This enables CACHE_MRC_SETTINGS by default as well selects
timer configuration.
Change-Id: I0248001892ef763c39097848b5adc8c1befed1f0
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14252
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
ACPI MCFG table is required for OS to support Enhanced
Configuration Space Access.Apollolake will only support
1 PCI Segment Group, so all the pci bus number from 0
to 0xff will belong to that group.
Change-Id: I3a680eb9c83290cd531159d7e796382a132cd283
Signed-off-by: Lance Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13375
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Implement flash read, write, and erase functionality using the
hardware sequencing capabilities of the SOC. Due to changes in
hardware requirements, the flash chip must be probed differently
than on previous platforms (details explained in comments).
Note that this is a minimal implementation, and does not provide all
the bells and whistles.
Change-Id: I6dcc3bc36dfce61927d126d231a16d485acb1bdc
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14246
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The delay_tsc.c code took different paths depending
__PRE_RAM__ being defined or not. Also, timer_monotonic_get()
was only compiled in a !__PRE_RAM__ environment. Clean up
the code paths by employing CAR_GLOBAL for the global state
which allows the same code to be used in all stages.
Lastly, handle apollolake fallout now that init_timer() is
not needed in placeholders.c.
Change-Id: Ia769fa71e2c9d8b11201a3896d117097f2cb7c56
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14301
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The default nvm_mmio_to_flash_offset() implementation used by NVM code
in intel/common does not work on apollolake. As a result, provide the
correct override.
Change-Id: I01a94f90dfdd33586a4aac5c05dd8c73e8804437
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14248
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On apollolake, the flash is memory-mapped differently, and the default
MMIO to flash calculation does not produce correct results. While the
long-term solution is to rewrite the NVM functionality to keep the
flash offset as part of its context, as a temporary measure, allow
overriding the to_flash_offset() function by declaring it weak.
Change-Id: Ic54baeba2441a08cfe1a47e235747797f6efb59b
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14247
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Instead of using arch_segment_loaded() implement
platform_segment_loaded() so as not to tangle the notion of
arch and the chipset. Lastly, add a TODO to allow filtering
of the L1D to L2 flush depending on the region loaded.
Change-Id: I52e7cd2ae6e2d95f21bdd2fe1a471a10565309cb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14215
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Instead of using platform_prog_run() for flushing programs
from L1D to L2 for code coherency purposes use arch_segment_loaded()
instead as that it's primary purpose. The arch_segment_loaded()
is called within the infrastructure at the appropriate places when
loading programs. Therefore use that to perform the L1D flush
instead of when something is just about to run.
Change-Id: Ib0a6be6f676dcf2c946ef5702471af65d89133e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14212
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The flush L1D to L2 operation was only being used when loading
romstage from bootblock. However, when the FSP-M component is
loaded no code coherency actions are taken. I suspect this is
because the FSP-M component is larger than the 24KiB L1D and
the entry point is early in the image. Thus, when loading
the FSP-M component the earlier part of the image is flushed
out to L2 in the process of loading the latter part of the
component. Also, once verstage is introduced the same
code coherency actions need to be taken as well. Therefore,
position the apollolake code to handle all these cases.
Change-Id: Ie71764f1b420a6072c4f149ad3e37278b6cb70e1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14210
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
This patch would enable PROCHOT feature in skylake. Asserting
PROCHOT line would throttle the GPU/CPU.
BUG=chrome-os-partner:51142
BRANCH=glados
TEST=manually tested on lars. asserting PROCTHOT by EC
reduces FSP in fish-tank from approx 40 to 20. (50 fish setting),
also CPU freq. drops to from 1600000 to 400000
Change-Id: I8fc0c015ea2c26d20bbbfc619f720f231d540feb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1b88b1f183df9c7362d7e58acb0a1fa0b076d56e
Original-Change-Id: Ida8636efc3d8da56ebd3931144d31ab1b88fe806
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331690
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-(cherry picked from commit d091a999c3827179182b62a1274a9b3581f7f006)
Original-Reviewed-on: https://chromium-review.googlesource.com/333073
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/14120
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
A call to i2c_read() for a non-existent address followed by an i2c_read()
to a valid address results in a false abort status for the 2nd call.
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000000 (I2C_ERR_ABORT)
Because the abort status register is cleared on read and wait_tx_fifo()
reads it twice, the returned status does not contain the abort status.
Fixing that changed the 2nd read to reflect the abort status.
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000001 (I2C_ERR_ABORT)
Bit 0 indicates that the address was not acknowledged by any slave.
That's the abort status from the previous transaction.
So I added a read of the abort status before starting a transaction in
both i2c_read() and i2c_write().
