and remove it from mainboard/intel/mtarvon, as this function
is implemented in the southbridge code.
Change-Id: Id3669aaf99b96b4a7a965f4957e5de7c365acaa6
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/469
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
fix cb_info.serial.ioport to cb_info.serial.baseaddr
Change-Id: I32f261e4be927555979eb833d0251fce2c6a5c47
Signed-off-by: QingPei Wang <wangqingpei@gmail.com>
Reviewed-on: http://review.coreboot.org/441
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Without that fix the linux kernel cannot change the frequency
of the CPUs with cpufreq.
Change-Id: Ie00e4b11b2561356952d8ae28bd0a00523b6d85f
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/458
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This mainboard is very similar to the M4A785-M, but it has
DDR3 instead of DDR2.
That's why most of the code was copied or included from
the m4a785-m directory
Notable changes between the two mainboards include:
* the selection of the last microcode (mc_patch_010000b6.h)
which made it pass the CPU init.
* the selection of DDR3 which made it pass the ram init
This change was tested with the Trisquel 5.0 GNU/Linux distribution
which uses the linux-libre version 2.6.38-12-generic
The mainboard boots fine, however some special care is required for
the onboard sound CODEC, and the onboard video chip:
* the onboard sound CODEC(snd-hda-* has to be blacklisted), the issue
is the same than the ASUS M4A785-M mainboard:
It causes a flood of interupts which prevents booting
* The internal video chip currently requires pci=nocrs, else
the graphics are frozen as soon as the radeon module loads,
and dmesg would print the following(the card only has 256M,
and the mainboard was equiped with 2G of RAM):
[ 3.674762] [drm] radeon: 3584M of VRAM memory ready
[ 3.679863] [drm] radeon: 512M of GTT memory ready.
instead of :
[ 45.876088] [drm] radeon: 256M of VRAM memory ready
[ 45.876089] [drm] radeon: 512M of GTT memory ready.
* The screen(both VGA and HDMI) flickers at high resolution
* Sometimes the computer freeze while changing the resolution
(even the serial console stops responding)
The following peripherals were tested:
* The ath9k PCI wireless card was tested
* The SATA hard disk works fine
* the USB keyboard and mouse work fine
* htop see 2 cores
* serial port works under coreboot and GNU/Linux
* power off and reboot works
CPU frequency cannot be changed yet, this is addressed
in a new commit.
More detail are available here:
http://www.coreboot.org/ASUS_M4A785T-M
dmesg is available here:
http://www.coreboot.org/pipermail/coreboot/2011-November/067604.html
The mailing list thread on the graphic problem is here:
http://www.coreboot.org/pipermail/coreboot/2011-November/067466.html
Change-Id: I5df0bc1f9f0071b1e1ee7c8a356bf517aa8cf732
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/457
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Apply the normal method of recursively including subdirectories
for src/vendorcode. Remove redundant references under
mainboard and northbridge.
Change-Id: I914a6e262ed2abe83f407df36fe5c1af5eb4bcb0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/468
Tested-by: build bot (Jenkins)
Reviewed-by: Kerry Sheh <shekairui@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Following files were no longer used in the build and are deleted:
src/arch/x86/init/entry.S
src/arch/x86/init/ldscript.ld
Also fix ugly whitespace in code copyrights and comments.
Change-Id: Ia6360b0ffc227f372d5f997495697a101f7ad81b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/440
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Disable DRAM controller on non-fam-f CPUs not using fam-f register layout.
Change-Id: I2cc87857452555011d69bfebe9f9c4c17cef8f6c
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/448
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Relocate early post_code() so it gets executed and does not corrupt
BIST at %eax.
Change-Id: Ieeebcb23f7c327e501b410eaa60d1e49110ee988
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/439
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
AMD unionstation Reference Design Kit is Designed for hd settop box application.
This platform using family14 APU, SB800 southbridge.
Vgabios is required, can download vgabios from AMD NDA website.
Verified Feature:
HDMI, LAN, mini-pcie slots, sata, usb, analog audio and
optical fiber digital audio output.
Change-Id: Ib1d1d8c889d6fb29f4298b57dfe5c5c1cea1431c
Signed-off-by: Kerry She <kerry.she@amd.com>
Signed-off-by: Kerry She <shekairui@gmail.com>
Reviewed-on: http://review.coreboot.org/434
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
AMD southstation Reference Design Kit is designed for NAS application.
This platform using family14 RevC0 processor, SB850 southbridge.
Vgabios and Promise RAID Option ROM is required for hardware RAID support,
can retrieve from the AMD NDA website.
Verified feature:
HDMI, LAN, usb and mini-pcie slot.
RAID0, RAID1 RAID10 and RAID5 upto 6 sata hard drive with ubuntu server 10.10.
Change-Id: I16e6f5dab8b0d634e186068c81436db77fb4475a
Signed-off-by: Kerry She <kerry.she@amd.com>
Signed-off-by: Kerry She <shekairui@gmail.com>
Reviewed-on: http://review.coreboot.org/433
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
PDcurses wants set_blink to determine color count. Not exactly
obvious.
