Just a tiny mistake, but it made the console driver assume that
CMOS data isn't available.
Change-Id: I4e6f53e9ed59024de7b09333f82f0ce3235ef8f6
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/2323
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Not sure why this didn't bite us earlier..
src/device/oprom/realmode/x86.c: In function 'fill_lb_framebuffer':
src/device/oprom/realmode/x86.c:272:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:274:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:275:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:276:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:278:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:280:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:281:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:283:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:284:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:286:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:287:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:289:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:290:13: error: dereferencing pointer to incomplete type
Change-Id: Ie3b0f731a7b995e954a26e745b07fc122088ca9f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2321
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Exynos system clock can be initialized before RAM init, not necessary to be in
the very beginning (boot block). This helps reducing bootblock dependency.
Verified to boot on armv7/snow.
Note: this patch was originally introduced in 2308, but there were
some ordering issues so it was reverted.
Change-Id: Ibc91c0e26ea8881751fc088754f5c6161d011b68
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2320
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use same console initialization procedure for all ARM stages (bootblock,
romstage, and ramstage):
#include <console/console.h>
...
console_init()
...
printk(level, format, ...)
Verified to boot on armv7/snow with console messages in all stages.
Change-Id: Idd689219035e67450ea133838a2ca02f8d74557e
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2301
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Revise console source file dependency (especially for EARLY_CONSOLE) and
interpret printk/console_init according to EARLY_CONSOLE setting (no-ops if
EARLY_CONSOLE is not defined).
Verified to boot on x86/qemu and armv7/snow. Disabling EARLY_CONSOLE correctly
stops romstage messages on x86/qemu (armv7/snow needs more changes to work).
Change-Id: Idbbd3a26bc1135c9d3ae282aad486961fb60e0ea
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2300
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Early console should always be allowed to be turned on / off (for generating
production and debug versions), and should not be enforced by "select" Kconfig
rule.
A new "DEFAULT_EARLY_CONSOLE" is introduced for devices to select if they
prefer early console output by default.
Verified Kconfig value on qemu/x86 (default y by CACHE_AS_RAM), snow/x86
(default y by EXYNOS5 config), and intel/jarrell (default n).
Change-Id: Ib1cc76d4ec115a302b95e7317224f1a40d1ab035
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2307
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
For Exynos platforms, the UART component on pinmux must be first selected and
configured. This should be done as part of UART console initialization.
Note, that the current implementation hard-codes the device index as UART3,
while the base port can be assigned to different device in Kconfig. This will be
fixed later.
Verified to work on armv7/snow.
Change-Id: Ie63e76e2dac09fec1132573d1b0027fce55333a1
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2315
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The console drivers (especially serial drivers) in Kconfig were named in
different styles. This change will rename configuration names to a better naming
style.
- EARLY_CONSOLE:
Enable output in pre-ram stage. (Renamed from EARLY_SERIAL_CONSOLE
because it also supports non-serial)
- CONSOLE_SERIAL:
Enable serial output console, from one of the serial drivers. (Renamed
from SERIAL_CONSOLE because other non-serial drivers are named as
CONSOLE_XXX like CONSOLE_CBMEM)
- CONSOLE_SERIAL_UART:
Device-specific UART driver. (Renamed from
CONSOLE_SERIAL_NONSTANDARD_MEM because it may be not memory-mapped)
- HAVE_UART_SPECIAL:
A dependency for CONSOLE_SERIAL_UART.
Verified to boot on x86/qemu and armv7/snow, and still seeing console
messages in romstage for both platforms.
Change-Id: I4bea3c8fea05bbb7d78df6bc22f82414ac66f973
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2299
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This reverts commit 9029f4b63f
This patch needs to go at the end of the UART patch set. Sorry 'bout the confusion!
Change-Id: I5702c7d6130daf95776f2c15d24e5d253691cefd
Reviewed-on: http://review.coreboot.org/2319
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Exynos system clock can be initialized before RAM init, not necessary to be in
the very beginning (boot block). This helps reducing bootblock dependency.
Verified to boot on armv7/snow.
Change-Id: Ic863e222871a157ba4279a673775b1e18c6eac0d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2308
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The prototypes that were recently defined only work for the
internal implementations.
