Commit Graph

15 Commits

Author SHA1 Message Date
Carl-Daniel Hailfinger 85acc09786 Add continuation ID support to jedec.c
The continuation ID code does not go further than checking for IDs of
the type 0x7fXX, but does this for vendor and product ID. The current
published JEDEC spec has a list where the largest vendor ID is 7 bytes
long, but all leading bytes are 0x7f. The list will grow in the future,
and using a 64bit variable will not be enough anymore.
Besides that, it seems that the location of the ID byte after the first
continuation ID byte is very vendor specific, so we may have to revisit
that code some time in the future.

(Suggestion for a new encoding:
Use a two-byte data type for the ID, the lower byte contains the only
non-0x7f byte, the upper byte contains the number of 0x7f bytes used as
prefix, which is the bank number minus 1 the vendor ID appears in.)

Add support for EON EN29F002AT.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3030 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-31 01:49:00 +00:00
Carl-Daniel Hailfinger 6d6146c377 Fix ATMEL 29C020 detection with flashrom. The JEDEC probe routine had
a delay of 10 us after entering ID mode and this was insufficient for
the 29C020. The data sheet claims we have to wait 10 ms, but tests have
shown that 20 us suffice. Allow for variations in chip delays with a
factor of 2 safety margin.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13 14:56:54 +00:00
Uwe Hermann dcb9abdf4c Some cosmetic cleanups in the flashrom code and output.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2873 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-17 23:55:15 +00:00
Ronald G. Minnich c63643dc90 Changes to flashrom to support the K8N-NEO3, first tested at Google on GSOC day :-)
Also minor changes to remove tab-space combinations where possible. 

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

Index: jedec.c
===================================================================
--- jedec.c	(revision 2847)
+++ jedec.c	(working copy)
@@ -281,7 +281,7 @@
 	// dumb check if erase was successful.
 	for (i = 0; i < total_size; i++) {
 		if (bios[i] != (uint8_t) 0xff) {
-			printf("ERASE FAILED\n");
+			printf("ERASE FAILED @%d, val %02x\n", i, bios[i]);
 			return -1;
 		}
 	}
Index: board_enable.c
===================================================================
--- board_enable.c	(revision 2847)
+++ board_enable.c	(working copy)
@@ -153,7 +153,8 @@
 		return 1;
 	}
 	/* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note:
-	   We can't use writecnt directly, but have to use a strange encoding */
+	 * We can't use writecnt directly, but have to use a strange encoding 
+	 */ 
 	outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port);
 	do {
 		busy = inb(port) & 0x80;
@@ -202,43 +203,39 @@
 /*
  * Helper functions for many Winbond Super I/Os of the W836xx range.
  */
-#define W836_INDEX 0x2E
-#define W836_DATA  0x2F
-
 /* Enter extended functions */
-static void w836xx_ext_enter(void)
+static void w836xx_ext_enter(uint16_t port)
 {
-	outb(0x87, W836_INDEX);
-	outb(0x87, W836_INDEX);
+	outb(0x87, port);
+	outb(0x87, port);
 }
 
 /* Leave extended functions */
-static void w836xx_ext_leave(void)
+static void w836xx_ext_leave(uint16_t port)
 {
-	outb(0xAA, W836_INDEX);
+	outb(0xAA, port);
 }
 
 /* General functions for reading/writing Winbond Super I/Os. */
-static unsigned char wbsio_read(unsigned char index)
+static unsigned char wbsio_read(uint16_t index, uint8_t reg)
 {
-	outb(index, W836_INDEX);
-	return inb(W836_DATA);
+	outb(reg, index);
+	return inb(index+1);
 }
 
-static void wbsio_write(unsigned char index, unsigned char data)
+static void wbsio_write(uint16_t index, uint8_t reg, uint8_t data)
 {
-	outb(index, W836_INDEX);
-	outb(data, W836_DATA);
+	outb(reg, index);
+	outb(data, index+1);
 }
 
-static void wbsio_mask(unsigned char index, unsigned char data,
-		       unsigned char mask)
+static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask)
 {
-	unsigned char tmp;
+	uint8_t tmp;
 
-	outb(index, W836_INDEX);
-	tmp = inb(W836_DATA) & ~mask;
-	outb(tmp | (data & mask), W836_DATA);
+	outb(reg, index);
+	tmp = inb(index+1) & ~mask;
+	outb(tmp | (data & mask), index+1);
 }
 
