Add the flags used by the Nvidia makefile and use HOSTCC
to build cbootimage. Note that adding -g makes the BCT
very large, so leave that flag out.
Change-Id: I4431efffdfdcbd030665b26f5b799352e38d1f95
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8411
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On x86, change the type of the address parameter in
read8()/read16/read32()/write8()/write16()/write32() to be a
pointer, instead of unsigned long.
Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7784
Tested-by: build bot (Jenkins)
The default linking behavior of ramstage was changed in commit
* 8f99378 ARMv7/Exynos: Fix memory location assumptions
However, that commit failed to address the issue of maintaining
linking behavior on non-Exynos chips. As a result we ended up
linking ramstage at address 0, which is outside of SDRAM.
Explicitly link ramstage at SDRAM base for A10. This patch does not
address the issue on other chips that were broken by commit 8f99378.
Change-Id: I90fa41d3eabf110b5ab24c31b78ac6d0474e4083
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8443
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
PCIe root ports on devices 0:15.0 to 0:15.3 should at first all
appear visible in hardware. The real configuration will be done by
vendorcode once we call sb_Before_Pci_Init().
Change-Id: I01a46c630aa6d55a94af45da6b78c97df7553e4f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8387
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This has nothing to do with SATA controller. We only need to
fill the table with defaults before we parse devicetree for
changes to device configuration.
Change-Id: Ic4b28b5992ec9bfdf252f61b1c86b0162243cc95
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8386
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
If devicetree.cb has GPP port off, really disable it before even
trying to do link training.
Change-Id: I810945da28d86768e88249dc4d29a50ad9f9959b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8385
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
A set of pins can be configured for GPIO or (parallel) PCI bridge use.
When requested configuration is 0:14.4 enabled, register programming
must be done before attempting to enumerate devices behind the bridge.
When requested configuration is 0:14.4 disabled, we must not even
temporarily enable pins for PCI use to avoid spurious GPIO state changes.
As our PCI subsystem currently does not configure visible PCI bridges
that are marked disabled, we cannot mark 0:14.4 disabled just yet but
need to handle pcengines/apu1 as a special case.
Drop related dead code.
Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8329
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
These sb800_enable() messages without newline mess up the log.
Change-Id: I1689b68702e08e2a287083835f310f52f495c451
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8384
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Kconfig variable is not implemented.
Change-Id: I546a1001847e7b1002f96baf49ed3301852a6894
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8345
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Keep the slower HyperTransport configuration for a possible reference
in fam15 boards.
Change-Id: Ifcdedc6385fec80f7d02c55c2aac10e5e2429a18
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8344
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Probing is done by reading the ID register and comparing it to a known
value. When there is a mismatch, print an error.
Change-Id: I36fb1fe9b56e97660556dcb27be25bfe5129ad73
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8433
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The actual key values were not added in commit 17ace8255.
TEST: amd/lamar shows the correct result.
Change-Id: I8f20e3d0ce83dd87b6c233ee98c3e77a6b7c1b03
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8375
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: Marc Jones <marc.jones@se-eng.com>
This combines the Avalon and Bolton tables of text descriptions
of the IRQ assignments. It also corrects the text string for
the SD controller on Bolton.
Test: This was verified on amd/lamar.
Change-Id: Ibc74641eb4e1f7581f26d260ba3d33201bcbf5e7
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8374
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Verstage isn't included yet, but we need to have
the Kconfig option for toolchain.inc to pass.
Change-Id: I7fae73cd3b77fd347398221489caf745274701eb
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8409
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
git submodules have some surprising behaviour, and we make full use
of it. Start building a canonical resource for that so developers
can spend their time on better things than on fighting git.
Change-Id: I5aa721e9b0acb2912a057858fd23a1d59d845ed1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8371
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Add two macros to gpio.h which allow to setup 20K
pull-up or pull-down resistor for a given GPIO.