Change-Id: Ib34bb75a0b882533da550b9cd17cd777c2463e02
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/2318
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The power_init is not required on Exynos 5250 (snow) in bootblock stage. To get
a cleaner and faster bootblock, we can remove it.
Note, power_init internally calls max77686 and s3c24x0_i2c, so both files are
also removed.
Verified to boot on armv7/snow.
Change-Id: I5b15dfe5ac7bf4650565fea0afefc94a228ece29
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2317
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The I2C initialization (on component MAX77688) is already done in power_init, so
we should not need an explicit call inside bootblock.
Verified to boot on armv7/snow.
Change-Id: I68c248a8b5fee4ab838b2fb708649e112559cc41
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2316
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Remove duplicated / testing code and share more driver for bootblock, romstage
and ramstage.
The __PRE_RAM__ is now also defined in bootblock build stage, since bootblock is
executed before RAM is initialized.
Change-Id: I4f5469b1545631eee1cf9f2f5df93cbe3a58268b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2282
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
For x86, the old CBFS search behavior was to bypass bootblock and we should keep
that. This will speed up searching if a file does not exist in CBFS.
For arm, the size in header is correct now so we can remove the hack by
CONFIG_ROM_SIZE.
Change-Id: I541961bc4dd083a583f8a80b69e293694fb055ef
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2292
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
"SPL" from U-Boot is deprecated by bootblock in coreboot/arm, so we don't need
it anymore.
Change-Id: Id16877075d0b870839a10160073ad70777a2af0a
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2297
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This attempts to clean out some dead code which was copy + pasted
into Snow's bootblock.c file, along with some unnecessary headers.
Change-Id: If9f157a52395a047c249a2a6385e0e8ddf310e59
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2291
Tested-by: build bot (Jenkins)
hang() is the legacy function from U-boot and should be replaced by hlt() in
coreboot.
Change-Id: I0f390b1b6f9ff71487ea36cf16c462724b66d8ca
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2298
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Added casts and a couple of #ifdefs to fix the warnings in the
vendorcode/amd/agesa/f14 codebase. This will allow us to re-enable
'all warnings being treated as errors' in boards such as Persimmon
that are using this code. That change will follow.
These are the warnings that are fixed by this patch:
src/vendorcode/amd/agesa/f14/Legacy/Proc/hobTransfer.c: In function 'CopyHeapToTempRamAtPost':
src/vendorcode/amd/agesa/f14/Legacy/Proc/hobTransfer.c:219:28: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f14/Legacy/Proc/hobTransfer.c: In function 'CopyHeapToMainRamAtPost':
src/vendorcode/amd/agesa/f14/Legacy/Proc/hobTransfer.c:372:30: warning: comparison between pointer and integer [enabled by default]
src/vendorcode/amd/agesa/f14/Legacy/Proc/hobTransfer.c:381:33: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/cpuApicUtilities.c: In function 'ApUtilSetupIdtForHlt':
src/vendorcode/amd/agesa/f14/Proc/CPU/cpuApicUtilities.c:863:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/cpuApicUtilities.c:872:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/cpuMicrocodePatch.c: In function 'LoadMicrocode':
src/vendorcode/amd/agesa/f14/Proc/CPU/cpuMicrocodePatch.c:211:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c: In function 'HeapManagerInit':
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:167:52: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:183:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c: In function 'HeapGetBaseAddress':
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:669:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:676:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:683:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:684:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:687:23: warning: assignment makes integer from pointer without a cast [enabled by default]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:691:21: warning: assignment makes integer from pointer without a cast [enabled by default]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:696:3: warning: return makes pointer from integer without a cast [enabled by default]
In file included from src/mainboard/amd/persimmon/agesawrapper.h:30:0,
from src/northbridge/amd/agesa/family14/northbridge.c:36:
src/vendorcode/amd/agesa/f14/AGESA.h:1132:0: warning: "TOP_MEM" redefined [enabled by default]
In file included from src/northbridge/amd/agesa/family14/northbridge.c:34:0:
src/include/cpu/amd/mtrr.h:31:0: note: this is the location of the previous definition
In file included from src/mainboard/amd/persimmon/agesawrapper.h:30:0,
from src/northbridge/amd/agesa/family14/northbridge.c:36:
src/vendorcode/amd/agesa/f14/AGESA.h:1133:0: warning: "TOP_MEM2" redefined [enabled by default]
In file included from src/northbridge/amd/agesa/family14/northbridge.c:34:0:
src/include/cpu/amd/mtrr.h:34:0: note: this is the location of the previous definition
Verified on persimmon.
