Reverse rows and columns on the video putc() function, and watch printf
work again.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3316 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
typedef for time_t. The other half bumps the tint patch revision in buildrom
to take advantage of it.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3303 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add suport for walking LARs. These try to emulate the f*
functions from POSIX, though they are obviously different
in their behavior.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3288 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
the bottom of the screen - this turns the function keys into
categories and then list specific items as part of the category.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3285 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
this and re-commiting so that the history and comments are correct.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3284 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
rdtsc.h shouldn't be included unless we really need it (and use it).
Trivial.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3283 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add a gettimeofday() implementation - it works pretty well, but it
drifts a little bit so its not very suitable for keeping time. It
works best to track changes in time over small periods of time.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3272 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This was causing the returned counter value to be one more then it
should be when printing a single character.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3271 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The qemu keyboard controller defaults to using scancode set 2, we use set 1.
Turn on the translate mode in the keyboard controller to force the issue.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3270 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Apparently the previous version worked on luck. Fix the allocation
and add parens to better guide the compiler. Also, halt() if
the heap is poisoned (like by an overrun). Finally, fix calloc()
so that it actually works.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3269 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It displays the coreboot printk buffer in RAM and let's you scroll through it.
This feature is only available for coreboot v3 though, as v2 doesn't have a
printk-buffer feature, yet.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3247 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This solves the multiple keystroke issue that popped up recently.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3245 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
into the payloads/external/tint directory.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3239 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Use a simple one-liner for each of the functions. You can surely optimize
the code some more, but I chose not to do that in order to keep it readable.
When compiling with -Os the size differences are minimal.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3236 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
of functions while we're at it.
hex2bin() now also supports upper-case input characters.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3235 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Use _FOO_H include guard format everywhere.
- Add missing speaker.c prototypes to libpayload.h.
- Consistently use short form u8/u16/u32 instead of uint8_t et. al.
- kcofig: Use 'depends on' instead of 'depends', which seems deprecated.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3234 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add a Geode video driver in lieu of VGA on Geode LX devices
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3233 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
The Geode video driver will require a number of support functions,
including udelay(), PCI bus walking and MSRs. This adds those functions
in preparation for the actual code.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3231 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Add a framework for multiple video console drivers. This is to prepare
for the Geode driver.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3230 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Slight tweak to to the install target to avoid copying .svn
files. Trivial self ack.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3229 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
easily for other payloads. Also, add a 'distclean' target (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3227 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
libpayload uses a ton of flags and other scary gcc and ld options. These
wrappers hide most of that from the user, so that using libpayload is as
easy as lpgcc -o hello hello.c
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3226 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Properly set LINES and COLS, needed for a real curses application.
- Implement notimeout() and wtimeout(), which are trivial.
- Implement a dummy flushinp() for now as it's needed by a curses
application I'm porting, will be replaced by something useful later.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3224 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Implement a timeout option for getchar() to return after so many
milliseconds. Also implement the same thing for curses using
the halfdelay() function.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3223 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Following on the previous code to streamline the libpayload init code,
this removes the now unneeded stack structures.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3217 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Until now, the build would break, and even if it didn't the ELF would
triple-fault in QEMU.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3216 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
coreinfo features / modules will consume (trivial).
The measurements were done with libpayload r3213 (but compiled with -Os),
and coreinfo r3211 (also compiled with -Os).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3214 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
They're generally useful for lots of stuff, but especially for converting
to/from the compact 160 bit (20 byte) representation of SHA-1 hashes to
the "hex" representation (same as 'sha1sum' output), which is 40 bytes long.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3213 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
by not deleting build/config.h during 'make clean' (only in 'make distclean').
Also, change the default behaviour of 'make' from asking the user to
run 'make config' (or similar) to actually _run_ 'make config' without
asking questions. It's always possible to explicitly invoke
'make menuconfig' or 'make xconfig' and so on, of course.
Finally, make _all_ targets (allyesconfig, randconfig, and so on)
generate a build/config.h file, as we always #include it.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3211 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is also taken from the HelenOS project.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3210 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Let the linker figure out the correct address and just CALL the
start_main entry point.
Signed-off-by: Klaus Schnass <dev@stuffit.at>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3204 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
displaying the current date/time in the lower-right corner (optional).
Also, only build/use coreinfo modules which were selected in kconfig. This
makes coreinfo truly modular, and you can save quite a bit of ROM space
by disabling unwanted parts of coreinfo.
Finally, simplify the Makefile a bit by getting rid of MODULES (and only
using OBJECTS).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3203 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
upper 128 bytes of NVRAM (if enabled).
