The assumption up to this point was that if the system had an x86
processor, verstage would be running on the x86 processor. With running
verstage on the PSP, that assumption no longer holds true, so exclude
pieces of code that cause problems for verstage on the PSP.
As a generalization, remove all-y for CONFIG_ARCH_xx guarded
makefiles.
BUG=b:158124527
TEST=Build and boot on Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ia7dcfed699ee1c0cd5a5250431c5f05bf6d8b9c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add the AMD supplied code (modified to work with GCC) to the vendorcode
directory. Verstage will be running on the PSP as a userspace
application under the bootloader, which is what bl_uapp signifies.
AMD is still working on documentation for the entire PSP userspace
application interface.
BUG=b:158124527
TEST=Build & boot psp_verstage on Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ie740c89afe2277eff279fc5c94f88ffd43a78a37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Because the PSP maps the MMIO addresses that are used to non-
deterministic addresses, the accesses need to be able to find
the address at runtime.
BUG=b:158124527
TEST=Build & boot with Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I68305e0f31956c57bfdee42025bdfe938703e82d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42061
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Exclude pieces of console code from the vboot if running before
bootlock. The PSP verstage code will re-implement some of
these in its own code.
BUG=b:123887623
TEST=Build with following patches
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ifc9fb0810e0816fe0a68e52287eda6145043a619
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41815
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For AMD's family 17h, verstage can run as a userspace app in the PSP
before the X86 is released. The flags for this have been made generic
to support any other future systems that might run verstage before
the main processor starts.
Although an attempt has been made to make things somewhat generic,
since this is the first and currently only chip to support verstage
before bootblock, there are a number of options which might ultimately
be needed which have currently been left out for simplicity. Examples
of this are:
- PCI is not currently supported - this is currently just a given
instead of making a separate Kconfig option for it.
- The PSP uses an ARM v7 processor, so that's the only processor that
is getting updated for the verstage-before-bootblock option.
BUG=b:158124527
TEST=Build with following patches
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I4849777cb7ba9f90fe8428b82c21884d1e662b96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
A looong time ago when cache_as_ram.S was built into romstage,
the stage was also linked twice. First at a fixed low address
and then again relocated at the final execute-in-place address.
Change-Id: Ic624feef6794f2c24e38459a45583d84fc07a484
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
When adding XIP stages on x86, the -P parameter was used to
pass a page size that covers the entire file to add. The same
can now be achieved with --pow2page and we no longer need to
define a static Konfig for the purpose.
TEST: Build asus/p2b and lenovo/x60 with "--pow2page -v -v" and
inspect the generated make.log files. The effective pagesize is
reduced from 64kB to 16kB for asus/p2b giving more freedom
for the stage placement inside CBFS. Pagesize remained at 64kB
for lenovo/x60.
Change-Id: I5891fa2c2bb2d44077f745619162b143d083a6d1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Keith Hui <buurin@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For add-stage command, --pow2page is equivalent of passing
-P log2ceil(sizeof stage). The sizeof stage can be hard to
determine in Makefile to be passed on the commandline.
Change-Id: If4b5329c1df5afe49d27ab10220095d747024ad6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This pulls in a newer version of the PSP-related blobs.
Change-Id: I6ff39260e9697512f78eb68435bd17ea83af35d5
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Picasso, Dali, and Pollock iGPU share the same PCI device ID, but need
different video BIOSes. This checks the vendor & device IDs along with
the revision and selects the correct video BIOS to use.
Also add the second VGA BIOS for Raven2-based SoCs and change all VGA
BIOS IDs to the format including the revision number.
Since SeaBIOS still expects the CBFS file name without the revision ID,
it won't find the VBIOS any more. As a temporary workaround add the
VBIOS for the silicon it will run on as VGA_BIOS_DGPU_*.
Change-Id: I8f48ecc3fbffddd21d1f830fbee26a09ac351e1c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://chromium-review.googlesource.com/2040455
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
• Based on FSP EAS v2.1 – Backward compatibility is retained.
• Add multi-phase silicon initialization to increase the modularity of the
FspSiliconInit() API.
• Add FspMultiPhaseSiInit() API
• FSP_INFO_HEADER changes
o Added FspMultiPhaseSiInitEntryOffset
• Add FSPS_ARCH_UPD
o Added EnableMultiPhaseSiliconInit, bootloaders designed for
FSP 2.0/2.1 can disable the FspMultiPhaseSiInit() API and
continue to use FspSiliconInit() without change.
