Turned out that there are versions of the patch command that use the
left hand side path for new files created by a patch. This behavior is
incompatible with some of our patches. Stripping the topmost dir from
the path with -p1 helps.
While touching that line, I couldn't resist to drop a command
substituion (the `echo $patch`). It really shouldn't be necessary as the
path to the patch file is already expanded in the head of the for loop.
Change-Id: I95398605db6dd54a8b08d8bc84c6602edbea6e10
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/15908
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
When no CFLAGS are explicitly provided to it, the GMP configure script
will figure out the best optimization flags to use on its own. In
particular, it will setup the march, mfpu and mtune flags based on
hardware detection.
However, when CFLAGS are provided, they are used as-is and such
detection doesn't happen. When the march, mfpu and mtune flags are not
provided (which happens when GMP wasn't built already), not only will
related optimizations be disabled, but some code might not build because
of missing support. This happens with NEON instructions on ARMv7 hosts.
Thus, it is better not to set CFLAGS and leave it up to the GMP
configure script to get them right and still reuse those later.
Change-Id: I6ffcbac1298523d1b8ddf29a8bca1b00298828a7
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15452
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
The binutils patch went in without updating the revision,
so we need to update it now. This was done in commit bcfa7ccb
(buildgcc: Update to binutils-2.26.1 & Fix aarch64 build issue)
Change-Id: Ifad4a2e3973f1f60d0ea840945e2bd097e1b4474
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15712
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Update to the latest version of GNU binutils
- Add a patch to undo the changes to binutils done by commit c1baaddf
so that arm-trusted-firmware builds correctly again.
Test: Build arm-trusted-firmware (ATF) with this patch. Build ATF
with binutils 2.26.1 changing the '.align x,0' to '.align x', which
changes the padding bytes to NOP instructions. Verify that everything
except the padding bytes is the same.
See https://sourceware.org/bugzilla/show_bug.cgi?id=20364 for more
information about this issue.
Change-Id: I559c863c307b4146f8be8ab44b15c9c606555544
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15711
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Bootstrapping gcc is the recommended way if your host gcc's version
doesn't match the gcc version you're going to build. While a build
with an outdated host gcc usually succeeds, an outdated gnat seems
to be a bigger issue.
v3: Some library controversy: gcc likes the libraries it ships with
most but we don't want to install shared libraries. So we build
them static --disable-shared) and install only the minimum
(libgcc, libada, libstdc++). However, as the code of these
libraries might be used to build a shared library we have to
compile them with `-fPIC`.
v4: o Updated getopt strings.
o The workaround for clang (-fbracket-depth=1024) isn't needed
for bootstrapping and also breaks the build, as clang is only
used for the first stage in that case and gcc doesn't know
that option.
So far build tested with `make BUILDGCC_OPTIONS="-b -l c,ada"` on
o Ubuntu 14.04 "Trusty Tahr" (i386)
o Debian 8 "Jessie" (x86_64) (building python (-S) works too)
o current Arch Linux (x86_64)
o FreeBSD 10.3 (x86_64) (with gcc-aux package)
and with clang host compiler, thus C only: `make BUILDGCC_OPTIONS="-b"`
on
o Debian 8 "Jessie" (x86_64)
o FreeBSD 10.3 (x86_64)
v5: Rebased after toolchain updates to GCC 5.3.0 etc.
Build tested with `make BUILDGCC_OPTIONS="-b -l c,ada"` on
o Debian 8 "Jessie" (x86_64)
Change-Id: Icb47d3e9dbafc55737fbc3ce62a084fb9d5f359a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13473
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Refactor build() to make things more flexible:
Add a parameter that tells if we build a package for the host or for a
target architecture. This is just passed to the build_$package()
function and can be used later to take different steps in each case
(e.g. for bootstrapping a host gcc).
Move .success files into the destination directory. That way we can tell
that a package has been built even if the package build directory has
been removed.
Change-Id: I52a7245714a040d11f6e1ac8bdbff8057bb7f0a1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Update gdb to 7.11 and expat to 2.1.1
riscv64-elf is still broken.
Change-Id: Id7605f4274fcb15f9c3e366f5c492328f70f7956
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14461
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
New tools:
* mpfr 3.1.4
* binutils 2.26
* gcc 5.3.0
* llvm/clang 3.8.0
Patch changes:
* binutils-2.25_fix-aarch64.patch: fixed in 2.26
* binutils-2.25_host-clang.patch: the positions of header file
includes have been adjusted
* binutils-2.25_no-bfd-doc.patch: update to 2.26
* binutils-2.25_riscv.patch: update from riscv-gnu-toolchain
* gcc-5.2.0_elf_biarch.patch: update to 5.3.0
* gcc-5.2.0_gnat.patch: update to 5.3.0
* gcc-5.2.0_libgcc.patch: update to 5.3.0
* gcc-5.2.0_nds32.patch: update to 5.3.0
* gcc-5.2.0_riscv.patch: update from riscv-gnu-toolchain
* cfe-3.7.1.src_frontend.patch: update to 3.8.0
In the latest code of riscv-gnu-toolchain project, the patch for
{binutils,gcc}/config.sub has been removed, and the target is renamed
as riscv32 and riscv64. The `riscv' to `riscv64' change in xcompile is
in another commit.
