Allow to write multiple phdrs, one for each non-consecutive section
of the ELF.
Previously it only worked for ELFs contaning a single
program header.
Change-Id: If6f95e999373a0cab4414b811e8ced4c93c67c30
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15215
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Checksum is calculated by using 2s complement method. 8-bit sum of the
entire subpart directory from first byte of header to last byte of last
partition directory entry.
BUG=chrome-os-partner:53508
Change-Id: I991d79dfdb5331ab732bf0d71cf8223d63426fa8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15200
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. The checksum method that was documented is not correct. So, no use
filling in a value based on wrong calculations. This can be added back
once updated information is available.
2. Checksum does not seem to affect the booting up of SoC. So, fill in 0
for now.
Change-Id: I0e49ac8e0e04abb6d7c9be70323612bdef309975
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15145
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Update pack and header order and mark the entries as mandatory and
recommended w.r.t. ordering (mandatory = essential for booting,
recommended = okay to change, but this config is tested and known to work).
Change-Id: Ia089bdaa0703de830bb9553130caf91a3665d2c4
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15144
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Scan the boot block when building it with C_ENVIRONMENT_BOOTBLOCK
selected.
TEST=Build and run with Galileo Gen2
Change-Id: I922f761c31e95efde0975d8572c47084b91b2879
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15130
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The current implementation from Vladimir simply dumps 1 MB of memory
contents starting at the base address of the second PCI device (which
most likely is the VGA controller on Intel systems). This locks up a
number of different systems, e.g. my Ibex Peak-based T410s.
This patch documents the issue and stops dumping the graphics registers
for the -a/--all parameter.
Change-Id: I581bdc63db60afaf4792bc11fbeed73aab57f63a
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Adds a label for each tool included in the cbfstool package
in order to build them more easily through Make.
Change-Id: Id1e5164240cd12d22cba18d7cc4571fbadad38af
Signed-off-by: Antonello Dettori <dettori.an@gmail.com>
Reviewed-on: https://review.coreboot.org/15075
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds the ISA bridge device id for the Intel C160/X99 series
chipset to the intelmetool.
Change-Id: I2e7db0fe1692985ebb167b9a44ab412a45a9f3bd
Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/15053
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Build the <board>_checklist.html file which contains a checklist table
for each stage of coreboot. This processing builds a set of implemented
(done) routines which are marked green in the table. The remaining
required routines (work-to-do) are marked red in the table and the
optional routines are marked yellow in the table. The table heading
for each stage contains a completion percentage in terms of count of
routines (done .vs. required).
Add some Kconfig values:
* CREATE_BOARD_CHECKLIST - When selected creates the checklist file
* MAKE_CHECKLIST_PUBLIC - Copies the checklist file into the
Documenation directory
* CHECKLIST_DATA_FILE_LOCATION - Location of the checklist data files:
* <stage>_complete.dat - Lists all of the weak routines
* <stage>_optional.dat - Lists weak routines which may be optionally
implemented
TEST=Build with Galileo Gen2.
Change-Id: Ie056f8bb6d45ff7f3bc6390b5630b5063f54c527
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15011
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This avoids re-declaring common macros like ARRAY_SIZE, MIN, MAX and
ALIGN. Also removes the issues around including both files in any
tool.
Also, fix comparison error in various files by replacing int with
size_t.
Change-Id: I06c763e5dd1bec97e8335499468bbdb016eb28e5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14978
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Since fit.c is the only caller of this function move it out of common.c
and into fit.c.
Change-Id: I64cc31a6d89ee425c5b07745ea5ca9437e2f3fcf
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14949
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
If '-b' isn't passed when adding an FSP file type to CBFS allow
the currently linked address to be used. i.e. don't relocate the
FSP module and just add it to CBFS.
Change-Id: I61fefd962ca9cf8aff7a4ca2bea52341ab41d67b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14839
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add support for a basic generic device in the devicetree to bind to a
device that does not have a specific bus, but may need to be described
in tables for the operating system. For instance some chips may have
various GPIO connections that need described but do not fall under any
other device.
In order to support this export the basic 'scan_static_bus()' that can
be used in a device_operations->scan_bus() method to scan for the generic
devices.
It has been possible to get a semi-generic device by using a fake PNP
device, but that isn't really appropriate for many devices.
Also Re-generate the shipped files for sconfig. Use flex 2.6.0 to avoid
everything being rewritten. Clean up the local paths that leak into the
generated configs.
Change-Id: If45a5b18825bdb2cf1e4ba4297ee426cbd1678e3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14789
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Use the second token for an i2c device entry in devicetree.cb to
indicate if it should use 10-bit addressing or 7-bit. The default if
not provided is to use 7-bit addressing, but it can be changed to
10-bit addressing with the ".1" suffix. For example:
chip drivers/i2c/generic
device i2c 3a.1 on end
end
Change-Id: I1d81a7e154fbc040def4d99ad07966fac242a472
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14788
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Currently you cannot assign a string to a register in devicetree because
the quotes are removed when parsing and the literal is assigned directly.
Add a parse option for two double-quotation marks to indicate a string
and return a quoted literal that can be assigned to a register with a
'const char *' type.
Example:
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "uid" = "1"
device i2c 15 on end
end
Change-Id: I621cde1f7547494a8035fbbab771f29522da1687
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14787
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Long options can be useful when writing examples and documentation
as they are more expressive and obvious to the reader.
Change-Id: I39496765ba1f15ccc2ffe1ad730f0f95702f82b8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14736
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
If the option is not provided, ssh uses the default port for the host,
which is usually 22, but may be overridden in the user's SSH
configuration.
Change-Id: I303e9aeae16bd73a96c5e6d54f8e39482613db28
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14522
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
In some configurations, "git push <remote>" (without a branch name)
refuses to do anything.
Change-Id: I23a401b39dd851e9723676586c7f29afa111b49d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14539
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
- manpage
- usage message
- new warning message if -S is used on an unsupported chipset
Change-Id: I1acaa5f4232b65244ec00fd22ec7460d9cc387f1
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14624
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
FSP 2.0 uses the same relocate logic as FSP 1.1. Thus, rename
fsp1_1_relocate to more generic fsp_component_relocate that can be
used by cbfstool to relocate either FSP 1.1 or FSP 2.0
components. Allow FSP1.1 driver to still call fsp1_1_relocate which
acts as a wrapper for fsp_component_relocate.
Change-Id: I14a6efde4d86a340663422aff5ee82175362d1b0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14749
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Currently, convert_fsp assumes that the component is always XIP. This
is no longer true with FSP 2.0 and Apollolake platform. Thus, add the
option -y|--xip for FSP which will allow the caller to mention whether
the FSP component being added is XIP or not. Add this option to
Makefiles of current FSP drivers (fsp1_0 and fsp1_1).
Change-Id: I1e41d0902bb32afaf116bb457dd9265a5bcd8779
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14748
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
(1) Added following new function.
cbfs_locate_file_in_region - to locate (and mmap) a file in a flash
region
This function is used to look for MMA blobs in "COREBOOT" cbfs region
(2) mma_setup_test.sh would write to "COREBOOT" region.
(3) changes in mma_automated_test.sh. Few MMA tests need system to
be COLD rebooted before test can start. mma_automated_test.sh would
do COLD reboot after each test, and so i would sync the filesystem
before doing COLD reboot.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB4). Able to locate MMA files in CBFS
Not tested on Glados.
Change-Id: I8338a46d8591d16183e51917782f052fa78c4167
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1e418dfffd8a7fe590f9db771d2f0b01a44afbb4
Original-Change-Id: I402f84f5c46720710704dfd32b9319c73c412e47
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331682
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/14125
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
mma_automated_test.sh takes a config file (/usr/local/mma/tests) as
input and executes all tests mentioned in the config file.
format of the config file is one or more lines mentioned below.
<MMA test name> <MMA test param> <#count>
e.g. consider following config file.
Margin1D.efi Margin1DRxVrefConfig.bin 4
RMT.efi RMTConfig.bin 1
MarginMapper.efi ScoreTxVref-TxDqDelayConfigCh1.bin 2
Margin2D.efi Margin2D_Cmd_Ch0_D1_R0_Config.bin 3
This will execute Margin1D.efi MMA test 4 times with
Margin1DRxVrefConfig.bin param and results will be stored
in DUT under /usr/local/mma/results_<date-time-stamp>
with Margin1D_Margin1DRxVrefConfig_1.bin to
Margin1D_Margin1DRxVrefConfig_4.bin name. Subsequently all tests
will be executed and results will be stored.
/etc/init/mma.conf invokes mma_automated_test.sh when DUT
starts. And if valid test config is preset at /usr/local/mma/tests,
mma_automated_test.sh will continue executing the tests. Each time
DUT will be rebooted and next test in sequence will be executed.
Overall follow these steps to start MMA.
(1) create /usr/local/mma/tests file with the syntax mentioned above.
(2) either reboot the DUT (mma.conf will be called at each boot time,
which would run the mma_automated_test.sh) or execute "start mma"
command (to save a reboot cycle.)
(3) all test results can be found under
/usr/local/mma/results_<date-time-stamp> where <date-time-stamp> is
YY_MM_DD_HH_mm format (YEAR_MONTH_DAY_HOUR_MINUTE) when you started
the mma tests.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB3). MMA automation tests executes
and results get saved.
Change-Id: I6805fdb95b7ff919f9c8e967b748e4893a3f9889
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 68c0a531ba3fc335b92b17002e75412195b778c4
Original-Change-Id: I92db7ca47e1e3e581c3fbb413f11e2c3e6d19b6b
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313180
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/12928
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The IPQ40xx Primary Boot Loader (PBL, i.e. Boot-ROM) expects an
ELF in the boot medium to load and boot. These scripts combine
the Secondary Boot Loader (SBL) and Coreboot ELF to an image as
expected by the PBL.
BUG=chrome-os-partner:49249
TEST=Able to boot and reach depthcharge
BRANCH=none
Change-Id: I5d02b7f1f58bb23d81a3e19fb9b78f3a999b89f3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 819c7f2a810ca2880718ba14f2451f06eef4d98b
Original-Change-Id: I017207b2d4108de150853f421aa7bcfd0e12e9a4
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/340181
Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14680
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
and re-generate _shipped files
Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14733
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This converts the argument parsing to allow us to add longopts
using GNU getopt(1).
Shortopts should be reserved for general parameters. Longopts can be
used to tweak specific behaviors. For example, we might wish to add
options to set SSH port, timeout, and authentication parameters
with "--ssh-port", "--ssh-timeout", "--ssh-identity", etc.
Change-Id: Idee5579079dbbb7296ad98f5d6025b01aab55452
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14523
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
A previous patch [1] to make top-aligned addresses work within per
fmap regions caused a significant regression in the semantics of
adding programs that need to be execute-in-place (XIP) on x86
systems. Correct the regression by providing new function,
convert_to_from_absolute_top_aligned(), which top aligns against
the entire boot media.
[1] 9731119b cbfstool: make top-aligned address work per-region
Change-Id: I3b685abadcfc76dab8846eec21e9114a23577578
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14608
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update gdb to 7.11 and expat to 2.1.1
riscv64-elf is still broken.
Change-Id: Id7605f4274fcb15f9c3e366f5c492328f70f7956
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14461
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
New tools:
* mpfr 3.1.4
* binutils 2.26
* gcc 5.3.0
* llvm/clang 3.8.0
Patch changes:
* binutils-2.25_fix-aarch64.patch: fixed in 2.26
* binutils-2.25_host-clang.patch: the positions of header file
includes have been adjusted
* binutils-2.25_no-bfd-doc.patch: update to 2.26
* binutils-2.25_riscv.patch: update from riscv-gnu-toolchain
* gcc-5.2.0_elf_biarch.patch: update to 5.3.0
* gcc-5.2.0_gnat.patch: update to 5.3.0
* gcc-5.2.0_libgcc.patch: update to 5.3.0
* gcc-5.2.0_nds32.patch: update to 5.3.0
* gcc-5.2.0_riscv.patch: update from riscv-gnu-toolchain
* cfe-3.7.1.src_frontend.patch: update to 3.8.0
In the latest code of riscv-gnu-toolchain project, the patch for
{binutils,gcc}/config.sub has been removed, and the target is renamed
as riscv32 and riscv64. The `riscv' to `riscv64' change in xcompile is
in another commit.
Test results:
All GCC and LLVM/clang toolchain build successfully.
x86,arm: qemu boots
power8: firmware fails to boot
aarch64,mips: not tested
riscv: firmware fails to build with new binutils
clang: firmware fails to boot
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I42ce89c29263d768d161c28199994f17d0389633
Reviewed-on: https://review.coreboot.org/14227
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Always set HOSTCFLAGS to the flags GMP was built with, defaulting to
"-Os" if it isn't built yet. Previously, if GMP was already built or
not even in the list of packages to be built, this was silently skipped
and other packages were built with empty HOSTCFLAGS.
Change-Id: I29b2ea75283410a6cea60dc1c92b87573aebfb34
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13550
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The xz archives are slightly smaller than the bz2 archives for gmp
and mpfr, so use them instead to speed up the download.
Change-Id: I3729455cdbc46e5a0cff119ecca97b0e00c3d402
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14462
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Both packages are not using the target architecture. Drop it,
and remove them from package_uses_targetarch
Change-Id: I58efde4cb7cc39e7e3c31527eb7682e318928100
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14464
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
By exporting base and offset of CBFS-formatted fmap regions, the code
can use these when it's not prudent to do a runtime lookup.
Change-Id: I20523b5cea68880af4cb1fcea4b37bb8ac2a23db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14571
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Just because an 'as' with a certain prefix is available does not guarantee
that a 'gcc' with the same prefix is available as well.
Without a check detect_compiler_runtime() would try to execute an
unavailable binary and print something like this:
.../xcompile: line 218: arm-linux-gnueabi-gcc: command not found
Change-Id: Icbadfeb2860152f7cf7696a9122521d0d881f3aa
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14563
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Gitweb isn't online anymore, so fix a few broken links.
Change-Id: I7fdfcb60f83a718c9a5b6c7f7ef4df9206451d95
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14559
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Test results under 16 days old display with an incorrect background color
due to the leading zero not being preset in the associated HTML color code.
Add the leading zero where needed to generate a valid HTML color code.
Change-Id: I0dfe29ec1afc409a4908073922ac31a4091f0f1f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14514
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
A major issue with the board-status Wiki page is that it shows all
test results equally regardless of age. As a test result ages it
becomes more likely that the board no longer works peroperly under
coreboot due to code churn.
Visually indicate board-test status "at a glance" by smoothly fading
the background color of the test result from green to yellow as the
test result ages. This patch sets the full yellow transition to 255
days after test for programming convenience, however the number of
days required to fully "stale" a test result could be modified
relatively easily.
Change-Id: I5a076a6cc17d53fda8e4681e38074fc1f46c0e12
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14457
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
This is in response to issue #28: board-status should reject duplicate
uploads.
Change-Id: Iff99be154b35e8c0f9f05f9470d1c2dcff8510b8
Signed-off-by: Huimin Zhang <thehobn@gmail.com>
Reviewed-on: https://review.coreboot.org/14187
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
On Mac OS X hdestroy seems to overwrite node->name. Hence
duplicate the string before stuffing it into the hash search
table.
Change-Id: Ieac2025f5c960cdb8d509dde7e92ba0dd32644b0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14443
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fix warnings:
Unescaped left brace in regex is deprecated, passed through in regex;
marked by <-- HERE in m/\#\s*define.*do\s{ <-- HERE / at util/lint/checkpatch.pl line 3261.
marked by <-- HERE in m/\(.*\){ <-- HERE / at util/lint/checkpatch.pl line 3750.
marked by <-- HERE in m/do{ <-- HERE / at util/lint/checkpatch.pl line 3751.
marked by <-- HERE in m/^\({ <-- HERE / at util/lint/checkpatch.pl line 4194.
Change-Id: If0c1f07a16df9e6cd1c1393a31af8b8ea6a66b01
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14310
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The coding guidelines say that all objects should have fully
qualified types (unsigned int instead of unsigned).
This script finds violations of that rule.
Steps for the filter:
1) Find all lines in the coreboot tree that have the word 'unsigned'
followed by a space.
2) Exclude directories that aren't in the include list or
are specifically excluded.
3) Exclude files that aren't specifically included.
4) Filter out legimitate uses 'unsigned int' or 'unsigned long' for
example.
5) Filter out lines that begin with '/*' or '*'
Change-Id: I46213c6a168e6aafa29a50af814bf7e0fcd32eb6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14269
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Because the builders have the coreboot cross-compilers in their path,
the XGCCPATH variable needs to be set after building the new toolchain
before it will be used.
- Add $DEST/bin to $PATH if $DEST is set, add the default location
for toolchain builds otherwise. Because the jenkins build image puts
the tools in the path, we ca
- Add KEEP_SOURCES option to help speed up compilation (Slightly).
- Log .xcompile for verification that the right toolchain was used.
- Verify that test-toolchain passes.
Change-Id: I7c270dab94be7e8f801d527169767018a24986e4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14231
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Also, fix up the following driver subdirectories by switching
to the src/drivers/[X]/[Y]/ scheme as these are hard requirements
for the main change:
* drivers/intel
* drivers/pc80
* drivers/dec
Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14047
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This is taken from FILO and slightly enhanced.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ieadd9db3f1013ec1cd9f5a1dc44e17587617f1d1
Original-Change-Id: I961a7ddcd39657c9463806d7b82757eff0a4ac57
Original-Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Original-Reviewed-on: http://review.coreboot.org/190
Reviewed-on: https://review.coreboot.org/14386
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Datasheet
https://www.exar.com/content/document.ashx?id=21368
Add support for Exar chip used on a custom board
that was designed to connect to the Olive Hill Plus
development platform. The register dump was verified
on the Olive Hill Plus platform.
Change-Id: Ibd3e13eefb706bd99b6e5b38634f6855b39848ab
Signed-off-by: Derek Waldner <derek.waldner.os@gmail.com>
Reviewed-on: https://review.coreboot.org/14367
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Store both the version number and git hash in the file name
when copying the buildgcc script to the destination directory.
Also, fix the quoting in the lines touched anyways, and move the
script to $TARGETDIR/share/
Change-Id: Ib37dc2be57ee7f0ae18a0b954f537f8b4c2db9d0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14347
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Do not disable warnings about unused but set variables to further
improve the code quality.