Change-Id: I8b2a32f0095d5900fa7e01f04f3f1d565dc2bedf
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/432
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
make code dependent on CONFIG_SOUTHBRIDGE_VIA_K8T800 also be included
for CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD
Change-Id: I9f4624d08de2790fb513a88ed6207e28e7fbc733
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/374
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The PS/2 keyboard driver set and reset the caps LED to show the
keyboard status. Unfortunately, that configuration happens over
the same path used to transmit keypresses.
In face of certain error conditions, the keyboard stopped working.
This change makes keyboard handling more robust.
Change-Id: I0489a9983ea7dab00357220e09398dd1a8538839
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/430
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Code style fixes for the hp/dl145_g1 system board code.
Change-Id: I3c1a175d954e2d340e82c03c9f984699dcff865e
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Reviewed-on: http://review.coreboot.org/428
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
make w83697hf_set_clksel_48() non-static and add a prototype so as to
get rid of warnings about it being unused
Change-Id: I8ae94cfd61ae4774a367f83dd37e488987e2451a
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/380
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
valid_area will accept a region as valid for the payload if only a part
of coreboot fits in that region. This means if a payload reaches into a
neighboring RESERVED region, coreboot would not care and happily
overwrite that region, as long as the payload also writes to some RAM.
Change-Id: Ie263f83be18009b01a31c71e7285c998747d097f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/425
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
http://review.coreboot.org/#change,378 introduced a function in k8x8xx.h
move this function to ctrl.c and add a prototype to the header file instead.
Change-Id: I0919ffb2030c53669b95f58b649d4a160f660923
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/429
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
- move cbfs_load_payload to the end so we can drop the prototype
- move lb_start and lb_end to the beginning so they can be used
in other functions.
- drop two unused function declarations
- break a 80+ characters line
- fix a comment
Change-Id: I460aa1e2ccf9d95ac12233af001076f73ab0268e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/424
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Using RAMINIT_SYSINFO should be beneficial for this platform.
It is also more clean/safe to put data in struct mb_sysconf_t.
It's more consistent with other MB's and I've tested it
thoroughly on my DL145.
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Change-Id: Ie90a134a1efc9605b3fe17a5b5008856226984be
Reviewed-on: http://review.coreboot.org/236
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Collecting per-board abuild.xml is bound to fail if there
are no such files.
Change-Id: I6bd6b4389beda51654005e0380f0e52f006642db
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/422
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of writing to config registers in k8x8xx's dram_enable()
and reading those back in vt8237r_cfg(), factor out generation of
the values and reuse that in both places.
Change-Id: I87a37398efe84b33e6678df74cd40b5abfe4f879
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/378
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
vt8237r_enable() so far wrote the function enable values to the same
offset in the config space of every one of the vt8237's functions,
even though the register is located in the ISA bridge only.
Change-Id: I639586dc238132f5b8d2f320b794948718281b9c
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Reviewed-on: http://review.coreboot.org/368
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This should fix issues with the iasl Makefile on Debian and
prepares ccache support for buildgcc.
Change-Id: Id9e6b2044b159b19bf013ec5c47b60ca1c2f2991
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/399
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
kconfig creates reasonably safe filenames for its temporary files
except for two of them.
Change-Id: I6861f55ae2a5311e3fb7919333ce9af1e39ce78b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/408
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Write them per-board and merge them after everything is done.
This prepares for build parallelization.
Change-Id: Ia4e7ce03473bcf8861fb9ae06e9c1270292401ac
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/407
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use MAKEFLAGS to propagate the parallelization configuration to
the build
Change-Id: If90ed446edd8e6dc679d284ee9db7a24269edd36
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/406
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
By moving the just-created file away, parallel runs of abuild might break.
Change-Id: I03368f00e9b11dad4c80d41279970e28debc7ed5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/405
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This was split out when we had separate rules for big bootblock.
Change-Id: Id0a117f6996fb6bdef7bf97e7d80c36f5dec0ad7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/404
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix multiple copy&paste errors and some other bugs in
devtree.asl. Redesign ENCM method to enter configuration mode
and set LDN by parameter. Reordered and commented some
statements to make the code a bit more readable. Add an ifdef
to enable never showing the keyboard controller as disabled,
which seems to cause bugs at least with some Linux kernels.
Remove keyboard controller IO regions from PS/2 mouse device
as e.g. Linux infers them from the keyboard controller device.
Change-Id: I44611339fabe31a8a584a3e6bd225082bfdd0b8e
Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de>
Reviewed-on: http://review.coreboot.org/357
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Drop explicit Scope(\_SB) from devtree.asl as it forces the SuperIO
to appear as child of the root device.
devtree.asl then needs to be included at a reasonable position inside
the \_SB device tree.
Change-Id: I72a57eddc5ec5f9763fdf789094a7be042758256
Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de>
Reviewed-on: http://review.coreboot.org/298
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
buildgcc moved from building gdb by default (with opt-out) to
gdb being optional. Adapt Makefile so it works again
Change-Id: I663a8c70db4f7b5d07456fb67a223dbb2de2c133
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/417
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
So far it was empty and never published. It now exists and shuts down
all controllers (esp. EHCI which resets the port routers).
Change-Id: I81e355e8a05778d6397675417b085a094a6f48ee
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/397
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Sven Schnelle