Remove files that aren't needed for the picasso port.
Remove traces of AGESA v5 (includes binaryPI support files). Remove
SPD helper.
Picasso (and all AMD Family 17h processors) have a very different
boot flow from previous products. Memory is initialized by the PSP
before the x86 processor is released from reset. The SPD is read by
the PSP, so it's not needed in coreboot.
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I743ffd6058982f8f182ea4d73172a029967f3ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
So that everyone can see what's being updated from stoney, we're
starting with a direct copy of the stoney directory. There are
arguments both for and against doing it this way, but I believe
This the most transparent way. We've moved much of the duplicated
stoney code into the soc/amd/common directory and will continue
that work as it becomes obvious that we have unchanged code between
the SOCs.
Makefile.inc has been renamed as makefile.inc so that it won't
build in jenkins until the directory is updated.
Other than that change, this is an exact copy of the stoneyridge
SOC directory which will be updated in the follow-on commits in
the patch train.
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I6809bd1eea304f76dd9000c079b3ed09f94dbd3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32407
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For the PCI_VENDOR_ID_ATI case, we can rely on
pci_rom_acpi_fill_vfct() to make the call if necessary.
For hardware other than ATI, pci_rom_probe() was already
called from pci_rom_ssdt() and pci_dev_init(), so
PCI_ROM_ADDRESS BAR is already enabled, if requested so.
Change-Id: I0ea893a9ac7ba480840ebf5570d8fe0d9e20938f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
The function pci_rom_probe() may be called multiple times
for a device. For cases where CBFS does not contain optionrom
file, only the first time probing for the on-board ROM
chip worked.
PCI_ROM_ADDRESS_ENABLE is set on the first run. Mask out all
the reserved bits of PCI_ROM_ADDRESS register to get correct
physical address for rom_header.
Change-Id: I14374954af09201494bf2f13e5a6e4dc640c05ee
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
* Add architecture independend way of clearing all DRAM
* Implemented in ramstage as MTRRs need to be set to speed up
clearing. Takes up to 15 seconds per GiB otherwise.
* Use memset_pae on x86
* Add quirks for FSP1.0
Tested on P8H61M-Pro:
* Clears 4GiB in less than 1 second
Tested on wedge100s:
* Clears 8GiB in 2 seconds
Change-Id: Idaadb8fb438e5b95557c0f65a14534e8762fde20
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31550
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To clear all DRAM on x86_32, add a new method that uses PAE to access
more than 32bit of address space.
Add Documentation as well.
Required for clearing all system memory as part of security API.
Tested on wedge100s:
Takes less than 2 seconds to clear 8GiB of DRAM.
Tested on P8H61M-Pro:
Takes less than 1 second to clear 4GiB of DRAM.
Change-Id: I00f7ecf87b5c9227a9d58a0b61eecc38007e1a57
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31549
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Banner string format has been changed (CB:30935). We should update our
regular expression correspondingly.
Also add "verstage" into the stage search list since some boards (e.g.,
Kukui) might start console initialization at verstage.
Change-Id: I16eba3ac5e203e80b0bfd42a4294401dbccd4463
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
These functions are only used in ifdtool, so they can be made static.
Change-Id: Ia48bfecb89a7445dbd0f140acb5ac0592da2ebe7
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Fix error "Invalid option -A" by adding "A" to options list.
Also, atoi does not parse hex string, for instance 0x200 is interpreted as 0,
and this causes a failure when updating second FIT table using -j option.
Use strtol instead of atoi
BUG=none
BRANCH=none
TEST=Build and boot hatch after enabling dual bootblock feature.
Change-Id: Ib227437f88ffcccda1ce2f20a9ab098e5aa091c7
Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Since ttyS0 isn't used for UART0, configure ttyS4 as default
Change-Id: Ia0469226253b08328807d5401c05633296e43d22
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33785
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
No message is reported in tlcl_lib_init() when tis_init() or tis_open()
returned an error value.
Add debug string.
BUG=N/A
TEST=Build binary and verified logging on Facebook FBG-1701
Change-Id: I522e488ddd3a1bd94a1a8c8470c757bd79c6d5c5
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Prior to commit
d731a24 src/cpu/intel: Set get_ia32_fsb function common
value of 200 was silently used as a default for fsp_rangeley
(model_406dx) in cpu/x86/lapic/apic_timer:set_timer_fsb().
