The board can be flashed without adding a diode by just leaving VCC
unconnected. Rework the flashing section to describes that.
Change-Id: I37d55ffdbcfba4f3a1113a82f16ec8766bbb6e6c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
- Drop vanished issue on PCIe warning
- Drop TODO section, since the TODOs are done
- Document the jumper J6, that was not documented by the vendor. Its
function has been determined by dissecting a dead board.
- The flash is not socketed anymore. Drop that note and compress the
whole paragraph. Also add a note about flashing via the BMC web
interface.
Change-Id: I2b5a08a6b6d80717621d6a30f31829fe4b84891a
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This adds another x11 series board, the X11SSM-F, which is similiar to
X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and
Ethernet interfaces.
Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Michael Niewöhner
Michael Niewöhner