Commit Graph

9 Commits

Author SHA1 Message Date
Patrick Georgi 6056b97fce Rework bootblock size handling:
- don't pretend to create a bootblock as large
  as the ROM in Kconfig (it's 64k at most)
- don't pretend to accept a bootblocksize value
  in cbfstool create (it ignored it)
- patch up the build systems to keep it working

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4934 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-11 21:32:23 +00:00
Patrick Georgi 0da38dde4b Add a "locate" function cbfstool, which helps you find
out a suitable address to put a XIP stage to.

Specifically, you pass it the file (to get its filesize), its filename
(as the header has a variable length that depends on it), and the
granularity requirement it has to fit in (for XIP).
The granularity is MTRR-style: when you request 0x10000, cbfstool looks
for a suitable place in a 64kb-aligned 64kb block.

cbfstool simply prints out a hex value which is the start address of a
suitably located free memory block. That value can then be used with
cbfs add-stage to store the file in the ROM image.

It's a two-step operation (instead of being merged into cbfs add-stage)
because the image must be linked twice: First, with some bogus, but safe
base address (eg. 0) to figure out the target address (based on file
size). Then a second time at the target address.

The work flow is:
 - link file
 - cbfstool locate
 - link file again
 - cbfstool add-stage.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4929 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-09 17:18:02 +00:00
Patrick Georgi 56f5fb734b Fix endless loop when trying to add a too large file to CBFS,
and report the correct error code, and a hopefully helpful
error message.


Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4692 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-30 11:21:18 +00:00
Stefan Reinauer 3fec29cc96 This separates the code for each command in cbfstool. For the good and for the
bad: It brings a certain amount of code duplication (some of which can be
cleaned up again, or get rid of by proper refactoring).
On the other hand now there's a very simple code flow for each command, rather
than for each operation. ie.

adding a file to a cbfs means:
 - open the cbfs
 - add the file
 - close the cbfs

rather than

open the cbfs:
 - do this for add, remove, but not for create

create a new lar
 - if we don't have an open one yet

add a file:
 - if we didn't bail out before

close the file:
 - if we didn't bail out before


The short term benefit is that this fixes a problem where cbfstool was trying
to add a file if you gave a non-existing command because it bailed out on
known, not on unknown commands.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4654 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-22 15:58:19 +00:00
Patrick Georgi 45d8a83b29 More error checking when trying to open files in
cbfstool. (trivial)

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4634 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-15 08:21:46 +00:00
Patrick Georgi b7b56dd8fb New cbfstool. Works without mmap or fork/exec and
supports fixed location files. Some parts are salvaged
from the pre-commit version (esp. stage and payload creation),
others are completely rewritten (eg. the main loop that handles
file addition)

Also adapt newconfig (we don't need cbfs/tools anymore) and fix
some minor issues in the cbfstool-README.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4630 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-14 13:29:27 +00:00
Myles Watson 475aeda9d6 Add -Werror to help us keep the code clean.
Change sizes from unsigned int to int.
Clean up some usage and parameter checking.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4262 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-08 19:39:15 +00:00
Myles Watson feaaedc1cf This patch adds
cbfstool extract [FILE] [NAME]

It also factors out the csize calculation in rom_add, and fixes rom_delete so
that it can handle deleting the last entry.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4144 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-20 21:38:11 +00:00
Peter Stuge 1d862ded11 v2/util: romfs -> cbfs rename
It's all sed here. romfs->cbfs, ROMFS->CBFS, romtool->cbfstool

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4110 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-14 00:08:34 +00:00
Renamed from util/romtool/romtool.c (Browse further)