After the commit, get_ia32_fsb() returns -2, eventually
resulting with divide-by-zero in timer_monotonic_get(), as
get_timer_fsb() returns 0.
Add Rangeley CPUID model 0x4d to get_ia32_fsb() as a fix,
using BCLK = 100 MHz based on the comments in
northbridge/intel/fsp_rangeley/udelay.c
Change-Id: I306f85dba9b1e91539fc0ecc9b2ae9d54f82be6c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This patch makes CONFIG_RAMPAYLOAD default enable upon selection
of HAVE_RAMPAYLOAD kconfig from mainboard for x86 platform.
Without this CL, CONFIG_RAMPAYLOAD is still disabled although
mainboard has selected CONFIG_HAVE_RAMPAYLOAD.
Change-Id: I40308bbf970a0dbe5f7e2086ed8a7a70c2a3a32c
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33859
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
calculate_color() uses the 'fbinfo' global that is initialized by
cbgfx_init(), so we need to run the latter before we can run the former
or we get a null pointer access.
Change-Id: I73ca8e20ca36f64d699379d504fd41dc2084f157
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
It looks like in days gone by that these switches were once parts of
loops that incremented 'index' as they went along. However, we don't
have any loops anymore, so remove the needless increments and streamline
the rest of the assignments.
Change-Id: Iaabee984333c273af7810f9c11ed26bbb2a995d1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
- Add documentation comment
- Use 'unsigned int' to make checkpatch happy
- Return early if no more links need to be added
- Add error handling if malloc fails
- Clean up whitespace
Change-Id: I70976ee2539b058721d0ae3c15edf279253cd9b7
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229634
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33238
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function is duplicated in many AMD northbridge files, and all
the definitions have started to diverge somewhat. This moves a single
copy into device utils and deletes the rest. The function definition
from nb/amd/amdfam10 was chosen to be kept, since it contains several
fixes from commit 59d609217b (AMD fam10: Fix add_more_links) that
the others don't have.
For the ease of diffing, the checkpatch lints and other small cleanups
will be done in a follow-up patch.
Change-Id: I5ea73126092449db3f18e19ac0660439313072de
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33237
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All the clocks are switched on anyway, so this series of if statements
isn't needed.
Change-Id: I654043fd6736caa6890fd697015c577ddaa7cd41
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 13473{27-30}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
By default printram() expands to nothing in normal builds, and so
scan-build thinks that the assignment to reg8 is unused. Inline the
value of reg8 into the print statement to silence the warning.
Change-Id: I921fe08949c4135367bee9646b3b365097fab19e
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Pstate_num is initialized later when it is used as a loop index, so this
duplicate assignment can be removed.
Change-Id: I71429bd3306139a823ed39e751d779e4d874f657
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
FSP sets the use of the 8254 timer via the Enable8254ClockGating
UPD, which defaults to enabled, overriding what is set by coreboot.
Per the FSP integration guide, this UPD needs to be disabled when
a legacy OS is booted (ie, when SeaBIOS is used as the payload).
Add a Kconfig option to set the UPD properly based on payload
selection, and remove the existing coreboot code in lpc.c since
it is either ineffective or being overridden by FSP.
Test: build/boot out-of-tree WHL board with both SeaBIOS and
Tianocore, ensure 8254 timer usage set correctly for each.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I0e888bf754cb72093f14fc02f39bddcd6d288203
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
It has been observed by me and Elisenda Cuadros / Gergely Kiss [1] that
the boot process of this board is super slow when UART 0 is being used -
even if nothing is connected to it. Enable UART according to
CONFIG_UART_FOR_CONSOLE - and, if UART 0 is selected, it will be initialized
at romstage and this problem will not happen.
[1] https://mail.coreboot.org/pipermail/coreboot/2018-February/086132.html
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I6579aa8fd092da84f8afdcc33496db45c582919f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Correct i2c address of trackpad. It should be 0x20.
