Commit Graph

533 Commits

Author SHA1 Message Date
Gabe Black 00e5da6f25 libpayload: Don't do unaligned accesses during LZMA decompression
Use memcpy to access a uint32_t that's inherently unaligned due to the layout
of the LZMA header format.

Built and booted on Daisy and saw a data abort go away. Built and booted
into developer mode on Link and verified that bitmaps were
decompressed/displayed correctly.

Change-Id: Id3ae746c04d23bcb0345cb71797bfa219479cc8f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2670
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:42:09 +01:00
Gabe Black 903f8e0330 libpayload: Add size_t and ssize_t types for ARM and x86
Some new TPM drivers in depthcharge require that type. I added it to
arch/types.h which seemed appropriate, but I'm not sure that's exactly the
right header to use, or in other words if you'd get that type from libpayload
the same way you'd get it if you were building a standard Linux program.

Also, I attempted to determine what underlying types gcc would use, and while
I think I picked the right ones I'm not 100% certain of that either.

Change-Id: Ic5c0b4173c8565ede3bfce8870976d596d69e51d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2669
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:41:40 +01:00
Gabe Black a0e27979c0 libpayload: Move over to the payload's stack during startup
Don't keep using the coreboot stack on ARMv7.

Change-Id: I734c5d77f8584e30ee0c720d41e21e3040f56db4
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2668
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:41:23 +01:00
Gabe Black 49ff3c50dd libpayload: ARCH-$(CONFIG_ARCH_ARMV7) was defined twice, make one POWERPC
Change-Id: Ia85a7cd6a0b85119cce6b2f9c42a7fc31ffd9f97
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2654
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:09:31 +01:00
Gabe Black dc9e77f451 libpayload: Add usb_generic_(create|remove) functions for unrecognized devices
It might be useful to provide a USB driver in the payload itself instead of in
libpayload. For example there are multiple payloads being built and linked
against the same libpayload, and they might not need or even want to have the
same set of drivers installed.

This change adds two new functions, usb_generic_create and usb_generic_remove,
which behave like the usbdisk_create and usbdisk_remove functions which are
defined for USB mass storage devices. If a USB device isn't recognized and
claimed by one of the built in USB class drivers (currently hub, hid, and msc)
and the create function is defined, then it will be called to give the payload
a chance to use the device. Once it's removed, if usb_generic_remove is
defined it will be called, effectively giving the payload notice.

Built and booted depthcharge on Link. Built depthcharge for Daisy. Built
a netbooting payload, called usb_poll() with those functions implemented, and
verified that they were called and that the devices they were told about were
reasonable and the same as what was reported by lsusb in the booted system.

Change-Id: Ief7c0a513b60849fbf2986ef4ae5c9e7825fef16
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2666
Tested-by: build bot (Jenkins)
Reviewed-by: Kimarie Hoot <kimarie.hoot@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:08:58 +01:00
Julius Werner 69eea7c01a libpayload: Split EHCI bulk transfers on packet boundaries over qTDs
EHCI controllers see transfers as a queue of transfer descriptors
(qTDs), each of which can represent an aligned area of up to 20KB. Each
qTD is processed separately, which means that a single USB packet cannot
span multiple qTDs.

While this should not be a problem according to the specification, some
USB storage devices seem to get confused when a packet in the middle of
a transfer is smaller than the maximum packet size (512 bytes) due to
falling on a qTD boundary. This patch aligns the total transfer length
per qTD to 512 bytes to avoid that problem (any excess bytes will simply
roll over to the next qTD).

Change-Id: I0b5db07507699a3861b30c1a5ee774c45dda7fdd
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/2651
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:08:11 +01:00
Vincent Palatin 716375dd3e libpayload: add support for 64-bit EHCI controllers
Initialize the high part of the address
and use 64-bit compatible descriptors.
(waste a few bytes on 32-bit but should be harmless)

Read USB stick on a SandyBridge system which has 64-bit EHCI.