Change-Id: I25fa29ac42c9d09596d03f11fb01f31635a62a11
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/3981
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Changes in visible behaviour:
- The default make target doesn't run the tests anymore
- All generated files are stored under util/romcc/build/
(or $BUILD_DIR)
Change-Id: If003240742eb1902a6e9b337cdee299d7d66ee06
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14341
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add all currently clean directories.
Change-Id: Ibfb6432b485adb7fdc930f57ea0af4ff35921d37
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14332
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add some additional filters for files that do not require
license headers.
- Add an alternative wording for the BSD license that is used
in several files.
- Add string for dummy files
- Stop checking if there are no files left.
- Remove 'local' keyword which is not posix compliant.
Change-Id: I2ed1b0572b5fbe84ea86173b7ec2106454399547
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14324
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Differences:
- The test logic is now only implemented in one place (pending the
deletion of the old parts), whereas it previously was implemented
both as make rules and as a pair of shell scripts.
- Tests don't need to be registered anymore. Just adding a new file
with the correct name is enough to have it tested.
- The code is hopefully more readable and maintainable.
- The new test script supports colors (if the standard output is a
terminal and --nocolor was not passed on the command line).
Things to do in follow-up patches:
- Remove the old test code
- Test or remove fail_test*.c, hello_world*.c and raminit_test*.c
- Fix regressions that have built up over the years, while making sure
not to introduce new ones
- Makefile integration
- Jenkins integration
There are tests in the makefile that specify -fno-always-inline, but
this option doesn't exist anymore, so I didn't port them over.
Change-Id: Idd6b89368c1e36555cb880c37bbe07035c938cd7
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14291
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
This makes it easier to check the output against a reference output.
Change-Id: I9c7ae538b708399a5cadd18e498618d7480d240f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14276
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Newer versions of Linux implement a sysctl variable called vm.mmap_min_addr
that controls the minimum address a virtual memory mapping may have[1]. It is
usually set to 64KiB.
Map the start of the segment specified in util/romcc/tests/ldscript.ld to
128KiB, just to be sure.
[1]: https://www.kernel.org/doc/Documentation/sysctl/vm.txt
Change-Id: I72a5c65ca5e7d3a77d6ec897ae3287e3ea05cc2f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14277
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Previously, on systems that are supposed to have ME but
are librebooted, there was no message printed to tell the user
that no MEI was detected. Fixed this bug.
Change-Id: I59681c194ae5e76533dd777374e26d1aea727337
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/14334
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
- Look at entire tree instead of just the current commit. This was
causing the test to overlook some issues that were already in the tree.
- If git is on the system, and the code is in a git repo, use the
'git ls-files' command to find the files to examine. If those
conditions aren't met, fall back to using the find command.
- Wrap the command so it's easier to read.
Change-Id: I3dce219a29ffb1ae56a31318b995e3ba8ea43e70
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14194
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Many of the tools and libraries don't use a target architecture, but
they were still getting put in one. This change separates out the
builds that need the target architecture from the ones that don't,
and sets the build directory accordingly.
This will help keep from rebuilding the libraries when building all
of the tools if you keep the temporary files around (-t option).
Change-Id: Id6c17719332f2244657f103f5f07ca7812d51af1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On certain versions of /bin/sh the following sequence
causes problems.
'$CC --version | grep clang &>/dev/null && ...'
The above is a bashish for 2>&1 >/dev/null. However, buildgcc
is interpeted by /bin/sh which doesn't necessarily mean bash.
On dash it's effectively forking grep off into the background
and always evaluating an empty statement to /dev/null while
unconditionally running whatever follows the &&.
Change-Id: Ie3a2ebb12226434d50a7b2a7e254c8b80ae4c46b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14281
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add a script to help us verify that our lint tests are working.
This isn't finished, because it should test all of the failure modes.
Some of the tests, 008-kconfig in particular have a lot of ways
that they can fail.
Currently the Kconfig test is triggered by removing the board
name file in test 006. This removes the only place the config
option for that board name is located.
Change-Id: If01c6daf1c99d097a19995b4befae90a3b5db2d6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14198
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
libgcc fails to compile on a number of platforms when a
non-GNU sed is used.
This patch has been verified by building the MIPS reference
toolchain on OS X.
Change-Id: Ia1c18ea4359de7707ac2e2640f1b8f107c47cd8c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14275
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
On certain versions of /bin/sh assigning variables with spaces
unquoted leads to failures. Therefore, quote variables that
are known to be passed in that have spaces.
Change-Id: I007c56c3bfb8183bb4b16cf0591f6aa508fd105d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14280
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This reverts commit 272a1f05b9.
In Chrome OS this command's usage was dropped in favor of another
solution. As it's not used drop the support for it.
Change-Id: I58b51446d3a8b5fed7fc391025225fbe38ffc007
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14261
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Otherwise, on OS X, some architectures will fail
to build libgcc (verified for ARM toolchain).
Change-Id: I8b58e0582596ad39cad92e9d478158c46a96a26e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14256
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Most cross compilers fail to compile on systems with Clang being the
default compiler (OS X and some BSDs). Clang dislikes some of GCC's
autogenerated code. We also missed switching CFLAGS to CXXFLAGS when GCC
switched to C++ compilation per default.
Change-Id: I87caa1a15982c431048aa79748ea7ef655a9a3a1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14232
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change the existing chromeos.fmd files and the dts-to-fmd script to mark
RW_LEGACY as CBFS, so it's properly "formatted".
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I76de26032ea8da0c7755a76a01e7bea9cfaebe23
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 717a00c459906fa87f61314ea4541c31b50539f4
Original-Change-Id: I4b037b60d10be3da824c6baecabfd244eec2cdac
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336403
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14240
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
cros_sdk puts weird stuff into CFLAGS and LDFLAGS and we never care
because we don't use CFLAGS. futility's Makefiles do.
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I512d5adb55cad8b31dc29d9c076ecd5d9c701cf6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58739332ddba7ef759aac37f3a4410dd487f210f
Original-Change-Id: I66898c7e66d808047b0326c7471c64eaae950b15
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336436
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14237
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Datasheet: http://www.fintek.com.tw/files/productfiles/F81865_V028P.pdf
There is a multi-function select register listed as 0x2a-1 and 0x2a-2.
These are the original names in the datasheet, but superiotool will
display register 0x29 and 0x28 and their values.
This patch renames them both to 0x2a and shows both of the default values
for them. They are both 0x00, so one of them could be dropped though.
Change-Id: Iad91f9e4755d2d1a123e56ab0fa9257be7ea9978
Signed-off-by: Wilbert Duijvenvoorde <w.a.n.duijvenvoorde@gmail.com>
Reviewed-on: https://review.coreboot.org/5404
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The board status script wasn't checking the entire tree to make sure
that all boards had board_info.txt files. Also it would only print
out the first issue that was found.
Change-Id: I5f2fa9e564c805c6dbee7a35cab80c1c342567a5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14118
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Add coreboot build tests after running the toolchain build. This
verifies that everything still builds with the new toolchain.
Change-Id: Ifa51db897925c0b77791c83bbcbfd75045c907b5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14156
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The intelmetool shows information about the Intel
Management Engine for different platforms.
Original source code can be found under following link:
https://github.com/zamaudio/intelmetool.git
Change-Id: I0eb17833a21eb04cf9245a7312289a4102bec1a9
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/14136
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Add check_for_library routine to test for missing libraries.
- Add a check for zlib.
- Remove 'utility' text from please_install() routine since we can test
for libraries or utilities now.
- Remove incorrect 'solution' text from alternate install since I was
updating that line.
Change-Id: Id5ef28f8bde114cbf4e5a91fc119d42593ea6ab2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14147
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These are multi-threaded decompressors for .gz and .bz2 compressed
files. If they're installed, use them to decompress, if they're not,
use the standard single-threaded decompressors.
Change-Id: I397740817e6b234a43b62075899964bdab14f121
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14146
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a newline after the supported version text.
Move $TARGETDIR left so that longer paths print better.
Change-Id: If520e1b8657a526dee27763aee62cb78777d020d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14145
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is required on powerpc64 to build both little endian and big endian
libgcc.
Change-Id: I295c8ee5e8131d4108e98d1bfd53abb8bd8982b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14163
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Update IASL from 20150619 to 20160318
See release notes at acpica.org
Change-Id: Ic7e7b3956378ad611069e984d5a59c78e4cb08b1
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/12817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
make_idb.py only support RK3288 before, add chip parameter, so we can
support RK3399 either.
Change-Id: I6811acb7f0cdaf1930af9942a70db54765d544d5
Signed-off-by: huang lin <hl@rock-chips.com>
Reviewed-on: https://review.coreboot.org/13913
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This includes a fix that allows using cbootimage with paths containing
the "@" sign, which happens sometimes in jenkins configurations.
Change-Id: I83154afa35b6d24449e713e57031b1a93d7ac748
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14090
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change the comparison of build_timeless from -eq to =
This was generating an error if BUILD_TIMELESS wasn't set:
util/genbuild_h/genbuild_h.sh: line 27: [: : integer expression expected
This wasn't causing the script to fail, and won't even if 'set -e' is
added to the script because the error happens inside an 'if' clause,
which is specifically excluded from failue on 'set -e'.
Change-Id: I6a4e147ece23e83ee682d72db35be9e5d4088c78
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14080
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Commit c49014e (timestamp: add tick frequency to exported table)
refactors the code, but forgets to correctly scale the frequency to
megahertz, where the value is read from sysfs, so that printing time
stamp information shows milliseconds instead of microseconds, as can be
seen on the output `cbmem -t` for the ASRock E350M1 below.
```
0:1st timestamp 515
10:start of ramstage 515 (0)
30:device enumeration 515 (0)
40:device configuration 610 (94)
50:device enable 614 (4)
60:device initialization 624 (9)
70:device setup done 639 (14)
75:cbmem post 844 (205)
80:write tables 844 (0)
90:load payload 849 (4)
15:starting LZMA decompress (ignore for x86) 849 (0)
16:finished LZMA decompress (ignore for x86) 869 (20)
99:selfboot jump 869 (0)
Total Time: 350
```
So scale the return value correctly to megahertz, by dividing it with
1000.
```
0:1st timestamp 515,655
10:start of ramstage 515,655 (0)
30:device enumeration 515,663 (7)
40:device configuration 610,620 (94,957)
50:device enable 614,680 (4,059)
60:device initialization 624,618 (9,938)
70:device setup done 639,553 (14,934)
75:cbmem post 844,707 (205,154)
80:write tables 844,710 (2)
90:load payload 849,532 (4,821)
15:starting LZMA decompress (ignore for x86) 849,655 (123)
16:finished LZMA decompress (ignore for x86) 869,903 (20,247)
99:selfboot jump 869,922 (19)
Total Time: 354,261
```
Change-Id: Iea032c62487c7946b6194a90268755034c6350df
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/14086
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Adds -D / --density option to change the chip density. This is only
implemented for IFD version 1 as I do not have an IFD version 2 to
test this. Density of both chips is changed by default, but a chip
can be selected using -C / --chip.
Change-Id: Iba7affbf6cbefa3147b7b0e019298d905e694716
Signed-off-by: Jan Tatje <jan@jnt.io>
Reviewed-on: https://review.coreboot.org/14032
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We want to start testing builds with additional Kconfig options to try
to get more coverage. This will allow us to enable various options to
test without having to add each individual option to the abuild script.
Change-Id: I9bb2bb6f38589e3bcc1282dc4cad51cf6f5149aa
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14016
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Change the makefile command $(shell pwd) to $(CURDIR) to find the
current directory without going out to the shell.
Change-Id: I4890eba6129630acd2883b92de77308d39949443
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13967
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Add powerpc64le-linux-gnu & nds32le-elf to the instructions as
supported architectures
- Add nds32le-elf as a supported architecture so it will stop warning
when you build it.
Change-Id: Ifcdbc3d082eae5b9b5f8828914e7d2b7ed1f13a4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13961
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add a comment to try to lower possible confusion later if the jenkins
tool builder fails to build a new tool. The URLs for the packages that
are downloaded are checked against known locations so that someone can't
maliciously download a package from somewhere and run it on the build
server. This provides a little bit of security, but could confuse
someone if they don't realize it.
Change-Id: I7858e3d86fc705b480f6792b6adf3d5349580e01
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13955
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We've recently added a jenkins test builder for the coreboot toolchain.
This patch allows what it builds to be controlled from the makefiles
checked into git instead of by a rule on the builder itself.
Change-Id: I65f70bac5ab97ecb27aae93ee370b26a2ab1f9c0
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13954
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Builds with BUILD_TIMELESS=1 shall always give a bit identical output
for stable inputs. This should help verifying that resulting rom files
stay the same across commits that shouldn't change the outcome.
To be useful for builds that rely on 3rdparty/arm-trusted-firmware,
this needs a similar change there.
Change-Id: Ia0a22e3e79fbd0abbd2a9071ecbeef6541787a08
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13412
Tested-by: build bot (Jenkins)
Reviewed-by: Damien Zammit <damien@zamaudio.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
'archive' concatenates files into a single binary blob. Files are
indexed by the base names. See archive.h for the format description.
BUG=chromium:502066
BRANCH=tot
TEST=Tested on Glados
Change-Id: Iea108160e65c8c7bd34c02af824a77cb075ee64b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 21a9ba860f29599ac029f8d49d32399c4e3a73a8
Original-Change-Id: I46b4efb339e3a1e05772ae752f2861026ca09cfc
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311200
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://review.coreboot.org/12925
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Build make with the rest of the toolchain, since the targets using
a Chromium EC need make 4.x
Change-Id: I7efb0c25f605f16c2d9a1e7c4b203f3bcdae671b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13923
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Because the perl error messages go to stderr, we were not catching these
on the build server. If the script has an issue, we want to know
immediately, so change the bash script that calls into the perl lint
tool to pipe these to stdout.
Change-Id: Ieeec9ccbd59177cfd1859a9738a4ee1fab803d28
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13877
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Sandy and Ivy Bridge processors use the same socket, and a mainboard
with the socket can support both types of CPUs. However, they use
different native graphics init code for LVDS and cause a crash if
running the wrong code.
This change detects the CPU type and then selects the right code to
run. It will add some more code in ramstage. It also merges the
{SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS.
Tested on a Lenovo T520 with i7-2630qm and i7-3720qm
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91
Reviewed-on: https://review.coreboot.org/12087
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
The what-jenkins-does build runs distclean when building the utilities.
It doesn't fail the build if distclean fails, but it generates a
scary warning.
Change-Id: Iac90958951976ed326a89ef2b5f2d9f17f9f2d6b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13888
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In Kconfig files, the 'if' and 'endif' statements need to match up. A
file can't start an if statement that's completed in the next file.
Add a check as the files are being parsed to make sure that they match
up correctly.
Change-Id: If51207ea037089ab84c768e5a868270468cf4c4f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13876
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
1. Change the function which integrated one firmware, to the function
which pushes the whole group. Use fw_table as a parameter instead
of using the global table name.
2. Let PSP2 and PSP1 not dependent on the other. It turns out PSP2
can exist without PSP1. For some APU, the PSP directory has to be
put in PSP2 field (ROMSIG 0x14).
3. Reserve 32 more bytes in PSP2 header. It is defined by spec. It
is tested, and it is true.
These above changes are overlapping, hard to split them. Sorry.
Change-Id: I834630d9596d7fb941e2cad5d00ac3af04a537b5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13808
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In e820entry struct, the members are defined using
standard types. This can lead to different structure size
when compiling on 32 bit vs. 64 bit environment. This in turn
will affect the size of the struct linux_params.
Using the fixed width types resolves this issue and ensures
that the size of the structures will have the same length
on both 32 and 64 bit systems.
Change-Id: I1869ff2090365731e79b34950446f1791a083d0f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
When linux is used as payload, the parameters to the kernel are build
when cbfstool includes bzImage into the image. Since not all
parameters are used, the unused will stay uninitialized.
There is a chance, that the uninitialized parameters contain
random values. That in turn can lead to early kernel panic.
To avoid it, initialize all parameters with 0 at the beginning.
The ones that are used will be set up as needed and the rest
will contain 0 for sure. This way, kernel can deal with the
provided parameter list the right way.
Change-Id: Id081c24351ec80375255508378b5e1eba2a92e48
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13874
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Numerous changes have gone in since the last bump, let's increase
the version.
Change-Id: Ie3ae8c24b26bd22b70bc5ddf5c1125b5b1d3a021
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13873
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This should allow the builder to download the packages securely.
Change-Id: If5feeff85bd551cbe08849421197d11cc2432d1e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13867
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When writing to a logfile, the color codes just make things confusing.
The --nocolor option will allow these to not be printed.
Change-Id: I67645aac20b420ac83b828e77e0e50aab88d3d47
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
coreboot's top level Makefile does the same, so let's stay consistent.
Change-Id: I9e995f3ecadd05d6fbfda64b45dee3a9900d9189
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13869
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The current default of 6 lines leaves us with no context
about the actual error:
*** ERROR: 3 warnings encountered, and warnings are errors.
coreboot-gerrit/util/kconfig/Makefile:38: recipe for target 'oldconfig' failed
make[1]: *** [oldconfig] Error 1
make[1]: Leaving directory 'coreboot-gerrit'
Change-Id: I67e7d740e7b3b1c66005dc1bf50557a20bc15428
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12720
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Our GDB doesn't support RISC-V yet, so let's disable it for now
to keep the build from breaking.
Change-Id: Iecc6d97fb16d16410c56965abeea55c67800f220
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13872
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
With this change you can say
$ make DEST=/opt/cross-1.35
to get all of the cross toolchain built and installed to /opt/cross-1.35
Change-Id: Icc3e605c4824bfa2831d030e4ed9dd0331ff722f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13847
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
qemu-power8 wants to tell about itself with XML, and so
we need to build gdb with EXPAT so it can understand XML.
Change-Id: I460e27f883956ed5d54e6070916e2682ee0f7a1b
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13846
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
It was tested with a mini-PCI POST card on a Toshiba
Satellite 1410 laptop with the stock BIOS.
Change-Id: Icdc0860e2c72b17862601c2cc59eaf0f3d8a0e54
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/13763
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This reverts commit 17cb0370a7.