BUG=None
BRANCH=None
TEST=Verified trackpad works on pre-evt system
Change-Id: I7ded21ce8ff9e907e436777a27edb4273512011d
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
* Add support for Linux 5.x
** Select PCI, which isn't the default anymore with 5.x
** Select google firmware driver, which wasn't build any more
* Add support for Intel LPSS uart
** Select MFD and MFD_INTEL_LPSS_PCI
** Increase console count to 32
* Add support for coreboot framebuffer
** Select FB_SIMPLE
* Add support for eMMC/SDHCI
** Select MMC_SDHCI_*
* Add support for u-root's localboot
** Select KEXEC_FILE_LOAD
** Select FIRMWARE_MEMMAP
Stats:
* Kernel size 1.9MiB
* U-root (core + systemboot) 4.6MiB
Tested on Intel APL Up² board:
* Fixes non working console on APL Up2 board and eMMC bootmedia shows up.
* Allows to boot GNU/Linux from eMMC using 'localboot'
Change-Id: Ib5bd33531741e588ac7d5ff6a02b0482f6655ddf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
We want to catch warnings as early as possible.
Change-Id: Ifdb2ff8f7973d557a437ac127e073306f76ca6f6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33848
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop hacked uart code and use the generic 8250 uart driver for ns16550a.
Tested on qemu-system-riscv64:
* The UART is still working.
Change-Id: I6efda913fa39e0cfa466b52c570572aca90dacdf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33735
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The printk has no effect as console_init() hasn't been called.
Also drop unused variables and headers.
Change-Id: I5bf5a8822c69bbcc3de1de460d19585b8330649f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
This string is printed in dump_te_table() so we should make sure it's
properly null-terminated.
This fixes Coverity issue 1401305.
Change-Id: I45827f552c2d8a4e01b50a699ac88ee457043282
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
UART RX needs to be re-initialized in libpayload
as it is getting reset at the end of coreboot.
Change-Id: I7820bd7afd2e5f81e21a43f330ed42d3a732d577
Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
By default, the LPC SIRQ mode is set to Quiet mode. Therefore, COM-port
from the SurerIO chip don't work correctly after the LPC controller (PCI
0:1f.0) initialization. Console output is broken. The patch fixes this
bug by overriding the serirq_mode option in the devicetree.cb to set
Continuous SIRQ mode
Change-Id: I37e26b271fb61f6c0343d6bf65c029924df82caf
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33801
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add files to introduce a memory clearing framework.
Introduce Kconfig PLATFORM_HAS_DRAM_CLEAR that is to be selected by
platforms, that are able to clear all DRAM.
Introduce Kconfig SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT that is user
selectable to always clear DRAM on non S3 boot.
The function security_clear_dram_request tells the calling platform when
to wipe all DRAM. Will be extended by TEE frameworks.
Add Documentation for the new security API.
Change-Id: Ifba25bfdd1057049f5cbae8968501bd9be487110
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Depthcharge no longer reads this data structure, and uses
the vboot workbuf in vboot_working_data instead.
Since vboot2 downstream migration is not yet completed, the
vboot2 -> vboot1 migration code is still required, but has
been relocated to depthcharge.
BUG=b:124141368, b:124192753
TEST=make clean && make runtests
BRANCH=none
Change-Id: I769abbff79695b38d11fb6a93c2b42f64d4bafde
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33535
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A FPMCU power-control pin (GPP_C11) is added to the latest
hatch reference schematic.
Even though this is not implemented in hatch rev1 board, the future
hatch family boards with FPMCU should all have this control pin.
On the old boards without this control pin, GPP_C11 is a floating TP,
and thus this patch should be backward-compatible.
BUG=b:130307667, b:135216932
TEST=build
Signed-off-by: Philip Chen <philipchen@google.com>
Change-Id: I6a84eeb6aab562258e749a8a5d09dadfa0e43587
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
There is no need to add internal termination (PU/PD) on the
not-connected pads. This change gets rid of the terminations on the NC
pads.
Change-Id: I3df538d7127e5ef75e6e6ff9db3524e26f0450ed
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This allows to use Kconfig options to differentiate between SOC
variants.
Change-Id: Ica11c68377e3d0dc8a8f48198e01a74d7bebe642
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33559
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Martin Roth