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0 (I2C_SUCCESS)
Tested on a Bay Trail E3845 SoC.
Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14160
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
i2c.c uses "*(volatile unsigned int *)" constructs where it could use
read32() and write32().
Switch to using read32() and write32().
The remaining instances in wait_tx_fifo() and wait_rx_fifo() are fixed
in https://review.coreboot.org/#/c/14160/
Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe
(intel/fsp_baytrail: Fix I2C abort logic)
I also fixed a few minor white space issues.
Change-Id: I587551272ac171ef1f42c7eb26daf877dc56646b
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14162
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The current Apollolake flow has its code executing out of
cache-as-ram for the pre-DRAM stages. This is different from
past platforms where they were just executing-in-place against
the memory-mapped SPI flash boot media. The implication is
that when cache-as-ram needs to be torn down one needs to be
executing out of DRAM since the act of cache-as-ram going
away means the code disappears out from under the processor.
Therefore load and use the postcar infrastructure to bootstrap
this process for tearing down cache-as-ram and subsequently
loading ramstage.
Change-Id: I856f4b992dd2609b95375767bfa4fe64a267d89e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14141
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Disable the ROM shadow and enable RAM for 0x000e0000 - 0x000fffff.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing successful display of 0x000ffff0 - 0x000fffff does not match
the end of the SPI flash.
Change-Id: I6e0a50417815320333eae0b69b96280c39db7eaa
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14110
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This change fixes LPSS ACPI mode. Previously, enabling ACPI mode would
result in unusable devices, as the resources were set to 0 and the devices
were disabled.
lpss.c was copied from intel/baytrail with a few minor adjustment for the
different config structure.
ACPI mode requires setting PcdLpssSioEnablePciMode==LPSS_PCI_MODE_DISABLE
and applying the patch that disables clearing gnvs.
https://review.coreboot.org/#/c/14040/
This doesn't handle the case where the FSP has PcdLpssSioEnablePciMode
set to disable and the devicetree set to default.
Change-Id: I12fffea3820ed948defe7a4f11af6b6363402560
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14042
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This change properly assigns resources to the LPE (Low Power Engine for
Audio) and enables ACPI mode.
lpe.c was copied from intel/baytrail with a few minor adjustment for the
different config structure.
ACPI mode requires setting LpeAcpiModeEnable=LPE_ACPI_MODE_ENABLED and
applying the patch that disables clearing gnvs.
https://review.coreboot.org/#/c/14040/
Change-Id: I3fff9aa158bde88e571082642d4f985a5ae1976e
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14041
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
That wipes out all previously stored settings and breaks running devices
in ACPI mode.
This more closely matches what is done in intel/baytrail.
Change-Id: Ie993c9f9e1eceb73d016d2df72770a27abb26ec1
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14040
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Skip logging a wake source when just resetting without coming from
S3 or S5 state. This will prevent the occasional spurious event
like PCI PME from showing up in the event log.
BUG=chrome-os-partner:40635
BRANCH=glados
TEST=run warm reboot teset on chell and ensure no wake source is logged
Change-Id: If739034dc9022b37c90b9cc849a00c604383e70f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7b5cc91adc3ed10df7cebd758cf8144216b9890
Original-Change-Id: I16f4f98df8c70fd25986a8b3644334c7209fd083
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329846
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331173
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13991
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In order to save more power by shutting down clocks add the
ability to optionally clock gate the 8254 programmable interrupt
timer. When doing this the platforms lose their "PC"-ness which
certain payloads and OSes rely on such as SeaBIOS.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=Enabled option on chell. Noted the bit is set upon booting.
Change-Id: I01f9d177bbde417d1efec2e16656a07dcebccbde
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 662575aa6a63656dedfa0ce1f202f5fac0205477
Original-Change-Id: Ib4a613cf1c28fc96c36fa2987c4b58a05beab178
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329411
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331171
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13985
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Adding an option to enable VR specific mailbox command.
When set, an extra VR mailbox command specifically for
the MPS IMPV8 VR will be sent.
BUG=chrome-os-partner:48511
BRANCH=None
TEST=Verified on glados, clean S0ix entry and exit.
IMVP8 power is also pretty low
Change-Id: Ia5a23cbb1eca8b463eb7c7c279b74635f1d6b9f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c90a799b51fe35bf184dca6ffce59c89a60f9917
Original-Change-Id: Iffd3fbcb9a15611eefc942529e6cdafba859fb2e
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329393
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13982
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of having to supply CAR memory region during compilation
time it is possible to determine it in runtime. FSP2.0 blobs carry
a copy of UPD structure pre-populated with 'default' values. The
default value for StackSize is actually the real value blob needs.
