pmc_set_acpi_mode() should run after Chrome EC dealt with all host event
bits, like SMI mask (otherwise the FAFT firmware_FWScreenCloseLid test
will fail).
BUG=b:153249055
TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage
Change the GBB flag to 0x140 then check SMI mask during depthcharge
phase, make sure it's 0x0000000000000001.
Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com>
Change-Id: Icfff5cc5550f23938343e4d26ef76093bb9cf7c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The previous Intel CPX-SP FSP release was ww20 release.
The ww22 release fixs issues related to FSP_NV_STORAGE HOB. The end of end
flow of using memory training data to generate FSP_NV_STORAGE HOB and
using memory training data passed from bootloader to skip memory
training, works now. This saves 8 minutes of boot time (with FSP verbose
logging enabled on DeltaLake server).
This release also adds UPD parameters to support IIO bifuration.
The ww24 release has following updates:
a. Removed a number of unnecessary UPD parameters, such as mmiolSize,
mmiolBase, OemHookPostTopologyDiscovery, OemGetResourceMapUpdate.
b. Added UPD parameters to support PCIe ports configuration.
c. Updated IIO_UNIVERSAL_DATA HOB, each stack now has mmio base/limit
fields, in addition to PCIe resource memory base/limit fields.
With ww24 release, the issue with PCIe link training persists. On YV3
config A, the onboard NIC card has x4 connection to port 2D. This
NIC device is not recognized by FSP.
Corresponding soc/intel/xeon_sp/cpx change is made:
* There are changes in PLATFORM_DATA structure, so hob_display.c
is updated.
* There are changes in UPD parameters, so romstage.c is updated.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I70762b377a057d0fca7806f485cce8d479fb5baa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41903
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix potential overflow when multiplying integers in transform_vector().
This issue is causing the absolute coordinate of the bottom right corner
of the box to be incorrectly calculated for draw_rounded_box(), which is
used in menu UI to clear the previous screen.
In addition, check the lower bound in within_box().
BRANCH=none
BUG=b:146399181, b:159772149
TEST=emerge-puff libpayload
TEST=Previous screen is cleared properly for menu UI
Change-Id: I57845f54e18e5bdbd0d774209ee9632cb860b0c2
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42770
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Future implementation of verstage running on PSP will have access
to some of the ACPIMMIO banks, but banks will be mapped runtime
at non-deterministic addresses. Provide preprocessor helpers to
accomplish this.
Change-Id: I8d50de60bb1ea1b3a521ab535a5637c4de8c3559
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Using proper symbols for base addresses, it is possible to
only define the symbols for base addresses implemented for
the specific platform and executing stage.
Change-Id: Ib8599ee93bfb1c2d6d9b4accfca1ebbefe758e09
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If VPD_SMBIOS_VERSION is selected, it would read VPD_RO variable that can
override SMBIOS type 0 version.
One special scenario of using this feature is to assign a BIOS version to
a coreboot image without the need to rebuild from source.
VPD_SMBIOS_VERSION default is n.
Tested=On OCP Delta Lake, dmidecode -t 0 can see the version being updated
from VPD.
Change-Id: Iee62ed900095001ffac225fc629b3f2f52045e30
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: insomniac <insomniac@slackware.it>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This enables to configure the Thermal Control Circuit (TCC) activation
value to new value as tcc_offset in degree Celcius. It prevents any
abrupt thermal shutdown while running heavy workload. This helps to
take early thermal throttling action before CPU temperature reaches
maximum operating temperature TjMax value. Also, cleanup local functions
from previous intel soc specific code base like for apollolake, broadwell,
skylake and cannonlake.
BUG=None
BRANCH=None
TEST=Built for volteer platform and verified the MSR value.
Change-Id: I37dd878902b080602d70c5c3c906820613ea14a5
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
These changes are in accordance with the documentation:
[*] page 208-209
Intel(R) 64 and IA-32 Architectures, Software Developer’s Manual,
Volume 4: Model-Specific Registers. May 2019.
Order Number: 335592-070US
Tested on OCP DeltaLake with change
https://review.coreboot.org/c/coreboot/+/40308/
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I87134b2e98c9b0c031be9375b75a2aa1284ae9bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Due to faffy has PL-2303 connect to USB2 port6(count from port0),
needs to enable it.
