-Id: I7d0d5f3c782e29fb047ea421e1a5fdfc30bcc26d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Intel SPR supports up to 64 DIMMs on a 4 socket board.
Bump DIMM_INFO struct to 64 slots to properly present all
of them to the OS.
Change-Id: I52d77c4e9bff96adba6d265a272e0e425dbdb791
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73367
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
Disable the CSME by default now that S3 is used instead of S0ix.
The CSME will not go into a low power state during S0ix when it is
disabled. This prevents the CPU from reaching C10 and so increases the
power usage during suspend compared to leaving CSME enabled. (This was
measured to be a ~2W different on TGL-U.) In S3, the state of the CSME
doesn't matter because the CPU will be off.
Change-Id: I88c0aebdcc977f3ba9dd8f46a6abfaa7a4ae8eb6
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73354
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
System76 EC since system76/ec@9ac513128a detects if the keyboard is
white or RGB backlit via `RGBKB-DET#` at runtime. Remove the Kconfig for
the selection and update the ACPI methods for the new functionality.
Change-Id: I60d3d165a58e30d2afc8736c0eb64dd90c8227ca
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76152
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After fixing TPM logs clobbering other regions in CB:73297, S3 no longer
causes cache issues resulting in power off after multiple suspends.
This is required for disabling Intel CSME by default.
Change-Id: I7eef4c883fd65db93dae81adabd895b2de90496a
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
The preram TPM log was being copied to the end of the CBMEM TPM log no
matter what the size of the CBMEM TPM log was. Eventually, it would
overwrite anything else in CBMEM beyond the TPM log.
This can currently be reproduced by enabling TPM_MEASURED_BOOT and
performing multiple S3 suspends, as coreboot is incorrectly performing
TPM measurements on S3 resume.
Change-Id: If76299e68eb5ed2ed20c947be35cea46c51fcdec
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73297
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The original default, minimum abbreviated hash length was 7. It dif-
fers on newer systems, however. This breaks reproducibility, so set
an explicit length. 12 hex digits should be good enough.
Note: This sets only a minimum. With a high enough number of commit
objects in the repository, Git could still decide to use a longer
hash, again breaking reproducibility. 12 digits will hopefully pro-
vide enough margin.
Change-Id: Ia86e9cc41e27a0a57d498dcb13aec954c4ea0f04
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
The current Sapphire Rapids code assumes that all sockets have working
CPUs. On multi-socket platforms a CPU might be missing or was disabled
due to an error. The variable PlatformData.numofIIO and the variable
SystemStatus.numCpus reflect the working CPUs, but not the actual
socket count.
Update the code to iterate over sockets until PlatformData.numofIIO
IIOs have been found. This is required as FSP doesn't sort IIOs by
working/non working status.
This resolves invalid ACPI table generation and it fixes a crash
as commands were sent to a disabled CPU.
TEST: Disabled Socket1 on IBM/SBP1.
Change-Id: I237b6392764bbdb3b96013f577a10a4394ba9c6e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76559
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:290876132
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Change-Id: Id5e0ba7a4ca57e311465ba8e74105f5ee7b8ee8a
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76435
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the actual SocketID instead of the running index.
Change-Id: I9128909756d0dbb0c4dabc52acdc98cb2a4f7baa
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76558
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The comment is only true if all sockets have working CPUs installed.
Change-Id: I8c3376c9233c33fb770082573e07e9d96abb7855
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76557
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add a function to check if the CPU placed at the specified socket was
found usable during QPI init. This is useful for multi-socket
platforms were a CPU is missing or has been disabled due to an error.
Change-Id: I135968fcc905928b9bc6511e3ddbd7d12bad0096
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use the FSP define to iterate over all sockets as the runtime value of
numofIIO is the detected number of sockets, not the highest working
socket.
This fixes printing the HOB on multi-socket platforms where a CPU has
been removed or has been disabled (4S system running as 3S).
Change-Id: Ieed67cd48d26c7634636c0aae6a56f3b6fbdf640
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76492
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On Intel Meteor Lake (MTL), PCIe CLK control register is accessed by
P2SB on IOE/SOC die.