Change-Id: I59cc842459acecdde8f8bdd4795ebfeccb842c8f
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2650
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kimarie Hoot <kimarie.hoot@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:07:49 +01:00
Gabe Black 613c0f630a libpayload: Stub out time keeping functions for ARM as well
These were currently stubbed out for PowerPC but not for ARM.

Change-Id: I08f45174877bf5751d972078b8c53d82898b7f2b
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2655
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:06:27 +01:00
Gabe Black 1617e1f0ab libpayload: If no video drivers initialize in video_init, return 1.
Change-Id: I56f810dfa6654ac1e9d1696ad15e7f1b8bfe59bd
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2652
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-13 23:06:14 +01:00
Gabe Black b7b57d9751 libpayload: If there's no IO address space, don't try to use it for serial
Change-Id: I01b1fa42139af925716cd5d57f96dc24da6df5a7
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2660
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:05:06 +01:00
Gabe Black d8d4d113f0 libpayload: If there's no IO space, complain if the serial claims to use it
Change-Id: I36c750d520ff034c9ca9b9af46bd99bd49af7355
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2659
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:04:54 +01:00
Gabe Black 1c1171208f libpayload: Consolidate io vs. mem mapped serial into accessor functions
This way we won't have two copies of the hardware init function, and three
copies of the putchar, havechar, and getchar functions.

Change-Id: Ifda7fec5d582244b0e163ee93ffeedeb28ce48da
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2657
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:04:29 +01:00
Gabe Black d267987083 libpayload: Make whether or not there's an IO address space configurable
Default it to no to be consistent with the other architecture wide options
(endianness), and turn it on explicitly for x86 and PowerPC.

Change-Id: Idda26d580156bbbf08ea11b28abe75cfa6b594b2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2658
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 23:02:05 +01:00
Ronald G. Minnich ba949d32ba libpayload: Start using only internal and compiler headers.
When building other payloads with lpgcc the -nostdinc flag was injected into
CFLAGS, but when building libpayload itself some headers were being used from
the host system. This change puts -nostdinc into the Makefile and xcompile
script, fixes up one include path in include/inttypes.h, adds the compiler
provided include directory to the include search path, and deletes the two now
redundant stdint.h files.

BUG=None
TEST=With this and other changes, built libpayload and depthcharge for Daisy,
Link, and Fox.
BRANCH=None

Change-Id: Ia7817fceab5297cd82ccc0d392330de0df61980e
Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2710
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-13 22:04:44 +01:00
Gabe Black 2def2625e0 libpayload: Add more parenthesis to the endian conversion macros
There weren't enough parenthesis in the macros so operations might only apply
to the last part of an expression passed in as an argument.

Change-Id: I5afb406f9409986e45bbbc598bcbd0dd8507ed35
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2665
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-13 19:12:31 +01:00
Gabe Black b53a73ef77 libpayload: Make the source for lzma decompression const
Change-Id: I9a16331dedc97f17af94bf2cf535a9c93d1729a0
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2667
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-03-13 18:16:35 +01:00
Hung-Te Lin e112b746e0 libpayloads: Provide BSD/glibc style endian functions.
The functions in endian.h (betoh{l,w,ll} and others) were named differently from
the well-known BSD/glibc style endian functions (ex, betoh{16,32,64}). We should
provide the BSD/glibc style functions to prevent confusion.

Change-Id: Ia3bee481ba7989ac25b79ddb89bc6819d52fd8c3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2705
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13 17:37:09 +01:00
Gabe Black e0c974185c libpayload: Remove unnecessary include of arch/msr.h
The functions defined in that header aren't used anywhere in the actual code,
and that include breaks things on ARM.

Built for ARM with COREBOOT_VIDEO_CONSOLE turned on and saw compiler
errors go away.

Change-Id: I56d6fe5e00c8fccda6e31ef8752326bd36398e74
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2656
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-12 23:56:43 +01:00
Gabe Black 2c2c4fae22 libpayload: In the USBMSC read_capacity function, make buf an array of u32.
That way when it's treated as a u32 when its value is extracted for numblocks
and blocksize below, it doesn't make the compiler unhappy, and it ensures that
the buffer will be properly aligned on architectures where that sort of thing
matters.