FSP 2.2 Specification:
https://www.intel.com/content/www/us/en/intelligent-systems/intel-firmware-support-package/intel-fsp-overview.html
Change-Id: If7177a267f3a9b4cbb60a639f1c737b9a3341913
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41728
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If there is no installed audio daughter board on volteer then the
HDA driver in the kernel will crash on resume. In order to prevent
this disable the PCI device when AUDIO=NONE probe match is true.
BUG=b:147462631
TEST=boot on volteer and ensure that the PCI device at 0:1f.3 is gone
Change-Id: I4a436e1b76418030bf635427e490b54a713fdd33
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Zork family does not use OEM binary and so this change drops the
configs required for adding this binary.
Change-Id: Id38c67030e4055ab16934d1a900ee1cea5843b54
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This way drivers can wait for their devices to be enabled.
I also rewrote enable_aoac_devices to take advantage of
wait_for_aoac_enabled.
BUG=b:153001807
TEST=Trembyle builds
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8e653c857e164f90439e0028e08aa9608d4eca94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If the OS sets the target device state to D3, we need to clear it so we
can reestablish register access.
BUG=b:153001807
TEST=Boot trembyle with I2C powered off and see it power back on.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If9bd1b7cfa7b8d074226c4dcdefc1a44cad8b940
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This functionality is needed in the PSP and I can't include all of
southbridge.c.
BUG=b:153001807
TEST=Made sure trembyle still compiles
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3a38c655588d7836e1bd033e958a505774de871e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42324
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The legacy UARTs are supposed to default to off according to the
documentation (PPR for AMD Family 17h Model 18h). But legacy UART Range_0
is enabled after reset. The PSP might be enabling it or the documentation
might be wrong.
Having it enabled causes problems though. We have ACPI nodes defining
MMIO UARTs, and the kernel also probes for legacy UARTs. This results in
two drivers accessing the same device, one via MMIO and one via IO. I
suspect this was the cause of the garbage serial output.
Before the change you would see the following in the console:
[ 0.741108] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
After this change, we no longer see it.
BUG=b:152079780, b:157858890
TEST=Boot trembyle and make sure serial is still working.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I9d837e449b961dbb55d1301d2107838e26b3f892
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The purpose of pci_early_bridge_init() is to temporarily configure
PCIe rootport (or PCI bridge) on bus 0 to configure PCI device BARs
on the secondary bus. Currently used and tested only with UART_OXPCIE.
Since those BARs do not reset on stage changes, it is not necessary
to redo those steps for verstage or postcar. Note that the option
does not really work with many of the later platforms where PCIe
pins/links/lanes are configured late in FSP-M or similar blob.
Change-Id: I148f44c76c61edcfd8ab1c8c531cd2e6ca343130
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The start and end bus number in the MCFG ACPI table is inclusive.
Therefore, the number of buses decoded needs to be subtracted by
1.
BUG=b:158874061
Change-Id: Ic773bc1e0ccaa99af45d1a53919f6480887fa37e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42329
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enables the fourth thermal sensor for fan in DPTF for volteer
BRANCH=None
BUG=b:149722146
TEST= On volteer system check
`cat /sys/class/thermal/thermal_zone5/type` for TSR3
Signed-off-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com>
Change-Id: Ie11496828133aa71f1017f759516e2e5d3dff2d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Currently, configuring and reviewing DPTF parameters is difficult
because DPTF tables and methods are defined in static ASL files, and are
littered with #ifdefs which both define parameters and influence
behavior (e.g., whether a method is included or not). This patch train
is an effort to bring DPTF support to our ACPI DSDT/SSDT generation
framework.
This first patch is very minimal, and includes only creation of the
DPTF device (in the DSDT).
BUG=b:143539650
TEST=compiles (later tests get more comprehensive).
Change-Id: I14df9f422c911677aeea25552ac1822a9462c58a
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41883
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since we plan to use VMX, enable CPU_INTEL_COMMON.
BUG=b:157388365
TEST=tested on Volteer
Signed-off-by: Alex Levin <levinale@chromium.org>
Change-Id: I5e7bdb4310947dd8a94ee554834a67ce94377ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Correct a message of "Error: Can't add stage_cache 57a9e101 to imd".
ramstage is 0xffc90 and adding FSP-S (0x50000) failed. Increase the
reserved region of SMRAM to accommodate both images.
BUG=b:158704095
TEST=Boot Mandolin and check console log
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I51595d80d4779e995ec2a26e395cf95d666a309e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42314
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Added device hid info to the MST and LSPCON devices.
BRANCH=None
BUG=b:156546414
TEST=Manual tested and able to see update on sysfs and ssdt table
Signed-off-by: Shiyu Sun <sshiyu@chromium.org>
Change-Id: Iaef6c08f241ea671d1487a8524162dbb438b8e98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently, the logs are only checked, if retrieved locally. Moving it
after the if statement, now logs retrieved remotely are also checked.