So this patch does:
1. Enable PCIE_CLOCK_CONTROL_THROUGH_P2SB
2. Include pcie_clk.asl
3. Set the correct IOE_DIE_CLOCK_START for MTL-U/H.
BUG=b:288976547, b:289461604
TEST=Test on google/screebo and found the pcie clock is on/off properly
and sdcard PCIe port doesn't block S0ix with RTD3 cold enabled.
Change-Id: I6788ae766f36c9a0d4910fda1d6700f20ce73ea8
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76356
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In the older platform such as Raptor Lake (RPL), Tiger Lake (TGL), it
needs PMC IPC cmd to turn on/off the corresponding clock.
Now on Meteor Lake (MTL), it control pcie clock registers on P2SB on
IOE or SoC die.
BUG=b:288976547, b:289461604
TEST=Test on google/screebo and found the pcie clock is on/off properly
and sdcard pcie port doesn't block S0ix with RTD3 cold enabled.
Change-Id: Ia729444b561daafc2dca0ed86c797eb98ce1f165
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76347
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch includes the ioe_pcr.asl file as Intel Meteor Lake has
support for IOE die.
BUG=b:290856936
TEST=Able to build and boot google/rex.
Change-Id: Ia534dbc0db5e54e173da9cdf475a7eb2bfda9e2f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76410
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch introduces a new config named IOE_PCR_BASE_ADDRESS to define
P2SB base address.
BUG=b:290856936
TEST=Able to build and boot google/rex.
Change-Id: I289358f9c53b557a397bd7186e6b7419c5d8c954
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76411
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch creates a helper library to migrate all the common P2SB
access routines. The PCH P2SB ACPI implementation will now rely on the
common library to perform PCR read/write operations. This will make the
code more modular and easier to maintain.
The helper library provides a single interface for accessing P2SB
registers. This makes it easier to port the code to different platforms,
for example: adding support for PS2B belongs to the IOE die for
Meteor Lake SoC generation.
BUG=b:290856936
TEST=Able to build and boot google/rex.
Change-Id: I0b2e7ea416ca7082f68d0b822ebb9a87025b4a8b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76408
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Use newer functions and avoid the * / KiB dance
- Use existing functions for figuring out TSEG and UMA
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I73549b23bd1bfd4009e6467a5bdfeef7de81a0cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76272
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In the JPEG decoder, use `bytes_per_line` instead of `width` for
address calculations, to allow for bigger framebuffers. When
calling jpeg_decode(), add an offset to the framebuffer address
so the picture gets centered.
Change-Id: I0174bdccfaad425e708a5fa50bcb28a1b98a23f7
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Factor out all functions that use the indirect IO port based access to
the PM registers into a new compilation unit and only select it on
platforms that support this interface.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If9c059e450e2137f7e05441ab89c1f0e7077be9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
In all SoC pm_set_power_failure_state gets called either after a call to
enable_acpimmio_decode_pm04() or the ACPIMMIO mapping is already enabled
after reset on the SoC. This allows to use pm_read8 and pm_write8 that
use the ACPIMMIO mapping of the PM registers instead of pm_io_read8 and
pm_io_write8 which won't work on Phoenix and Glinda due to the IO ports
used on older generations to access to the PM registers not being
implemented any more.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0d0523d2c4920da41b3fb73cf62f22a60f1643a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Use pm_io_write8 instead of open coding the same functionality.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d9397f2d85e48883f961adbbca0e1e71e825ce0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
rv32iafc-ilp32 is compatible with rv32iac-ilp32 for library
implementation, so add a reuse rule allowing the default configuration
to support rv32iafc.
-IAFC is an unusual configuration (much less common than -IMAFC),
but multilib reuse has essentially no cost: this change is useful to
users of platforms that support hardware floating-point but cannot
use hardware multiply/divide for any reason. To avoid generating a
new set of libraries this is limited to the soft-float ABI.
Tested by verifying that `gcc -march=rv32iafc -mabi=ilp32
--print-search-dirs` refers to the rv32iac/ilp32 library directory
as expected, rather than just the root library directory as occurs
when an unsupported target is selected (for instance, rv32id).
Change-Id: Ie056ba6488a138fe0876eebf7cbc59477b3c3518
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Arthur Heymans