Align the PSP's NVRAM item since it's intended to be updateable
in the flash device.
Change-Id: I6b28525624b95b411cc82de0cbe430ea7871149d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Allow the soc build to pass a soft fuse value to the utility. This
helps maintain compatibility across PSP generations.
Add a generic 'other' item to the amd_fw_entry structure that may
be used by non-fuse entries in the future.
TEST=Verify google/grunt amdfw.rom unchanged before and after.
Compare internal board using override before and after.
Change-Id: I26223f0b42ad28c43d9bd87419a2a8f719ee91cb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
A side effect of the change 8e0dca05
"util/amdfwtool: Add generic image copy function"
was to treat a read operation of zero bytes as a failure. Some
implementations exist that use zero length files as a means of
removing functionality. This causes amdfwtool to exit with an
error.
Put the zero length capability back in, and generate the requested
table entry with a length field of 0x0.
TEST=Boot google/grunt, inspect PSP directory table
BUG=b:128507639
Change-Id: Ifc9204dbbf6b107f06116362358ab9d22caa71df
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31891
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Complete the removal of the fanless command line options. The only soc
using them has been converted to use the subprogram option instead.
TEST=Verify amdfw.rom is unchanged before and after the conversion
BUG=b:126691068
Change-Id: I187f17743cc98cc136b0df61caf8e95d17f98d51
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31737
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Separate the type field for the PSP directory table to better match the
AMD Platform Security Processor BIOS Architecture Guide (order #55758,
NDA only). Instead of a 32-bit type, change to an 8-bit value and an
8-bit subprogram field to allow for a more generic application across
family/model products.
This patch also eliminates the "fanless" types, previously added for
stoneyridge, and converts the --smufnfirmware and --smufnfirmware2
arguments to use a subprogram value of 1.
Subsequent patches will change the stoneyridge makefile to use the
new option, and eliminate the fanless arguments.
TEST=Boot google/grunt, confirm no difference in amdfw.rom file.
BUG=b:126691068
Change-Id: If8f33000c31cba21f286f54459de185c21e46268
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31735
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace variables and function arguments with a context that may be
maintained and passed. Add macros to clarify the pointer math. Add
functions to generate tables instead of relying on correct ordering
and math. Use defined sizes for tables instead of arbitrary additions
to an index.
TEST=Verify no difference in amdfw.rom for google/grunt before and
after, and verify a grunt build with PSP_COMBO=1 runs.
Change-Id: I7ad12fa5d615d1aa3648db40e3ea75f8cf2ed59a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Consolidate the code that opens, stats, copies, and closes the
individual files into a single function.
TEST=Verify no difference in amdfw.rom for google/grunt before
and after the patch is applied
Change-Id: I2da0dd79186ccc8c762b58cf3decb9980378a5f7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Rename psp_fill_head() and call it with the cookie to populate the
header. The combo header and PSP directory header are similar and
should be calculated the same way.
Change-Id: I7e634542de65576addadbe683596cbe572de3dcd
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31732
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are effectively two unique sets of arguments for the utility,
causing one of two tables to be constructed. Both tables are
identical, however, and therefore the only practical difference is
the offset in the Embedded Firmware Structure which holds the pointer
to the table.
This patch is part 2 of 2 to reduce the number of command-line options
to amdfwtool. Part 1 added the --combo-capable option that helps
put the PSP directory pointer in the correct location. Part 2
removes the duplicated table, the support code, options, and updates
the usage text.
TEST=Build before/after images for grunt, bettong, apu2, and diff
hexdumps of the amdfw.rom files. Built/ran grunt with PSP_COMBO
defined as 1.
BUG=b:126691068
Change-Id: I542a7f5023137f30fbe00533452d4448117df487
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
There are effectively two unique sets of arguments for the utility,
causing one of two tables to be constructed. Both tables are
identical, however, and therefore the only practical difference is
the offset in the Embedded Firmware Structure which holds the pointer
to the table.
This patch is part 1 of 2 to reduce the number of command-line options
to amdfwtool. Create a new option that is used as an indicator for
which Embedded Firmware offset to use. Part 2 will be added once
makefiles no longer use the duplicated options.
This patch also adds two new options for fanless SMU firmware to be
used instead of the ones that will be removed in part 2.