For most chipsets this means using I/O ports 0x72/0x73, but at least
on some VIA chipsets (I tested the VIA VT8237R on actual hardware)
these ports won't work and you have to use 0x74/0x75. Thus, make this
a Kconfig option for now.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3202 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Somewhere characters are getting sign-extended, meaning that the
attributes of the drawing chars (>= 128) are wrong. Cast the value
before sending it to VGA.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3195 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
bcd2dec()/dec2bcd() functions we'll need for (among other things)
converting some date/time parameters in CMOS.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3192 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Show PCI IDs as 4-digit numbers always.
- Cosmetic changes to make UI look more consistent.
- Drop MODULE_COUNT #define and use ARRAY_SIZE() where needed.
- Small fix to improve build system (create build/ when not there).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3191 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
strange reason (broken curses/VGA display, maybe others).
It'll be re-enabled when we fixed that.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3190 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
supported features configurable later (currently unused). Store all
build files and results (coreinfo.elf) in build/ now.
I'm self-acking this as (though non-"trivial") it doesn't affect coreinfo
in its functionality, this is more or less a "cosmetic" change to the
build interface ("make" -> "make menuconfig && make").
This is a kconfig checkout from the Linux kernel (where kconfig is being
actively maintained) from 03/2008. The hash identifying the last commit
to kconfig is 587c90616a5b44e6ccfac38e64d4fecee51d588c.
The amount of changes to kconfig itself has been kept as small as possible
to keep the diff small and to ease updating/porting to newer kconfig versions.
The following changes were performed on the upstream Linux kconfig:
- s/kernel/coreinfo/, and s/Linux/coreinfo/ in various strings.
- Consistently use the env. variable KERNELVERSION in all kconfig
interfaces -- e.g. config/menuconfig/gconfig/xconfig -- as version number.
- Hardcode our paths/filenames in some places (could be improved upstream).
- Always write .config and build/config.h, no matter which kconfig
interface is used (config/menuconfig/gconfig/xconfig). We want to
include build/config.h in our code.
- Adapt the kconfig Makefile for our purposes (build/ directory, rules, etc).
In addition, a few items in the coreinfo Makefile are needed for this to work.
This kconfig setup is successfully tested with all targets from 'make help':
config - Update current config utilising a line-oriented program
menuconfig - Update current config utilising a menu based program
xconfig - Update current config utilising a QT based front-end
gconfig - Update current config utilising a GTK based front-end
oldconfig - Update current config utilising a provided .config as base
silentoldconfig - Same as oldconfig, but quietly
randconfig - New config with random answer to all options
defconfig - New config with default answer to all options
allmodconfig - New config selecting modules when possible
allyesconfig - New config where all options are accepted with yes
allnoconfig - New config where all options are answered with no
For 'make defconfig' to work you have to do (which we don't need in coreinfo):
$ mkdir configs; touch configs/defconfig
You can also use 'make foo_defconfig' in which case kconfig will use a
file called 'configs/foo_defconfig' as basis.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3188 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, disable header() for now, as it's not being used.
Here are some stats on size differences:
- ls
23820 coreinfo.old.elf
23564 coreinfo.new.elf
- size *elf
text data bss dec hex filename
15199 2468 181904 199571 30b93 coreinfo.old.elf
14934 2468 181912 199314 30a92 coreinfo.new.elf
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3187 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
VGA cursor position register.
Have vga_scroll_up() and vga_clear_line() present row/column
arguments to the VIDEO() macro in the right order.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
-This line, and those below, will be ignored--
M libpayload/drivers/vga.c
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3186 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This even fixes two bugs:
- get_cpu_speed() didn't return a value.
- The line
win->_color - PAIR_NUMBER(0);
should actually be
win->_color = PAIR_NUMBER(0);
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3182 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Removes reference to BusyBox.
Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3178 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
We need to think about the exact API we want to expose later, though.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3177 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Adding -Os to the CFLAGS gains us about 25% smaller code (give or take).
Unfortunately, it exposes a strange issue where strcpy() suddenly goes
missing - we think that strcpy() is being provided by libgcc, and that
for some reason, -Os changes the beahavior. Oh, well - add a quick
strcpy() function and we're good.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3175 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is the intial release of the coreinfo payload code.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3173 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is external and properly licensed code that I pulled into the tree.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3171 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This is the initial chunk of code written by me and copyrighted
by AMD. Includes everything but a few files that we pulled from
outside sources.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3170 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Jordan Crouse