It’s the wrong thing to do, to just disable the warning. The code is
fixed for 32-bit user space now in Change-Id
I85bee25a69c432ef8bb934add7fd2e2e31f03662 (commonlib/lz4_wrapper: Use
correct casts to ensure valid calculations), so enable the warning
again.
Change-Id: I6d1c62c7b4875da8053c25e640c03cedf0ff2916
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/13772
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The builders run perl scripts in taint mode, and some of the checks
that the kconfig lint script were running were tainted, causing
the script to terminate early when running on the servers.
This checks to see if taint mode is enabled, and untaints the path
if it is. All external tools (git & grep) must be in
/bin, /usr/bin, or /usr/local/bin.
This also removes the check for unused kconfig files if taint mode
is enabled.
Change-Id: I8d1e1c32275f759d085759fb5d8a6c85d4f99539
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13751
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
There was a report that xcompile wasn't finding the compilers correctly,
so to aid in future debugging, this adds a parameter to show what
xcompile is doing as it runs.
Run from the command line:
./util/xcompile/xcompile --debug
Change-Id: I779cb3de7b4e3f62a2ef2a6245c3538be518870c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13047
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It seems that the exact behavior of -Wsign-compare changes between GCC
versions... some of them like the commonlib/lz4_wrapper.c code, and some
don't. Since we don't have a well-defined HOSTCC toolchain this slipped
through pre-commit testing. Explicitly silence the warning to ensure
cbfstool still builds on all systems.
Change-Id: I43f951301d3f14ce34dadbe58e885b82d21d6353
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13769
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Some users may wish to run this script using a coreboot image
that does get built in the usual build/ directory, for example
if abuild is used to generate the image.
Change-Id: I7e98780f8b7b57ebbf3babd6a289f0e4fd4103d8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/12489
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This turned out really handy when I tried to build coreboot
for my Chromebox.
These scripts can be used to extract System Agent reference code
and other blobs (e.g. mrc.bin, refcode, VGA option roms) from a
Chrome OS recovery image.
crosfirmware.sh downloads a Chrome OS recovery image from the recovery
image server, unpacks it, extracts the firmware update shell archive,
extracts the firmware images from the shell archive.
To download all Chrome OS firmware images, run
$ ./crosfirmware.sh
To download, e.g. the Panther firmware image, run
$ ./crosfirmware.sh panther
extract_blobs.sh extracts the blobs from a Chrome OS firmware image.
Right now it will produce the ME firmware blob, IFD, VGA option rom,
and mrc.bin
Change-Id: I5fb7e14b10e03e18cd360bc35f1dc92e8ed34e63
Signed-off-by: Joe Pillow <joseph.a.pillow@gmail.com>
Reviewed-on: https://review.coreboot.org/13752
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.
For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).
BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).
Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change I9dd8e4027be21363015cd8df9918610e206afce2 replaces
colons with underscores in paths, to improve compatibility of paths.
This breaks any attempt to interpret the timestamp part of the tree
as a timestamp, so revert the change before doing so.
Change-Id: I0e82e4045120700e9b4fcc8c6e54d761068eaea3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/13766
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The commit description is enough and this avoids hourly updates of the
timestamp by a cron job.
Change-Id: I30e9fcf28caf94edbb816c22bc8fbcb7ab09ae6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13744
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I952a694f645caf9d9726965e39afc09c6fdce0e3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13741
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I1240c215f3d6c3934911c096e2ecbabff175d501
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13740
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If we only need to "combo" two PSP directories into one image,
we can put first address in romsig 0x10 and second one in
romsig 0x14.
If we really need to put three, the 0x14 is the combo directory
which points to multiple level-2 PSP directories.
I guess that two PSP can also use combo directory, with only
one level-2 directory. But nobody seems to do that.
Change-Id: Ic450a846bc04db90a75cd417b6d7104fe2a5b177
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13739
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This changes how we build and use cbfstool:
1. If build/cbfstool exists, use it.
2. Otherwise, try util/cbfstool/cbfstool.
3. As a last resort, build it and clean it when we're done.
Hopefully this will resolve issues people have had with permissions
and reduce overhead of building cbfstool when not necessary.
Change-Id: I5de6581ca765e5a8420b101a5865ddd633334b9c
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/12490
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This is a pretty basic script that can be downloaded with wget to a
ubuntu-based live image, and will set it up so that the board_status
script can connect and run cbmem.
1) Verify that this is being run on a ubuntu-based live image by
checking for the installer.
2) Install and configure the ssh server.
3) Set a root password 'coreboot' so that root can log in.
4) download and build cbmem.
5) find and print the IP(s) that should be used to connect.
Change-Id: I068423c9f5501b156f25371d89559f4a206916b5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13648
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Drop buggy duplicate implementation of intXX handlers
and provide enough glue to use all of YABEL.
Change-Id: I2db77a56a2a991cb84876456dcbb3a843a0d9754
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12117
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
In accordance to change I8bd981c4696c174152cf41caefa6c083650d283a
change autoport as well, as suggested by Vladimir.
Change-Id: I7cdaa779c11fd3f791a3ad213c24d927b5da76b9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13731
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Power 8 was once again having build issues. Adding --with-system-zlib
fixes them. It seems the builtin one is only needed when you are going
to build programs, and it falls apart in other cases.
Searching --with-system-zlib reveals this to be a very popular topic.
This has not broken other toolchain builds (for me); it should not for
anyone else. Then again, this is gcc, about which I need say no more.
Change-Id: Ica9d057d88982543b5dda471cc949c31fe15932f
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13700
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
oldconfig is regularly used to clean up templates that sometimes contain
duplicates or old symbols.
Since it cleans up the config, it doesn't need to fail on issues.
Change-Id: Ife0e9e3b9bfdde1eb6be0e2e38e81b9042cb7950
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13687
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Apparently acpica-unix is shipped under
"A non-open source license (the 'Intel license')" while acpica-unix2
comes under GPLv2/BSD dual license. (see https://acpica.org/Licensing)
So go with unix2.
Change-Id: I412812187bbf488eb4ad6d7fb8d2840f2f5e06d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13686
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
cbfstool has a routine to deal with old images that may encourage it to
overwrite the master header. That routine is triggered for
"cbfstool add-master-header" prepared images even though these are not
at risk, and - worse - destroys the chain structure (through a negative
file length), so avoid touching such images.
Change-Id: I9d0bbe3e6300b9b9f3e50347737d1850f83ddad8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13672
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
When updating an old .config file that has a symbol that has been
removed from the current Kconfig tree, kconfig will generate a warning
and fail to save the updated file. This is incredibly annoying, and
not the goal when trying to eliminate Kconfig warnings.
Instead of generating a warning, just print a message that it's being
ignored. This will remove the offending symbol, while allowing the
updated config file to be saved.
Split the change from 1 line to 3 lines to keep it at 80 characters.
Change-Id: I09d5775c9ed14bde80077b51b862a7f41bee098a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13674
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
off_t wants to be printed with %zd, not %d.
Change-Id: I3f6e1988bb306f4a7738f1f3ccb2093518e4ceb3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13655
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Make sure that the statically defined CRC functions are
enabled by the same conditionals as the code using them.
Change-Id: Ic24e2ed1a80b8e5f6623881b08d86f7b608a206e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13654
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
dep has not been defined (and will hence break the build)
LDFLAGS is not used.
Change-Id: I4f91e1e7a176367aa4e1a1c63a2afc0b3186767e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13653
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Add the doimage sources in util/marvell
- Add dependency in root makefile
- Add dependency in makefile for armada38x soc
BUG=chrome-os-partner:47462
TEST=emerge-cyclone coreboot
BRANCH=tot
Change-Id: I81b30e0865cbd619a41659c3f2819ad3bafc5f24
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4b2a990150580e0b879a346ed8b71b3765b66bab
Original-Change-Id: I7e89b5e96206fde97ce69c296850122fd6c858f9
Original-Signed-off-by: Kefei Yao <kfyao@marvell.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/318046
Original-Commit-Ready: Kan Yan <kyan@google.com>
Original-Tested-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org>
Reviewed-on: https://review.coreboot.org/13137
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Add lint-stable script with just error checking
- Enable warnings in addition to errors in non-stable test.
- Use git grep if the code is in a git repo now that exclusions are
working.
- Check for perl, and ask the user to install it if it isn't
available.
Change-Id: Ie60d21f4ef8a61d879f116eb2056eb805b0a55f2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13542
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Make the gcc build system create multiple libgcc.a instances for
different ABIs.
Change-Id: I1c888bf751bf43566da8927ed0aedb53857363bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13625
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In the same time remove few native gfx options which were improperly set
and only added dead code to the binary.
Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13649
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
To be able to run this as a lint-stable test, demote these to warnings
for now. After the current CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
issues get fixed, these can be promoted again.
Change-Id: I1432980eb0c871fc61c12dcc351f8d46513a7965
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13541
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This looks at the coreboot codebase for the IS_ENABLED macro, and
gives an error if there is a symbol used without the CONFIG_ prefix.
This only works for symbols of type bool.
A future check will be added for all symbols, but that will take
a significant amount of time to run, because each symbol will need
to be searched for individually.
Change-Id: I92f2de2d231610d1a788da965f21966d89c2f25c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13538
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is needed for stout EC init.
Change-Id: I5c73499c17763229840152a473a2d820802ee2f6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13535
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We prefer the default AT&T dialect on x86
Change-Id: I7a5778c82ab5df6e971dfc73e98373893cfeeb92
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13135
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This patch adds strings for the timestamp changes and additions in the
Chrome OS bootloader (depthcharge). See http://crosreview.com/323783
for details and justification.
BRANCH=none
BUG=None
TEST=Booted Oak, confirmed that cbmem output includes new timestamps.
Change-Id: I9ad68edca660f4e4286e680316b4e14f1259d1bc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c1b1f6d669f62217ed701cd3561b9d14973d890a
Original-Change-Id: I7256ca62c69f2ab7279fd2656fbbfa610e04fc44
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323871
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13576
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I forgot to add that when I added support to buildgcc.
Change-Id: I586d64805e72f9512057a4e0698bdee19cc53146
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13568
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Idee4eb5d112e3f6bffced0681e9112101bed6763 has renamed
the architecture by accident. Rename it back.
Change-Id: I5509d2aa09df513789325bc24d9b696a09cb898f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
This makes the cross{gcc,tools}-* targets build iasl again, without
building it many times for cross{gcc,tools}
Change-Id: I7546c2af5f7cce3a4f1a08f593fb5cbc675d69ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13564
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Update the qconf.cc and qconf.h to upstream code, which added support
of QT5 and removed the support of QT3.
All code is ported from kernel.org, with only one line added to qconf.cc.
int kconfig_warnings = 0;
Change-Id: Ice77cddcc00e43375039379978e55f42acf867f7
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13130
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of instructing users to edit xcompile when they want to build
a quark platform, give the build a way to set -march=586 so that
the quark code will build correctly. The Quark processor does not
support the instructions introduced with the Pentium 6 architecture.
Change-Id: I0ed69aadc515f86f76800180e0e33bcd75feac5a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13552
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
There is a lot of potential to completely get rid of Makefile
and keep everything in Makefile.inc, but for now this declutters
the main Makefile.inc.
Change-Id: I653313c74207f955514c036c81efcbfd988827c9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13518
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of passing a variable around and painstakingly making sure that
one target builds with it, and the others without, make IASL a
dependency of the "catch all" targets.
This also drops iasl as dependency from individual architecture targets,
but things are more orthogonal that way.
Note: instead of `make crossgcc-i386`, use `make crossgcc-i386 iasl`
Change-Id: I8cd2e89acdd0f795836571470bad28fbf8797f58
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13563
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Some Chrome ECs are based on that architecture
Change-Id: Ib5d0c2f6f518fafc1ceb02c5f71c0935d16c66bb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13562
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The ARM target can compile for much more than just v7a.
Change-Id: Ia4f67abcffdfe9c56c5d1848c75dfea83755e755
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13517
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
If the GPLv2 or GPLv2+ license header is being used on a
coreboot file, make sure it has two paragraphs as specified by
the Common License Header section in the developer guidelines
in the coreboot wiki.
Change-Id: Ifffa0fa7272f5a4b129d4b7b8a515f8795bc2401
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the ability to release a given commit id, and normalize the tarballs
to use coreboot/1000 for owner and group, and the last commit date as
mtime for all files.
Change-Id: Ia349f429090fe9804f7f14c226812646e2f712be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13514
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Not much testing, update mostly so we can test with the
latest scan-build.
Change-Id: I50d28b7e0dfd31f9ae565c8515d5ab1760ca4c62
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13516
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The compiler really supports a whole line of ARM CPUs, not just
ARMv7a:
arm-eabi-gcc: note: valid arguments to '-march=' are: armv2 armv2a
armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m
armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m
armv7-r armv7e-m armv7ve armv8-a armv8-a+crc iwmmxt iwmmxt2 native
So let's reflect this in the cross compiler name.
Change-Id: I717760d80954655b2de9ae019b813d81e9a75762
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13515
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The readme describes the operation and usage of kconfig_lint.
It also lists all the notes, warnings, and errors that kconfig_lint
looks for.
Change-Id: I873f394ff93fce42cd9638cbbad6134f1aef3a6a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13464
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Don't warn on Kconfig.orig and Kconfig~ files when trying to verify
that all the Kconfig files in the coreboot source tree are being loaded.
Change-Id: Ie7babe60b29735e5ccc5f93f4e42ad82dfb47044
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13462
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- The prompts were not getting incremented, so each prompt for a symbol
would overwrite the previous.
- Record the menu each prompt is in.
Change-Id: Ia282a30344d5e135f4f2027be9aff0e49a4e5edb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13461
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Although there's no reason we COULDN'T use tristate types, we haven't
up to this point. If there's a good reason to use them in the future,
this check can be removed.
Change-Id: I5f1903341f522bc957e394bc0fd288ba1adab431
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13460
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The code had originally been using standard grep to look through the
coreboot tree for Kconfig symbols. When this was switched to git grep,
the --exclude-dir options didn't work, and nothing was added to exclude
the directories that shouldn't be searched for symbols. This resulted
in invalid warnings as it searched directories that had Kconfig symbols
for other projects.
This merges the exclusion list for both the regular and git versions
of grep for consistent behavior.
Change-Id: I7fed8b9fa827cb14f7373e7b774acc56e43cb6ff
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13459
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes at least one kconfig_lint warning.
Change-Id: I35edf57e90315a8372aaf3b41e923cd8dad7386a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13458
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The configuration that coreboot uses for setting selected symbols
typically involves a structure like this:
config BLEH_SPECIFIC_OPTIONS
def_bool y
select SYMBOL
This leads to an an extra kconfig symbol BLEH_SPECIFIC_OPTIONS
that is never referenced by anything else, generating a warning.
Since this is currently the construct that coreboot uses, filter it
out of the warnings for now.
Change-Id: I85a95e4c4e8469870c7f219f2a92955819845573
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13457
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The code had originally been using standard grep to look through the
coreboot tree for Kconfig symbols. When this was switched to git grep,
the --exclude-dir options didn't work, and nothing was added to exclude
the directories that shouldn't be searched for symbols. This resulted
in invalid warnings as it searched directories that had Kconfig symbols
for other projects.
This merges the exclusion list for both the regular and git versions
of grep for consistent behavior.
Change-Id: I69a1e0b30fecca152e02a511c82248b6091b3d8b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13456
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Gnu make won't build in directories that have a colon in their name.
When the makefile expands a variable containing a dirctory name that
has colons in it, it seems to interpret that as a makefile target, and
fails the build.
Many other characters also confuse the makefiles, including spaces,
ampersand symbols, dollar signs, etc.
I've started including scripts into the board-status directories to
do the build of the rom that was tested, and this is preventing them
from working without renaming the directory before doing the build.
Change-Id: I9dd8e4027be21363015cd8df9918610e206afce2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13490
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
While assembling CBFS images within the RW slots on Chrome OS
machines the current approach is to 'cbfstool copy' from the
RO CBFS to each RW CBFS. Additional fixups are required such
as removing unneeded files from the RW CBFS (e.g. verstage)
as well as removing and adding back files with the proper
arguments (FSP relocation as well as romstage XIP relocation).
This ends up leaving holes in the RW CBFS. To speed up RW
CBFS slot hashing it's beneficial to pack all non-empty files
together at the beginning of the CBFS. Therefore, provide
the 'compact' command which bubbles all the empty entries to
the end of the CBFS.
Change-Id: I8311172d71a2ccfccab384f8286cf9f21a17dec9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13479
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to more easily process the output of 'cbfstool print'
with other tools provide a -k option which spits out the
tab-separated header and fields:
Name Offset Type Metadata Size Data Size Total Size
ALIGN_UP(Offset + Total Size, 64) would be the start
of the next entry. Also, one can analzye the overhead
and offsets of each file more easily.
Example output (note: tabs aren't in here):
$ ./coreboot-builds/sharedutils/cbfstool/cbfstool test.serial.bin print
-r FW_MAIN_A -k
Performing operation on 'FW_MAIN_A' region...
Name Offset Type Metadata Size Data Size Total Size
cmos_layout.bin 0x0 cmos_layout 0x38 0x48c 0x4c4
dmic-2ch-48khz-16b.bin 0x500 raw 0x48 0xb68 0xbb0
dmic-2ch-48khz-32b.bin 0x10c0 raw 0x48 0xb68 0xbb0
nau88l25-2ch-48khz-24b.bin 0x1c80 raw 0x48 0x54 0x9c
ssm4567-render-2ch-48khz-24b.bin 0x1d40 raw 0x58 0x54 0xac
ssm4567-capture-4ch-48khz-32b.bin 0x1e00 raw 0x58 0x54 0xac
vbt.bin 0x1ec0 optionrom 0x38 0x1000 0x1038
spd.bin 0x2f00 spd 0x38 0x600 0x638
config 0x3540 raw 0x38 0x1ab7 0x1aef
revision 0x5040 raw 0x38 0x25e 0x296
font.bin 0x5300 raw 0x38 0x77f 0x7b7
vbgfx.bin 0x5ac0 raw 0x38 0x32f8 0x3330
locales 0x8e00 raw 0x28 0x2 0x2a
locale_en.bin 0x8e40 raw 0x38 0x29f6 0x2a2e
u-boot.dtb 0xb880 mrc_cache 0x38 0xff1 0x1029
(empty) 0xc8c0 null 0x64 0xadf4 0xae58
fallback/ramstage 0x17740 stage 0x38 0x15238 0x15270
(empty) 0x2c9c0 null 0x64 0xd2c4 0xd328
fallback/payload 0x39d00 payload 0x38 0x12245 0x1227d
cpu_microcode_blob.bin 0x4bf80 microcode 0x60 0x17000 0x17060
(empty) 0x63000 null 0x28 0x37cf98 0x37cfc0
Change-Id: I1c5f8c1b5f2f980033d6c954c9840299c6268431
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13475
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since NetBSD does not support uname -o, push check for CygWin
inside separate non-failing condition in Makefile.
