The Kconfig variable indicates KB, but the number used was bytes.
Let's just assume KB is correct for now.
Change-Id: I910c126104f0222fc48b70a18df943f2afddeca3
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2341
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Except for one board, the flags can be derived from CONFIG_MMX
and CONFIG_SSE.
Change-Id: I64a11135ee7ce8676f3422b2377069a3fa78e24d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2336
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The bootblock is typically run before fpu/mmx/sse setup, so
we can't rely on -mcpu=p4 and the like to increase the
register space.
bootblock_romccflags does that for SSE, but they're controlled
separately.
Change-Id: I2b0609ac18b2394a319bf9bbbee1f77d2e758127
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2335
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tiano for X64 is much cleaner to start up when using higher alignments in
firmware volumes. These are implemented using padding files and sections
that cbfstool knew nothing about. Skip these.
Change-Id: Ibc433070ae6f822d00af2f187018ed8b358e2018
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2334
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On platforms with CBFS data filling end of ROM image without bootblock in the
end (ex, ARM), calculation of "next valid entry" may exceed ROM image buffer in
memory and raise segmentation fault when we try to compare its magic value.
To fix this, always check if the entry address is inside ROM image buffer.
Verified to build and boot successfully on qemu/x86 and armv7/snow.
Change-Id: I117d6767a5403be636eea2b23be1dcf2e1c88839
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2330
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This is a first-pass attempt at cleaning up the coreboot tables
for ARM. The most noticable difference is that there is no longer
both a high and a low table.
Change-Id: I5ba87ad57bf9a697b733511182c0326825071617
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2329
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This cleans up Snow's trivial ramstage, gives it a coreboot table
address and calls hardwaremain().
Change-Id: I84c904bcfd57a5f9eb3969de8a496f01e43bc2f6
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2328
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This adds a BL1_SIZE_KB config variable so that we can get rid of
some magic constants.
Change-Id: I9dbcfb407d3f8e367be5d943e95b032ce88b0ad0
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2332
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Explicitly including it allows us to get rid of some magic constants
in the bootblock linker script.
Change-Id: I095899babc997addce6b383f00e5ebf135e99d5e
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2331
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This seemed to have been introduced in fe422184.
Change-Id: I4f9ecfbec42aa8c0bb8887675a3add8951645b98
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2327
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Add a comment explaining that the existing lock bit logic is correct
and "as designed" even though the manual states otherwise. This way
people don't have to "just know" what is going on.
Change-Id: I14e6763abfe339e034037b73db01d4ee634bb34d
Signed-off-by: Mike Frysinger <vapier@chromium.org>
Reviewed-on: http://review.coreboot.org/2326
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
This hit me when running the latest Qemu with coreboot:
First the graphics OPROM is running, then an iPXE OPROM.
The iPXE OPROM has no int10 support (obviously) so calling
vbe_set_graphics() wipes the framebuffer information from
the coreboot table.
Change-Id: Ie0453c4a908ea4a6216158f663407a3e72ce4d34
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2325
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Just a tiny mistake, but it made the console driver assume that
CMOS data isn't available.
Change-Id: I4e6f53e9ed59024de7b09333f82f0ce3235ef8f6
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/2323
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Not sure why this didn't bite us earlier..
src/device/oprom/realmode/x86.c: In function 'fill_lb_framebuffer':
src/device/oprom/realmode/x86.c:272:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:274:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:275:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:276:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:278:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:280:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:281:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:283:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:284:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:286:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:287:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:289:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:290:13: error: dereferencing pointer to incomplete type
Change-Id: Ie3b0f731a7b995e954a26e745b07fc122088ca9f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2321
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Exynos system clock can be initialized before RAM init, not necessary to be in
the very beginning (boot block). This helps reducing bootblock dependency.
Verified to boot on armv7/snow.
Note: this patch was originally introduced in 2308, but there were
some ordering issues so it was reverted.
Change-Id: Ibc91c0e26ea8881751fc088754f5c6161d011b68
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2320
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use same console initialization procedure for all ARM stages (bootblock,
romstage, and ramstage):
#include <console/console.h>
...
console_init()
...
printk(level, format, ...)
Verified to boot on armv7/snow with console messages in all stages.
Change-Id: Idd689219035e67450ea133838a2ca02f8d74557e
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2301
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Revise console source file dependency (especially for EARLY_CONSOLE) and
interpret printk/console_init according to EARLY_CONSOLE setting (no-ops if
EARLY_CONSOLE is not defined).
Verified to boot on x86/qemu and armv7/snow. Disabling EARLY_CONSOLE correctly
stops romstage messages on x86/qemu (armv7/snow needs more changes to work).
