This change uses the following information to determine the
appropriate S0ix states to enable as per PDG document: 607872
for TGL UP3 UP Rev2p2 (section 10.13):
1. SoC - UP3 v/s UP4
2. H/W design - external phy gating, external clk gating, external bypass
3. Devices enabled at runtime - CNVi, ISH
In some cases, it is recommended to use a shallower state for
S0ix even if the higher state can be achieved (e.g. with external
gating not enabled). This recommendation is because the shallower
state is determined to provide better power savings as per the
above document. Deepest state expected on tigerlake up3 based
platforms is S0i3.2.
BUG=b:177821896
TEST=Build coreboot for volteer. Verify that deepest
S0ix substate that is enabled is S0i3.1
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Change-Id: I5f2ac8b72d0c9b05bc02c092188d0c742cc83af9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49766
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix the issue that return value "r" in line 534 will get overwritten
problem.
BUG=CID 1445995
TEST=Build sucessful and boot up in QEMU
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Icf760b142cfecfed7c929c15ad190ac74df027b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Francois Toguo Fotso <francois.toguo.fotso@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Configure Port C VREF according to the settings in the EEPROM.
Change-Id: I5b4f0d91fc30c6b585434b9450544281f4411ff4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50396
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Implement `mainboard_azalia_program_runtime_verbs` to configure the
Realtek ALC888 codec according to the settings in the EEPROM. The
encoding of the `internal_audio_connection` field is:
0: Disabled
1: Front HP out
2: Internal speaker
Change-Id: I5e0013217838888977aaa9259e0cfb78c82f719f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
On some mainboards, codec configuration depends on settings that are
only known at runtime, which is impossible to specify using one verb
table. Add an optional `mainboard_azalia_program_runtime_verbs` hook
where mainboards can program runtime-dependent codec verbs.
Change-Id: I7efeba5c26051aeb5061cce191ace08c304a6c70
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
On some boards, Azalia configuration depends on config settings that are
not known at compile-time. Expose a function to program a verb table, to
be used in subsequent commits.
Change-Id: Ie9607f6e733df66f0ca26a4bb70e0864ce1d4512
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The type of `verb_size` is unsigned, thus use `%u` to print its value.
Change-Id: I2b353b940e881dc8b5f0b902509d97d89c997a70
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Comparing against MRC, looks like the values for TA3 and TA4 are
backwards. All of them. Thus, correct the tables accordingly.
Tested on Acer G43T-AM3, DDR3-1066 and CL = 8 now works.
Change-Id: I2c99502b8f105c77098c888b024a4c3c2c8877d4
Tested-by: Michael Büchler <michael.buechler@posteo.net>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49388
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Büchler <michael.buechler@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The reset GPIOs are already configured in bootblock.
Drop the unused ramstage code.
Change-Id: Ic99fcae2a3f00be7eebd7be618df838522dac69f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
With a new HW revision of this board, the connection of the external RTC
RX6110SA was changed from I2C bus 0 to I2C bus 3.
Change-Id: I10dd44949973ea490b3c7e4ad83d56ce2e566adf
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Triggering SMI is not part of the semantics of global_smi_enable(), so
move it to the post_mp_init handler. Even without the !acpi_is_wakeup_s3
check we don't get PSP warnings/errors during resume, so we can drop the
workaround introduced in commit 5dbe45e0f5
in this patch.
Change-Id: Id0e7723c2bb9811f80fe36c38199a01445dc1d7d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42987
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 75f6ab35ff.
Reason for revert: The 5.4 Linux kernel is not configured for AMDI0030. This causes an issue where the WP pin is not recognized.
BUG=b:179320024
TEST=WP pin shows up properly in crossystem after reverting this change.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I0850fd085b5ee70522752633900f69d4d3732321
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50052
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Recommendation from SOC to config IQ=8 for U3 port0,
vboost for all U3 ports for passing ESD pin test.
BUG=b:175192931
BRANCH=zork
TEST=1. emerge-zork coreboot
2. run U3 SI/ESD pin test => pass
Change-Id: I42a94e03fb6f8230d4356d16b8e0d2164bc61e3f
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
This is a copy/paste of picasso with a few things removed. With this
change we can jump into depthcharge.
Allocated resources:
PCI: 00:00.0 resource base 0 size a0000 align 0 gran 0 limit 0 flags e0004200 index 0
PCI: 00:00.0 resource base a0000 size 20000 align 0 gran 0 limit 0 flags f0000200 index 1
PCI: 00:00.0 resource base c0000 size 40000 align 0 gran 0 limit 0 flags f0004200 index 2
PCI: 00:00.0 resource base 100000 size 1f00000 align 0 gran 0 limit 0 flags e0004200 index 3
PCI: 00:00.0 resource base 2000000 size 1c0000 align 0 gran 0 limit 0 flags f0004200 index 4
PCI: 00:00.0 resource base 21c0000 size cde40000 align 0 gran 0 limit 0 flags e0004200 index 5
PCI: 00:00.0 resource base f8000000 size 4000000 align 0 gran 0 limit 0 flags f0000200 index c0010058
PCI: 00:00.0 resource base 100000000 size 30e340000 align 0 gran 0 limit 0 flags e0004200 index 6
PCI: 00:00.0 resource base 40e340000 size cc0000 align 0 gran 0 limit 0 flags f0004200 index 7
PCI: 00:00.0 resource base 40f000000 size 1000000 align 0 gran 0 limit 0 flags f0004200 index 8
PCI: 00:00.0 resource base 410000000 size 20000000 align 0 gran 0 limit 0 flags f0004200 index 9
PCI: 00:00.0 resource base cfffe000 size 2000 align 0 gran 0 limit 0 flags f0004200 index a
PCI: 00:00.0 resource base ceffe000 size 1000000 align 0 gran 0 limit 0 flags f0004200 index b
TEST=Boot majolica and see depthcharge finally loading:
Starting depthcharge on MAJOLICA...
new_rt5682_codec: chip = 0x1A
Looking for NVMe Controller 0x3004cac8 @ 00:01:07
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I52682ec2a06c7e219c221648f241e18e26a9358e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50339
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change allows VBOOT to build when the mainboard hasn't implemented
any of the VBOOT functions yet.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I42ca8f0dba9fd4a868bc7b636e4ed04cbf8dfab0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50341
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The same functionality is needed on Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I40f9d2fe7d144e94369a417225bcca0a299d1f45
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
No PCI or PNP functions are used in here.
TEST=Timeless build results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I577e2ecdc59dbd09e739ae800cbe021168a34812
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50399
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
No PCI or PNP functions are used in here.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I46851656db1f1866a82f06ceab67c93019cc6af1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
ACPI S3 is a global state and it is no longer needed to
pass it as a parameter.
Change-Id: Id0639a47ea65c210b9a79e6ca89cee819e7769b1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Hide the detail of allocation from cbmem from the FSP.
Loading of a BMP logo file from CBFS is not tied to FSP
version and we do not need two copies of the code, move
it under lib/.
Change-Id: I909f2771af534993cf8ba99ff0acd0bbd2c78f04
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It's not obvious how to set specific byte of a multi-byte field in the
set file. Add an example (and a template) for setting MAC address.
Change-Id: Iea983071682ffebd61757497d43c70cc8214043d
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Swift Geek (Sebastian Grzywna) <swiftgeek@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Shreesh Chhabbi