TEST=Verify no difference in amdfw.rom for google/grunt before
and after the patch is applied
BUG=b:126691068
Change-Id: I249700c6addad1c0ecb495a406ffe7a022dd920b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The fletcher32 algorithm generates a sum over a range of 16-bit
WORDs. Change the function's interface to be more generic,
accepting a more intuitive size in BYTEs. Don't require the
caller to understand the nature of the algorithm and convert to
WORDs prior to calling.
TEST=Verify no difference in amdfw.rom for google/grunt before
and after the patch is applied
Change-Id: Iad70558347cbdb3c51bd598479ee4484219c0869
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31728
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the use of multiples of DWORDs with structures that
describe the Embedded Firmware Table, and PSP directory
headers & entries.
TEST=Verify no difference in amdfw.rom for google/grunt build
(Family 15h Models 70h-7Fh), amd/bettong (F15h 60h-6Fh),
and pcengines/apu2 (F16h 30h-3Fh). PSP_COMBO builds but
was not verified.
Change-Id: If05952d9282a0fa5a397984eaae671fb33f6134a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Correct an oversight in the utility that attempts to match up eligible
PSP directory table entries with blob names passed on the command
line. A 1:1 matchup of items shouldn't be assumed, so the i iterator
shouldn't be used to walk both lists.
This change has no effect on google/grunt (Family 15h Models 70h-7Fh),
but eliminates blank entries of all FF's on builds of amd/bettong
(F15h 60h-6Fh) and pcengines/apu2 (F16h 30h-3Fh). Removal of entries
also affects the checksum accordingly.
TEST=Build before/after images for grunt, bettong, apu2, and diff
hexdumps of the amdfw.rom files
Change-Id: I13e359d3cc6f5ce408bbf077feec3707ee2b3838
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31726
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Funtion fstat will return -1 if there's any error, 0 if successful.
Check that fstat return is equal to 0, print error message and exit if
not 0.
This fixes CIDs 1353018 and 1353020
BUG=b:72062481
TEST=Build no errors
Change-Id: I83284d9125c75a29471f213f88b9181d5edba2e6
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/23827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The function read() returns the number of bytes actually read. Program is
assuming it actually read the required number of bytes without checking.
This is wrong.
This fixes CIDs 1353019 and 1353021
BUG=b:72062481
TEST=Build no errors
Change-Id: I22d41b3de4eac5369f512f78b1b31cc1a250f787
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/23304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
File open function <open()> will return -1 if there's any error. Check that
the return is greater or equal to 0 before using fstat(). Print error message
and exit if there's an error.
This fixes CIDs 1353018, 1353020, 1353027 and 1353028
BUG=b:72062481
TEST=Build no errors
Change-Id: I77d6973d1ad1eadb93922866e618038045be5937
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/23303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The AMD firmware directory can go in a number of different locations.
This patch allows amdfwtool to write the directory correctly for those
different locations.
If the --location switch is not added to the command line, the default
location at ROM base address + 0x20000 is used as before.
BUG=b:65484600
TEST=Set PSP firmware location, compare amdfw.rom to previously built
version. Verify new location pointers.
Change-Id: Ief32e5e37d56088946b623d305c6e93bfd6abeaf
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Move the images around in the image stitching. This addresses
an issue found with PSP firmware loading on the Google Kahlee
mainboard.
Note firmware1 must come before firmware2 in the image or
the PSP will not allow APU to execute.
Change-Id: I85963fa93d6efd707cedfbc04b92d302ad5de3b1
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19170
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The Stoney Ridge program has OPNs that are considered fanless. These
APUs are strapped to search for unique SMU firmware, indicated by
Type[8]=1 in the directory table entry.
Add new options to amdfwtool and include the blobs in the build with
the appropriate bit set in the Type encoding.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 8df0d6847c39bb021271983018ac6f448f9ff9da)
Change-Id: I4b80ccf8fd9644f9a9d300e6c67aed9834a2c7a7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18991
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Return an error if the specified file could not be opened. To do this
cleanly, the return value was added.
- Since there's now a unified return value, use it where it makes sense.
- Don't return an error from --help. If you've asked for usage, it's
not an error.