Change-Id: Idbbd3a26bc1135c9d3ae282aad486961fb60e0ea
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2300
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Early console should always be allowed to be turned on / off (for generating
production and debug versions), and should not be enforced by "select" Kconfig
rule.
A new "DEFAULT_EARLY_CONSOLE" is introduced for devices to select if they
prefer early console output by default.
Verified Kconfig value on qemu/x86 (default y by CACHE_AS_RAM), snow/x86
(default y by EXYNOS5 config), and intel/jarrell (default n).
Change-Id: Ib1cc76d4ec115a302b95e7317224f1a40d1ab035
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2307
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
For Exynos platforms, the UART component on pinmux must be first selected and
configured. This should be done as part of UART console initialization.
Note, that the current implementation hard-codes the device index as UART3,
while the base port can be assigned to different device in Kconfig. This will be
fixed later.
Verified to work on armv7/snow.
Change-Id: Ie63e76e2dac09fec1132573d1b0027fce55333a1
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2315
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The console drivers (especially serial drivers) in Kconfig were named in
different styles. This change will rename configuration names to a better naming
style.
- EARLY_CONSOLE:
Enable output in pre-ram stage. (Renamed from EARLY_SERIAL_CONSOLE
because it also supports non-serial)
- CONSOLE_SERIAL:
Enable serial output console, from one of the serial drivers. (Renamed
from SERIAL_CONSOLE because other non-serial drivers are named as
CONSOLE_XXX like CONSOLE_CBMEM)
- CONSOLE_SERIAL_UART:
Device-specific UART driver. (Renamed from
CONSOLE_SERIAL_NONSTANDARD_MEM because it may be not memory-mapped)
- HAVE_UART_SPECIAL:
A dependency for CONSOLE_SERIAL_UART.
Verified to boot on x86/qemu and armv7/snow, and still seeing console
messages in romstage for both platforms.
Change-Id: I4bea3c8fea05bbb7d78df6bc22f82414ac66f973
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2299
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This reverts commit 9029f4b63f
This patch needs to go at the end of the UART patch set. Sorry 'bout the confusion!
Change-Id: I5702c7d6130daf95776f2c15d24e5d253691cefd
Reviewed-on: http://review.coreboot.org/2319
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Exynos system clock can be initialized before RAM init, not necessary to be in
the very beginning (boot block). This helps reducing bootblock dependency.
Verified to boot on armv7/snow.
Change-Id: Ic863e222871a157ba4279a673775b1e18c6eac0d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2308
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The prototypes that were recently defined only work for the
internal implementations.
Change-Id: Ib34bb75a0b882533da550b9cd17cd777c2463e02
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/2318
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The power_init is not required on Exynos 5250 (snow) in bootblock stage. To get
a cleaner and faster bootblock, we can remove it.
Note, power_init internally calls max77686 and s3c24x0_i2c, so both files are
also removed.
Verified to boot on armv7/snow.
Change-Id: I5b15dfe5ac7bf4650565fea0afefc94a228ece29
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2317
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The I2C initialization (on component MAX77688) is already done in power_init, so
we should not need an explicit call inside bootblock.
Verified to boot on armv7/snow.
Change-Id: I68c248a8b5fee4ab838b2fb708649e112559cc41
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2316
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Remove duplicated / testing code and share more driver for bootblock, romstage
and ramstage.
The __PRE_RAM__ is now also defined in bootblock build stage, since bootblock is
executed before RAM is initialized.
Change-Id: I4f5469b1545631eee1cf9f2f5df93cbe3a58268b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2282
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
For x86, the old CBFS search behavior was to bypass bootblock and we should keep
that. This will speed up searching if a file does not exist in CBFS.
For arm, the size in header is correct now so we can remove the hack by
CONFIG_ROM_SIZE.
Change-Id: I541961bc4dd083a583f8a80b69e293694fb055ef
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2292
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
"SPL" from U-Boot is deprecated by bootblock in coreboot/arm, so we don't need
it anymore.
Change-Id: Id16877075d0b870839a10160073ad70777a2af0a
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2297
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This attempts to clean out some dead code which was copy + pasted
into Snow's bootblock.c file, along with some unnecessary headers.
Change-Id: If9f157a52395a047c249a2a6385e0e8ddf310e59
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2291
Tested-by: build bot (Jenkins)
hang() is the legacy function from U-boot and should be replaced by hlt() in
coreboot.
Change-Id: I0f390b1b6f9ff71487ea36cf16c462724b66d8ca
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2298
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Added casts and a couple of #ifdefs to fix the warnings in the
vendorcode/amd/agesa/f14 codebase. This will allow us to re-enable
'all warnings being treated as errors' in boards such as Persimmon
that are using this code. That change will follow.