Change-Id: I1671b191c72dfc1d63ada41126ae3418bc8f86ae
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/2293
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Steven Sherk <steven.sherk@se-eng.com>
In case that the new toolchains don't work well, we can trace back
and reproduce the old tools by checking the xgcc folder. It is useful
when my team members need to get my old toolchains on their own host
machines.
Change-Id: I54e4bc6afcfbbf622165af6eae27bbb6efc2e8cc
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2247
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The common part of the bootblock resets the nvram data if it's found
to be invalid. Since that code is compiled with romcc in i386 mode,
there's a shortage on registers.
Try to reduce the strain by doing things smarter: cmos_write_inner
is the same as cmos_write, just that it doesn't check if the RTC is
disabled. Since we just disabled it before, we can assume that it is so.
Change-Id: Ic85eb2a5df949d1c1aff654bc1b40d6f2ff71756
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2296
Tested-by: build bot (Jenkins)
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
For arm/snow, current bootblock is larger than previously assigned CBFS offset
and will fail to boot. To prevent this happening again in future, cbfstool now
checks if CBFS will overlap bootblock.
A sample error message:
E: Bootblock (0x0+0x71d4) overlap CBFS data (0x5000)
E: Failed to create build/coreboot.pre1.tmp.
arm/snow offset is also enlarged and moved to Kconfig variable.
Change-Id: I4556aef27ff716556040312ae8ccb78078abc82d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2295
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Some variables are using incorrect data type in debug messages.
Also corrects a typo (extra 'x').
Change-Id: Ia3014ea018f8c1e4733c54a7d9ee196d0437cfbb
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2294
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This patch moves ARM core and DRAM timing functions around to simplify
the dependencies for system_clock_init().
The original code was architected such that the system_clock_init()
function called other functions to obtain core and memory timings.
Due to the way memory timing information must be obtained on Snow,
which entails decoding platform-specific board straps, the bottom-
up approach resulted in having the low-level clock init code
implicitly depend on board and vendor-specific info:
main()
->system_clock_init()
-> get_arm_ratios()
-> CPU-specific code
-> clock_get_mem_timings()
-> board_get_revision()
-> read GPIOs (3-state logic)
-> Decode GPIOs in a vendor-specific manner
-> Choose memory timings from module-specific look-up table
...then proceed to init clocks
...come back to main()
The new approach gathers all board and vendor-specific info in a
more appropriate location and passes it into system_clock_init():
main()
-> get_arm_ratios()
-> CPU-specific code
-> get_mem_timings()
-> board_get_config()
-> read GPIOs (3-state logic)
-> Decode GPIOs in a vendor-specific manner
-> Choose memory timings from module-specific look-up table
-> system_clock_init()
...back to main()
Change-Id: Ie237ebff76fc2d8a4d2f4577a226ac3909e4d4e8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2271
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This gets rid of a bunch of duplicate I2C code in the bootblock.
Change-Id: I51f625a0f738cca4ed2453fbcb78092e4110bc7e
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2289
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This gets rid of a bunch of copy + pasted GPIO code.
Change-Id: I548b2b5d63642a9da185eb7b34f80cbebf9b124f
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2288
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Move the ID section again due to bootblock bloat. So long
as it's within the first 32K of our address space, we're good.
TODO:
1. Place ID section near start of ROM to avoid this issue.
2. Reduce bootblock bloat.
3. Make bootblock debugging a Kconfig option.
Change-Id: I3f0764a3345a8cbbafcc15e4d06c38cd6327758c
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2287
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Right now cbfstool only accepts firmware volumes with
a x86 SEC core and refuses an x86-64 SEC core because
some magic values and the extended PE header are
different. With this patch, both IA32/x64 images are
supported. (No check is done whether the mainboard
actually supports 64bit CPUs, so careful!)
This needs another patch to Tiano Core that switches
to long mode after jumping to the 64bit entry point.
Right now that code assumes we're already in 64bit code
and the machine crashes.