Change-Id: Ibd264384f49b33412f0ef8554bd9c9fb8f60a892
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12831
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds three timestamps to coreboot and the cbmem utility that
track the time required to read in the Chrome OS Vital Product Data
(VPD) blocks (RO and RW). It's useful to account for these like all
other large flash accesses, since their size is variable.
BRANCH=None
BUG=None
TEST=Booted Oak, found my weird 100ms gap at the start of ramstage
properly accounted for.
Change-Id: I2024ed4f7d5e5ae81df9ab5293547cb5a10ff5e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b97288b5ac67ada56e2ee7b181b28341d54b7234
Original-Change-Id: Ie69c1a4ddb6bd3f1094b3880201d53f1b5373aef
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322831
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13139
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
With the introduction of flashmap cbfs alignment of files gets
broken because flashmap is located at the beginning of the flash
and cbfstool didn't take care about that offset.
This commit fixes the alignment in cbfs.
Change-Id: Idebb86d4c691b49a351a402ef79c62d31622c773
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13417
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Id0316042f665ec9c095887cf6a37a7949ed8e861
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13421
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Not just *-linux-gnu.
Change-Id: Ib817c6d207d3b69ce7595505f2b45f3be35b7d2f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13420
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
What's the exact difference between TARCH, TSUPP and TBFDARCHS? Fear no
more, it's documented.
Change-Id: I18717eb1e20b1c0a82a485d391de2794a77c59ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13419
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Instead of people open coding the offset field access within a
struct buffer provide buffer_offset() so that the implementation
can change if needed without high touch in the code base.
Change-Id: I751c7145687a8529ab549d87e412b7f2d1fb90ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13468
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
It may still fail on non-Linux, and the compiler may do fancy things,
but it builds.
Change-Id: If3456f5fef8d01082a49978dc7cda5450f96f5cc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13416
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
gcc 4.4.7 fails to compile due to the missing initializers
for all struct members. Add initializers for all fields.
Change-Id: If1ad4fff0f965ccd7e821820c0703853c1e5c590
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13418
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add NetBSD-specific locations under pkg/ and missing linker flag
for libpciutils.
Change-Id: I812817a374aaba561b28d8a22f20d238c9dca32b
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12830
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
GMP's configure tries to build for 64-bit with a 32-bit userspace on
NetBSD too. Help it by forcing ABI=32.
Change-Id: I290ea0ef1626fdd88dc3ff74fadb9578ef6a1c9c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13067
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Make the requirement of python2 explicit in scripts that are incompatible
with python3.
Change-Id: I77f150bdb3aab316fc3c3a21b911db397fa0106f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13286
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This reverts commit 89798bcb0c.
Disable building gnat again as it turned out that many distros don't
ship with a sufficient recent version of gnat. We'll have to find a
reliable way to check for the installed gnat version and query the
user or bootstrap gcc in that case.
Change-Id: Ife7cf7c9d1567aca898ce308b120a7b9e146e5f5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13422
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
This way users are not constrained to have it installed as
/usr/bin/python.
Change-Id: I822b6c402004aad8f2353e71afbd8ee3f9d26d45
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13285
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There can be an error when a cbfs file is added aligned or as
xip-stage and hashing of this file is enabled. This commit
resolves this error. Though adding a file to a fixed position
while hashing is used can still lead to errors.
Change-Id: Icd98d970891410538909db2830666bf159553133
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13136
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The mt8173 boot rom expects the bootblock to be in a certain format.
gen-bl-img wraps our bootblock appropriately.
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I7486e548d356c5bd27261851f1f1bed620715e91
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fbcd7959e0fda595de91899ace7236037ac833d3
Original-Change-Id: Ib9df440bfa95cf06e8041491ecdb34c357047acd
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292664
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12613
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The script checks for a folder called documentation, while the folder
name is Documentation.
Without this change, I get this when running the script:
util/scripts/get_maintainer.pl: The current directory does not appear to be
a coreboot source tree.
Change-Id: Ied7ead7dfec33e9324f06d0ef60dcd6d7ba40104
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13062
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I thought we'd be using gnatmake but it's deprecated. Who needs it
anyway?
Change-Id: Ic08add72e771fa346c8a736ea901863ea5737d91
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13041
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add functionality to cbfstool to generate file attributes
for position and alignment constraints. This new feature
can be activated with the -g option and will generate,
once the option has been enabled, additional attributes
for the files where position, xip or alignment was specified.
Change-Id: I3db9bd2c20d26b168bc7f320362ed41be349ae3a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12967
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
These are generated from depthcharge's board/*/fmap.dts using the
dts-to-fmd.sh script.
One special case is google/veyron's chromeos.fmd, which is used for a
larger set of boards - no problem since the converted fmd was the same
for all of them.
Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT
region ends up at the beginning of flash). This becomes necessary
because we're working without a real cbfs master header (exists for
transition only), which carved out the space for the offset.
Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12715
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
cbfs_add calculated a base address out of the alignment specification
and stored it in param.baseaddress.
This worked when every cbfstool invocation only added a single file, but
with -r REGION1,REGION2,... multiple additions can happen.
In that case, the second (and later) additions would have both alignment
and baseaddress set, which isn't allowed, aborting the process.
Change-Id: I8c5a512dbe3c97e08c5bcd92b5541b58f65c63b3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13063
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The CBFS flag in fmd files isn't stored in the fmap, so allow storing it
out of band using the -R option.
Change-Id: I342772878d7f8ce350de1a32dc7b2a5b07d6617d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13058
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Somehow I lost a $ on headerlist between when I tested the script
and when I submitted it, turning headerlist into plain text instead
of a variable name. This makes the test always pass.
- Fix variable bug.
- exclude this script from the check.
- update test for empty HEADER_DIRS variable.
Change-Id: I6080c520bc741e9d689f7c66ee97879afc8ba38c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13057
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On Apple OS X, the ntohl and htonl need including header,
#include <arpa/inet.h>
Please refer the manpage for these command on OS X,
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man3/htonl.3.html
Change-Id: Ia942c58f34637c18222fbf985b93c48abf63c5b8
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/11672
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
cbfstool tries opening the input file for write access even if the
command does not require modifying the file.
Let's not request write access unless it is necessary, this way one
can examine write protected files without sudo.
BRANCH=none
BUG=none
TEST=running
cbfstool /build/<board>/firmware/image.bin print
in chroot does not require root access any more.
Change-Id: Ic4e4cc389b160da190e44a676808f5c4e6625567
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ef6a8e25d9e257d7de4cc6b94e510234fe20a56d
Original-Change-Id: I871f32f0662221ffbdb13bf0482cb285ec184d07
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/317300
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12931
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Split the script up to make it easier to update and read.
- Check for multiple different license strings. Not all files are GPL
licensed.
- Don't validate 0 length files
- Update list of files to exclude from the license header check.
- Add command line option to set directories to check
- Add stable version to check a few directories that are fixed. This
just calls the non-stable version with the directories to check.
Change-Id: I90d4e93a20b4e1638ce4f43f8acbee72dc588625
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12909
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Check that selected symbols are type bool
- Check that selected symbols aren't created inside a choice
- Check that symbols created inside a choice aren't created
outside of a choice as well.
Change-Id: I08963d637f8bdfb2413cfe831eafdc974d7674ab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12969
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I think these four methods should cover most operating systems,
with many supporting several of the methods.
If we don't find anything, we're not any worse off than we were before.
The big issue would be if we get an incorrect value.
Change-Id: I4a612d39e93173e9d6e0de892f5bebf716912b1a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12937
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Help prevent additional files coming in to the tree with the old
license header.
Change-Id: Idbafc2d8c05f87075083293d27900304c53e13dc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12920
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I tried to handle the checking for the config flag internal to xcompile,
but the config flags don't appear to have been loaded into the
environment by make at that point.
This does update the if to check if the flag is even set before putting
anything into .xcompile though. If the LDFLAG isn't set, there's no
point in appending anything.
Also removes the LP version of the erratum config flag, which was a
copy/paste mistake from $(CONFIG_LP_COMPILER_GCC).
Change-Id: I3d8b0328c85310393a120741a498bc18867a6f54
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12858
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of looking for an FMAP at every byte, only search down
to a granularity of 16 bytes, reducing the time for a cbfstool
call by 0.3s when no FMAP is found.
Signed-off-by: Stefan Reinauner <reinauer@chromium.org>
BUG=none
BRANCH=none
TEST=time ./cbfstool coreboot.rom add -f locale_de.bin -n locale_de.bin -t 0x50 -c lzma
is 0.3s faster than before.
Change-Id: Icb4937330e920ae09928ceda7c1af6a3c5130ac7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc92d838ba9db7733870ea6e8423fa4fa41bf8fe
Original-Change-Id: Idbaec58a199df93bdc10e883c56675b419ab5b8e
Original-Reviewed-on: https://chromium-review.googlesource.com/317321
Original-Commit-Ready: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/12932
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In parse_elf_to_stage(), it uses 32-bit variable to handle address.
The correct address type is Elf64_Addr. Use uint64_t to prevent address
to be truncated.
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I1abcd16899a69b18dd10e9678e767b0564b2846e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ebc1aae0ae4ca30802a80a4a4e2ae0c0dad4d88a
Original-Change-Id: I21f8057ddf13e442f1cf55da6702c3449ba0cc35
Original-Reviewed-on: https://chromium-review.googlesource.com/292553
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12927
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
hashcbfs was spliced in a line early, mixing up 'extract' and 'cbfshash'
help texts.
Change-Id: I86d4edb9eec0685a290b2dd4c2dc45d3611eba9a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12922
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The license text that we decided to remove was removed from the headers
of these files, but was still left in the help text. Remove it from
those locations as well.
Change-Id: I0e1b3b79f1afa35e632c4a4dd09a8bf2b02eaa6d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12913
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This continues what was done in commit a73b93157f
(tree: drop last paragraph of GPL copyright header)
Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12914
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove duplicate line which sets baseaddress parameter.
Change-Id: Idfbb0297e413344be892fa1ecc676a64d20352bf
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12904
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The lint target in the makefile relies there being a script using
this particular naming format, so add a shell script front end to
run the kconfig linter.
Change-Id: I029c1cd3bbf3837c9f1d86c391ae5cabfa53685d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12903
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Checkpatch should be 007.
Change-Id: Ib71c50ad1a63a3a743391cd8fea9f79cd08ef6f3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12901
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of printing out a single tool that needs to be installed
each time buildgcc is run, print out the entire list of tools
to be installed, then halt.
Change-Id: I7761760eef3c45ba371f882a4f987408945bb3e5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12856
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Previously, when we tested for g++ and two different versions of clang,
if the earlier versions were not found, buildgcc would still request
that they be installed. This obviously isn't needed, and isn't the
desired outcome.
Now, if one of the first tests fails, nothing gets printed. If all
the tests fail, it tells you to install either g++ or clang.
Change-Id: I71359f59c4c6bee3c3c55e4e6105f11e6ca51527
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12852
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Quoting variables prevents word splitting and glob expansion, and
prevents the script from breaking when input contains spaces, line
feeds, glob characters and such.
See shellcheck warning SC2086
Change-Id: Ib6ca46b64a621c4bea5c33ac312f2824b0386235
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12845
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Using the local variables instead of positional parameters helps
readability.
- Add and use the local variables in testcc.
- Use the existing local variables in testld.
Change-Id: Ice13288b830a7aa043b360eaee8e36f060589a18
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12844
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
While the backtick syntax isn't actually deprecated, the $() syntax
is preferred. Since both styles were being used in this script, settle
on the new standard for all cases.
Change-Id: I33770d666781b4fa34c909411e0d220c2540dbb4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12843
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Clean up the output file a bit by only including the erratum
for arm64 into the that architecture section instead of
every architecture.
Change-Id: Ib6276f12aee5deb92a03e1c4fa2ad57db46bdc8f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12842
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to be able to check the compiler versions, we need to be
able to access the compiler variables. Move the original assignments
outside of the GCC check, and assign either the GCC or CLANG compiler
to the actual CC_ environment variable later. This ends up with the
same value set, while allowing the compiler versions to be checked.
Change-Id: Iffad02d526420ebbdfb15ed45eb51187caaa94fb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12841
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We already have a CFLAGS variable - Use it for all of the flags.
Change-Id: I22b4c5cf24b8743e85ffab29ddcccdc6c732ea3b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12840
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The XGCCPATH prefix is on all the other tools and compilers,
so add it to clang as well, so it can be found correctly.
Change-Id: Ibc250a81433f37bbb0555d32605aebe3a68aaf40
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12839
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add bar at the top of each architecture
- Make the architecture name and the TARCH_SEARCH to two lines
- Add a second line at the bottom of each architecture
- Add a comment about the two blank lines so they don't get
accidentally removed.
Change-Id: Ib4326bd94fe39b979244816ce54b752d083f6b16
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12838
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I96a5048050f8016c3c569f20318b4d421a4470a7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12837
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This reverts commit 68d0e4a5a1.
Special handling of MPFR is no longer needed with the latest
MPFR release.
Change-Id: I96d9ea92cfb74eed6af2ba62254f0678081e2b4f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12833
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The current MPFR version contains a stale config.guess file
that requires special handling on ppc64el systems. Bump
the MPFR version to the latest release.
Change-Id: I5e86c732c09f8a6a43f9812452124d64d337ea3f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12832
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested on C3/EPIA board and Linux x86
Change-Id: I8df551f4b385ee8702af78df00169bdc8e180925
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12851
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The cbfs master header's offset and romsize fields are absolute values
within the boot media proper. Therefore, when adding a master header
provide the offset of the CBFS region one is operating on as well as
the absolute end offset (romsize) to match expectations.
Built with and without CBFS_SIZE != ROM_SIZE on x86 and ARM device. Manually
inspected the master headers within the images to confirm proper caclulations.
Change-Id: Id0623fd713ee7a481ce3326f4770c81beda20f64
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12825
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
For the purposes of maintaining integrity of a CBFS allow one to
hash a CBFS over a given region. The hash consists of all file
metadata and non-empty file data. The resulting digest is saved
to the requested destination region.
BUG=chrome-os-partner:48412
BUG=chromium:445938
BRANCH=None
TEST=Integrated with glados chrome os build. vboot verification
works using the same code to generate the hash in the tooling
as well as at runtime on the board in question.
Change-Id: Ib0d6bf668ffd6618f5f73e1217bdef404074dbfc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12790
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Adding new files overwrote the header with the empty file (ie 0xff),
so carve out some space.
BUG=chromium:445938
BRANCH=none
TEST=none
Change-Id: I91c292df381c2bac41c6cb9dda74dae99defd81d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/12789
Tested-by: build bot (Jenkins)
These need to go together, so the commit became a bit larger than
typial.
- Add an option -R for the copy source fmap region.
Use: cbfstool copy -r target-region -R source-region.
- Don't generate a CBFS master header because for fmap regions, we
assume that the region starts with a file header.
Use cbfstool add-master-header to add it afterwards, if necessary.
- Don't copy files of type "cbfs master header" (which are what cbfstool
add-master-header creates)
- Leave room for the master header pointer
- Remove -D command line option as it's no longer used.
BUG=chromium:445938
BRANCH=none
TEST=Manual test on image and integration test w/ bundle_firmware
changes.
CQ-DEPEND=CL:313770,CL:313771
Change-Id: I2a11cda42caee96aa763f162b5f3bc11bb7992f9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12788
Tested-by: build bot (Jenkins)
This allows adding support for FMAP based cbfstool copy more easily.
BUG=chromium:445938
Change-Id: I72e7bc4da7d27853e324400f76f86136e3d8726e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/12787
Tested-by: build bot (Jenkins)
Let toolchain.inc error out when the architecture or tool is missing.
Change-Id: I39a51e5a2c778d6bbc50354807e5e2b717fa9e52
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12682
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The config.guess file included with MPFR is completely obsolete,
leading to build failures on ppc64el due to the system architecture
not being detected. Regenerate the files from the host system via
automake before attempting to build MPFR.
Change-Id: I00fc16003906e373d112c25978197ac907adccfd
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12816
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The previous official GMP release (6.0.0) contains a bug that
prevents compilation on ppc64el systems. Increase version
to the latest version (6.1.0).
Bug details:
gcc build on ppc64el fails with:
(.text+0x4c): undefined reference to `BMOD_1_TO_MOD_1_THRESHOLD'
While I don't have an exact commit hash due to Hg use upstream,
a missing BMOD_1_TO_MOD_1_THRESHOLD define on ppc64el was quietly
fixed in Hg before the 6.1.0 release.
Change-Id: I1c05a1c194141db5f8522148c2e20e7558d34714
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12811
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When coreboot is pulled in as a submodule, the .git "folder" is a file,
not a folder. Use the '-e' test instead of '-d' to allow for that.
Change-Id: I0dd8866b0016f7ba099cdaf4d7db442ff22612b5
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12819
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Using origin/master as the git revision breaks reproducibility, giving
different values depending on when the code was pulled from the
repo at coreboot.org. By using the current revision instead, we get
identical builds.
Change-Id: If4be6e048d6c8e417b8c074199745900ccd82b49
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12807
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
clang version now returns:
coreboot toolchain v1.33 November 25th, 2015 clang version 3.6.1
(tags/RELEASE_361/final) (based on LLVM 3.6.1)
Change-Id: I948d7f4d06c244987342cfc7d5c7e728cbed93bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12777
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Quoting variables prevents word splitting and glob expansion, and
prevents the script from breaking when input contains spaces, line
feeds, glob characters and such.
See shellcheck warning SC2086.
Change-Id: I7256d2fc2a22bce7723950a534fef6d57cbd097f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12761
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This allows users who build the rom from the board-status repo to
verify that their rom matches the original.
Change-Id: I4e8564e389495909219f92ccdafb8e9568f8f0d0
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12760
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Print what the script is doing so when it asks for the ssh password
several times in a row, it's obvious that it's actually doing different
things, not that the password failed.