These are the warnings that are fixed by this patch:
src/vendorcode/amd/agesa/f14/Legacy/Proc/hobTransfer.c: In function 'CopyHeapToTempRamAtPost':
src/vendorcode/amd/agesa/f14/Legacy/Proc/hobTransfer.c:219:28: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f14/Legacy/Proc/hobTransfer.c: In function 'CopyHeapToMainRamAtPost':
src/vendorcode/amd/agesa/f14/Legacy/Proc/hobTransfer.c:372:30: warning: comparison between pointer and integer [enabled by default]
src/vendorcode/amd/agesa/f14/Legacy/Proc/hobTransfer.c:381:33: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/cpuApicUtilities.c: In function 'ApUtilSetupIdtForHlt':
src/vendorcode/amd/agesa/f14/Proc/CPU/cpuApicUtilities.c:863:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/cpuApicUtilities.c:872:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/cpuMicrocodePatch.c: In function 'LoadMicrocode':
src/vendorcode/amd/agesa/f14/Proc/CPU/cpuMicrocodePatch.c:211:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c: In function 'HeapManagerInit':
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:167:52: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:183:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c: In function 'HeapGetBaseAddress':
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:669:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:676:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:683:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:684:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:687:23: warning: assignment makes integer from pointer without a cast [enabled by default]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:691:21: warning: assignment makes integer from pointer without a cast [enabled by default]
src/vendorcode/amd/agesa/f14/Proc/CPU/heapManager.c:696:3: warning: return makes pointer from integer without a cast [enabled by default]
In file included from src/mainboard/amd/persimmon/agesawrapper.h:30:0,
from src/northbridge/amd/agesa/family14/northbridge.c:36:
src/vendorcode/amd/agesa/f14/AGESA.h:1132:0: warning: "TOP_MEM" redefined [enabled by default]
In file included from src/northbridge/amd/agesa/family14/northbridge.c:34:0:
src/include/cpu/amd/mtrr.h:31:0: note: this is the location of the previous definition
In file included from src/mainboard/amd/persimmon/agesawrapper.h:30:0,
from src/northbridge/amd/agesa/family14/northbridge.c:36:
src/vendorcode/amd/agesa/f14/AGESA.h:1133:0: warning: "TOP_MEM2" redefined [enabled by default]
In file included from src/northbridge/amd/agesa/family14/northbridge.c:34:0:
src/include/cpu/amd/mtrr.h:34:0: note: this is the location of the previous definition
Verified on persimmon.
Change-Id: I1671b191c72dfc1d63ada41126ae3418bc8f86ae
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/2293
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Steven Sherk <steven.sherk@se-eng.com>
In case that the new toolchains don't work well, we can trace back
and reproduce the old tools by checking the xgcc folder. It is useful
when my team members need to get my old toolchains on their own host
machines.
Change-Id: I54e4bc6afcfbbf622165af6eae27bbb6efc2e8cc
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2247
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The common part of the bootblock resets the nvram data if it's found
to be invalid. Since that code is compiled with romcc in i386 mode,
there's a shortage on registers.
Try to reduce the strain by doing things smarter: cmos_write_inner
is the same as cmos_write, just that it doesn't check if the RTC is
disabled. Since we just disabled it before, we can assume that it is so.
Change-Id: Ic85eb2a5df949d1c1aff654bc1b40d6f2ff71756
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2296
Tested-by: build bot (Jenkins)
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
For arm/snow, current bootblock is larger than previously assigned CBFS offset
and will fail to boot. To prevent this happening again in future, cbfstool now
checks if CBFS will overlap bootblock.
A sample error message:
E: Bootblock (0x0+0x71d4) overlap CBFS data (0x5000)
E: Failed to create build/coreboot.pre1.tmp.
arm/snow offset is also enlarged and moved to Kconfig variable.
Change-Id: I4556aef27ff716556040312ae8ccb78078abc82d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2295
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Some variables are using incorrect data type in debug messages.
Also corrects a typo (extra 'x').
Change-Id: Ia3014ea018f8c1e4733c54a7d9ee196d0437cfbb
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2294
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This patch moves ARM core and DRAM timing functions around to simplify
the dependencies for system_clock_init().
The original code was architected such that the system_clock_init()
function called other functions to obtain core and memory timings.