Change-Id: I1e55f1ce1a31682f182f58a9c791ad69b2a1c536
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2283
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
We don't need a special Kconfig variable anymore
because the FV _is_ the payload, unlike with the
old tianocoreboot implementation.
Change-Id: I349b5a95783e4146e3ab7f926871188cf2021935
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2284
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
This gets rid of a bunch of copy + pasted code from Exynos UART
files.
Change-Id: I9fbb6d79a40a338c9fdecd495544ff207909fd37
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2286
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Some header content got duplicated during the initial porting
effort. This moves generic UART header stuff to exynos5-common
and leaves exynos5250 #defines in the AP-specific UART header.
Change-Id: Ifb6289d7b9dc26c76ae4dfcf511590b3885715a3
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2285
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This removes the hack implemented in http://review.coreboot.org/#/c/2280
(and should make using 64bit Tiano easier, but that's not yet supported)
Change-Id: Ie30129c4102dfbd41584177f39057b31f5a937fd
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2281
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
add-payload, add-stage, and add-flat-binary are now all using cbfs_image API.
To test:
cbfstool coreboot.rom add-stage -f FILE -n fallback/romstage -b 0xXXXX
cbfstool coreboot.rom add-payload -f FILE -n fallback/pyload
And compare with old cbfstool.
Verified to boot on ARM(snow) and X86(qemu-i386).
Change-Id: If65cb495c476ef6f9d90c778531f0c3caf178281
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2220
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The "add" command is compatible with all legacy usage. Also, to support
platforms without top-aligned address, all address-type params (-b, -H, -l) can
now be ROM offset (address < 0x8000000) or x86 top-aligned address (address >
0x80000000).
Example:
cbfstool coreboot.rom add -f config -n config -t raw -b 0x2000
cbfstool coreboot.rom add -f stage -n newstage -b 0xffffd1c0
Verified boot-able on both ARM(snow) and x86(QEMU) system.
Change-Id: I485e4e88b5e269494a4b138e0a83f793ffc5a084
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2216
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Usage Changes: To support platforms with different memory layout, "create" takes
two extra optional parameters:
"-b": base address (or offset) for bootblock. When omitted, put bootblock in
end of ROM (x86 style).
"-H": header offset. When omitted, put header right before bootblock,
and update a top-aligned virtual address reference in end of ROM.
Example: (can be found in ARM MAkefile):
cbfstool coreboot.rom create -m armv7 -s 4096K -B bootblock.bin \
-a 64 -b 0x0000 -H 0x2040 -o 0x5000
Verified to boot on ARM (Snow) and X86 (QEMU).
Change-Id: Ida2a9e32f9a459787b577db5e6581550d9d7017b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2214
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To support platforms without top-aligned address mapping like ARM, "locate"
command now outputs platform independent ROM offset by default. To retrieve x86
style top-aligned virtual address, add "-T".
To test:
cbfstool coreboot.rom locate -f stage -n stage -a 0x100000 -T
# Example output: 0xffffdc10
Change-Id: I474703c4197b36524b75407a91faab1194edc64d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2213
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Old cbfstool may produce CBFS image with calculation error in size of last empty
entry, and then corrupts master header data when you really use every bit in
last entry. This fix will correct free space size when you load ROM images with
cbfs_image_from_file.
Change-Id: I2ada319728ef69ab9296ae446c77d37e05d05fce
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2211
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To delete a component (file) from existing CBFS ROM image.
To test:
cbfstool coreboot.rom remove -n fallback/romstage
# and compare with old cbfstool output result.
Change-Id: If39ef9be0b34d8e3df77afb6c9f944e02f08bc4e
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2208
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change the "extract" command to use cbfs_export_entry API. Nothing changed in
its usage.
To verify, run "cbfstool coreboot.rom extract -f blah -n blah" and check if the
raw type file is correctly extracted.
Change-Id: I1ed280d47a2224a9d1213709f6b459b403ce5055
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2207
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Process CBFS ROM image by new cbfs_image API.
To verify, run "cbfstool coreboot.rom print -v" and compare with old cbfstool.