Change-Id: I298e07bb12470ce659f63846ab096189138e594f
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14001
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds most important MMIO reserved memory resources,
real DRAM memory resources, and some DRAM resources that
can not be used as RAM for whatever reason.
Change-Id: Id5a80cf18d67ace991e8046fa46c4b7ed47c626a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13360
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
UART bar gets overwritten during resource allocation stage. As result
the serial driver ends up using stale BAR so serial output does not
work. This driver simply tells resource allocator not to change BAR
of UART device.
Change-Id: I81f4f04089106c80bea97f0bbaba890df00c8ac5
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13997
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This is the minimal setup needed to get all CPU cores enabled. That
includes sending an IPI to APs and setting up MTRRs. Microcode updates
are not performed for two reasons:
* CSE (Converged Security Engine) upgrades the microcode before
releasing reset
* Microcode update files are not available at this point in time
Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13910
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
There's no need to use a struct resource type for
fsp_find_reserved_memory(). struct resource is mainly associated
with a device and that memory is added to cbmem after memory init.
Other uses ins FSP 2.0 just use struct range_entry. Use that
instead for consistency.
Change-Id: Id7d39da1c2e23f97cdaafd7f5d281cefa6fee543
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13960
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
The memory provided to MemoryInit() for its own usage is at the
top of the CAR region.
Change-Id: I8685b5ab138182e24123b14cac6f7b32e5e784d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13957
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
For all the chipsets which were performing the following sequence:
x86_setup_fixed_mtrrs();
x86_setup_var_mtrrs(cpuid_eax(0x80000008) & 0xff, 2);
Replace that with x86_setup_mtrrs_with_detect() since it is equivalent.
Change-Id: I9f362dbf38942d675f615d22b9e5770ce65e5a08
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13936
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Add a country identifier field to NVS and populate it with the
call to wifi_regulatory_domain() which will (by default) do a
lookup for the 'region' identifier in VPD on a Chrome OS device.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: Ie7531848e620095732772c22156a85b7f8a6df5c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: dafdb3760a0302e3effdc0e83977c1bfd5c9d3b2
Original-Change-Id: Ic83ab008045a469d0e0756f7e4d42f1b3894c529
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329295
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13839
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Set the UPD values for MemoryInit.
* Update the FspUpdVpd.h file which specifies the parameters for
MemoryInit.
* Add the necessary values to chip.h to enable values to come from
the mainboard's devicetree.cb file
* Add the parameters to the mainboard's devicetree.cb file
* Locate the platform configuration database file (pdat.bin)
* Copy the data values from the chip_info structure into the UPDs
* Display the UPD values
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_DISPLAY_UPD_DATA=y
* Testing successful when the UPD data is displayed before the call to
MemoryInit
Change-Id: Ic64f3d97eb43ea42d9b149769fc96bf78bf804f5
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13896
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
On Apollolake CPU memory mapping is similar to previous SoC, and
we place CBMEM right under TSEG.
Change-Id: I606f690449ba98af6e9fc3074d677c7287892164
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13883
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add the routines to handle the UPDs for SiliconInit. Currently no
support is required.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_DISPLAY_UPD_DATA=y
* Testing successful if coreboot calls SiliconInit
Change-Id: I5176ab4b1ea7681c3095f102a86f4b614366c0fc
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13897
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This romstage is minimalistic. Its goal is to set up some BARs
that FSP expects to be set and then invoke FSP driver to train
memory.
Change-Id: I3fa56aafe99cf6cf062a46dece3a0febeafdbfad
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13805
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On Apollo Lake SPI flash is memory mapped. The mapping is different
to previous platforms. Only "BIOS" region is mapped in contrast to
whole flash. Also, the 128 KiB right below 4 GiB are being decoded by
readonly SRAM. Fail accesses to those regions, rather than returning
false data.
Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13706
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The E3800 datasheet only lists 2K and 20K Pull Strength for the GPIOs.
The 10K and 40K values map to 'reserved'.
This brings the code closer to the non-FSP baytrail.
Change-Id: I77078bdbbccc00976525dc43fb98f5b2e79eae03
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13907
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Split out the MTRR support into a new module: mtrr.c.
TEST=Build and run on Galileo
Change-Id: Ib9ec479d171dbbc062509e14fbe246f6d90e903a
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13895
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Intel Speed Shift Technology is a new mechanism that replaces
Legacy P-state. ISST allows OS hints about energy/performance
preference. H/W performs the actual P-state control (autonomous)
1. Optimization frequency seclection for low residency workloads,
no longer a static knee point.
2. Optimized frequency selection for best energy to performance
trade offs.
3. Kick down frequency (from idle) fpr best responsiveness while
taking energy consumption init account.