 /**
@@ -248,37 +245,80 @@
  *  - Agami Aruma
  *  - IWILL DK8-HTX
  */
-static int w83627hf_gpio24_raise(const char *name)
+static int w83627hf_gpio24_raise(uint16_t index, const char *name)
 {
-	w836xx_ext_enter();
+	w836xx_ext_enter(index);
 
 	/* Is this the w83627hf? */
-	if (wbsio_read(0x20) != 0x52) {	/* SIO device ID register */
+	if (wbsio_read(index, 0x20) != 0x52) {	/* Super I/O device ID register */
 		fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n",
-			name, wbsio_read(0x20));
-		w836xx_ext_leave();
+			name, wbsio_read(index, 0x20));
+		w836xx_ext_leave(index);
 		return -1;
 	}
 
 	/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */
-	wbsio_mask(0x2B, 0x10, 0x10);
+	wbsio_mask(index, 0x2B, 0x10, 0x10);
 
-	wbsio_write(0x07, 0x08);	/* Select logical device 8: GPIO port 2 */
+	wbsio_write(index, 0x07, 0x08);	/* Select logical device 8: GPIO port 2 */
 
-	wbsio_mask(0x30, 0x01, 0x01);	/* Activate logical device. */
+	wbsio_mask(index, 0x30, 0x01, 0x01);	/* Activate logical device. */
 
-	wbsio_mask(0xF0, 0x00, 0x10);	/* GPIO24 -> output */
+	wbsio_mask(index, 0xF0, 0x00, 0x10);	/* GPIO24 -> output */
 
-	wbsio_mask(0xF2, 0x00, 0x10);	/* Clear GPIO24 inversion */
+	wbsio_mask(index, 0xF2, 0x00, 0x10);	/* Clear GPIO24 inversion */
 
-	wbsio_mask(0xF1, 0x10, 0x10);	/* Raise GPIO24 */
+	wbsio_mask(index, 0xF1, 0x10, 0x10);	/* Raise GPIO24 */
 
-	w836xx_ext_leave();
+	w836xx_ext_leave(index);
 
 	return 0;
 }
 
+static int w83627hf_gpio24_raise_2e(const char *name)
+{
+	return w83627hf_gpio24_raise(0x2d, name);
+}
+
 /**
+ * Winbond W83627THF: GPIO 4, bit 4
+ *
+ * Suited for:
+ *  - MSI K8N-NEO3
+ */
+static int w83627thf_gpio4_4_raise(uint16_t index, const char *name)
+{
+	w836xx_ext_enter(index);
+	/* Is this the w83627thf? */
+	if (wbsio_read(index, 0x20) != 0x82) {	/* Super I/O device ID register */
+		fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n",
+			name, wbsio_read(index, 0x20));
+		w836xx_ext_leave(index);
+		return -1;
+	}
+
+	/* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */
+
+	wbsio_write(index, 0x07, 0x09);	/* Select logical device 9: GPIO port 4 */
+
+	wbsio_mask(index, 0x30, 0x02, 0x02);	/* Activate logical device. */
+
+	wbsio_mask(index, 0xF4, 0x00, 0x10);	/* GPIO4 bit 4 -> output */
+
+	wbsio_mask(index, 0xF6, 0x00, 0x10);	/* Clear GPIO4 bit 4 inversion */
+
+	wbsio_mask(index, 0xF5, 0x10, 0x10);	/* Raise GPIO4 bit 4 */
+
+	w836xx_ext_leave(index);
+
+	return 0;
+}
+
+static int w83627thf_gpio4_4_raise_4e(const char *name)
+{
+	return w83627thf_gpio4_4_raise(0x4E, name);
+}
+/**
  * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs.
  *
  * We don't need to do this when using LinuxBIOS, GPIO15 is never lowered there.
@@ -335,12 +375,12 @@
 	pci_write_byte(dev, 0x59, val);
 
 	/* Raise ROM MEMW# line on Winbond w83697 SuperIO */
-	w836xx_ext_enter();
+	w836xx_ext_enter(0x2E);
 
-	if (!(wbsio_read(0x24) & 0x02))	/* flash rom enabled? */
-		wbsio_mask(0x24, 0x08, 0x08);	/* enable MEMW# */
+	if (!(wbsio_read(0x2E, 0x24) & 0x02))	/* flash rom enabled? */
+		wbsio_mask(0x2E, 0x24, 0x08, 0x08);	/* enable MEMW# */
 