Change-Id: Ie3bc4d40df588ed682cc692e2a80527b9e62a483
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8402
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Two source files were accidently marked executable. Switch them back to
mode 644 (rw-r---r--)
Change-Id: Ic96f6e5e9a05cbffb65cdfb627023d04d3866dc9
Signed-off-by: Stefan Reinauer <stepan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8426
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Martin Roth <gaumless@gmail.com>
BUG=none
BRANCH=none
TEST=none
Change-Id: I56f357db6d37120772a03a1f7f84ce2a5b5620e9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/241855
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Commit-Queue: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/8396
Tested-by: build bot (Jenkins)
If one needs raw binary files, .bin extension cannot
be used due to settings in .gitignore. This patch
allows to use .hex files. To avoid lint checks on these
files, exclude the .hex extension from the test.
Change-Id: I4b503229d63694c48cce12ca8cd33ea58172af01
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8403
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
From git's point of view submodules are a weird third thing between file
and directory. Avoid trying to apply file handling on a directory.
Change-Id: Ibbc9c28e1657d96413c5fb08705d30e25171254d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8372
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
SeaVGABIOS supports both the coreboot linear framebuffer and native EGA
text mode. To use SeaBIOS interactively on standard VGA hardware a VBIOS
is needed; SeaVGABIOS is one such option.
TEST: Booted KFSN4-DRE with XGI Volari Z9s and SeaVGABIOS. Was able to
interact with SeaBIOS and comboot menu, then booted Linux successfully.
VGA display was continuously usable from power on to Linux login.
Change-Id: Id4bd4cb5cece9114457633832c5f0e5280c02b47
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8368
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Change-Id: I92e6e7f1292f66642aa0336064a4eccba104dd08
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5101
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
The core count identification code in the PowerNow! _PSS
ACPI object generation code was incorrectly copied from the
model_fxx code. This code has been rewritten to properly
return the number of cores installed in the system.
Change-Id: I19567486f2de9dc2c43970addf4d91fa3d233a99
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8421
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
The PCI id defaults to 1106,3230 -> via chrome 9 ...
Tested on the board.
Change-Id: I5ad91faec9c97f34c8ca48eee9198237e9ea8336
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8177
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
microcode updates are extracted from: www.amd64.org/microcode.html
Mircocode versions of 1020h and 1022h are more recent in coreboot
than inside the AMD archive.
Change-Id: I9f52accc1ebc7057890a769a059048e9982109d2
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8354
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Carefully staging to enable checkpatch for coreboot contributions.
The biggest offender of the rules enforced by checkpatch I have found so
far is ... Oh, you guessed it? It's checkpatch itself.
Change-Id: Iaacbcd52c3bc22b083a24127a3ea17a7cc706245
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8417
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This resolves an issue on Shanghai dual CPU configurations where
the APs on node 0 would not start. Single CPU configurations are
unaffected by this issue.
TEST: Booted KFSN4-DRE with dual Opteron 8389 CPUs and verified
proper BSP/AP start and microcode patch levels.
Change-Id: I0f5d4e0e356c6bd64e324b4399ef43b400ecab0c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8397
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Improve documentation of lock down MSRs in finalize().
Most of these aren't documented in public MSRs.
Change-Id: I4fc47bb9b71bdd7907aae65fc18b419a17ae8547
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8294
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Peter Stuge <peter@stuge.se>
It doesn't provide any useful information.
Change-Id: I13e68d443bbcadea45b8fbcc262ceb9deb3e2e61
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8380
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Peter Stuge <peter@stuge.se>
There is no auto-detection for AGP type and we have no hardware that
selects this. Furthermore, we treat AGP bridges just like PCI bridges,
there is no optimisation for higher bandwidth.
Change-Id: I4fe87c83411643cb9b8d3216f2af07bf098174d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8367
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
By adding a description to ME_PATH it becomes visible
and editable in menuconfig.
Change-Id: I8c2f6a30c10f16b19f3667263db02c93688c9f8f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8398
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The original firmware has a 2 MiB BIOS region in both 4 MiB and 8 MiB
flash variants. Let's allow using the whole region instead of the
gm45 default of 1 MiB.
