F14GetNbCofVidUpdate() is declared elsewhere to be of type
F_CPU_IS_NBCOF_INIT_NEEDED, which is supposed to return a boolean value
(not an AGESA status). This is fixed in the corresponding f15tn and
f16kb code, so apply the same change here. This fixes a compiler error
when using LTO.
Change-Id: Ifc44e2c0467f8bd1f537b5a69c501ba51053d3d9
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Allocate storage for the BERT reserved memory in cbmem, and add it in
response to a romstage hook. Add a Kconfig option for adjusting the
size reserved. This is different from the Stoney Ridge implementation
where it was intentionally oversized to ease MTRR use and to keep TSEG
aligned.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4759154d394a8f5b35c0ef0a15994bbef25492e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38694
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tioga Pass platform use GPIO pin of GPP_B20 for POST complete,
BIOS needs to configure this pin for BMC to poll,
so it knows when to start to access other components.
Tested=Read GPIO status (GPIOAA7) in OpenBMC, the value is 0,
the command and result are shown as below,
root@bmc-oob:~# cat /tmp/gpionames/FM_BIOS_POST_CMPLT_N/value
0
root@bmc-oob:~#
Change-Id: I134f80153461c5acd872587038a2207586b658dd
Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
EFS2 allows EC RO to enable PD for special cases. When doing so, it sets
NO_BOOT flag to avoid booting the OS. AP needs to get NO_BOOT flag from
Cr50 and enforce that.
This patch makes verstage get a boot mode and a mirrored hash stored
in kernel secdata from Cr50.
This patch also makes romstage write an expected EC hash (a.k.a. Hexp) to
Cr50 (if there is an update).
BUG=b:147298634, chromium:1045217, b:148259137
BRANCH=none
TEST=Verify software sync succeeds on Puff.
Signed-off-by: dnojiri <dnojiri@chromium.org>
Change-Id: I1f387b6e920205b9cc4c8536561f2a279c36413d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
tlcl_cr50_get_boot_mode gets the boot mode from Cr50. The boot mode
tells coreboot/depthcharge whether booting the kernel is allowed or
not.
BUG=b:147298634, chromium:1045217, b:148259137
BRANCH=none
TEST=Verify software sync succeeds on Puff.
Signed-off-by: dnojiri <dnojiri@chromium.org>
Change-Id: Iadae848c4bf315f2131ff6aebcb35938307b5db4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40388
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tigerlake platform does not have built in eMMC/SD support so all
this code is unused and can be removed.
Change-Id: I70ff983d175375171d5a649378f32f1062c0876d
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40372
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The eMMC/SD interface is not present in all Intel platforms so this
change removes the default enable for the storage controller and
instead enables it in the specific SoCs that do provide it.
Currently this includes all platforms except Tigerlake.
Change-Id: I8b6cab41dbd5080f4a7801f01279f47e80ceaefd
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Type C connector class driver in kernel (v5.4) expects the Type C ACPI
device under ChromeEC ACPI device scope. Currently the Type C ACPI
device is populated under ChromeEC device's parent. This leads to
incorrect casting of Type C's parent device and hence a crash. Move the
Type C device under ChromeEC ACPI device.
BUG=b:153518804
TEST=Build and boot the mainboard. Ensure that the USBC ACPI device is
populated under ChromeEC ACPI device.
Scope (\_SB.PCI0.LPCB.EC0.CREC)
{
Device (USBC)
{
Name (_HID, "GOOG0014") // _HID: Hardware ID
...
}
}
Change-Id: I628489bc420d7a3db4ad3cb93d085d568c6de507
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Adds a new macro that allow to set the DRIVER or ACPI as host software
ownership for the GPI pad using the parameter own. Thus, this macro can
define more variants for pad configuration than others.
This is necessary to describe in more detail the configuration for the
Tioga Pass OCP server [1] and other boards. In addition, these changes
will be used to automatically generate macros [2] and great simplify
this task.
[1] https://review.coreboot.org/c/coreboot/+/39427
[2] https://review.coreboot.org/c/coreboot/+/35643
Change-Id: I9c191fb6935e94da6e296f8fee0b91a973534e1a
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add a defconfig which allows to place a large uImage/FIT payload
in it to boot test the binary on qemu-system-aarch64 using u-root
and kexec-tools.
Change-Id: I95ca187b68ff883152421bd7612b494cd63e8d02
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add command to query the EC for the keyboard layout. Also
add supporting data structures for the exchange.
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I26aff6dd0e701e0cecb3b66bc54c5a23688f0109
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Begin a file for GUIDs used by the FSP.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ied5c5085ea8ed55439192be8a44fa401aeb559a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38697
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
psp_print_cmd_status only needs data from the mbox buffer header and not
the whole buffer. This avoids type casts when the buffer type isn't
mbox_default_buffer.
BUG=b:153677737
Change-Id: I8688b66fefe89fc4f3ce2207d4360ceb2dbaef12
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40412
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Implement the MboxBiosCmdSmmInfo function to inform the PSP of the SoC's
SMM configuration. Once the BootDone command is sent, the PSP only
responds to commands where the buffer is in SMM memory.
Set aside a region for the core-to-PSP command buffer and the
PSP-to-core mailbox. Also add an SMM flag, which the PSP expects to read
as non-zero during an SMI.
Add calls to soc functions for the soc to populate the trigger info and
register info (v2 only).
Add functions to set up the structures needed for the SmmInfo function
in Picasso support. Issue a SW SMI, and add a new handler to call the
new PSP function.