Change-Id: I3a5a9ef176596d825e6cdba28a8ad732f69f5600
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2206
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Current cbfstool implementation is relying on global variables to pass processed
data, and the calculation of address is based on x86 architecture (ex, always
assuming 0x0000 as invalid address), not easy to be used on platforms without
top-aligned memory mapping. This CL is a first step to start a new cbfstool
without global variables, and to prevent assuming memory layout in x86 mode.
The first published APIs are for reading and writing existing CBFS ROM image
files (and to find file entries in a ROM file).
Read cbfs_image.h for detail usage of each API function.
Change-Id: I28c737c8f290e51332119188248ac9e28042024c
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2194
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Many functions in cbfstool need to deal with a memory buffer - both location and
size. Right now it's made by different ways: for ROM image using global variable
(romsize, master_header); and in cbfs-* using return value for size and char**
to return memory location.
This may cause bugs like assuming incorrect return types, ex:
uint32_t file_size = parse(); // which returns "-1" on error
if (file_size <= 0) { ...
And the parse error will never be caught.
We can simplify this by introducing a buffer API, to change
unsigned int do_something(char *input, size_t len, char **output, ...)
into
int do_something(struct buffer *input, struct buffer *output, ...)
The buffer API will be used by further commits.
Change-Id: Iaddaeb109f08be6be84c6728d72c6a043b0e7a9f
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2205
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is a port of the following:
commit d5c998be99
The coreboot resource allocator doesn't respect resources
claimed in the APIC_CLUSTER. Move the MMCONF resource to the
PCI_DOMAIN to prevent overlap with PCI devices.
original-Change-Id: I8541795f69bbdd9041b390103fb901d37e07eeb9
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
URL - http://review.coreboot.org/#/c/2167/
Change-Id: I6e585d5cf0d46bd58337a6801fb0690ab2dd000c
Signed-off-by: Steven Sherk <steven.sherk@se-eng.com>
Reviewed-on: http://review.coreboot.org/2248
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
This unplugs Stefan's PIANO project.
Change Tianocore payload configuration to use corebootPkg.
As argument you have to give it the COREBOOT.FD generated by
the Tianocore build system.
It automatically determines base address and entry point.
Compression setting is honored (ie. no compression if you don't
want), but corebootPkg currently assumes that coreboot is doing
it. Loading a 6MB payload into CBFS without compression will fail
more often than not.
Change-Id: If9c64c9adb4a846a677c8af40f149ce697059ee6
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2280
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The following command was used to correct the grammatical mistake.
$ git grep -l 'This is the stub function will call' | xargs sed -i s,This is the stub function will call,This stub function will call, '{}'
sed: -e Ausdruck #1, Zeichen 6: Nicht beendeter `s'-Befehl
As this file seems to have been copied around a lot, it originally
seems to have come with the following commit for AMD Persimmon and
AMD Inagua.
commit 69da1b676c
Author: Frank Vibrans <frank.vibrans@amd.com>
Date: Mon Feb 14 19:04:45 2011 +0000
Add IBASE DB-FT1 and AMD Inagua motherboards. Patch 8 of 8.
Change-Id: I2e6630a5172738b01e6def7062284f167e5508b1
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2268
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
If somebody makes use of CONFIG_LOCALVERSION show this
user provided config string for DMI bios_version.
As requested I have attached example output.
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
...
root@OT:~# cat /sys/class/dmi/id/bios_version
4.0-3360-g5be6673-dirty
CONFIG_LOCALVERSION="V1.01.02 Beta"
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
...
root@OT:~# cat /sys/class/dmi/id/bios_version
V1.01.02 Beta
Change-Id: I5640b72b56887ddf85113efa9ff23df9d4c7eb86
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-on: http://review.coreboot.org/2279
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marcj303@gmail.com>
Update function messages to be more portable by using
the __func__ compiler command instead of hard coded
function names.
Change-Id: I3368a831770df1b8449eb0c97ae4bb24f6678efd
Signed-off-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/2250
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Update function messages to be more portable by using
the __func__ compiler command instead of hard coded
function names.
Change-Id: Ib8ab97666340a9481f3ab71f0f347382e964994f
Signed-off-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/2251
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Update function messages to be more portable by using
the __func__ compiler command instead of hard coded
function names.
Change-Id: Idf479980e427bbf0399bdbc15045d80f402f6dbe
Signed-off-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/2249
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Patrick Georgi