Change-Id: I2d8a04bcb992bf2e8e15890a5c6719810b1cf405
Signed-off-by: Michał Masłowski <mtjm@mtjm.eu>
Reviewed-on: http://review.coreboot.org/8392
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Fix a mistake that led to an invalid 0ms latency in the automatically
generated PowerNow! ACPI _PSS objects.
TEST: Booted FreeBSD and Linux and verified correct latency values.
Found-by: Coverity Scan
Change-Id: I03cecab694708136dc555ca2af7ee9a0bf9be5af
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8376
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Because the pointer to the FSP HOB list is now being saved, we can
use that to find the top of usable memory. This eliminates the need
to hardcode the size of the FSP reserved memory area.
Tested on minnowboard max for baytrail.
The HOB structure used does not seem to be present for the rangeley
or ivybridge/pantherpoint FSPs. At the very least, the GUID is not
documented in the integration guides.
Change-Id: I643e57655f55bfada60075b55aad2ce010ec4f67
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8308
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
The "used" attribute was added in commit 27cf2472 which caused these
warnings to start appearing when using the standard coreboot GCC
toolchain:
{standard input}: Assembler messages:
{standard input}:96: Warning: ignoring changed section type for .car.global_data
{standard input}:96: Warning: ignoring changed section attributes for
.car.global_data
The # at the end of the section name causes the assembler to
ignore everything following the name. I verified that the resulting
binaries are the same with and without the #.
Change-Id: Iaac8042533842ed887f33895f083b613a18f496a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8301
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Now that BROKEN_CAR_MIGRATE is fixed we can stash these in CAR.
Change-Id: I49c31b91f34d415778797d08a347a51dbef797e3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8024
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
The port is based on the x230 / t530.
Tested - is in active use.
Change-Id: Ic5ccfe70343e8aef3465690edce9cdebf153a44d
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8359
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
cmos_init() had layers of preprocessor directives, which resulted in
a complete mess. Refactor it to make use of the IS_ENABLED() macro.
This improves readability significantly.
One of the changes is to remove in inline stub declaration of
(get|set)_option. Although that provided the ability for the compiler
to optimize out code when USE_OPTION_TABLE is not selected, there is
no evidence that such savings are measureable.
Change-Id: I07f00084d809adbb55031b2079f71136ade3028e
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8306
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This macro is controversial for arches where the bits are numbered
MSb first, though we don't support such an arch. We've seen this macro
creep into our tree in different places, so provide it in one place.
Change-Id: I86cd8a16420f34ef31b615aec4e0f7bd3191ca35
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8280
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
TEST: Booted KFSN4-DRE with on-board XGI Volari Z9s
Initial text from coreboot appeared, and the Linux
console was displayed immediately at the start of
kernel initialization. After boot was complete
the text mode console continued to behave normally.
SeaBIOS does not currently make use of the legacy
VGA text-mode display.
Change-Id: I2177a1d00e6f07db661dd99fe0184e2c228404d1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8360
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The indentations of #define are not consistent in chip.h. Update to make
all #define indentations being aligned and put them after the variable
declaration.
Change-Id: I37550acac18bac3efddb580ef6b956be0e2b357a
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/8333
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Tested-by: build bot (Jenkins)
1) Save the pointer to the FSP HOB list to low memory at address 0x614.
This is the same location as CBMEM_RESUME_BACKUP - the two aren't used
in the same platform, so overlapping should be OK. I didn't see any
documentation that actually said that this location was free to use, and
didn't need to be restored after use in S3 resume, but it looks like
the DOS boot vector gets loaded juat above this location, so it SHOULD
be ok. The alternative is to copy the memory out and store it in cbmem
until we're ready to restore it.
2) When a request for the pointer to a CAR variable comes in, pass back
the location inside the FSP hob structure.
3) Skip the memcopy of the CAR Data. The CAR variables do not
get transitioned back into cbmem, but used out of the HOB structure.
4) Remove the BROKEN_CAR_MIGRATE Kconfig option from the FSP platform.
Change-Id: Iaf566dce1b41a3bcb17e4134877f68262b5e113f
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8196
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Marc Jones