BUG=b:153677737
Change-Id: I10088a53e786db788740e4b388650641339dae75
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add C621A, C627A and C629A SKU IDs. C621A is used in the Whitley Product.
We need to add device ID for setting LPC resources.
Refer to Intel C620 series PCH EDS (547817).
Change-Id: I19a4024808d5aa72a9e7bd434613b5e7c9284db8
Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40395
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 991ee05 ("mb/gigabyte/ga-h61m-s2pv: rename to ga-h61m-series")
renamed the mainboard folder from `ga-h61m-s2pv` to `ga-h61m-series`,
but the MAINTAINERS file was not updated accordingly. Correct that.
Change-Id: I8119e29912e04ab57bebb96f37a4147afbb4d56e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
DSDT can be bigger than 0x10000 bytes, so increase the space up to 1MB
for an ACPI table and support lines in acpidump.log with address
higher than 0x10000.
Change-Id: Iaadcfd0964c1c516e9e39d6cbfe41ec9a8c45e9d
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31759
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since SeaBIOS rel-1.7.5 CONFIG_THREAD_OPTIONROMS is not present in its
config. The threaded hardware initialization during optionrom execution
is now controlled with a CBFS file. Add appropriate integer to CBFS when
threaded hardware initialization is selected in coreboot's Kconfig.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9b5a532b609c6addf31ccdb6be03ff2e937ad326
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Obtaining the CBI_TAG_BOARD_VERSION value wasn't in the code base.
Add the binding for it so it can be used.
BUG=b:153640981
Change-Id: Ie2f289631f908014432596448e56b5048a196a10
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Don't set legacy timing values that don't affect the hardware but
enable the OOB retry mode as already done on the AHCI path.
Change-Id: I0b078d7790ca801a89066ef6a161d900be5eb778
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I4d9bc98863c4f33c19e295b642f48c51921ed984
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37069
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The `USE_BLOBS` config only exists for idealistic reasons. If we would
allow us to use blobs by default, we wouldn't need that option and could
just always do it. It's generally debatable for the project as a whole,
but not per board/subject.
Change-Id: I8591862699aef02e5a4ede32655fc82c44c97555
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
A space was missing before the asterisks.
Change-Id: I1cb62a9efc8e15c09cdebb49956f0edeb032beb3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Remove extra USB port entry because it came in from copy
patch from the previous board and configure USB over-current
pins as per JSLRVP.
Change-Id: If9df8e330d31ed81207dfdfa2ab96fd4d49f3f0c
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39403
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Legacy mode is supposed to help with IDE controller drivers that don't
know Intel's "native" IDE interface. We extend the `sata_mode` NVRAM
variable to provide the following choices:
* 0 "AHCI" - AHCI interface
* 1 "Compatible" - Intel's "native" interface
* 2 "Legacy" - Legacy interface
Change-Id: I0e7a4befa02772f620602fa2a92c3583895d4d1c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
CLKRUN_EN bit available for mobile is reserved on desktop SKUs.
PSEUDO_CLKRUN_EN bit available for desktop is reserved for mobile SKUs.
Configure these bits accordign to SKU.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5295eb2bec27c77f800cc2ade9093e97ede47789
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add a new psp.c file so the base address can be determined, and select
the common/block/psp feature.
BUG=b:153677737
Change-Id: I322fd11a867a817375ff38a008219f9236c4f2ea
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/2020368
Tested-by: Eric Peers <epeers@google.com>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40296
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function is only needed and valid for the 1st generation PSP
interface used on stoneyridge.
BUG=b:153677737
Change-Id: Ia1be09c32271fe9480a0acbe324c4a45d8620882
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It's relatively slow to boot. It takes 1.5s to get to the payload.
In timestamps there are entries related to TPM, which are somewhat
weird given that the TPM is not enabled on this device (buggy).
TESTED: boot X60, with CONFIG_H8_FN_KEY_AS_VBOOT_RECOVERY_SW=y you
can force the recovery bootpath.
Change-Id: Ia9666194e98b7d23b97eaff08e6177684e35eca7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
We decided to add a third RAM_CODE pin to the Trogdor family for devices
after rev1. This patch adds support to read it. Since the newly used pin
was previously unconnected (not pulled down) on rev1, this will change
the RAM_CODE result for previous versions (and actually make it
undetermined until we enable tri-state). But since we're not actually
using RAM_CODE for anything yet, and since those are development
revisions that will eventually be discontinued, this should be fine.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I9b52982f17646a305b1a3e2c7d37606a7c38d0c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
Update tdp_pl1_override value to 15W for CML-U based nightfury platform.
BUG=None
BRANCH=firmware-hatch-12672.B
TEST=Built
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Ib0155b961b9d304bed2e9456c4964ebd598af4dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
TCSS TBT PCIE root ports scope type was mistakenly set to PCI_ENDPOINT.
Fix the scope type to be PCI_SUB.
BUG=b:141609884
TEST=Booted to kernel and verified no TBT PCIE root ports scope
type mismatch error in kernel log.
Change-Id: I844e7e9583992be496223fb51f24c5aa24fc7d21
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reference Drallion to add device tree for Melfas touch screen.
BUG=b:152924290
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I7b0a42119891c6c2d5978d7f33eefffa2d62df76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Since the first LFPS timeout causes xHCI to enter compliance
mode, the SS hub cannot be enumerated. The resolution is to
disable xHCI compliance mode.
BRANCH=octopus
BUG=b:153782196
TEST=Verified usb operation successfully.
Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com>
Change-Id: If0bf68c8cf0a2a3b857395b6b82e46cc384ba65c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39874
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>