- Don't print the output from cbfstool - it's not useful.
Change-Id: I785283475e14f242117682800c26db6b4f9f1e2c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12759
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If the payload_config and payload_version files are in coreboot.rom,
extract and save them.
Change-Id: I36b17ed189f94e2d4e873b0e219e5a9a2abe77a1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12758
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The old serial port read method lost characters from the boot log. This
method works better for me.
- Put get_serial_bootlog arguments into variable names for clarity.
- Fully configure the serial port with stty: disable parity and flow control.
- Change serial port read from reading with 'cat' to reading with 'read'.
- Update help to show current default speed from the variable.
tested under dash, bash, and zsh on several platfoms.
Change-Id: I91ae63a3c226e61019dbdf69c405c3f20ba7db54
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12757
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the coreboot toolchain version to iasl's version output.
% ./xgcc/bin/iasl -v
Intel ACPI Component Architecture
ASL+ Optimizing Compiler version 20150619-64
Copyright (c) 2000 - 2015 Intel Corporation
coreboot toolchain v1.33 November 25th, 2015
This won't actually be checked until the next version of
iasl so that we don't have to rebuild again for no reason.
The buildgcc version was intentionally not incremented for
this minor change.
Change-Id: I03a1a777fdb84e34bfceb7b1eb43fffbc1f3a2fc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12688
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The constant for ppc64 is 'hotstuff'. For many reasons.
Note that line 2894 of elf.h is not indented. This is because in the
original the line begins with a space. Checkpatch rejects that.
Checkpatch also rejects changing the space to a tab because that makes
it more than 80 chars. I rejected breaking the line because it makes it
even less readable. All the changes forced by checkpatch make the code
less readable.
Herman Hollerith would be proud.
Change-Id: I21f049fe8c655a30f17dff694b8f42789ad9efb7
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/12711
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
We still add a master header for compatibility purposes, and the default
layouts don't cover anything non-coreboot (eg. IFD regions) yet.
The default layouts can be overridden by specifying an fmd file, from
which the fmap is generated.
Future work:
- map IFD regions to fmap regions
- non-x86: build minimalistic trampolines that jump into the first cbfs
file, so the bootblock can be part of CBFS instead of reserving a
whole 64K for it.
- teach coreboot's cbfs code to work without the master header
- teach coreboot's cbfs code to work on different fmap regions
Change-Id: Id1085dcd5107cf0e02e8dc1e77dc0dd9497a819c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/11692
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The former interpretation sprung from the x86 way of doing things
(assuming top-alignment to 4GB). Extend the mechanism to work with CBFS
regions residing elsewhere.
It's compatible with x86 because the default region there resides at the
old location, so things fall in place. It also makes more complex
layouts and non-x86 layouts work with negative base addresses.
Change-Id: Ibcde973d85bad5d1195d657559f527695478f46c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12683
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
I didn't go back through the development guide for this.
But based on test, if the empty entry is filled as 0xFFFFFFFF,
instead of 0, the USB3 port can not be used.
Leave the entries of PSP and PSP2 as 0xFFFFFFFF to be compliant
with the case before the amdfwtool is used.
Change-Id: Icd5f9891e541279dbd551bbceaf091488d22bfef
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/12665
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Until there's a reason to, don't print a warning about the missing
power8 compiler.
Change-Id: I47c60e0a16892f0fa228e1439e0424926bca00a4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12634
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
The help text had gotten kind of sloppy. There was a missing newline
in the add-stage command, some of the lines were too long, etc.
Change-Id: If7bdc519ae062fb4ac6fc67e6b55af1e80eabe33
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12646
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
- Including the help targets in the list of NOCOMPILE targets means they
can run even if the toolchain is mucked up. Since they contain info on
building the toolchin, this is useful.
- Separate the three current parts of the help target into individual
components: help_coreboot, help_toolchain, and help_kconfig. This is
mostly for the help_toolchin target which will be printed out by
toolchain.inc.
Change-Id: I365d95fd63e22bddd122fb1fede6f04270e03d63
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12542
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
power8 is set up by ibm as a powerpc subset, so we follow
that rule here: we call it a powerpc but require -mcpu=power8
Change-Id: Ib5212be22db9584b0dc0eeed5c06ec1924347067
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/12624
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
ERROR: code indent should use tabs where possible
+^I trampoline_len);$
Change-Id: If46f977e2e07d73e6cfd3038912a172236a7e571
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12620
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It's not needed, so we can remove some extra file mangling, too.
Change-Id: I80d707708e70c07a29653258b4cb6e9cd88d3de3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12508
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add the code necessary to create the linux trampoline blob.
Don't enforce this for the in-coreboot build or use objcopy
to produce linux_trampoline.o as it is a bit trickier to get
all the details right than I had hoped:
- you have to know the elf architecture of the host machine
- you might have to have more tools (xxd, perl, etc) installed
Change-Id: I9b7877c58d90f9fb21d16e0061a31e19fffa2470
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12505
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The existing code used a stale pointer from a previously unmapped
region of memory when parsing the coreboot tables. Use the correct
pointer from the currently mapped memory region when parsing.
Change-Id: Id9a1c70655fe25bc079e5bee55f15adf674694f8
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12619
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The previous code would miss the first of two IS_ENABLED(CONFIG_symbol)
sequences on a line. This patch saves the rest of the line and loops
to check any other entries on the same line of text.
Change-Id: If4e66d5b393cc5703a502887e18f0ac11adff012
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12562
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Combine the file and line number into a combination that editors
understand when opening files. This makes it easier to edit the
errors.
Change-Id: Id2fae6a0a2ca8d726b95e252d80ac918f4edbe23
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12561
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Create subroutines for printing warnings and errors
- Change all the existing warning and error routines to use subroutines
- Add new command line options to suppress errors and to print notes
Change-Id: I04893faffca21c5bb7b51be920cca4620dc283c3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12555
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
By adding the version number of tools, we can help people keep up to
date with their tool versions. This will be used now to determine
whether the IASL version being used is the version supported by
coreboot.
Change-Id: I24a68b01c819871f90403869570125e71b96bd70
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12545
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Mingw doesn't have that this function.
Change-Id: I640ea61ff24fba812e3f10771dd7e468dcfc63dd
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/11724
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This makes the make process look like the one inside
of coreboot's build system.
Change-Id: I48be2df39cad47644e16ce583b27c33a1da81fc3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12509
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
PSP2 is for Combo BIOS, which is the idea that one image supports 2
kinds of APU.
The PSP2 feature is for the future, not for current products.
The newest document about PSP2 is not available. I made it from the
draft code I made when I was in AMD.
Change-Id: I65328db197c02ee67f3e99faf4ab8acabd339657
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/12474
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Currently running 'make help' just gives help for the kconfig targets.
This adds help for common coreboot and toolchain targets. It stops
printing some of the less common kconfig targets, but still leaves
them in the makefile as documentation.
Change-Id: I2a00fcbc06f05dc4029a91f3dff830c19e4d1329
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12458
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
mma_setup_test.sh is used to set MMA test name and MMA test config
name. After executing this script user needs to reboot the system and
FSP/coreboot would execute the selected MMA test. FSP and coreboot needs
to be built with MMA support.
mma_get_result.sh will get the raw MMA results from cbtable and save it
to bin file.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB3).
CQ-DEPEND=CL:299476,CL:299475,CL:299474,CL:299509,CL:299508,CL:299507,CL:*230478,CL:*230479
Change-Id: Ie330151535809676167f0b22c504a71975841414
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35469218fe53c1ac211f55bd26a206a05a827453
Original-Change-Id: I7d20aca63982e13edc41be2726f3cc7e41d95bae
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/299473
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: http://review.coreboot.org/12483
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Changed following things,
(1) cbmem -l would give both ID and Name for coreboot table along with
START and LENGTH of each entry
e.g.
localhost ~ # cbmem -l
CBMEM table of contents:
NAME ID START LENGTH
<.....>
3. TIME STAMP 54494d45 77ddd000 000002e0
4. MRC DATA 4d524344 77ddb000 00001880
5. ROMSTG STCK 90357ac4 77dd6000 00005000
6. VBOOT WORK 78007343 77dd2000 00004000
7. VBOOT 780074f0 77dd1000 00000c3c
8. RAMSTAGE 9a357a9e 77d13000 000be000
9. REFCODE 04efc0de 77c01000 00112000
10. ACPI GNVS 474e5653 77c00000 00001000
11. SMM BACKUP 07e9acee 77bf0000 00010000
<..etc..>
(2) With this patch, new command line arg "rawdump" or "-r" will be
added to cbmem
user can grab the ID with "cbmem -l" and execute "cbmem -r <ID>" to get
raw dump of cbtable for the <ID> in interest.
This change is needed to get MMA results data from cbtable. Coreboot
stores the MMA results in cbmem. Separate post processing scripts uses
cbmem utility to get the these data.
This feature in the cbmem tool can also help debugging some issues where
some specific ID of cbtable needs examination.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB3). Cbmem -r and -l works as described.
Not tested on Glados
CQ-DEPEND=CL:299476,CL:299475,CL:299473,CL:299509,CL:299508,CL:299507,CL:*230478,CL:*230479
Change-Id: I70ba148113b4e918646b99997a9074300a9c7876
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f60c79d845d4d4afca480b6884c564a0d5e5caf8
Original-Change-Id: I1dde50856f0aa8d4cdd3ecf013bd58d37d76eb72
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/299474
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: http://review.coreboot.org/12482
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Building cbmem with ASan
$ CC=gcc-5 CFLAGS="-O1 -g -fsanitize=address -fno-omit-frame-pointer" LDFLAGS="-fsanitize=address" make
it sometimes finds a heap-buffer-overflow, while dumping the CBMEM
console.
$ sudo ./cbmem -c
=================================================================
==11208==ERROR: AddressSanitizer: heap-buffer-overflow on address 0xb5d5782b at pc 0x0804a4d7 bp 0xbfe23bc8 sp 0xbfe23bbc
WRITE of size 1 at 0xb5d5782b thread T0
#0 0x804a4d6 in dump_console /home/joey/src/coreboot/util/cbmem/cbmem.c:553
#1 0x804a4d6 in main /home/joey/src/coreboot/util/cbmem/cbmem.c:1134
#2 0xb70a3a62 in __libc_start_main (/lib/i386-linux-gnu/i686/cmov/libc.so.6+0x19a62)
#3 0x8048cf0 (/home/joey/src/coreboot/util/cbmem/cbmem+0x8048cf0)
0xb5d5782b is located 50 bytes to the right of 131065-byte region [0xb5d37800,0xb5d577f9)
allocated by thread T0 here:
#0 0xb72c64ce in __interceptor_malloc (/usr/lib/i386-linux-gnu/libasan.so.2+0x924ce)
#1 0x804a407 in dump_console /home/joey/src/coreboot/util/cbmem/cbmem.c:542
#2 0x804a407 in main /home/joey/src/coreboot/util/cbmem/cbmem.c:1134
#3 0xb70a3a62 in __libc_start_main (/lib/i386-linux-gnu/i686/cmov/libc.so.6+0x19a62)
SUMMARY: AddressSanitizer: heap-buffer-overflow /home/joey/src/coreboot/util/cbmem/cbmem.c:553 dump_console
Shadow bytes around the buggy address:
0x36baaeb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x36baaec0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x36baaed0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x36baaee0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x36baaef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
=>0x36baaf00: fa fa fa fa fa[fa]fa fa fa fa fa fa fa fa fa fa
0x36baaf10: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x36baaf20: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x36baaf30: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x36baaf40: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x36baaf50: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Heap right redzone: fb
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack partial redzone: f4
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
==11208==ABORTING
Fix up commit 06b13a37 (cbmem: Terminate the cbmem console at the cursor
position.) by reverting setting the cursor to 0.
Change-Id: Id614a8e0f1a202671dd091f825d826a17176bfcc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10572
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Bail out if .xcompile is incomplete or can't be regenerated.
Change-Id: I74adeded7a3e849b25bf65c5b02f67820f29c7e2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12477
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
On system with clang, "as" is available but "objdump" is not by default.
So if ${gccprefix} is empty, "as" can run successfully and the "objdump"
below might report error. Mask that output.
Change-Id: I9940f069f66e097973ed6138cf3c696087fa5531
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11681
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The second parameter is to set file permissions for the directory, which
is not needed in mingw.
Change-Id: I88e317f075e8a39f0a280b3dd6e597d119f0f741
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11723
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
If HOSTCC=clang, the -Wtautological-constant-out-of-range-compare is
set automaticaaly. That assume the value of type enum is in the defined
range. Then testing if a type enum is out of range causes build error.
Error:
coreboot/util/cbfstool/cbfs_image.c:1387:16: error:
comparison of constant 4 with expression of type 'enum vb2_hash_algorithm'
is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (hash_type >= CBFS_NUM_SUPPORTED_HASHES)
~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
clang version:
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
Target: x86_64-unknown-freebsd10.2
Thread model: posix
Change-Id: I3e1722bf6f9553793a9f0c7f4e790706b6938522
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12330
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This models gcc's (and other compilers') behavior to not bail
out with an error when one of the include paths does not exist.
Change-Id: Ic93a55cea6b32516fd76da9b49abe7b990829889
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12469
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
- Only build IASL once for the 'all' targets instead of once for each.
- Change the control of what gets built from different targets to
variables on the build line.
- Clean up and correct the list of phony targets
- Don't keep the temporary files around while building all. This
takes up a lot of space. If it's desired behavior, add
BUILDGCC_OPTIONS=-t on the make command line.
- Add comments about CPU= and BUILDGCC_OPTIONS= variables
- Add KEEP_SOURCES option
Change-Id: I7752974e249f25717b42be25a841c69af84d5c69
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12300
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Otherwise </testsuite> is missing and jenkins can't make sense of
things.
Change-Id: If11a6d2506efc9d7c915f50896b2714bc66e3b65
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12478
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The function fletcher is moved to amdfwtool.
Change-Id: I39eb05a184d8878a96f8de46caf4b5c6c433dc3a
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12455
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Combine all needed AMD firmware into one single firmware, which going to
be added as one single CBFS module.
Change-Id: Ib044098c1837592b8f7e9c6a7da4ba3a32117e25
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12419
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's not deprecated if it's still in active use. The code layout is just
"funny" (and could warrant a chipset-side cleanup, but not today)
Change-Id: I5f7776ceba0134f20364a0c4a1ca51382e9877e2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12429
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
When using FMAP regions (with option -r) that were generated with a
master header (as done by cbfstool copy, eg. in Chrome OS' build
system), there were differences in interpretation of the master header's
fields.
Normalize for that by not sanity-checking the master header's size field
(there are enough other tests) and by dealing with region offsets
properly.
BUG=chromium:445938
BRANCH=tot
TEST=`cbfstool /build/veyron_minnie/firmware/image.dev.bin print -r
FW_MAIN_A` shows that region's directory (instead of claiming that
there's no CBFS at all, or showing an empty directory).
Change-Id: Ia840c823739d4ca144a7f861573d6d1b4113d799
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0e5364d291f45e4705e83c0331e128e35ab226d3
Original-Change-Id: Ie28edbf55ec56b7c78160000290ef3c57fda0f0e
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312210
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12416
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is required to handle certain relative-to-flash-start offsets.
BUG=none
BRANCH=tot
TEST=none
Change-Id: I8b30c7b532e330af5db4b8ed65b21774c6cbbd25
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 596ba1aaa62aedb2b214ca55444e3068b9cb1044
Original-Change-Id: Idc9a5279f16951befec4d84aab35117988f7edb7
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312220
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12415
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This script generates the rough format for the release notes, and will
add new commits to the top of an existing release notes text file. At
that point, a lot still needs to be done by hand - deciding which
commits deserve to be in the release notes, and which don't.
When updating the existing release notes, The updates are just added
to the top of the file, and need to be placed manually. This just
helps prevent missed commits.
When editing the release notes, don't delete or modify the commit id
lines after they've been classified - Just move them to the bottom of
the file until the notes are ready to publish. This keeps those commits
from re-appearing at the top of the file the next time the script is run
to update the notes.
Change-Id: I0a699c528117f0347a65a3bed4402f3a57309e3c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12318
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This is an update to the script in the blobs repo that converts
individual or multiple files into a microcode binary.
Change-Id: I66fb650bbfa334d1f07e8e3914ef6deb8e72bbb4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12332
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
On mingw, the function glob has some default options
which are not compliant with man page.
If gl_offs is not set as 0, there may be some slots which
is reserved.
If gl_pathc or gl_pathv is not set as 0, the result might
be appended to the list instead of being added as new ones.
Change-Id: I03110c4cdda70578828d6499262a085a81d26313
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11711
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
The buildgcc makefile was using the variable 'BUILDJOBS' to pass the
number of cores to use for the build into buildgcc. This is changed
to 'CPUS' to match the variable name for the what-jenkins-does target.
Change-Id: I373c4988e9f096ca2e142afdd5e94d7d806891e3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12299
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The cbmem utility shouldn't be using the intra coreboot
data structures for obtaining the produced data/information.
Instead use the newly added cbmem records in the coreboot
tables for pulling out the data one wants by using the
generic indexing of coreboot table entries.
BUG=chrome-os-partner:43731
BRANCH=None
TEST=Interrogated cbmem table of contents with updated code.
Change-Id: I51bca7d34baf3b3a856cd5e585c8d5e3d8af1d1c
Reviewed-on: http://review.coreboot.org/11758
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Show laptops and servers before desktop boards since that's where both
the market and coreboot are the most active these days.
Change-Id: I7de63975f3f2ff5e983b19e07558175a58870a1b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12292
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
There's the sentiment that the Supported_Motherboards wiki page is
outdated. Point out that the list is current (and drop the table of
contents that became a distraction).
Change-Id: Ib2363fad0b7f6951b07b2ad0c85148d9bc729b55
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12291
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
abuild -t EMULATION_QEMU_UCB_RISCV,EMULATION_SPIKE_UCB_RISCV works now
Change-Id: I49d8cd86e21ede724d8daa441b728efa1f6ea1fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12281
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
junit reports were kept around (and appended to) in some cases, leading
to duplicate reports on jenkins.
Drop old per-mainboard reports before building said boards, and do the
same for the tools (reported thrice).