Built and saw warnings about type punning go away.

Change-Id: I254e0b5e70847112d660675b7df0ac9cb52e4051
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2653
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-12 23:56:16 +01:00
Patrick Georgi db2e3aa257 libpayload: Fix reading x86 CBFS images from RAM
Three issues:
 1. the hardcoded dereferenced pointer at 0xfffffffc
 2. "RAM media" has no idea about ROM relative addresses
 3. off-by-one in RAM media: it's legal to request 4 bytes from 0xfffffffc

Change-Id: I671ac12d412c71dc8e8e6114f2ea13f58dd99c1d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2624
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2013-03-12 10:23:12 +01:00
Gabe Black c8e4284acb libpayload: Turn on thumb interworking in libpayload.
Things work better with it turned on, and the overhead should be negligable.

Built and booted into depthcharge on Snow. Verified that calling between
various bits of thumb and ARM code worked correctly.

Change-Id: I08d1006e113d2cca08634bf19240aca138a449d9
Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2567
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-04 22:47:49 +01:00
Ronald G. Minnich 9907c6edeb libpayload: Catch exceptions and print out an error message.
Give some indication what happened instead of just crashing.
As part of setup, cause an exception and make sure that we get
the right one, and that we recover correctly. Hence we have
some assurance that if they really happen we can handle them.

Built and booted into test payload on Snow. Saw the built in test function
worked correctly. Artificially added code which got an exception and saw that
the error information prints correctly.

Change-Id: I2e0d022f090ee422fb988074fbb197afa2485caa
Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2569
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2013-03-04 22:39:09 +01:00
Idwer Vollering 1a43309bf7 bump SeaBIOS to 1.7.2.1
Update coreboot to use SeaBIOS' tag rel-1.7.2.1

Change-Id: I01969407964a7cf64f7c4800b59c6aed845b24f9
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/2575
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-03-04 11:00:17 +01:00
Gabe Black d895827c0f libpayload: Mark "halt" as a function.
The linker uses that info so interworking can work correctly.

Built and booted into depthcharge on Snow and saw interworking start to
work correctly.

Change-Id: I0ac54f1c424ec70f8244edf6541a10b089ce47b4
Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2568
Tested-by: build bot (Jenkins)
2013-03-01 16:49:41 +01:00
Paul Menzel a46a712610 GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.

The following command was used to convert all files.

    $ git grep -l 'MA  02' | xargs sed -i 's/MA  02/MA 02/'

[1] http://www.gnu.org/licenses/gpl-2.0.txt

Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-03-01 10:16:08 +01:00
Gabe Black ef650a5d24 libpayload: Check for completion more often in ehci_set_periodic_schedule.
This function was using mdelay in a loop to check for the completion of an USB
controller operation. Since we're busy waiting anyway, we might as well wait
only 1 us before checking again and potentially seeing the completion 999 us
earlier than we would otherwise.

Change-Id: I177b303c5503a0078c608d5f945c395691d4bd8a
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2522
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-28 01:25:46 +01:00
Gabe Black 89ccc9285e libpayload: Add a pointer for user data on the USB MSC data structure.
This is so the user of libpayload can attach data to the device which it can
retrieve when the device is referred to later, for instance in usbdisk_remove.
Otherwise, there's no direct connection from the usbdev_t structure to any
bookkeeping in the host firmware.

Change-Id: I36fe693b0dcd2098e359c26744e376e73bd3a723
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2513
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-02-26 21:20:14 +01:00
Gabe Black 37ef52d44b libpayload: Correct a constant used for scanning for USB controllers.
When checking to see if a PCI device exists at a particular bus/dev/func,
libpayload was checking the vendor and device id fields together against a 16
bit 0xffff. The two fields together are 32 bits, however, so the check was
never true, and all dev/func combinations on a particular bus would be
checked. That was slightly wasteful, but had relatively small impact.