Test results:
All GCC and LLVM/clang toolchain build successfully.
x86,arm: qemu boots
power8: firmware fails to boot
aarch64,mips: not tested
riscv: firmware fails to build with new binutils
clang: firmware fails to boot
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I42ce89c29263d768d161c28199994f17d0389633
Reviewed-on: https://review.coreboot.org/14227
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Always set HOSTCFLAGS to the flags GMP was built with, defaulting to
"-Os" if it isn't built yet. Previously, if GMP was already built or
not even in the list of packages to be built, this was silently skipped
and other packages were built with empty HOSTCFLAGS.
Change-Id: I29b2ea75283410a6cea60dc1c92b87573aebfb34
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13550
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The xz archives are slightly smaller than the bz2 archives for gmp
and mpfr, so use them instead to speed up the download.
Change-Id: I3729455cdbc46e5a0cff119ecca97b0e00c3d402
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14462
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Both packages are not using the target architecture. Drop it,
and remove them from package_uses_targetarch
Change-Id: I58efde4cb7cc39e7e3c31527eb7682e318928100
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14464
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Store both the version number and git hash in the file name
when copying the buildgcc script to the destination directory.
Also, fix the quoting in the lines touched anyways, and move the
script to $TARGETDIR/share/
Change-Id: Ib37dc2be57ee7f0ae18a0b954f537f8b4c2db9d0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14347
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Many of the tools and libraries don't use a target architecture, but
they were still getting put in one. This change separates out the
builds that need the target architecture from the ones that don't,
and sets the build directory accordingly.
This will help keep from rebuilding the libraries when building all
of the tools if you keep the temporary files around (-t option).
Change-Id: Id6c17719332f2244657f103f5f07ca7812d51af1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On certain versions of /bin/sh the following sequence
causes problems.
'$CC --version | grep clang &>/dev/null && ...'
The above is a bashish for 2>&1 >/dev/null. However, buildgcc
is interpeted by /bin/sh which doesn't necessarily mean bash.
On dash it's effectively forking grep off into the background
and always evaluating an empty statement to /dev/null while
unconditionally running whatever follows the &&.
Change-Id: Ie3a2ebb12226434d50a7b2a7e254c8b80ae4c46b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14281
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
On certain versions of /bin/sh assigning variables with spaces
unquoted leads to failures. Therefore, quote variables that
are known to be passed in that have spaces.
Change-Id: I007c56c3bfb8183bb4b16cf0591f6aa508fd105d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14280
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Otherwise, on OS X, some architectures will fail
to build libgcc (verified for ARM toolchain).
Change-Id: I8b58e0582596ad39cad92e9d478158c46a96a26e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14256
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Most cross compilers fail to compile on systems with Clang being the
default compiler (OS X and some BSDs). Clang dislikes some of GCC's
autogenerated code. We also missed switching CFLAGS to CXXFLAGS when GCC
switched to C++ compilation per default.
Change-Id: I87caa1a15982c431048aa79748ea7ef655a9a3a1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14232
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add check_for_library routine to test for missing libraries.
- Add a check for zlib.
- Remove 'utility' text from please_install() routine since we can test
for libraries or utilities now.
- Remove incorrect 'solution' text from alternate install since I was
updating that line.
Change-Id: Id5ef28f8bde114cbf4e5a91fc119d42593ea6ab2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14147
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These are multi-threaded decompressors for .gz and .bz2 compressed
files. If they're installed, use them to decompress, if they're not,
use the standard single-threaded decompressors.
Change-Id: I397740817e6b234a43b62075899964bdab14f121
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14146
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a newline after the supported version text.
Move $TARGETDIR left so that longer paths print better.
Change-Id: If520e1b8657a526dee27763aee62cb78777d020d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14145
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is required on powerpc64 to build both little endian and big endian
libgcc.
Change-Id: I295c8ee5e8131d4108e98d1bfd53abb8bd8982b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14163
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Update IASL from 20150619 to 20160318
See release notes at acpica.org
Change-Id: Ic7e7b3956378ad611069e984d5a59c78e4cb08b1
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/12817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Add powerpc64le-linux-gnu & nds32le-elf to the instructions as
supported architectures
- Add nds32le-elf as a supported architecture so it will stop warning
when you build it.
Change-Id: Ifcdbc3d082eae5b9b5f8828914e7d2b7ed1f13a4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13961
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add a comment to try to lower possible confusion later if the jenkins
tool builder fails to build a new tool. The URLs for the packages that
are downloaded are checked against known locations so that someone can't
maliciously download a package from somewhere and run it on the build
server. This provides a little bit of security, but could confuse
someone if they don't realize it.
Change-Id: I7858e3d86fc705b480f6792b6adf3d5349580e01
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13955
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Numerous changes have gone in since the last bump, let's increase
the version.