The change in behavior is, that now all commands are executed first, so
before hitting this error, other errors might occur unrelated to the
console log.
Change-Id: I016bbde66c58a654042ad880c6007ddc1d143691
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch adds correct PL2 baseline setting and PsysPL2 for different
SKUs. There is no way to identify the barral jack power rating, the
assumption is following that ships with the product:
1. i3/i5/i7: 90W BJ
2. Celeron/Pentium: 65W BJ
For Type-C adapter, we don't have Pcritcial (10ms) data, keeps the
original settings as 90% of adapter rating for PsyspL2/PL4 and PL2
as min(PL2, 0.9n) where n is adapter rating power.
BUG=b:143246320
TEST=Run with U62 and Celeron CPU and ensure the PL2 settings are correct
Change-Id: Ib16d4f65707801b430f06892ab45ecfa7551593f
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
The Endeavour variant does not have a DisplayPort input so there's no
need to wait for it.
BUG=b:147830399
BRANCH=none
TEST=boot endeavour; check coreboot logs
Signed-off-by: Jeff Chase <jnchase@google.com>
Change-Id: I30c7c47f19a61ce66c6c923864d80870d2761859
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
ALIB function 1 needs to be called every time there is a change in
AC/DC state of the system. This change adds a wrapper method that can
be called by PNOT (method to notify system power state change) to
report to ALIB that system power state has changed i.e. AC <-> DC.
Additionally, this change drops the call to ALIB from _INI method
since the PWRS object might not be initialized correctly at that
point. Instead EC makes a call to PNOT when PWRS is initialized.
This wrapper also fixes the value of power state being passed into
ALIB. ALIB expects 0 = AC and 1 = DC. On the other hand, PWRS reports
1 as AC and 0 as DC. WAL1() takes care of inverting the PWRS state
before passing into ALIB.
BUG=b:157752693
TEST=Verified that WAL1() gets called on AC connect/disconnect.
Steps followed:
$ echo 1 > /sys/module/acpi/parameters/aml_debug_output
$ dmesg -w | grep ACPI
[ 76.306947] ACPI Debug: "EC: AC DISCONNECTED"
[ 76.307064] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x01"
[ 82.264946] ACPI Debug: "EC: GOT PD EVENT"
[ 82.539833] ACPI Debug: "EC: GOT PD EVENT"
[ 82.753721] ACPI Debug: "EC: GOT PD EVENT"
[ 82.843676] ACPI Debug: "EC: GOT PD EVENT"
[ 82.970596] ACPI Debug: "EC: AC CONNECTED"
[ 82.970659] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x00"
[ 83.047598] ACPI Debug: "EC: GOT PD EVENT"
[ 84.804733] ACPI Debug: "EC: GOT PD EVENT"
[ 86.317934] ACPI Debug: "EC: GOT PD EVENT"
[ 86.385920] ACPI Debug: "EC: GOT PD EVENT"
[ 86.515830] ACPI Debug: "EC: AC DISCONNECTED"
[ 86.515922] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x01"
[ 90.089062] ACPI Debug: "EC: GOT PD EVENT"
[ 90.357914] ACPI Debug: "EC: GOT PD EVENT"
[ 90.573812] ACPI Debug: "EC: GOT PD EVENT"
[ 90.662744] ACPI Debug: "EC: GOT PD EVENT"
[ 90.788706] ACPI Debug: "EC: AC CONNECTED"
[ 90.788835] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x00"
[ 90.865675] ACPI Debug: "EC: GOT PD EVENT"
[ 92.621793] ACPI Debug: "EC: GOT PD EVENT"
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1f2ade28ca35378ebf4647d8df3d2ea4d0b08096
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change calls \PNOT () method when AC power state is initialized
to allow platform code to take appropriate action.
BUG=b:157752693
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I089e9096f78728ddc5df2d8cb8f22f65b30b02dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This allows to remove references to CONFIG_DCACHE_RAM entries in
most cache_as_ram.S files. While Kconfig variable names appear
for every stage, linker symbol names will only appear in stages
they are valid in.
Also, linker scripts have LOG2CEIL which comes in handy to enforce
MTRR alignments.
Change-Id: I2fef3546d2bfea2d4d8f87aaf8376e5566fd6aaa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30872
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that Picasso uses its own memlayout.ld, always include id.ld in
arch/x86/memlayout.ld.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I04b59c2a273cad0a2e64dbc325c0b09fca254558
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42266
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Martin Roth