Change-Id: Iad537295c33083243940b18e7a99af92857e1ef2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2521
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-26 07:39:06 +01:00
Gabe Black b4523bb691 libpayload: Change the measurement interval for get_cpu_speed to 2 ms.
The interval used to be about 55 ms which is excessively long. Coreboot only
waits for 2 ms and gets a reasonable answer. That should be good enough for us
as well.

Change-Id: I4d4e8b25b6ba540c9e9839ed0bbaa1f04f67cce1
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/2520
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-26 07:38:41 +01:00
Hung-Te Lin fbf078311f libpayload: cbfs: Fix CBFS max size calculation.
Cherry-picking CBFS fix from http://review.coreboot.org/#/c/2292/

For x86, the old CBFS search behavior was to bypass bootblock and we should keep
that.  This will speed up searching if a file does not exist in CBFS.
For arm, the size in header is correct now so we can remove the hack by
CONFIG_ROM_SIZE.

Change-Id: I286ecda73bd781550e03b0b817ed3fb567d6b8d7
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2458
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-22 09:23:43 +01:00
Stefan Reinauer c9f35f5300 libpayload: Fix license headers
Not only were these files checked in with the Chromium OS Authors
copyright, but in addition they were wrongly licensed as GPL.
Switch to 3-clause BSD (and, since we're changing it, fix copyright,
too)

Change-Id: I3656c1f4304d53e343d89bb7c909fd4b929249f4
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2456
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-20 02:41:24 +01:00
Patrick Georgi 46cb96bb88 libpayload: libcbfs: Fix legacy CBFS API, typos
get_cbfs_header expects CBFS_HEADER_INVALID_ADDRESS (0xffffffff)
instead of NULL when something is wrong.

Also, fix typo.

Change-Id: Ibe56c9eab3b9fdfc6d0b14bc848ca75f3a4fc2f1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2455
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-19 19:44:57 +01:00
Ronald G. Minnich 7b6945405a libpayload: only compile drivers/serial.c on machines that use it.
Create a new serial console variable, X86_SERIAL_CONSOLE
which is only enabled when SERIAL_CONSOLE and ARCH_X86 are defined.

Builds for x86 and ARM.

Change-Id: I607253c418de015975a839e3c33577842885ec0c
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2412
Tested-by: build bot (Jenkins)
Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-16 04:48:51 +01:00
Ronald G. Minnich 8deb5c6e0f libpayload: Use the same type for 32 bit data in readl as in uint32_t.
The compiler gets mad when the types are equivalent size but not necessarily
interchangeable because of strict aliasing checks. Since uint32_t is likely to
be used when trying to read 32 bit data, it makes sense for them to be the
compatible.

Signed-off-by: Gabe Black <gabeblack@google.com>

Change-Id: If73d794866055dc026fc06d6268e692adac0f835
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2411
Tested-by: build bot (Jenkins)
Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-15 06:52:01 +01:00
Ronald G. Minnich 1a29c1e766 libpayload: fix compiler flags
lpgcc was unconditionally setting -m32.

Most of the flags it sets in the common case are right, however: no need
to duplicate them everywhere, and we only want to change the common ones
in one place, so it would be a shame to duplicate _CFLAGS all over the place.

So add another variable, _ARCHEXTRA, which can be used to add
special flags to _CFLAGS. We onlu use it at present for the x86; this may
change.

This allows us to get through compiling on arm and x86.

Change-Id: I12f1620982c4ee10f76b3953e4225f13db31531e
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2399
Tested-by: build bot (Jenkins)
Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-15 06:51:52 +01:00
Ronald G. Minnich 2cc105c741 libpayload: get time to compile cross-arch
Get rid of the nest of includes, and make separate sections
for each architecture. Also gets rid of the "there's X86 and there's
everything else" structure of this file.

Change-Id: I4232f50f048fa05e911e5de3aa9ec1530931b461
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2397
Tested-by: build bot (Jenkins)
Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-15 06:51:38 +01:00
Ronald G. Minnich c1ee8641cb libpayload: make functions static that are unused outside memory.c
The default_ functions in memory.c are only used to initialize a weak
variable.  They should not be used outside memory.c. Make them
invisible.