Coreboot's responsiblity is to configure MSR 0x1AA ISST_EN bits
which will reflect in CPUID.06h:EAX[Bit 7] that driver checkes
and enable HWP accordingly.
BUG=chrome-os-partner:47517
BRANCH=None
TEST=Booted kunimitsu and verify HWP getting enabled/disabled
using Intel P-state driver.
Change-Id: I91722aa1077f4ef6c8620b103be3e29cfcd974e5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: aa7d004cb2e19047e4434e3e2544cf69393ce28f
Original-Change-Id: Ie617da337babde7f196a7af712263e37f7eed56f
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313107
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: https://review.coreboot.org/13835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The FBC hardware for skylake does not have access to the bios_reserved
range so it always assumes 8MB is used and so the kernel will
therefore need to avoid using the last 8MB of the stolen window.
With the default stolen size of 32MB(-8MB) there is not enough space
for FBC to work with a high resolution panel.
Kernel reference:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a9da512b3ed73045253afd778e40d4298f42905b
BUG=chrome-os-partner:50396
BRANCH=glados
TEST=build and boot on chell DVT
Change-Id: I3049d7d9e7c551aad5b8fd1630d5fbd88ccb2692
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: fff1f4b35e23e77cdc72c5bcc290f199494cdbbb
Original-Change-Id: If468cca5759a320f3cd2d7eb09f4bcc0117b24cb
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328813
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13833
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Initialize the base addresses for:
* Power management control
* Power management status
* Reset
* Power management timer
* General-Purpose Event 0
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_PAYLOAD_ELF=y
* CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"
* Testing successful when:
* Register address are properly displayed by the payload
* "reset -c" performs a reset and reboots the system
* "reset -w" performs a reset and reboots the system
* "reset -s" performs a reset and turns off the power
Change-Id: I9d043f4906a067b2477650140210cfae4a7f8b79
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13764
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Provide a bootblock_soc_early_init() to that takes care of
initializing the UART on behalf of the mainboard when serial
console is enabled.
Change-Id: I2d3875110b6f58a9e0b4c113084b85817aa05a87
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13793
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Instead of pushing the same code into each mainboard for configuring the
the UART pads and initializing the host contoller provide a function
to perform all the actions on behalf of the mainboard. The set of pads
configured is dictated by the CONFIG_UART_FOR_CONSOLE Kconfig option.
Change-Id: I06c499c7ee056b970468e0386d4bb1bc26537247
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13792
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
GPIO_187 is the beginning of the Northwest community pads.
Change-Id: I5565ecf534530144e80c65d886db11b53f38f935
Signed-off-by Aaron Durbin <adurbin@chormium.org>
Reviewed-on: https://review.coreboot.org/13789
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add SOC_UART_DEBUG which does all the appropriate selection of the
dependent Kconfig options for seral console. Also provide a default
option of it being turned off instead of always selected.
Change-Id: I1a6dba9c0072a17859c8f389709afe6fe3b04fac
Signed-off-by: Aaron Durbin <adurbin@chormium.org>
Reviewed-on: https://review.coreboot.org/13790
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
On some devices it can happen that DisplayPort TX lanes
do not work properly if the power gate setup is omitted.
If that happens, DisplayPort training will fail and therefore
DisplayPort channel will not work. Both ports are affected.
It seems that not every CPU shows this effect
and those that are affected tend to fail more often in a cold
environment.
With this fix a board that originally shows this failure
was running for over 1000 power cycles without issues.
Change-Id: Ia266674490a1bee63a85b38d1dc949dcdf683cbc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13743
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add all needed functions to fsp_baytrail so that reg_script can
do full iosf access. To keep it simple, this patch synchronises
iosf access between baytrail and fsp_baytrail.
Change-Id: Ic7f52d7d90c0fe3560fa5a5d96f7fc15062d66d1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13742
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use single ID value for HSUART1.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing successful if:
* Debug serial output stays enabled after BS_DEV_RESOURCES state
Change-Id: I38eca247f151e67c2b243a8a3bb21d9d1f4603de
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13734
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Enable HSUART1 for debug serial output. Specify the fixed resources in
the UART driver. This keeps debug serial output flowing during the rest
of the device initialization.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing successful if:
* Debug serial output stays enabled after BS_DEV_RESOURCES state
Change-Id: Ica02e5fece156b21d4a3889284ca467d55c7880d
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13730
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add ramstage.h to define some of the common header files used by the
drivers in ramstage.
Add northcluster.c, the driver for the memory controller, which defines
the memory map.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing successful if:
* Memory map successfully displayed in BS_WRITE_TABLES state
Change-Id: I8dc91119eaad0b7abc2e484d13ee708ba1253438
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13721
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add the chip and domain support which enables the display of the vendor
and device IDs for the PCI devices.