Change-Id: Ie3ae8c24b26bd22b70bc5ddf5c1125b5b1d3a021
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13873
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This should allow the builder to download the packages securely.
Change-Id: If5feeff85bd551cbe08849421197d11cc2432d1e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13867
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When writing to a logfile, the color codes just make things confusing.
The --nocolor option will allow these to not be printed.
Change-Id: I67645aac20b420ac83b828e77e0e50aab88d3d47
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
qemu-power8 wants to tell about itself with XML, and so
we need to build gdb with EXPAT so it can understand XML.
Change-Id: I460e27f883956ed5d54e6070916e2682ee0f7a1b
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13846
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Power 8 was once again having build issues. Adding --with-system-zlib
fixes them. It seems the builtin one is only needed when you are going
to build programs, and it falls apart in other cases.
Searching --with-system-zlib reveals this to be a very popular topic.
This has not broken other toolchain builds (for me); it should not for
anyone else. Then again, this is gcc, about which I need say no more.
Change-Id: Ica9d057d88982543b5dda471cc949c31fe15932f
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13700
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Apparently acpica-unix is shipped under
"A non-open source license (the 'Intel license')" while acpica-unix2
comes under GPLv2/BSD dual license. (see https://acpica.org/Licensing)
So go with unix2.
Change-Id: I412812187bbf488eb4ad6d7fb8d2840f2f5e06d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13686
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Make the gcc build system create multiple libgcc.a instances for
different ABIs.
Change-Id: I1c888bf751bf43566da8927ed0aedb53857363bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13625
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Not much testing, update mostly so we can test with the
latest scan-build.
Change-Id: I50d28b7e0dfd31f9ae565c8515d5ab1760ca4c62
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13516
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The compiler really supports a whole line of ARM CPUs, not just
ARMv7a:
arm-eabi-gcc: note: valid arguments to '-march=' are: armv2 armv2a
armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m
armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m
armv7-r armv7e-m armv7ve armv8-a armv8-a+crc iwmmxt iwmmxt2 native
So let's reflect this in the cross compiler name.
Change-Id: I717760d80954655b2de9ae019b813d81e9a75762
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13515
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It may still fail on non-Linux, and the compiler may do fancy things,
but it builds.
Change-Id: If3456f5fef8d01082a49978dc7cda5450f96f5cc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13416
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
GMP's configure tries to build for 64-bit with a 32-bit userspace on
NetBSD too. Help it by forcing ABI=32.
Change-Id: I290ea0ef1626fdd88dc3ff74fadb9578ef6a1c9c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13067
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This reverts commit 89798bcb0c.
Disable building gnat again as it turned out that many distros don't
ship with a sufficient recent version of gnat. We'll have to find a
reliable way to check for the installed gnat version and query the
user or bootstrap gcc in that case.
Change-Id: Ife7cf7c9d1567aca898ce308b120a7b9e146e5f5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13422
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
I thought we'd be using gnatmake but it's deprecated. Who needs it
anyway?
Change-Id: Ic08add72e771fa346c8a736ea901863ea5737d91
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13041
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of printing out a single tool that needs to be installed
each time buildgcc is run, print out the entire list of tools
to be installed, then halt.
Change-Id: I7761760eef3c45ba371f882a4f987408945bb3e5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12856
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Previously, when we tested for g++ and two different versions of clang,
if the earlier versions were not found, buildgcc would still request
that they be installed. This obviously isn't needed, and isn't the
desired outcome.
Now, if one of the first tests fails, nothing gets printed. If all
the tests fail, it tells you to install either g++ or clang.
Change-Id: I71359f59c4c6bee3c3c55e4e6105f11e6ca51527
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12852
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This reverts commit 68d0e4a5a1.
Special handling of MPFR is no longer needed with the latest
MPFR release.
Change-Id: I96d9ea92cfb74eed6af2ba62254f0678081e2b4f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12833
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The current MPFR version contains a stale config.guess file
that requires special handling on ppc64el systems. Bump
the MPFR version to the latest release.
Change-Id: I5e86c732c09f8a6a43f9812452124d64d337ea3f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12832
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The config.guess file included with MPFR is completely obsolete,
leading to build failures on ppc64el due to the system architecture
not being detected. Regenerate the files from the host system via
automake before attempting to build MPFR.
Change-Id: I00fc16003906e373d112c25978197ac907adccfd
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12816
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The previous official GMP release (6.0.0) contains a bug that
prevents compilation on ppc64el systems. Increase version
to the latest version (6.1.0).
Bug details:
gcc build on ppc64el fails with:
(.text+0x4c): undefined reference to `BMOD_1_TO_MOD_1_THRESHOLD'
While I don't have an exact commit hash due to Hg use upstream,
a missing BMOD_1_TO_MOD_1_THRESHOLD define on ppc64el was quietly
fixed in Hg before the 6.1.0 release.
Change-Id: I1c05a1c194141db5f8522148c2e20e7558d34714
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12811
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Nico Huber