BUG=b:159760559
BRANCH=None
TEST=emerge-puff coreboot chromeos-bootimage
boot on puff board
Change-Id: Icc805757b043e7fac4d05188cbf2f9c9c56c2a2e
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
This also makes the calling of the eMMC GPIO mux setup function
conditional on PICASSO_LPC_IOMUX instead of AMD_LPC_DEBUG_CARD which
only makes the selection of PICASSO_LPC_IOMUX user-configurable.
Change-Id: Ic49a668f82fbc1b851c07d312b543d2889fe4734
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Both Dali and Pollock chips have less PCIe, USB3 and DisplayPort
connectivity. While Dali can either be fused-down PCO or RV2 silicon,
Pollock is always RV2 silicon.
Since we have all boards using this code in tree right now,
soc_is_dali() can be renamed and generalized to soc_is_reduced_io_sku().
Change-Id: I9eb57595da6f806305552128b0c077ceeb7c4661
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42833
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change allows mainboard to configure different wakeup routes that
can be used by a GPIO key:
1. SCI: This is selected when SCI route is used to wake the system. It
results in _PRW property being exposed in ACPI tables.
2. GPIO IRQ: This is selected when GPIO controller wake is used to
wake the system. It is typically used when the input signal is not
dual routed and the GPIO controller block is not capable of applying
filters for IRQ and wake separately. In this case, _PRW is not exposed
in ACPI tables for the key device.
3. Disabled: No wakeup supported.
Based on these wakeup routes, gpio_keys_add_child_node() is updated to
expose _PRW and _DSD properties for wakeup appropriately.
Additionally, the change updates mainboards that were already using
gpio_keys to set wakeup_route attribute correctly and renames "wake"
to "wake_gpe" to make the usage clear.
BUG=b:159942427
Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Also drop now-redundant definitions and include headers where needed.
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical.
Change-Id: I2fb46bb04d96df5e8261f49e0fd4d88eedca6084
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42659
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also drop now-redundant definitions and include headers where needed.
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical.
Change-Id: I3ddd133a4e81a7f6ce9c33ce227b40006a0d1850
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42658
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The three mainboards using this southbridge do not support it.
Change-Id: I006f1ec26c40f7e2dfc2ddedb017278455368bb9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42655
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change the order of the assignments to match that of i82801ix. This
changes the binary but the effective result should be the same.
Change-Id: Id720fce40e751295e629585d34017f10af2b5c7c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42651
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change the order of the assignments to match that of i82801ix. This
changes the binary but the effective result should be the same.
Change-Id: Ib190781f26f82f339eaf8039de459376ac0e3a5e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
At least i82801ix does this.
Change-Id: Ic555ab17c2eca0399938d2842ca51628899c1544
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42637
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested, it still boots. It is unknown whether this has any effect on
emulated hardware, which is most likely not emulating SPI transfers.
Change-Id: I44397c46dc0715697ca8680f418888804e4ea7e4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
All Intel southbridges with SPI perform this write. Put it inside a
function in common code. Use a different name to avoid a name clash.
As it is only one statement, make it inline so that it can be defined
on the header itself. It is only called once per southbridge anyway.
Change-Id: I3c284d6cffd22949d50b4c4f9846ceaef38d7cda
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This reverts commit 1408798637.
Reason for revert: Causing backlight issues in device. Will reland after more debugging to figure out the root cause.
BUG=b:159370566
BRANCH=None
TEST=boot up device and make sure when kernel is booted, backlight comes up.
Change-Id: I643854c6c805d262539bbb482808e8c322059a49
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This way make V=1 will tell you what it's actually doing.
Change-Id: I096bc2419e47a0b2a2454a792059464b27158cd9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42818
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jenkins is calling its build nodes "agent". Reflect that in
the path names we use in configuration.
Change-Id: I88a4d3d32a565ade768e3de6428f46d355bedfb2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42819
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
That option is only relevant if the boards selects HAVE_PIRQ_TABLE which
it doesn't.
Change-Id: Ib5839a42f5133f5f84e1e1e4e587801b916ca571
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Enable EIST option in the devicetree in order to make Windows aware of
using Intel CPU Turbo Technology.
Change-Id: Ied3d7e934fcab2d5d491573245d68d392df5ba34
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
William Wei