Change-Id: I7c712d1e1927c2d4957b044b87ad26475b7a0e3b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17324
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Various fixes for clang warnings:
warning: arithmetic on a pointer to void is a GNU extension
- change *rom from void* to char* and cast back to void* as needed
warning: implicit conversion changes signedness
- In ALIGN macro, pass in value as unsigned
warning: no previous prototype for function
- Change functions to static
warning: no previous extern declaration for non-static variable
- Change global variables to static
warning: comparison of integers of different signs
- Make loop variable 'i' unsigned
warning: variable 'output' may be uninitialized
- Make sure an output filename was specified
warning: implicit conversion loses integer precision
- cast fd_stat.st_size to the appropriate type
Change-Id: I0134a79c00938e121e63b52fd63bd502f4cb9e99
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17322
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Previously, the ROM size was passed into amdfwtool solely as a #define,
meaning that all boards built with the tool would assume the same size
ROM. This became a problem when the default rom for abuild was updated
to be a board with a 256KB ROM.
The temporary solution was to build amdfwtool individually for each
board that needed it. This replaces that workaround by allowing the
ROM size to be passed in as a command line parameter.
- Add the -f | --flashsize option to accept a hex value for the ROM
size.
- Add checks to make sure the ROM size supplied is large enough.
- Because the ROM size is not hardcoded, it needs to be passed to
various functions.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I0ca69cbba54797e0387a6e85935767b4136ef615
Reviewed-on: https://review.coreboot.org/17321
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Double the space for psp2dir to 0x200.
Based on advice from AMD, increase the region containing
the signature to 4K.
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit e03a9402711c3a210816d0aa32865491a0523639)
Change-Id: If60132f913928bab0c2fe4aacedf342080929599
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17148
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
Original-Signed-off-by: Marc Jones <marcj303@gmail.com>
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit 482b65c219b932fd374f2ac469a023db219a66de)
Change-Id: I0a24a0aa4c7d9f4a8cc3ee9b7da60ea7704e6f17
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17147
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
Make the PSP2 smufirmware2 name unique so the command-line option
gets picked up.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: <marcj303@gmail.com>
(cherry picked from commit 98cf3880797f72aeb7169c3f8718a10092af9624)
Change-Id: I5430cf8b81fb03c95e6ee9d7e53455e6224256ff
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17146
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
1. Change the function which integrated one firmware, to the function
which pushes the whole group. Use fw_table as a parameter instead
of using the global table name.
2. Let PSP2 and PSP1 not dependent on the other. It turns out PSP2
can exist without PSP1. For some APU, the PSP directory has to be
put in PSP2 field (ROMSIG 0x14).
3. Reserve 32 more bytes in PSP2 header. It is defined by spec. It
is tested, and it is true.
These above changes are overlapping, hard to split them. Sorry.
Change-Id: I834630d9596d7fb941e2cad5d00ac3af04a537b5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13808
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
If we only need to "combo" two PSP directories into one image,
we can put first address in romsig 0x10 and second one in
romsig 0x14.
If we really need to put three, the 0x14 is the combo directory
which points to multiple level-2 PSP directories.
I guess that two PSP can also use combo directory, with only
one level-2 directory. But nobody seems to do that.
Change-Id: Ic450a846bc04db90a75cd417b6d7104fe2a5b177
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13739
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
I didn't go back through the development guide for this.
But based on test, if the empty entry is filled as 0xFFFFFFFF,
instead of 0, the USB3 port can not be used.
Leave the entries of PSP and PSP2 as 0xFFFFFFFF to be compliant
with the case before the amdfwtool is used.
Change-Id: Icd5f9891e541279dbd551bbceaf091488d22bfef
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/12665
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
PSP2 is for Combo BIOS, which is the idea that one image supports 2
kinds of APU.
The PSP2 feature is for the future, not for current products.
The newest document about PSP2 is not available. I made it from the
draft code I made when I was in AMD.
Change-Id: I65328db197c02ee67f3e99faf4ab8acabd339657
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/12474
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Combine all needed AMD firmware into one single firmware, which going to
be added as one single CBFS module.
Change-Id: Ib044098c1837592b8f7e9c6a7da4ba3a32117e25
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12419
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Marshall Dawson