Change-Id: I74a035587bbf917dca85ba6fc74621c583efe9a2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12280
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Specifying a directory with multiple boards (eg abuild -t google/veyron)
makes abuild run through all of them.
Change-Id: Ifb60f3a1f0c4a727dc43c48671ea90711ffe5585
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12278
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Since we now have multiple boards in a single mainboard directory (eg
google/veyron), we need some other identifier from which to create
output directories and filenames in abuild than the directory name.
Use the wildcard part of CONFIG_BOARD_* instead.
This changes the semantics of payload.sh handling: it's passed the
single new identifier instead of two arguments "vendor" and "board" that
constitute the mainboard directory's path.
Change-Id: I0dc59c6a1ad1ee51d393fa06b98944a6da342cdf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12277
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It only takes a single argument now, which is the directory below the
coreboot-builds directory. Preparation for future work.
The only visible change is in console output.
Change-Id: I4b0fe268ccfb69a0403fa5f8b23444c07843386f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12276
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's passed the mainboard's directory name (below $TARGET) directly
in preparation of more rework in that area.
Change-Id: I3a82b8673fdea07bc5c957f76f4685c34a805334
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12275
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Its hardcoded HTTP endpoint is gone since 2007.
Change-Id: Ib76814d31b571456d950d45f45912036b6fa82d1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12274
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
If you already have a configuration, there's no need to run it through
abuild.
Change-Id: I4dde9a7b96bb0c08ec5c91426a4dd3aa15e74edf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12273
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
checkpatch.pl that we inherited from Linux checks for its absence, so it
may be easiest to follow their style of not caring for the FSF's address
anymore.
TEST=visual check that `git diff` and `git diff |grep "^[+-]" | \
grep -v "^--- " |grep -v "^+++ " |sort | uniq -c |sort -n` look
reasonable (matching number of removed and added comment terminators */,
etc.).
Also, `git grep -A3 "You should have received a copy"` only
returns license texts, imported files, patches and help strings in
applications as remaining copies of that paragraph
Change-Id: I7c43860b6fd7ec526983c24b608994539128cfb9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11887
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Those may collide with strings.h's index(), included transitively
through system headers.
Change-Id: I6b03236844509ea85cfcdc0a37acf1df97d4c5f3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12279
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This timestamp marks that EC verification has completed.
BUG=chromium:537269
TEST=Run cbmem on glados, verify "1030:finished EC verification" is
seen.
BRANCH=None
Change-Id: I0114febae689584ec8b12c169e70f2d3995d8d4d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: deeb2ab8085e5ea0a180633eb8fb1c86aadffe94
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: I4f09e970ffedc967c82e6283973cbbcb2fbe037f
Original-Reviewed-on: https://chromium-review.googlesource.com/309280
Original-Commit-Ready: Shawn N <shawnn@chromium.org>
Original-Tested-by: Shawn N <shawnn@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12230
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: build bot (Jenkins)
Mostly a proof of concept for adding fuzzing to our tree.
Change-Id: I10e5ef3a426b9c74c288d7232a6d11a1ca59833b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/12183
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This is a tool to help identify issues in coreboot's Kconfig structure
and in how the Kconfig symbols are used in the coreboot codebase.
It identifies a number of issues:
- #ifdef used on Kconfig symbol of type bool, hex, or int. These are
always defined.
- #define CONFIG_ in the coreboot code - these should be reserved
for Kconfig symbols.
- Redefinition of Kconfig symbols in the code.
- Use of IS_ENABLED() on non-bool kconfig symbols.
- Use of IS_ENABLED() on values that are not kconfig symbols.
- Attempts to find default values that will not set anything
because of earlier default settings. This needs to be expanded
significantly.
- Kconfig expressions using symbols which are not defined.
- Kconfig symbols that are defined but not used anywhere in the
Kconfig structure or coreboot code.
- Kconfig keywords used incorrectly.
- Whitespace issues
- Kconfig 'source' keyword issues
-- sourcing non-existant directories
-- sourcing Kconfig files multiple times
-- sourcing non-existent files
-- Kconfig files in the codebase that are never sourced
Additionally, it can be used to help debug the Kconfig tree
by putting all the files together into a single file with
their source locations listed.
Run from the coreboot directory:
util/lint/kconfig_lint
Change-Id: Ia53b366461698d949f17502e99265c1f3f3b1443
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12088
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With the previous ELF stage extract support the resulting
ELF files wouldn't handle rmodules correctly in that the
rmodule header as well as the relocations were a part of
the program proper. Instead, try an initial pass at
converting the stage as if it was an rmodule first. If it
doesn't work fall back on the normal ELF extraction.
TEST=Pulled an rmodule out of Chrome OS shellball. Manually
matched up the metadata and relocations.
Change-Id: Iaf222f92d145116ca4dfaa955fb7278e583161f2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12222
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In order to convert rmodules back into ELF files one needs
to add in the relocations so they can be converted back to
rmodules. Because of that requirement symbol tables need
to be present because the relocations reference the symbols.
Additionally, symbol tables reference a string table for the
symbol names. Provide the necessary support for adding all
of those things to an ELF writer.
TEST=Extracted rmodule from a cbfs and compared with the
source ELF file. Confirmed relocations and code sizes
are correct.
Change-Id: I07e87a30b3371ddedabcfc682046e3db8c956ff2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12221
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Instead of creating a loadable segment for each section with
SHF_ALLOC flag merge those sections into a single program
segment. This makes more tidy readelf, but it also allows
one to extract an rmodule into an ELF and turn it back into
an rmodule.
TEST=Extracted both regular stages and rmodule stages. Compared
against original ELF files prior to cbfs insert.
Change-Id: I0a600d2e9db5ee6c11278d8ad673caab1af6c759
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12220
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Instead of dumping the raw stage data when cbfstool
extract is used on stage create an equivalent ELF file.
Because there isn't a lot of information within a stage
file only a rudimentary ELF can be created.
Note: this will break Chrome OS' current usage of extract
since the file is no longer a cbfs_stage. It's an ELF file.
TEST=Extracted romstage from rom.
Change-Id: I8d24a7fa4c5717e4bbba5963139d0d9af4ef8f52
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12219
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In order for one to extract ELF files from cbfs it's
helpful to have common code which creates a default
executable ELF header for the provided constraints.
BUG=None
TEST=With follow up patch am able to extract out romstage
as an ELF file.
Change-Id: Ib8f2456f41b79c6c0430861e33e8b909725013f1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12218
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In order to prepare allowing for one to extract a stage
into an ELF file provide an optional -m ARCH option. This
allows one to indicate to cbfstool what architecture type
the ELF file should be in.
Longer term each stage and payload will have an attribute
associated with it which indicates the attributes of
the executable.
Change-Id: Id190c9719908afa85d5a3b2404ff818009eabb4c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12217
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In order to actually do something useful with the
resulting file after being extracted decompress stage
files' content. That way one can interrogate the
resulting file w/o having to decompress on the fly.
Note: This change will cause an unexpected change to
Chrome OS devices which package up individual stage
files in the RW slots w/o using cbfs. The result will
be that compressed stages are now decompressed.
Longer term is to turn these files into proper ELF
files on the way out.
Change-Id: I373ecc7b924ea21af8d891a8cb8f01fd64467360
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12174
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This utility links in coreboot code, and has been broken for a while
again after removing some hacks from coreboot. I hadn't realized how
bad it was broken last time, and since most of this stuff is still
in a pretty bad shape, I decided to throw all of the changes together.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: If3e4399b1b0e947433b97caa29962ef66ea2993d
Reviewed-on: http://review.coreboot.org/11736
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Currently cbfs stage files that are compressed do not have
the decompressed size readily available. Therefore there's
no good way to know actual size of data after it is
decompressed. Optionally return the decompressed data size
if requested.
Change-Id: If371753d28d0ff512118d8bc06fdd48f4a0aeae7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12173
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If one wants to use buffer_init() for initializing a
struct buffer all the fields should be initialized.
Change-Id: I791c90a406301d662fd333c5b65b2e35c934d0f7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12172
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Have clean remove junit.xml files.
- Remove junit.xml target from cbmem makefile - this is in the top
level Makefile.inc now.
- add distclean targets to makefiles.
- Make sure all makefiles have .PHONY set up.
- rm commands need -f or they will fail if the file they're trying
to remove doesn't exist, causing the build to fail.
Change-Id: I2f0635f2c0a9417e3377a90c8d67103323c4a72f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12120
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add minimal Makefile based on cbmem’s Makefile.
The make target `junit.xml` is removed as this is handled differently
since commit de9adebb (Add junit.xml code to top Makefile.inc instead of
utils).
Also the `junit.xml` is removed in the make target `clean`.
Additionally, the make target `distclean` is added, as the current
junit.xml code in the top `Makefile.inc` requires that.
Change-Id: I164b1f7733505bca6248d0711d7ad71d635fa926
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11876
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This patch fixes compilation of cbfstool on Cygwin.
As reported in http://review.coreboot.org/#/c/10027
cbfstool on Cygwin likes to be compiled with -D_GNU_SOURCE.
That patch was abandoned because it would unwantedly turn on
more GNU extensions. Instead of doing that, only enable the
define on Cygwin, switch to -std=gnu99 instead of -std=c99 to
make fileno and strdup actually available.
A MINGW32 check that was forgotten in Makefile was copied over
from Makefile.inc to keep the two files in sync.
This patch has no impact on non-Windows builds.
Change-Id: I068b181d67daf9c7280110e64aefb634aa20c69b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11667
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
This utility should make it easier to complete and maintain
the database of coreboot subsystem maintainers (MAINTAINERS
file)
This will need a bit of tender love and care to print information
in an easily machine readable output for the build system, but its
a first start to query the maintainers database.
Build with:
$ go build util/scripts/maintainers.go
Find a maintainer for a set of files with:
$ ./maintainers Makefile Makefile.inc
Makefile is in subsystem BUILD SYSTEM
Maintainers: [Patrick Georgi <patrick@georgi-clan.de>]
Makefile.inc is in subsystem BUILD SYSTEM
Maintainers: [Patrick Georgi <patrick@georgi-clan.de>]
Check the maintainer database with:
$ ./maintainers
.gitignore has no subsystem defined in MAINTAINERS
.gitmodules has no subsystem defined in MAINTAINERS
.gitreview has no subsystem defined in MAINTAINERS
3rdparty/arm-trusted-firmware has no subsystem defined in MAINTAINERS
3rdparty/blobs has no subsystem defined in MAINTAINERS
3rdparty/vboot has no subsystem defined in MAINTAINERS
COPYING has no subsystem defined in MAINTAINERS
Documentation/AMD-S3.txt has no subsystem defined in MAINTAINERS
Documentation/CorebootBuildingGuide.tex has no subsystem defined in MAINTAINERS
Documentation/Doxyfile.coreboot has no subsystem defined in MAINTAINERS
[..]
Change-Id: I49c43911971152b0e4d626ccdeb33c088e362695
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12119
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Cygwin complains:
cbfstool.c: 1075:5 error: array subscript has type 'char' [-Werror=char-subscripts]
so add an explicit cast.
Change-Id: Ie89153518d6af2bacce3f48fc7952fee17a688dd
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11666
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Those are actually board specific. Keep the old value as defaults,
though. The defaults are included by all affected boards.
Change-Id: Ib865c7b4274f2ea3181a89fc52701b740f9bab7d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11705
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Please don't remove chipsets and mainboards without discussion and input
from the owners. Someone was asking about cougar canyon 2 just a couple
of weeks ago - there's obviously still interest.
This reverts commit fb50124d22.
Change-Id: Icd7dcea21fa4a7808b25bb8727020701aeebffc9
Signed-off-by: Martin Roth <martinroth@google.com>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/12128
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently, cbfstool regressed that removing a file from CBFS the space
is marked as empty but the filename is still shown, preventing adding a
file with the same name again. [1]
```
$ echo a > a
$ echo b > b
$ ./util/cbfstool/cbfstool test.rom create -m x86 -s 1024
Created CBFS (capacity = 920 bytes)
$ ./util/cbfstool/cbfstool test.rom add -f a -n a -t raw
$ ./util/cbfstool/cbfstool test.rom add -f b -n b -t raw
$ cp test.rom test.rom.original
$ ./util/cbfstool/cbfstool test.rom remove -n
$ diff -up <(hexdump -C test.rom.original) <(hexdump -C test.rom)
--- /dev/fd/63 2015-08-07 08:43:42.118430961 -0500
+++ /dev/fd/62 2015-08-07 08:43:42.114430961 -0500
@@ -1,4 +1,4 @@
-00000000 4c 41 52 43 48 49 56 45 00 00 00 02 00 00 00 50 |LARCHIVE.......P|
+00000000 4c 41 52 43 48 49 56 45 00 00 00 02 ff ff ff ff |LARCHIVE........|
00000010 00 00 00 00 00 00 00 28 61 00 00 00 00 00 00 00 |.......(a.......|
00000020 00 00 00 00 00 00 00 00 61 0a ff ff ff ff ff ff |........a.......|
00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
$ ./util/cbfstool/cbfstool test.rom add -f c -n c -t raw
$ ./util/cbfstool/cbfstool test.rom print
test.rom: 1 kB, bootblocksize 0, romsize 1024, offset 0x0
alignment: 64 bytes, architecture: x86
Name Offset Type Size
c 0x0 raw 2
b 0x40 raw 2
(empty) 0x80 null 792
```
So it is “deteled” as the type changed. But the name was not changed to
match the *(empty)* heuristic.
So also adapt the name when removing a file by writing a null byte to
the beginning of the name, so that the heuristic works. (Though remove
doesn't really clear contents.)
```
$ ./util/cbfstool/cbfstool test.rom remove -n c
$ ./util/cbfstool/cbfstool test.rom print
test.rom: 1 kB, bootblocksize 0, romsize 1024, offset 0x0
alignment: 64 bytes, architecture: x86
Name Offset Type Size
(empty) 0x0 null 2
b 0x40 raw 2
(empty) 0x80 null 792
```
[1] http://www.coreboot.org/pipermail/coreboot/2015-August/080201.html
Change-Id: I033456ab10e3e1b402ac2374f3a887cefd3e5abf
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11632
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
When the script was pulled out of the makefile, it was left as it was
written in the makefile to show the continuity with the original. This
patch cleans up issues identified by shellcheck and adds comments.
Change-Id: I5e6573a4fdfbb397e15db38e2e3dfadeb3430573
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11931
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
To add lint to jenkins testing, we need junit.xml output. This adds an
optional --junit command line parameter to enable output to an xml file
in the lint directory.
Change-Id: I5588190cb050b9dbe99458cb18a71a147769f50e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11891
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In preparation for adding junit xml to the lint tests, move the
script out of Makefile.inc and into its own file.
Add a copyright, usage, and error checking that was not needed
inside the Makefile.
Change-Id: I32bebc6a5f1f6fa652812c8a014d84006e2e6c8a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11890
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The 'what-jenkins-does' makefile target was renaming the junit filename
after abuild finished. Instead, just add a command line parameter to
send it to a different filename.
Change-Id: I66f7d80d621573d77a5154f36f2db49d7b2e948a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11878
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This chip is still being used and should not have been deleted. It's
a current intel chip, and doesn't even require an ME binary.
This reverts commit 959478a763.
Change-Id: I78594871f87af6e882a245077b59727e15f8021a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11860
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
E.g. on my MacbookAir to generate spd.bin to be used
with coreboot I do:
./inteltool -S spd.bin
Change-Id: If165475ed3e1f3262a8926ef619128d25b1e2896
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11847
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Only one value would work with corresponding gma code currently (which one
depends on board). Going forward, it's possible to compute which number can
be used, so there is no need to keep this info around.
Change-Id: Iadc77ef94b02f892860e3ae8d70a0a792758565d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11862
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Based on the info by Felix Held.
Change-Id: Iab84dd8a0e3c942da20a6e21db5510e4ad16cadd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11857
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Currently cbfstool would reject non-alpanumeric characters in
image names. Underscore is not alphanumeric and is used in some
default fmaps. This change allows image names to contain all
"printable" characters except spaces.
Change-Id: I6ba2b581d5623f5b028149ece0169892ea63fd04
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: http://review.coreboot.org/11807
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The binutils-2.25 has added some new line, making the hunk
move downward a little. The utility patch can fix the offset
with "fuzz" message. So, recreate the patch to avoid that
message.
Change-Id: Ie659a8faf923465f6d47f7c0c0bf903c5eb903ab
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11639
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Clang is the default compiler on BSD and OS X. With this
change, we don't have to install gcc any more. Clang can
act as host cc.
This is a known issue on GNU mail list. Please refer
the link below.
https://sourceware.org/bugzilla/show_bug.cgi?id=17473
Change-Id: I0f014b776e86e6d0cbebd560cb17f469f31e1dfb
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11638
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Grep the output of wget, showing only the percentage.
Leave the final "100%" unerased.
Checking return code of wget is removed.
Change-Id: I4559e88d541738a594dce92e23589992f234cb9b
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11520
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
mohonpeak is the reference board for Rangeley. I doubt anyone uses it
or cares about it. We jokingly refer to it as "Moron Peak". It's code
with no known users, so we shouldn't be hauling it around for the
eventuality that someone might use it in the future.
Change-Id: Id3c9fc39e1b98707d96a95f2a914de6bbb31c615
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11790
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
We already have two other code paths for this silicon. Maintaining the
FSP path as well doesn't make much sense. There was only one board to
use this code, and it's a reference board that I doubt anyone still
owns or uses.
Change-Id: I4fcfa6c56448416624fd26418df19b354eb72f39
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11789
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
This is a sad story. We have three different code paths for
sandybridge and ivybridge: proper native path, google MRC path, and,
everyone's favorite: Intel FSP path. For the purpose of this patch,
the FSP path lives in its own little world, and doesn't concern us.
Since MRC was first, when native files and variables were added, they
were suffixed with "_native" to separate them from the existing code.
This can cause confusion, as the suffix might make the native files
seem parasitical.
This has been bothering me for many months. MRC should be the
parasitical path, especially since we fully support native init, and
it works more reliably, on a wider range of hardware. There have been
a few board ports that never made it to coreboot.org because MRC would
hang.
gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so
the effort was abandoned at first. Once the native path became
available, the effort was restarted and the board is now supported.
In honor of the hackers and pioneers who made the native code
possible, rename things so that their effort is the first class
citizen.
Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11788
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
When adding an FSP blob relocate it to its final
destination. This allows FSP to not be hard coded in
the cbfs. In order for the include paths to work
correctly w/ the edk 2 headers we need to supply
a neutered ProcessorBind.h to match up with the
tool environment such that one can get the UEFI
Platform Initialization type definitions.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados and booted. Also added FSP with -b and manually
adjusted location in fsp cache-as-ram. Booted as well.
Change-Id: I830d93578fdf745a51195109cf18d94a83ee8cd3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11778
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For shared compilation units between coreboot proper
and cbfstool that means one needs to provide printk
logging. Therefore, provide printk() at <console/console.h>
to mimic coreboot's environment.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built cbfstool with code that includes and uses
<console/console.h>.
Change-Id: I8e54d403526a397e4fd117738a367a0a7bb71637
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11774
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Older gcc versions throws a warning when a struct or union is
declared without a valid name (anonymous). This patch enables the
feature for older gcc versions so that no warning will be issued.
Change-Id: Idc5481f4d5723c5090a6f7d7dbb0686a737e11fc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11779
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
They allow optimizing a verification of a whole CBFS image by only
dealing with the headers (assuming you choose to trust the hash
algorithm(s)).
The format allows for multiple hashes for a single file, and cbfstool
can handle them, but right now it can't generate such headers.
Loosely based on Sol's work in http://review.coreboot.org/#/c/10147/,
but using the compatible file attribute format. vboot is now a hard
dependency of the build process, but we import it into the tree for
quite a while now.
Change-Id: I9f14f30537d676ce209ad612e7327c6f4810b313
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11767
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I1c5e3424cb56f1f10e75bb07db084c3500f3ba07
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11768
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
We need to emit some hex strings.
Change-Id: I9e7e184282f6ad0470f2e269f5dc874e78f8b697
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11766
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iecefdd1e827e4eb8b4da573e4291850d6c47767f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11754
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
To catch dependency errors in symbol.c (such as the ones
fixed by I51b4ee326f082c6a656a813ee5772e9c34f5c343) we need
to check for global kconfig warnings before saving config
files.
This patch will produce errors for wrong dependencies and
add catching of errors to conf, nconf and mconf. Sorry,
gconf users, you will have to wait.
Change-Id: Idf7ee406ce3869941af319219aea16fab826df84
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11291
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Up to now, if both fmap and a master header existed, the master header
was used. Now, use the master header only if no fmap is found.
Change-Id: Iafbf2c9dc325597e23a9780b495549b5d912e9ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11629
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On x86, the bootblock can (and will) become part of the regular file
system, so there's no distinct fixed-size region for the bootblock
there.
Change-Id: Ie139215b73e01027bc0586701361e9a0afa9150e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11691
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
$(src) is not defined when building directly from the cbfs directory (that is,
when building cbfs as standalone, running make in the cbfs directory), so we
need to define the path to the commonlib include path relative to $(top).
Change-Id: I72e80b030d4a156ec653ded5ab1457b16f612526
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11706
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Instead of reaching into src/include and re-writing code
allow for cleaner code sharing within coreboot and its
utilities. The additional thing needed at this point is
for the utilities to provide a printk() declaration within
a <console/console.h> file. That way code which uses printk()
can than be mapped properly to verbosity of utility parameters.
Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11592
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
endian.h lives in under sys on the BSDs. Replace htole32() with
swab32(htonl(..)) as a proxy for little endian operations.
Change-Id: I84a88f6882b6c8f14fb089e4b629e916386afe4d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11695
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Since fmap doesn't come with a checksum, we resort to a number of
heuristics to determine if a given location hosts an fmap (instead of
another data structure that happens to store the fmap magic string at
the right location).
The version test is particularly effective against strings containing
the magic (which either terminate with 0, or have some other ASCII data,
but rarely a '\001' byte inside the string).
Change-Id: Ic66eb0015c7ffdfe25e0054b7838445b8ba098e9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11690
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The command adds a new cbfs file, fills in the CBFS meta data in cbfs
master header format, then points the master header pointer (which
resides at the last 4 bytes of the CBFS region) to the data area of the
new file.
This can leak some space in CBFS if an old-style CBFS with native master
header gets the treatment, because a new header is created and pointed
at. flashmap based images have no such header, and the attempt to create
a second file with the (hardcoded) name will fail.
Change-Id: I5bc7fbcb5962b35a95261f30f0c93008e760680d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11628
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is more in line with how fmd/fmap specify ranges.
Change-Id: Iecf8250e84d6eb267711ded446909b21147f1a9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11623
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Let's move x86 style bootblocks (and later the others) and the master header
into the CBFS structure. Prepare for this by adding file types.
Change-Id: I1b4149c7f3b8564ee358a2c18ba91e6a7a6797da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11627
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
fileno() is a mess on some operating systems. Don't
deliberately convert between FILE * and file handles.
Change-Id: I5be62a731f928333ea2e5843d81f541453fdb396
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11636
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
flmstr register bits have slightly different meaning for IFD v2.
BUG=chrome-os-partner:45091, chrome-os-partner:43461
TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image:
Found Master Section
FLMSTR1: 0x0a0b0000 (Host CPU/BIOS)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: disabled
Host CPU/BIOS Region Write Access: enabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: disabled
Host CPU/BIOS Region Read Access: enabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR2: 0x0c0d0000 (Intel ME)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: enabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: enabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR3: 0x08080118 (GbE)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: disabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: disabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: disabled
Requester ID: 0x0118
Then, run `ifdtool -l image.bin` and verify newly locked image is identical.
Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked
and unlocked regions are identical to above.
Finally, burn glados image, run `flashrom -V`, and verify ME regions is
locked and descriptor region is RO.
BRANCH=None
Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4
Original-Reviewed-on: https://chromium-review.googlesource.com/298968
Original-Commit-Ready: Shawn N <shawnn@chromium.org>
Original-Tested-by: Shawn N <shawnn@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There's no need to maintain two lists of dependencies that need to be
changed every. single. time.
Change-Id: I26bb8c884e98afe74fd9df11464bcf88e130cd92
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11674
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It was added to an unused variable.
Change-Id: I869ffdda7e04b5c615931473c760d66b803fb98b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11673
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The locate command was previously being used for x86 romstage
linking as well as alignment handling of files. The add command
already supports alignment so there's no more users of the
locate command. Remove the command as well as the '-T' (top-aligned)
option.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi. Noted microcode being directly added.
Change-Id: I3b6647bd4cac04a113ab3592f345281fbcd681af
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11671
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of going through the locate then add-stage
dance while linking romstage twice allow for adding romstage
with --xip flags to perform the relocation while adding it
into CBFS. The -P (page-size) and -a (alignment) parameters
were added as well so one could specify the necessary
parameters for x86 romstage.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Change-Id: I585619886f257e35f00961a1574009a51c28ff2b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11669
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The cbfs_locate_entry() function had a hack in there which
assumed a struct cbfs_stage data was being added in addition
to the struct cbfs_file and name. Move that logic out to the
callers while still maintaining the logic for consistency.
The only impacted commands cbfs_add and cbfs_locate, but
those are using the default 'always adding struct cbfs_stage'
in addition to cbfs_file + name. Eventually those should be
removed when cbfs_locate is removed as cbfs_add has no smarts
related to the cbfs file type provided.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi.
Change-Id: I2771116ea1ff439ea53b8886e1f33e0e637a79d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11668
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to allow cbfstool to add XIP romstage on x86 without
doing the 'cbfstool locate', relink, then 'cbfstool add' dance
expose the core logic and of rmodule including proving an optional
filter. The filter will be used for ignoring relocations to the
.car.global region.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi.
Change-Id: I192ae2e2f2e727d3183d32fd3eef8b64aacd92f4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11598
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The core logic of the rmodule parser is ideal for
processing romstage ELF files for XIP. To that
end start the work of exposing the logic from
rmodule so cbfstool can take advantage of it.
The properties that both need require:
- Single program segment
- Relocation information
- Filter relocation processing
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi.
Change-Id: I176d0ae0ae1933cdf6adac67d393ba676198861a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11595
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There's no need to whine about missing files, so test for them first.
Change-Id: I906fd04a315de70340ce76d7c38eaaf88cc6580a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11642
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We build the coreboot utilities in a separate step as a minor
optimization. When logging in junit format (for jenkins), we want to
have a report on those as well (instead of an xml error).
Change-Id: Ibcd3b02bce9a314c30b5f7414e9e4cf0149ffd6a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11641
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Variable expansion made abuild create board..foo/bar, which are annoying
on jenkins' web UI because it doesn't cope properly with the empty
namespace between the dots. make it create board.foo/bar or
board.$class.foo/bar.
Change-Id: Ifa79cbfd1f263e11a458b3cc320baeed6a3fbc98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
We had two mappings of filetype IDs to strings. We shouldn't.
Change-Id: I08e478b92f3316139f14294e50ede657c7d5fb01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11626
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
As with most other languages, a pre-installed Ada toolchain is needed
to build gcc's Ada frontend. To support building with older host tool-
chains, the patch `gcc-5.2.0_gnat.patch` disables warnings for unknown
pragmas. Building has been tested with host gcc-4.9 and hopefully works
with newer versions, too.
For convenience, the gnattools (e.g. gnatmake etc.) will be build if
'ada' is specified as a target language.
Change-Id: Ia78c29d1aba2943de5238421a324cfff8eb08875
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11590
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add an option `--languages` which takes a list of target languages to
buildgcc. That list gets passed through to the configure step for
building gcc.
Also alter the Makefile to pass $(BUILD_LANGUAGES) to that option, if
this variable is set.
Change-Id: I6a74ab2c75871ea8d03a499cca33d88938b59c8d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11589
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There are currently 2 uses for rmodule programs: stand alone
programs that are separate from the coreboot stages and a
relocatable ramstage. For the ramstage usage there's no reason
to require a rmodule parameter section. Therefore make this
optional.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built ramstage w/ normal linking (w/o a rmodule parameter
section). No error.
Change-Id: I5f8a415e86510be9409a28068e3d3a4d0ba8733e
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11523
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Bring rmodule linking into the common linking method.
The __rmodule_entry symbol was removed while using
a more common _start symbol. The rmodtool will honor
the entry point found within the ELF header. Add
ENV_RMODULE so that one can distinguish the environment
when generating linker scripts for rmodules. Lastly,
directly use program.ld for the rmodule.ld linker script.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi and analyzed the relocatable ramstage,
sipi_vector, and smm rmodules.
Change-Id: Iaa499eb229d8171272add9ee6d27cff75e7534ac
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11517
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Whenever we want to add a file to CBFS with a specific alignment, we
have to do two cbfstool invocations: one to find a place for the file,
and another to actually add the file to CBFS. Get rid of this nonsense
and allow this to be done in one step.
Change-Id: I526483296b494363f15dc169f163d93a6fc71bb0
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11525
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
According to https://gcc.gnu.org/gcc-4.6/changes.html it's only in gcc 4.6,
not 4.5, which I mistakenly believed.
Change-Id: I8212e7921bd9d1436a0ba491cbe6c4d473228956
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11476
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Tested-by: build bot (Jenkins)
This isn't required for correct execution, and doesn't need to be tested
on every single compiler out there.
Since GCC < 4.5 has no idea about _Static_assert, hide it there. Our
build tests will make sure that the test is run before changes are
submitted to master.
Change-Id: I4141f4aa23b140d2d1017ca7b4dace5aa7db0c04
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11475
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Display compressed and decompressed sizes, as well as the compression
algorithm used, when a compressed file is encountered.
Change-Id: I13c2332702c4a5bec379e1ebda72753e06f8e135
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11359
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Currently, compression is only allowed at subheader level (e.g. cbfs_stage,
cbfs_payload_segment). This change adds compression field to each file's
header so that any cbfs file can be compressed.
With the necessary additions in coreboot and libpayload, the following sample
code can load a compressed file:
const char *name = "foo.bmp";
struct cbfs_file *file = cbfs_get_file(media, name);
void *dst = malloc(ntohl(file->uncompressed_size));
dst = cbfs_get_file_content(media, name, type, file, dst);
cbfs_stage and cbfs_payload_segment continue to support compression at
subheader level because stages and payloads have to be decompressed to the load
address, which is stored in the subheader. For these, file level compression
should be turned off.
Change-Id: I9a00ec99dfc68ffb2771bb4a3cc5ba6ba8a326f4
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10935
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to make analysis easier provide an option (-T) to
print timestamps in a parseable format:
ID<tab>raw timestamp<tab>time from previous entry<tab>description
BUG=chrome-os-partner:44669
BRANCH=firmware-strago-7287.B
TEST=Built and tested on glados. Used the following script:
cbmem -T | awk 'BEGIN { FS="\t" } { tot += $3 } END { print tot }'
Change-Id: I06dc0487d1462b6a78924130f0ad74b0d787d3f8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add the timestamp tick frequency within the timestamp table so
the cbmem utility doesn't try to figure it out on its own. Those
paths still exist for x86 systems which don't provide tsc_freq_mhz().
All other non-x86 systems use the monotonic timer which has a 1us
granularity or 1MHz.
One of the main reasons is that Linux is reporting
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq as the true
turbo frequency on turbo enables machines. This change also fixes
the p-state values honored in cpufreq for turbo machines in that
turbo p-pstates were reported as 100MHz greater than nominal.
BUG=chrome-os-partner:44669
BRANCH=firmware-strago-7287.B
TEST=Built and booted on glados. Confirmed table frequency honored.
Change-Id: I763fe2d9a7b01d0ef5556e5abff36032062f5801
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11470
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Ie3a44c6db9c9c186c52b4743334266ec5411ba8a
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11472
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I9f59a00e735f39df813b2216290da62eea3c595d
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11372
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Previously, X4X was incorrectly named because it provides
support for SKUs within XX4X range. This is renamed.
This patch provides support for all X4X SKUs according to
datasheet Intel 4 Series Chipset Family Specification Update,
namely: Q45, Q43, P45, P43, G45, G43, G41 and B43 (both versions).
Tested on Gigabyte GA-G41M-ES2L
Change-Id: I032265e80d9ca51e2fef29201280832ea3210a0b
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/11245
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Whatever it is, it likely won't be cros/chromeos-2013.04 anymore.
Change-Id: I020b65a7406e3bef7d1c8fad8c530354b1f78819
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11438
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
This patch adds support to enable a linker workaround to a hardware
erratum on some early Cortex-A53 revisions. Since the linker option was
added very recently, we use xcompile to test whether the toolchain
supports it first. It is also guarded by a Kconfig since only a few
ARM64 SoCs will need this and it incurs a performance penalty.
BRANCH=none
BUG=none
TEST=Turned it on or off for Smaug and confirmed that it (dis)appeared
in verbose make output accordingly.
Change-Id: I01c9642d3cf489134645f0db6f79f1c788ddb00d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 57128785760c4dfa32d6e6d764756443a9323cb7
Original-Change-Id: Ia5dd124f484e38460d75fb864304e7e8b18d16b7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294745
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11403
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
We have tons of file types now that can be safely extracted.
It's pretty much only stages and payloads that aren't.
Change-Id: Ibf58a2c721f863d654537850c6f93d68a8a5bbeb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11360
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
My concern was that compilers may something stupid under the assumption
of a fixed struct size, but filename is already variable, so things are
okay.
Change-Id: I5348faf68f0a7993294e9de4c0b6c737278b28af
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11331
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
They're passed as part of the header now.
Change-Id: I7cd6296adac1fa72e0708b89c7009552e272f656
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11327
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The header is now created before the "converters" are run.
Adding new capabilities (and fields to the header) will happen there,
so we're close.
Change-Id: I0556df724bd93816b435efff7d931293dbed918f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11326
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
These functions can do all kinds of things, such as converting an ELF
image into SELF, or (in the future) compress or checksum entire files.
This may require changing or adding fields to the header, so they
need to have access to it.
The header_size parameter that was provided (but never used) is
equivalent to cbfs_file's offset field.
Change-Id: I7c10ab15f3dff4412461103e9763a1d78b7be7bb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11325
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It's sole use was comparing it to the header's "len" field.
Change-Id: Ic3657a709dee0d2b9288373757345a1a56124f37
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11324
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
->len used to be set to the file data length plus the size of the
padding used for the cbfs_file header. This isn't the case anymore,
so no patching of this field is necessary anymore.
->offset still needs to be patched in that case because its final
value can only be determined when the file's actual location is known.
Change-Id: I1037885f81b4ed3b68898dd7d0e515cf7a9c90a8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11322
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Up to now cbfstool creates the cbfs_file header at the latest possible
time, which is unsuitable when the idea is to add further fields to it
that need to be configured earlier.
Thus, have it ripple up the call chain.
Change-Id: I7c160681c31818bc550ed2098008146043d0ee01
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11320
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
"target", for what? It's the offset where the file header of the currently
added file will be located, name it as such.
Change-Id: I382f08f81991faf660e217566849773d9a7ec227
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11319
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Refactor the code to be better understandable.
Change-Id: Ia815a27f7cc83c226a32e87485d712a5fbf4168e
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11318
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In testing other localization changes, I found that I couldn't build
anymore because xcompile wasn't picking up my toolchain. I traced it
to the regex comparison of '.*format \(.[a-z0-9-]*\)' to the string
'formato del fichero elf32-i386'. Forcing the localization of
objdump to C before doing the comparison fixes the issue.
Change-Id: I6bed5a9824807dd5bc5a38b711ab47e2af4b0c29
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11304
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
There doesn't seem to have been an olddefconfig target in the coreboot
version of the Kconfig makefile. It's listed in the .PHONY, but it
doesn't seem like it's ever been there. This is useful for expanding
a miniconfig saved with 'make savedefconfig'.
Change-Id: I3798f8469135b58d32da68d4b0e434ab5351b501
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11273
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some patch implementations (eg. BSD) create new files by taking the "---" file
name instead of the "+++" one, so set both to the file name that is to be
created.
Change-Id: I6f37748b4cf0852d292f8f5156fc27ab8fd481b6
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reported-by: Idwer Vollering <vidwer@gmail.com>
Reported-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/11303
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It still needs to pass --32 (yes, 32) to the assembler.
x86_64-linux does this (through some other config file),
x86_64-elf did not.
This fixes building SeaBIOS with our x86_64-elf multilib compiler.
Change-Id: Ibe2a70e46e64e71c947482be5ec0eaf7f7bf300d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11289
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
All compilers built, incl. x86_64-elf as multilib and riscv-elf.