Testing on Galileo:
* Edit src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* The PCI vendor and device IDs are displayed.
Change-Id: I517dcafd83c7dd850bc3471f939d6804a05020c3
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13719
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Once bootblock copied romstage into CAR it may not jump into it right
away. This is because we are in NEM mode, there is no backing store
and a miss in L1 may cause L1D line snoop that gets written back. The
solution is to flush L1D to L2 so snoop guaranteed to hit L2.
Change-Id: I2ffe46dbfdfe7f0ccd38b34ff203ff76b6d5755b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13703
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Once we lock down the SPI BAR we need to tell SMM to re-init its
SPI driver or it will be unable to write ELOG events via SMI.
This SMI is also sent at the end of depthcharge so there was just
a window where SMI events could get lost.
BUG=chrome-os-partner:50076
BRANCH=glados
TEST=enable DEBUG_SMI, boot to dev screen, press power button and
see elog events get added without without transaction errors.
Change-Id: I1f14717b5e7f29c158dde8fd308bdbfb67eba41a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 60ca24c760c70e2ebe5f3e68f95d3ffdba0fef9e
Original-Change-Id: I4e323249f00954e290a6a30f515e34632681bfdd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/326861
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13697
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The PCH does not set PM1_STS[WAK_STS] bit when waking from a
G3 state, which is triggered by hibernate now on chell when we
do a PMIC shutdown. This means the checks for S5 wake are not
done and instead it is logged as a wake from S0.
BUG=chrome-os-partner:50076
BRANCH=glados
TEST=pass firmware_EventLog test on chell
Change-Id: I3ca05a4824df3401150a63d4b6555f759de40087
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: de6c9bac447edd06568193f990f1f4e278576783
Original-Change-Id: I4472498468d620fe69f2b68710e818a4ad287382
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/326888
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13696
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This change will allow the kernel to use 4-lane eDP connections
if the GOP driver does not execute and set this bit. If GOP
has executed (everyone but Chrome OS verified mode) the link will
already be up and this will do nothing.
BUG=chrome-os-partner:50197
BRANCH=glados
TEST=boot on chell and ensure 4
Change-Id: I9e2328b00db84f26b9bd03220b8ac0bd5f64cfbf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cff83e18ce9936c8d507f93c8443b7056c62e844
Original-Change-Id: I3f1e5d78b91eb0e4a23fcc196aff0edadc252a0c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/327251
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13690
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This method creates a named object and should be serialized to avoid
a compiler warning from recent iasl releases.
BUG=chrome-os-partner:40635
BRANCH=glados
TEST=emerge-chell coreboot with no iasl warnings
Change-Id: If54df4eca8849a8d278816712164b30a775a41ca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9aa8c5627276be08bf0dc3d0f4b9b7bd3f40c227
Original-Change-Id: Ieb05525503bf61c9922677484aba5479856a3f35
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/326843
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13689
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Ensure the pads passed into the gpio functions are within
range.
Change-Id: Ic523cbfaf60a46709080347af3a36d6330f9a07c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13694
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
To allow sharing macros in ASL as well as C the macros can't
have complex expression because the ASL compiler does not
evaluate those expressions. To that end, just pre-calculate
the values. Lastly, add N_OFFSET and utilize it for symmetry.
Change-Id: I546d71008e776b27ce8bcd24d2cbd2ee1b2d8020
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13693
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The CSE places the bootblock (IBBL in Intel parlance) below 4GiB
at top of the address space. However, it's size is limited to
32KiB. For now, just limit all of bootblock to 32KiB.
Change-Id: I8f84138fb81027eae1712b7af3943942c35cf0ea
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13692
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This patch generalizes the approach previously used for ARM32
TTB_SUBTABLES to "auto-detect" whether a certain region was defined in
memlayout.ld. This allows us to get rid of the explicit Kconfig for the
TIMESTAMP region, reducing configuration redundancy and avoiding
confusion when setting up future boards.
(Removing armv4/bootblock_simple.c because it references this Kconfig
and it is a dead file that I just forgot to remove in CL:12076.)
BRANCH=None
BUG=None
TEST=Booted Oak and confirmed that all pre-RAM timestamps are still
there. Built Nyan and Falco.
Change-Id: I557a4b263018511d17baa4177963130a97ea310a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13652
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It is silly to have a single header to declare the main()
symbol, however some of the arches provided it while
lib/bootblock.c relied on the arch headers to declare it. Just
move the declaration into its own header file and utilize it.
Change-Id: I743b4c286956ae047c17fe46241b699feca73628
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13681
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Early UART driver is for bootblock and romstage. It is supposed to be used
when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits
in bootblock requiered for serial to be set up.