Due to the way memory timing information must be obtained on Snow,
which entails decoding platform-specific board straps, the bottom-
up approach resulted in having the low-level clock init code
implicitly depend on board and vendor-specific info:
main()
->system_clock_init()
-> get_arm_ratios()
-> CPU-specific code
-> clock_get_mem_timings()
-> board_get_revision()
-> read GPIOs (3-state logic)
-> Decode GPIOs in a vendor-specific manner
-> Choose memory timings from module-specific look-up table
...then proceed to init clocks
...come back to main()
The new approach gathers all board and vendor-specific info in a
more appropriate location and passes it into system_clock_init():
main()
-> get_arm_ratios()
-> CPU-specific code
-> get_mem_timings()
-> board_get_config()
-> read GPIOs (3-state logic)
-> Decode GPIOs in a vendor-specific manner
-> Choose memory timings from module-specific look-up table
-> system_clock_init()
...back to main()
Change-Id: Ie237ebff76fc2d8a4d2f4577a226ac3909e4d4e8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2271
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This gets rid of a bunch of duplicate I2C code in the bootblock.
Change-Id: I51f625a0f738cca4ed2453fbcb78092e4110bc7e
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2289
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This gets rid of a bunch of copy + pasted GPIO code.
Change-Id: I548b2b5d63642a9da185eb7b34f80cbebf9b124f
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2288
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Move the ID section again due to bootblock bloat. So long
as it's within the first 32K of our address space, we're good.
TODO:
1. Place ID section near start of ROM to avoid this issue.
2. Reduce bootblock bloat.
3. Make bootblock debugging a Kconfig option.
Change-Id: I3f0764a3345a8cbbafcc15e4d06c38cd6327758c
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2287
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Right now cbfstool only accepts firmware volumes with
a x86 SEC core and refuses an x86-64 SEC core because
some magic values and the extended PE header are
different. With this patch, both IA32/x64 images are
supported. (No check is done whether the mainboard
actually supports 64bit CPUs, so careful!)
This needs another patch to Tiano Core that switches
to long mode after jumping to the 64bit entry point.
Right now that code assumes we're already in 64bit code
and the machine crashes.
Change-Id: I1e55f1ce1a31682f182f58a9c791ad69b2a1c536
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2283
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
We don't need a special Kconfig variable anymore
because the FV _is_ the payload, unlike with the
old tianocoreboot implementation.
Change-Id: I349b5a95783e4146e3ab7f926871188cf2021935
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2284
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
This gets rid of a bunch of copy + pasted code from Exynos UART
files.
Change-Id: I9fbb6d79a40a338c9fdecd495544ff207909fd37
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2286
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Some header content got duplicated during the initial porting
effort. This moves generic UART header stuff to exynos5-common
and leaves exynos5250 #defines in the AP-specific UART header.
Change-Id: Ifb6289d7b9dc26c76ae4dfcf511590b3885715a3
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2285
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This removes the hack implemented in http://review.coreboot.org/#/c/2280
(and should make using 64bit Tiano easier, but that's not yet supported)
Change-Id: Ie30129c4102dfbd41584177f39057b31f5a937fd
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2281
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
add-payload, add-stage, and add-flat-binary are now all using cbfs_image API.
To test:
cbfstool coreboot.rom add-stage -f FILE -n fallback/romstage -b 0xXXXX
cbfstool coreboot.rom add-payload -f FILE -n fallback/pyload
And compare with old cbfstool.
Verified to boot on ARM(snow) and X86(qemu-i386).
Change-Id: If65cb495c476ef6f9d90c778531f0c3caf178281
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2220
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The "add" command is compatible with all legacy usage. Also, to support
platforms without top-aligned address, all address-type params (-b, -H, -l) can
now be ROM offset (address < 0x8000000) or x86 top-aligned address (address >
0x80000000).
Example:
cbfstool coreboot.rom add -f config -n config -t raw -b 0x2000
cbfstool coreboot.rom add -f stage -n newstage -b 0xffffd1c0
Verified boot-able on both ARM(snow) and x86(QEMU) system.
Change-Id: I485e4e88b5e269494a4b138e0a83f793ffc5a084
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2216
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Usage Changes: To support platforms with different memory layout, "create" takes
two extra optional parameters:
"-b": base address (or offset) for bootblock. When omitted, put bootblock in
end of ROM (x86 style).
"-H": header offset. When omitted, put header right before bootblock,
and update a top-aligned virtual address reference in end of ROM.
Example: (can be found in ARM MAkefile):
cbfstool coreboot.rom create -m armv7 -s 4096K -B bootblock.bin \
-a 64 -b 0x0000 -H 0x2040 -o 0x5000
Verified to boot on ARM (Snow) and X86 (QEMU).
Change-Id: Ida2a9e32f9a459787b577db5e6581550d9d7017b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2214
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
To support platforms without top-aligned address mapping like ARM, "locate"
command now outputs platform independent ROM offset by default. To retrieve x86
style top-aligned virtual address, add "-T".
To test:
cbfstool coreboot.rom locate -f stage -n stage -a 0x100000 -T
# Example output: 0xffffdc10
Change-Id: I474703c4197b36524b75407a91faab1194edc64d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2213
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
David Hendricks