-	w836xx_ext_leave();
+	w836xx_ext_leave(0x2E);
 
 	return 0;
 }
@@ -487,9 +527,11 @@
 	{0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
 	 "gigabyte", "m57sli", "GIGABYTE GA-M57SLI", it87xx_probe_serial_flash},
 	{0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-	 "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise},
+	 "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise_2e},
+	{0x10de, 0x005e, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	 "msi", "k8n-neo3", "MSI K8N Neo3", w83627thf_gpio4_4_raise_4e},
 	{0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000,
-	 "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise},
+	 "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise_2e},
 	{0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01,
 	 NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m},
 	{0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118,
@@ -509,8 +551,8 @@
  * Match boards on LinuxBIOS table gathered vendor and part name.
  * Require main PCI IDs to match too as extra safety.
  */
-static struct board_pciid_enable *board_match_linuxbios_name(char *vendor,
-							     char *part)
+static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, 
+								char *part)
 {
 	struct board_pciid_enable *board = board_pciid_enables;
 
@@ -525,10 +567,11 @@
 			continue;
 
 		if (board->second_vendor &&
-		    !pci_dev_find(board->second_vendor, board->second_device))
+			!pci_dev_find(board->second_vendor, board->second_device))
 			continue;
 		return board;
 	}
+	printf("NOT FOUND %s:%s\n", vendor, part);
 	return NULL;
 }
 
@@ -545,20 +588,20 @@
 			continue;
 
 		if (!pci_card_find(board->first_vendor, board->first_device,
-				   board->first_card_vendor,
-				   board->first_card_device))
+					board->first_card_vendor,
+					board->first_card_device))
 			continue;
 
 		if (board->second_vendor) {
 			if (board->second_card_vendor) {
 				if (!pci_card_find(board->second_vendor,
-						   board->second_device,
-						   board->second_card_vendor,
-						   board->second_card_device))
+						board->second_device,
+						board->second_card_vendor,
+						board->second_card_device))
 					continue;
 			} else {
 				if (!pci_dev_find(board->second_vendor,
-						  board->second_device))
+							board->second_device))
 					continue;
 			}
 		}
@@ -582,7 +625,7 @@
 
 	if (board) {
 		printf("Found board \"%s\": Enabling flash write... ",
-		       board->name);
+			board->name);
 
 		ret = board->enable(board->name);
 		if (ret)


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2850 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-12 21:22:40 +00:00
Uwe Hermann 863c1bf525 Add '(C)' where it's missing (for consistency reasons).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2768 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-09 20:21:05 +00:00
Uwe Hermann 6c71f73786 Change all flashrom license headers to use our standard format.
No changes in content of the files.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2751 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-29 17:52:32 +00:00
Uwe Hermann ba9ce9f7f9 Cosmetic fixes (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2748 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-23 16:08:21 +00:00
Uwe Hermann 2fe239134c Drop a bunch of useless header files, merge them into flash.h.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2746 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-23 13:34:59 +00:00
Uwe Hermann 3a9bbc2cc8 Move code into *.c files, there's no reason to have it in header files.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2745 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-08-23 10:20:40 +00:00
Stefan Reinauer f8eea5cd1c big cosmetic offensive on flashrom. (trivial)
* Give decent names to virt_addr and virt_addr_2
* add some comments
* move virtual addresses to the end of the struct,
  so they dont mess up the initializer.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2689 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-23 17:20:56 +00:00
Uwe Hermann c7dc7cc196 Fix coding style of flashrom by running indent on all files:
indent -npro -kr -i8 -ts8 -sob -l80 -ss -ncs *.[ch]

Some minor fixups were required, and maybe a few more cosmetic
changeѕ are needed.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2643 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-09 10:17:44 +00:00
Giampiero Giancipoli 3ab63e1401 apply patch from Giampiero Giancipoli <gianci@email.it>:
Fixed write_page_write_jedec() in jedec.c. Added a check-reprogram loop
in the same function, to come around the high page write failure rate on
some boards.

This patch includes the changes suggested by Ron to simplify the control
flow.

It also includes trivial changes by me to make flashrom build on newer 
systems (libpci needs libz now). I also made a small type case compile fix
and proper return code handling in one or two places.

Signed-off-by: Giampiero Giancipoli <gianci@email.it>
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2505 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-22 00:29:51 +00:00
Stefan Reinauer 689c144839 Removing $Id$ tags as they have no meaning in SVN
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2386 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-23 14:33:54 +00:00
Li-Ta Lo 1a4f0707bb flasrom update from Stefan, resovle issue 21
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-11-26 21:55:36 +00:00
Stefan Reinauer 7d5c7a7f17 rename the directory to match the program name
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2102 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-11-24 10:45:34 +00:00
Renamed from util/flash_and_burn/jedec.c (Browse further)