Change-Id: I15520d566f107797e68d618885d4379e73d0fa45
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13677
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is the minimum setup needed to both get cache-as-ram setup and a
C environment working. On apollolake, we only get 32 KiB of data
loaded into an SRAM that is readonly to the main CPU. Due to this
restriction we have to set CAR and a C environment very early on.
Change-Id: I65c51f972580609d2c1f03dfe2a86bc5d45d1e46
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13301
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
We want the question for CBFS size to be next to the rom size in the
mainboard directory, but that doesn't seem to work for how people
want to set the defaults. Instead of having the list of exceptions
to the size, just set the defaults at the end of kconfig.
- Move the defaults for chipsets not setting HAVE_INTEL_FIRMWARE into
the chipset Kconfigs (gm45, nehalem, sandybridge, x4x)
- Override the default for HAVE_INTEL_FIRMWARE on skylake.
- Move the HAVE_INTEL_FIRMWARE default setting into the firmware
Kconfig file
- Move the location of the default CBFS_SIZE=ROM_SIZE to the end of
the top level kconfig file, while leaving the question where it is.
Test=rebuild Kconfig files before and after the change, verify that
they are how they were intended to be.
Note: the Skylake boards actually changed value, because they were
picking up the 0x100000 from HAVE_INTEL_FIRMWARE instead of the
0x200000 desired. This was due to the SOC_INTEL_SKYLAKE being after
the HAVE_INTEL_FIRMWARE default. Affected boards were:
Google chell, glados, & lars and Intel kunimitsu.
Change-Id: I2963a7a7eab037955558d401f5573533674a664f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13645
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Decode the CPU variants and display the CPU info.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Successful if Quark X1000 is displayed
Change-Id: I7234a6d81a48cdd02708b80663147e2b09ba979e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13605
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Optionally relocate FSP into DRAM and then call FSP SiliconInit.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select DISPLAY_FSP_ENTRY_POINTS"
* Add "select DISPLAY_HOBS"
* Optionally add "select RELOCATE_FSP_INTO_DRAM"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* FSP entry points are displayed and
* The message "FspSiliconInit returned 0x00000000" is displayed and
* The HOBs are displayed correctly and
* The message "ERROR - Missing one or more required FSP HOBs!" is
not displayed
Change-Id: I91e660ea373a8bb00fc97fe8b760347cbfa96b1e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13631
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add the SoC specific routines to access the MTRR registers. These
registers exist in the host bridge and are not accessible via the
rdmsr/wrmsr instructions.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select DISPLAY_MTRRS"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* The message "FSP TempRamInit successful" is displayed
Change-Id: I7c124145429ae1d1365a6222a68853edbef4ff69
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13530
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Baytrail FSP MR 005 adds two new fields:
AutoSelfRefreshEnable
APTaskTimeoutCnt
Add the device tree definitions.
Change-Id: I12e2a8b0b5cbeb6b7289cf91f65b25e73007a8de
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12973
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
Add a dummy fill_power_state routine so that execution is able to reach
FSP MemoryInit.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select DISPLAY_HOBS"
* Add "select DISPLAY_UPD_DATA"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* MemoryInit returns 0 (success) and
* The the message "ERROR - Coreboot's requirements not met by FSP
binary!" is not displayed
Change-Id: I2a116e1e769ac09915638aa9e5d7c58a4aac3cce
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13447
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Unused PINS will be controlled by GPIO controller (PMODE = GPIO) and
GPIO TX/RX will be disabled.
BUG=none
BRANCH=none
TEST=Build and boot lars
Change-Id: I3a6fcd2f3462e8e0d1273aa80b1599b76b160825
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 889bfd66dbc918e9fb0ba1b95b63fd7a3bf180d9
Original-Change-Id: I3bf4aa8599255e5382d99810b4c83b4c97c648b6
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319964
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/13628
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add the code to enable debug serial output using HSUART1:
* Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1
* Note that the BIST value is always zero as validated in
esram_init.inc
* The initial TSC value is currently not saved!
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if serial output is present on HSUART1 at
115200 baud, 8-bit, no parity
Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13445
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
This patch added nhlt_soc_serialize_oem_overrides and
nhlt_serilalize_oem_overrides to be able to override oem_id and
oem_table_id.board file can pass specific string by calling
nhlt_soc_serialize_oem_overrides
kernel use these two fields to construct a topology binary name
if the designate file is not found a default dfw_sst.bin will be used
it is optional.
BUG=chrome-os-partner:49570
BRANCH=glados
TEST=Build & Booted kunimitsu board. Verified that kernel
can read new strings.
