It's not needed, so we can remove some extra file mangling, too.
Change-Id: I80d707708e70c07a29653258b4cb6e9cd88d3de3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12508
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add the code necessary to create the linux trampoline blob.
Don't enforce this for the in-coreboot build or use objcopy
to produce linux_trampoline.o as it is a bit trickier to get
all the details right than I had hoped:
- you have to know the elf architecture of the host machine
- you might have to have more tools (xxd, perl, etc) installed
Change-Id: I9b7877c58d90f9fb21d16e0061a31e19fffa2470
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12505
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
The Linux trampoline code does not set up the segment descriptors for
__BOOT_CS and __BOOT_DS as described in the Linux kernel
documentation:
... a GDT must be loaded with the descriptors for selectors
__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G
flat segment; __BOOT_CS must have execute/read permission, and
__BOOT_DS must have read/write permission;
This is not a problem when launching a Linux payload from coreboot, as
coreboot configures the segment descriptors at selectors 0x10 and
0x18. Coreboot configures these selectors in the ramstage to match
what the Linux kernel expects (see
coreboot/src/arch/x86/lib/c_start.S).
When the cbfs payload is launched in other environments, SeaBIOS for
example, the segment descriptors are configured differently and the
cbfs Linux payload does not work.
If the cbfs Linux payload is to be used in multiple environments
should the trampoline needs to take care of the descriptors that Linux
requires.
This patch updates the Linux trampoline code to configure the 4G flat
descriptors that Linux expects. The configuration is borrowed from
the descriptor configs in coreboot/src/arch/x86/lib/c_start.S for
selectors 0x10 and 0x18.
The linux_trampoline code is slightly refractored by defining the
trampoline entry address, 0x40000, as TRAMPOLINE_ENTRY_LOC. This
definition is moved into a separate header file, linux_trampoline.h.
This header file is now included by both the trampoline assembly
language code and the trampoline loader C code.
The trampoline assembly language code can now use TRAMPOLINE_ENTRY_LOC
as scratch space for the sgdt CPU instruction.
Testing Done:
Verified the Linux payload is booted correctly in the following
environments:
1. Coreboot -> Linux Payload
2. Coreboot -> SeaBIOS -> Linux Payload: (previously did not work)
Change-Id: I888f74ff43073a6b7318f6713a8d4ecb804c0162
Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Reviewed-on: http://review.coreboot.org/6796
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Now that we can set CC to an arbitrary compiler, fix issues that clang
finds. Luckily, there were only two trivial errors.
Change-Id: I0fd1f0f263a8ab7004f39cd36ed42d1a1cba5c04
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5081
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In the great tradition of LinuxBIOS this allows adding
a kernel as payload. add-payload is extended to also
allow adding an initial ramdisk (-I filename) and a
command line (-C console=ttyS0).
Change-Id: Iaca499a98b0adf0134e78d6bf020b6531a626aaa
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3302
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Stefan Reinauer