Remove the declaration from libpayload.h. For real this time.

Change-Id: Id54c1fd172c78748f01a958ce4065dd0eb53bbc3
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2394
Tested-by: build bot (Jenkins)
Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-15 06:51:17 +01:00
Ronald G. Minnich f2e10cb544 libpayload: Use an appropriate range of memory when looking for cb tables.
These live at the bottom of memory on x86, but that's IO mapped on the exynos.
The particular range used will likely need to be configurable, but this will
make it work in one more case than it used to.

Change-Id: I4d4963b9732cf538d00f8effb4398f30cbbde6aa
Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2410
Tested-by: build bot (Jenkins)
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-15 03:19:06 +01:00
Ronald G. Minnich 2149ad3c9c libpayload: add a ldscript for arm
I think this needs to be its own ldscript. I'm pretty sure this one
is going to need some work however. Is libpayload PIC? That would be
best if so.

Change-Id: I44578d70dfa72de527af8901a86583c2a60130ec
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2398
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
2013-02-15 01:13:11 +01:00
Ronald G. Minnich c2e8cf5675 libpayload; put the ldscript into an arch-dependent directory path
Since it's utterly architecture-dependent, put it in arch/x86.
Avoid the temptation to make yet another directory with just one
file in it. Fix the makefile to pick up the proper arch-dependent script.

Change-Id: I21ea02551a97bdcbc38419714f3b38cf8335c178
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2389
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-14 21:32:02 +01:00
Hung-Te Lin d01d0368f4 libpayload: New CBFS to support multiple firmware media sources.
Upgrade CBFS in libpayload to use new media-based implementation from coreboot
( http://review.coreboot.org/#/c/2182/ ).

Old CBFS functions (cbfs_find, cbfs_find_file, get_cbfs_header) are still
supported, although the recommended way is to use new CBFS API.

To migrate your existing x86 payload source:
	- Change cbfs_find to cbfs_get_file
	- Change cbfs_find_file to cbfs_get_file_content
	- Prefix every CBFS call with a CBFS_DEFAULT_MEDIA argument.

Ex, char *jpeg_data = cbfs_find_file("splash.jpg", CBFS_TYPE_BOOTSPLASH);
 => char *jpeg_data = cbfs_get_file_content(
		CBFS_DEFAULT_MEDIA, "splash.jpg", CBFS_TYPE_BOOTSPLASH);

The legacy setup_cbfs_from_{ram,flash} is also supported, although the better
equivalent is to make a new media instance:
	struct cbfs_media ram_media;
	init_cbfs_ram_media(&ram_media, start, size);
	char *data = cbfs_get_file_content(&ram_media, "myfile", my_type);

Verified by being successfully linked with filo.

Change-Id: If797bc7e3ba975d7e3be905c59424f7a93b8ce11
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2191
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-12 11:34:20 +01:00
Marc Jones e876819975 Fix libpayload xcompile xgcc path
The libpaylaod xcompile script path to xgcc should look
for coreboot/util, not libpayload/util.

Change-Id: I565801549cdcdfcf55ecef1b543a982f969f435b
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/2261
Tested-by: build bot (Jenkins)
Reviewed-by: Steven Sherk <steven.sherk@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-01 20:15:47 +01:00
Anton Kochkov c07fb15f17 libpayload: add EHCI QH/qTD debugging
Improve USB debugging for EHCI by adding dump_qh
and enhacing dump_td to dump all queue chain and information.

Change-Id: Ia8ecf19c6dac085cf9558bdf659a5e74ce332714
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/2053
Tested-by: build bot (Jenkins)
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-02-01 11:22:59 +01:00
Paul Menzel e1ea5151de libpayload: Update README with Git repository URL and directory location
Change-Id: I3e068f5e6c1eb875df0885c0ce43a03082be31a5
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2228
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30 17:36:22 +01:00
Stefan Reinauer cc5b344662 Project PIANO aka tianocoreboot
This is a Tiano Core loader payload based on libpayload.  It
will load a Tiano Core DXE core from an UEFI firmware volume
stored in CBFS.