Change-Id: I00b64fb8bb63de601d3116e0b8941057c1efa230
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 374ce08b2d8a2f4e5dd7f51eacb505dbb77fd171
Original-Change-Id: I03623c8ac81efb5a5ea3ec9c6cd604d2e9294022
Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/322860
Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com>
Original-Tested-by: Yang Fang <yang.a.fang@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13602
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The VBNV region size is determined by vboot and is not really
configurable. Only the CMOS implementation defined this config
variable so switch it to use VBNV_BLOCK_SIZE defined by vboot
in vbnv_layout.h instead.
This requires updating the broadwell/skylake cmos reset functions
to use the right constant.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell
Change-Id: I45e3efc2a22efcb1470bbbefbdae4eda33fc6c96
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e2b803ff3ac30ab22d65d1e62aca623730999a1d
Original-Change-Id: I4896a1a5b7889d77ad00c4c8f285d184c4218e17
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324520
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13598
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Successfully invoke TempRamInit from the FSP binary:
* Don't relocate the FSP binary image
* Copy the FSP binary into ESRAM
* Specify Kconfig values to easily debug ESRAM and TempRamInit code
* Specify the FSP binary file location
* Specify the FSP binary image ID
* Specify where in the flash image the FSP image must reside
* Specify the FSP data file location
* Specify where to place the FSP data file in the flash image
* Specify where in the ESRAM the FSP image must reside
Test 1 on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select ENABLE_DEBUG_LED_FINDFSP"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if the SD LED is on indicating that the FSP.bin
file was properly located, The test fails if the SD LED is flashing.
Test 2 on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Remove "select ENABLE_DEBUG_LED_FINDFSP"
* Add "select ENABLE_DEBUG_LED_TEMPRAMINIT"
* Testing is successful if the SD LED is on indicating that the FSP.bin
file was properly located, The test fails if the SD LED is flashing.
Change-Id: I1e2e413a8573f750c611b0f9df101b2c869a789e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13443
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The Quark SoC uses ESRAM instead of cache-as-RAM. This code requires
that utils/xcompile/xcompile change the machine architecture from i686
to i586 to ensure that the Quark does not attempt to execute unsupported
instructions:
* Adjust Makefile.inc to add the RMU to the coreboot image
* Add code to enable the ESRAM
Directly use the QuarkSocPkg/QuarkNorthCluster/Include/QuarkNcSocId.h
file from the EDK2 tree (https://github.com/tianocore/edk2.git) to
enable
easy differences and correct issues in coreboot that were found in EDK2.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_RMU_FILE"
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Remove power from the board
* Apply power to the board
* Testing is successful if the SD LED is on indicating that the end of
esram_init.inc was reached
Change-Id: I91d919da144bb72a5d4c4a8050ffab256632a395
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13440
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Keeping ACPI PM timer alive prevents XTAL OSC shutdown in S0ix
which has a power impact.
Based on a DT variable, this patch disables the ACPI PM timer
late in the boot sequence - disabling earlier will lead to a hang
since the FSP boot flow needs this timer. This also hides the ACPI PM
timer from the OS by removing from FADT table. Once the ACPI PM timer
is disabled, TCO gets switched off as well.
BRANCH=none
BUG=chrome-os-partner:48646
TEST=Build for skylake board with the PmTimerDisabled policy in
devicetree set to 1.
iotools mmio_read32 0xfe0000fc should return 0x2.
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
should list only "tsc hpet". acpi_pm should be removed from this list.
Change-Id: Icfdc51bc33b5190a55196d67e18afdaaa2f9b310
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 18bcb8a434b029295e1f1cc925e2b47e79254583
Original-Change-Id: Ifebe8bb5a7978339e07e4e12e174b9b978135467
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319361
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13588
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The setting of the SPI controller BAR was conditional
on the nominal frequency being set. Therefore, that doesn't
mean the SPI BAR is set on all boots. Move the setting of
the BAR in the southbridge_bootblock_init() which is called
prioer to cpu_bootblock_init().
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Confirmed spibar is always set on glados.
Change-Id: Ia58447d70f5e39a4336d4d08593f143332de833a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 56fff7c25c2eb0ccd90e08f71c064b83c66640f8
Original-Change-Id: I1e0cff783f4b072b80589a3a84703a262b86be3a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/319461
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13587
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to not reboot loop in the face of failed vboot verification
on resume set the PM1 control register to indicate S5. After the
subsequent cold reset the PM1 control register will indicate S5
as it should.
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=On chell injected failed vboot verification. Ensured a reboot
loop doesn't ensue.
Change-Id: Ie5e9e3f6441a217a5e02b4d78aaf21f8249b8a43
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a63b57d7bc59bcaf5518f7cc4afccd3d5da6df1c
Original-Change-Id: I5e467854bf065a138bd46e476a7e7088f51454ca
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323504
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13579
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To allow skylake platforms to run with verified memory init
code the chipset needs to implement vboot_platform_is_resuming()
so that the vboot code can make proper decisions.
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=Suspended and resumed on chell. Also, tested with an EC build
which returns a bad hash to ensure that is properly caught.
Change-Id: I508a339c07dcc9e7c56a0df4201660827b3ae07a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a3e11789339bcd8fc8fc99b704c6a1110acf5302
Original-Change-Id: I40264019eb28e85795258112c720056a6a3fc523
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323503
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13578
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Display ME firmware status before os boot. Specifically this
patch reads out the ME hfsts1 and hfsts2 status registers that provide
information about overall ME health before device gets disabled.
This change reused most of the code from bdw me_status implementation.
BUG=chrome-os-partner:47384
BRANCH=glados
TEST=Builds and Boots on FAB4 SKU2/3. Can observe me status table
Change-Id: Ia511c4f336d33a6f3b49a344bfbaea6ed227ffeb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a9d0fb411c3921654f0fdcea2a3d4ee601987af2
Original-Change-Id: Ied7e2dcd9a1298a38dfe1eda9296b9ca8eccf6b1
Original-Credits-to: Duncan Laurie <dlaurie@chromium.org>
Original-Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/323260
Original-Commit-Ready: dhaval v sharma <dhaval.v.sharma@intel.com>
Original-Tested-by: dhaval v sharma <dhaval.v.sharma@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13573
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The registers associated with the MTRRs for Quark are referenced through
a port on the host bridge. Support the standard configurations by
providing a weak routines which just do a rdmsr/wrmsr.
Testing:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select DISPLAY_MTRRS"
* Add "select HAVE_FSP_PDAT_FILE"
* Add "select HAVE_FSP_RAW_BIN"
* Add "select HAVE_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* The MTRRs are displayed and
* The message "FspTempRamExit returned successfully" is displayed
TEST=Build and run on Galileo
Change-Id: If2fea66d4b054be4555f5f172ea5945620648325
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13529
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
This is the very very minimum needed to compile the code.
Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/13297
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
TEST=Boot to OS
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: I9b43eb4f6f7af62a8a0bbe7bfa08feee1eaca24e
Reviewed-on: https://review.coreboot.org/13506
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Some trivial cleanup.
Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now coreboot should do BIOS CAR setup along with NEM
mode setup.
This patch also provides a mechanism to use 16MB code caching
benefit although LLC still limited to 1M/1.5M based
on SOC LLC limit.
Here with unlimited cache line gets replaced. Now we could use
unlimited cache size along with well defined data size
[pg: updated to current upstream #defines]
BUG=chrome-os-partner:48412
BRANCH=glados
TEST=Builds and Boots on FAB4 SKU2/3.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: pchandri <preetham.chandrian@intel.com>
Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com>
Change-Id: I96a9cf3a6e41cae9619c683dca28ad31dcaa2536
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2ec51f15c874ad2f1f4fad52fa8deced7b27a24b
Original-Change-Id: Id62c15799d98bc27b5e558adfa7c7b3468aa153a
Original-Reviewed-on: https://chromium-review.googlesource.com/320855
Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com>
Original-Tested-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13138
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add interface to program USB2_COMPBG register to set
HS_DISC_BG and HS_SQ reference voltage for each project.
TEST=Get build success and do EFT test
Original-Reviewed-on: https://chromium-review.googlesource.com/300846
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Original-Tested-by: shkim <sh_.kim@samsung.com>
Change-Id: If2201829e1a16b4f9916547f08c24e9291358325
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Signed-off-by: shkim <sh_.kim@samsung.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12739
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
DPTF should update the charger cooling device state during
boot time and every 3 seconds after boot. But 3 seconds polling
doesn't seems to be working with current version of DPTF.
This impacts charging since DPTF writes states 4 when charger
is not connected at boot time. On connecting the charger,
DPTF doesn't write 0 to enable charging. This issue is addressed
by calling the PPPC function to read cooling device state and passing
the value to SPPC to set cooling device state. This doesn't
compromise safety since DPTF can override this value
later based on the platform thermal condition. Also this provides
additional safety measure in the unlikely event that DPTF crashes
and is not re-spawned by OS. With this patch even after DPTF crashes,
if the power adapter is plugged it would still allow the system to
charge correctly.
Original-Reviewed-on: https://chromium-review.googlesource.com/288460
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Jenny Tc <jenny.tc@intel.com>
Change-Id: I50c7666b86e45d5ab537a9d4149e6c71eba04e50
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12729
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Andrey Petrov