Currently Tiano Core dies because it does not find all the UEFI services it needs:

coreboot-4.0-3316-gc5c9ff8-dirty Mon Jan 28 15:37:12 PST 2013 starting...
[..]
Tiano Core Loader v1.0
Copyright (C) 2013 Google Inc. All rights reserved.

Memory Map (5 entries):
  1. 0000000000000000 - 0000000000000fff [10]
  2. 0000000000001000 - 000000000009ffff [01]
  3. 00000000000c0000 - 0000000003ebffff [01]
  4. 0000000003ec0000 - 0000000003ffffff [10]
  5. 00000000ff800000 - 00000000ffffffff [02]

DXE code:  03e80000
DXE stack: 03e60000
HOB list:  03d5c000

Found UEFI firmware volume.
  GUID: 8c8ce578-8a3d-4f1c-9935-896185c32dd3
  length: 0x0000000000260000

Found DXE core at 0xffc14e0c
  Section 0: .text     size=000158a0 rva=00000240 in file=000158a0/00000240 flags=60000020
  Section 1: .data     size=00006820 rva=00015ae0 in file=00006820/00015ae0 flags=c0000040
  Section 2: .reloc    size=000010a0 rva=0001c300 in file=000010a0/0001c300 flags=42000040

Jumping to DXE core at 0x3e80000
InstallProtocolInterface: 5B1B31A1-9562-11D2-8E3F-00A0C969723B 3E96708
HOBLIST address in DXE = 0x3E56010
Memory Allocation 0x00000003 0x3E80000 - 0x3EBFFFF
FV Hob            0xFFC14D78 - 0xFFE74D77
InstallProtocolInterface: D8117CFE-94A6-11D4-9A3A-0090273FC14D 3E95EA0
InstallProtocolInterface: EE4E5898-3914-4259-9D6E-DC7BD79403CF 3E9630C

Security Arch Protocol not present!!

CPU Arch Protocol not present!!

Metronome Arch Protocol not present!!

Timer Arch Protocol not present!!

Bds Arch Protocol not present!!

Watchdog Timer Arch Protocol not present!!

Runtime Arch Protocol not present!!

Variable Arch Protocol not present!!

Variable Write Arch Protocol not present!!

Capsule Arch Protocol not present!!

Monotonic Counter Arch Protocol not present!!

Reset Arch Protocol not present!!

Real Time Clock Arch Protocol not present!!

ASSERT_EFI_ERROR (Status = Not Found)
ASSERT /home/reinauer/svn/Tiano/edk2/MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c(461): !EFI_ERROR (Status)

Change-Id: I14068e9a28ff67ab1bf03105d56dab2e8be7b230
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2154
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30 17:34:40 +01:00
Stefan Reinauer 658e4d3ea9 libpayload: use $(DOTCONFIG) instead of .config
When overriding the DOTCONFIG variable, make install
will fail in libpayload.

Change-Id: I332be3a4ca2620a32a6f5fbe683e6c71f0d6a9e9
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2178
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-25 20:06:46 +01:00
Stefan Reinauer 09e16dc215 libpayload: Style fixes
Change-Id: Ic3164fbffd8da6bd9d506d80e425ad89efc0f1af
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/2144
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-01-15 09:29:30 +01:00
Hung-Te Lin 086842a13e Change "VERSION*" to more determined name "CBFS_HEADER_VERSION*".
The 'VERSION' in CBFS header file is confusing and may conflict when being used
in libpayload.

Change-Id: I24cce0cd73540e38d96f222df0a65414b16f6260
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2098
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-04 06:27:33 +01:00
Stefan Reinauer 7299c139c5 PDcurses: Delete automatically created (and unused) files
Change-Id: Iefe0872d36c3a5d8ef42e62325838b7f09b389d2
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2034
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
2012-12-20 14:46:29 +01:00
Patrick Georgi 69e3de3393 libpayload: Another usb fix
Change-Id: I91b18fadbf17562f8b48e233631653f2a18c037c
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/2063
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-20 09:31:01 +01:00