Change-Id: Iafa61b1d2ffc9c737ab67a417c62417593b69372
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10975
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The get_region() function was using fixed masks for
the base and limit. However, newer descriptors (on
skylake, e.g.) use a 15-bit mask -- not a 12-bit one.
Choose the right mask based on ifd_version.
BUG=chrome-os-partner:43461
BRANCH=None
TEST=Built glados bootimage.
Original-Change-Id: Ibcbfd649a561d36b17ea2cc8fbeb30ffdbbb2c96
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293250
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I7f2ef9fb8e5b6c7114225fecc2798668d6507ac3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11229
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The descriptor format has changed with Skylake and some fields have
moved or been expanded.
This includes new SPI frequencies and chip densities, though unfortunately
30MHz in the new format conflicts with 50MHz in the old format...
There are also new regions with a few reserved regions inserted before
a new embedded controller region.
Unfortunately there does not seem to be a documented version field
so there does not seem to be an official way to determine if a
specific descriptor is new or old. To work around this ifdtool
checks the hardcoded "SPI Read Frequency" to see if it set for
20MHz (old descriptor) or 17MHz (new descriptor).
BUG=chrome-os-partner:40635
BUG=chrome-os-partner:43461
BRANCH=none
TEST=run ifdtool on skylake and broadwell images
Original-Change-Id: I0561b3c65fcb3e77c0a24be58b01db9b3a36e5a9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/281001
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9a08c26432e13c4000afc50de9d8473e6f911805
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/293240
Reviewed-on: http://review.coreboot.org/11228
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Display the total accumulated time using each timestamp
entry. It purposefully doesn't take into account the first
timestamp because that can be a platform dependent value
that may not contribute to the concept of "total".
BUG=None
BRANCH=None
TEST=Ran cbmem on glados where TSC doesn't reset to 0 on
reboots. Clear total value given at end.
Original-Change-Id: Idddb8b88d3aaad11d72c58b18e8fd9fd1447a30e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291480
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Trybot-Ready: David James <davidjames@chromium.org>
Change-Id: I79a0954d3b738323aaebb3e05171bcf639e5d977
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11202
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
After the preparation in earlier commits, it is now possible to handle the
more general case of position independent files using the special code path
for fixed location files.
This leads to a single place where non-empty cbfs file headers are actually
written into the image, allowing us to move it up the chain more easily.
Change-Id: I8c1fca5e4e81c20971b2960c87690e982aa3e274
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11222
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
... and the assert is gone.
The actual action of adding a just-right file can be moved after the tests
since it's exactly the condition those tests don't continue or break on.
Change-Id: I6d0e829e0158198301136ada9a0de2f168ceee3f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11221
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The assert() makes sure the if() holds true. But that assert won't survive for
long.
Change-Id: Iab7d2bc7bfebb3f3b3ce70dc5bd041902e14bd7a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11220
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We will want to create headers that live outside the final image at some point
(eg. to build the file before we even know where to place it).
Change-Id: Ie4c0323df8d5be955aec3621b75309e8f11fae49
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11219
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Pass the file type into it instead of creating an entry, then modifying the
header field again after the fact.
Change-Id: I655583218f5085035b0f80efff7f91a66b5b296e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11218
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If an earlier stage built a larger header, cbfs_add_entry_at() shouldn't
decide to go with the most boring, least featureful header type (and its size)
instead.
Change-Id: Icc5dcd9a797a0f3c42f91cddd21b3b3916095b63
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11217
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The idea is that they can at some point add extended attributes to the header.
That also needs to be passed, but let's start simple.
Change-Id: I80359843078b149ac433ee3d739ea192592e16e7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11216
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It will at some point create the header, and pass it with its size. We can
start with the size already.
Change-Id: I8f26b2335ffab99a664d1ff7bc88e33ed62cf9ca
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11215
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Headers vary in size soon, and more places need to be able to calculate their
size.
Change-Id: I30761bb9da0756418993dee21d8fa18cf3174c40
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11214
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is in preparation of creating the cbfs_file header much earlier
in the process. For now, size is enough because lots of things need to
move before it makes sense to deal with cbfs_file at a higher level.
Change-Id: I47589247c3011cb828170eaa10ef4a1e0f85ab84
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11213
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
No need to read the file before bailing out.
Change-Id: Ida7226c6ec227e1105724cdb1e5a0927217a69c7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11212
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is a generic structure, not unlike the cbtables design, based on which we
can build specialized TLV data structures.
Change-Id: I98a75eef19f049ad67d46cdc2790949dcd155797
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10937
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. Add -P|--package to build iasl
2. Remove -G|--skip-gdb, which was to skip gdb.
3. Add -S|--scripting to build gdb
4. Remove -C|--clang, which was to build clang.
All these changes are aligned with the options parsing below.
The help text is correct.
Change-Id: I897ea5e8ab002086e45bf05ff33230815b246057
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11158
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The script is pretty linux specific as-is, but more portability won't hurt.
Change-Id: I33e18606bea4e23043d748e3fe66a345e720d389
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11151
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
libpayload is calling the xcompile script from payloads/libpayload, so the
script never finds the path on its own and has to be fed the right XGCCPATH by
hand.
This makes xcompile look for the parent path too, so that it can find the
crossgcc toolchains when called from libpayload.
Change-Id: Icc41bb68e3a43810f40f03ab1eb08af07a50a3de
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11119
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The test failed to trigger because top wasn't set.
Change-Id: I96de16a1b5cbc5a64d8e65ed84fd6849dd618e8f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11147
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes the botched fix in commit d9bc2fadc4
Change-Id: I0c4445af2851bc80fabb631864321a56123ce7b0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11146
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Otherwise the later processing may fail. Keep minimized version as
config.short.txt for the user's benefit.
Change-Id: I1082ff68de85027d526266cdbf2073d22ce7f2e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10525
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Otherwise there may be a filesystem boundary that breaks make oldconfig.
Change-Id: I1eb55bcabc3e1b834d54f3da9fadfc352f0c4a65
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11150
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is basically a -Werror mode for Kconfig. When exporting
KCONFIG_STRICT in the Makefile, warnings in Kconfig will produce
errors instead.
This will make it easier to spot unclean Kconfig files, settings
and dependencies.
Change-Id: I941af24c3ccb10b8b9ddc5c98327154749ebbbc6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10977
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is to trick libreboot into not deleting misc.c when checking
out coreboot.
Change-Id: I8f0bb5cb3eb5681f99c616ae03de126efab852a9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11134
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
oldconfig may wait for some input. Since we don't care while building tools,
just provide something.
Change-Id: I1c6f1b46957301886a7645cfb6c6bd264437aa7e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11094
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This will allow building and reporting both in one pass.
Change-Id: Id7dbe63c7628cb97d9cf190c151bf23c7b264a89
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11093
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This simplifies editing.
Change-Id: Iff7f0cb7e52788836adcc0813a7bfb6d69009eed
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11091
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Similar to what the below change says,
(
http://review.coreboot.org/10792
commit ddb8f80894
Author: Patrick Georgi <patrick@georgi-clan.de>
Date: Sat Jul 4 17:45:54 2015 +0200
buildgcc: Deal with gmp on 32bit Linux on 64bit CPUs
GMP is overeager to detect 64bit ABIs even if the entire running codebase is
32bit (but on a 64bit CPU). Enforce a 32bit build in that situation.
)
building GMP can not detect Cygwin is 32bit either if the
host which Cygwin is running is 64bit. We set ABI=32
in that case.
Change-Id: Ic53d75defebbe902325eb07f3d8631b2a53245ef
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11123
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Running `uname` on Cygwin gets "CYGWIN_NT-6.1-WOW" instead of "Cygwin".
We need to fix the $UNAME on Cygwin.
Change-Id: I540bfc52089951006fd0e20bb9893a3d891df9e1
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11124
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
secimage does not use libgmp, so don't link it in.
(Otherwise linking fails if the library is not installed)
Change-Id: I24af21c7754ecd0109f3e86669fa34fa6991d7fe
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11079
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It doesn't know "source", but wants the older "." instead
Change-Id: Iafa61b1d2ffc9c737ab67a417c62417593b69374
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10974
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The code for removing a file had its own merge routine. Use the generic one
instead.
Change-Id: I90ed007ab86f78a2728f529fa0143c5c1dfbbdc3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10967
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
So far it's still unused, but its purpose will change:
It will become an offset to another structure that contains additional file
attributes.
This change is compatible because the binary format doesn't change and so far
the field was always set to 0, which can serve nicely as 'unused' field.
Change-Id: I2dafb06866713d43a236556f9492641526270837
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10933
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch enables running the checkpatch script on the code portion
of each commit as part of the pre-commit hook. At this point there
is no checking of the commit message in place (e.g. for typos)
Change-Id: I7cdf0692cf372986e411f4aba4691417b73c7511
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8419
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Trailing commas are useful for lists that can be extended. These lists are
0-terminated, and there should be no elements following that.
Change-Id: Iea8c6d5579d6363e77e1f5af666948160c4a9bf9
Signed-off-by: Sol Boucher <solb@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Change-Id: I1a117a9473e895feaf455bb30d0f945f57de51eb
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10932
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Parse compression algorithm arguments using a single list.
Change-Id: Idc5b14a53377b29964f24221e42db6e09a497d48
Signed-off-by: Sol Boucher <solb@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Change-Id: I1a117a9473e895feaf455bb30d0f945f57de51eb
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10931
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
With introducing hash algorithms, 'algo' is ambiguous, so rename it to
'compression' instead.
Change-Id: Ief3d39067df650d03030b5ca9e8677861ce682ed
Signed-off-by: Sol Boucher <solb@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Change-Id: I1a117a9473e895feaf455bb30d0f945f57de51eb
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10930
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Lock down its size and document some of the fields
Change-Id: I09fd6c80185345da0ae17d0f4498b50995fd1ec5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10927
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
It's not like we _ever_ changed it, so drop the option and make cbfstool
use the default. always.
Change-Id: Ia1b99fda03d5852137a362422e979f4a4dffc5ed
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10918
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It's helpful to know the base_time (1st timestamp) in the
timestamp table because it provides more information like
the accumulated time before the first timestamp was recorded.
In order to maximize this information report the base time
as an entry that is printed. It's called '1st timestamp'.
The implementation turns all the timestamp entries into absolute
times so one can observe both absolute and relative time for
each marker.
Change-Id: I1334a2d980e3bcc2968a3bd6493c68b9efcca7ae
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10883
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There may be boards that shouldn't be built for one reason or another.
Allow black-listing them by adding a file to the mainboard directory called
'abuild.disabled'. It should contain the reason that is printed by abuild and
also serves as documentation for users that want to know what's going on.
Change-Id: I78c3281a578e96ee40f6b101143d4f3763582350
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10917
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In case of downloading errors, the URL is handy for analyzing the cause.
Change-Id: I6874cdc3c881cfdd52c80f80323536c30723654b
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10853
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
The script `util/crossgcc/buildgcc` was rewritten in commit 85b07d68
(buildgcc: move to a package centric user interface) and the switches
changed. This patch does the following:
- IASL was split out of the gcc builds, so needs a target of its own.
- Add clang build target
- Update the build-ARCH targets as buildgcc -G no longer builds gcc.
- Rework all the targets to use common targets to call buildgcc
- Split the tempfile clean from the regular clean
- Change the 'all' target to leave the tempfiles until all architectures
are built so that if one fails and needs a rebuild, it doesn't have to
start from scratch.
- Add an all_without_gdb target
- Add clang build to all
Change-Id: I4ff720eab6d9b72d00757fd2b632e6d9a6c25aa3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10679
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
rmodule.c: In function ‘rmodule_create’:
rmodule.c:287:29: error: ‘phdr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
(phdr->p_vaddr + phdr->p_memsz))) {
^
rmodule.c:204:14: note: ‘phdr’ was declared here
Elf64_Phdr *phdr;
^
Change-Id: I94a235253610348484eef218ec855103a3bb5da5
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Reviewed-on: http://review.coreboot.org/10881
Tested-by: build bot (Jenkins)
Reviewed-by: Francis Rowe <info@gluglug.org.uk>
Instead of having a second copy that already within 2-3 days
becamer quite outdated, use the same xcompile copy for coreboot
and libpayload, as we do with Kconfig already.
This requires a simple change to the top level xcompile to understand
both CONFIG_COMPILER_GCC and CONFIG_LP_COMPILER_GCC (only one of
them will occur at the same time)
libpayload's .xcompile target was moved later so that it can make use
of $(top)
Change-Id: I44001067f551cd0776dd303cbaeaa40eb3d5c1db
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10863
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
clang probing will pick up the first one that clang does not complain about
and right now that is armv7a-eabi, even though our toolchain builds for
armv7-a-eabi (and consecutively the build fails because there is no
armv7a-eabi-as)
Change-Id: I2594151150107f8e9c1aad33647dcb2f9878f953
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10830
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On Windows systems, structs can be packed gcc style or ms style.
Make sure we use the same one (gcc style) in our user space tools
that we use in coreboot.
Change-Id: I7a9ea7368f77fba53206e953b4d5ca219ed4c12e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10794
Tested-by: build bot (Jenkins)
On Windows systems the archetype printf defaults to ms_printf
instead of gnu_printf. Keep the archetype print for all non-
Windows compiles to not break compatibility with other systems
out there.
Change-Id: Iad8441f4dc814366176646f6a7a5df653fda4c15
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10793
Tested-by: build bot (Jenkins)
The option --divide is required by our assembler to ensure that
'/' is not parsed as a comment sign but as a division, because
some of the cache as ram code is using divisions.
The --divide parameter has been part of the GNU as since binutils 2.17.
Hence, compile romstage (which contains cache as ram init) with
-Wa,--divide unconditionally instead of probing for it and adding it to
all compiler invocations (because that is causing random trouble with
clang when compiling the SMM code and calling gcc with --divide instead of
-Wa,--divide)
Change-Id: Ideefb2a243dc1d657ba415a99c1f8ab1d93800e0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
While for GCC targets the compiler is just defined as a single
binary, for clang it is defined as a binary and some options, e.g.:
clang -target i386-elf -ccc-gcc-name i386-elf-gcc
When executing the compiler with "$1", the shell will look for a
binary with the above name (instead of just clang) and always fail
detection of any CFLAGS.
By adding -c we prevent the compiler from failing because it can't
link a user space program (when what we're looking for, is whether
a specific compiler flag can be used to compile a coreboot object
file)
Change-Id: I1e9ff32fe40efbe3224c69785f31bc277f21d21b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10816
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Running "clang -target i386-elf --print-librt-file-name" prints
[..]/bin/../lib/clang/3.6.1/lib/libclang_rt.builtins-i386.a
However, the correct path is [..]/lib/linux/libclang_rt.builtins-i386.a
on a Linux host. Hence, create symbolic links to make sure that our
build system finds the file where it expects it.
Change-Id: I21ef5c4a690d83c326717ca55c5ace558257a0ec
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10815
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I974c6c8733356cc8ea4e0505136a34b6055abf0c
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10809
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Change-Id: I9bfc017dee86fe6cbc51de99f46429d53efe7d11
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10810
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Not all systems put bash at /bin/bash.
Change-Id: Ib58cd2f6cf330b5b2678d55bb929696872fba9c9
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10808
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
GMP is overeager to detect 64bit ABIs even if the entire running codebase is
32bit (but on a 64bit CPU). Enforce a 32bit build in that situation.
Change-Id: I23e9e57f3c8b0e3ad2e4e1e3eb106f7830aa76a1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10792
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
xcompile keeps two CFLAGS around now, for GCC and CLANG. Normally they're not
required to request the libgcc/compiler-rt path, but with the multilib capable
x86_64-elf target it's required to make it pick the right libgcc when used as
i386-elf builder.
Change-Id: I700e7aa5783dc36698dd2ab8a38642a144e80fe9
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10795
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The syntax of "conf" has changed, but we never adapted
our Kconfig Makefile since we are not typically using those
targets (except for coreinfo)
Change-Id: Ib95b53d255d7456cc6d6bcc7048fcaa0db1ce142
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10716
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
It's perfectly fine to have one single copy of kconfig in the tree.
Change-Id: Icfe32f0249dfc1c223009d6e7136462f8f8a7248
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10521
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
These scripts were bit-rotting on my box and may be useful for somebody else.
no-fsf-addresses.sh removes various FSF addresses from license headers
find-unused-kconfig-symbols.sh points out Kconfig variables that may be
unused. There are some false positives, but it serves as a starting point.
Change-Id: I8ddb5bea5fe87d39eed5f39f32077944b37d0665
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10675
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Adds support in cbfstool to adjust the entry field based on the
virtual and physical address in program header.
BUG=chrome-os-partner:40713
BRANCH=None
TEST=Verified correct entry point address. Trusty loads and boots correctly.
Change-Id: I215b0bea689626deec65e15fb3280e369d816406
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 32a740f0b628c124d3251cc416e2fc133bb15c57
Original-Change-Id: Ia999b5c55887c86ef1e43794ceaef2d867957f4d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/274087
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10690
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I looked for a way to pass the 'make crossgcc -j8' on to buildgcc, but
didn't find a way to get that value directly. MAKEFLAGS turns -j8 into
a jobserver variable.
Instead, this patch allows the number of CPUs to be set on the command
line through a variable instead.
Example: 'make crossgcc BUILDJOBS=8'
Change-Id: I37608cdb4549226cb7ff8c3ff6d9f4773acf6b0b
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10620
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Update the clean target to remove the intermediate files. These should
get removed automatically, but if the build stops in the middle, or if
the -t command is used for buildgcc, they can be left in the directory.
Add a distclean target that removes the downloaded tarballs as well as
everything else.
Change-Id: I6ea19e7a499b0c313c1d2eff7e36386204ec834e
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10621
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
After commit with Change-Id Ia1839ed3 (sandy/ivy: Include
IRQ routes from platform), update autoport to include
that file into the DSDT.
Change-Id: I14534438d0b433895f384539c8b413eaa53d943a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10612
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
buildgcc fails if g++ or clang isn't found on the host. This
was failing on OSX due to the string used to check for clang
doesn't match "Apple LLVM". Add an additional search string for
clang "LLVM".
Change-Id: I05e36cfc690061b3233376d57f44f197cab933ea
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10569
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There's a separate target -P iasl for that now.
Change-Id: I95c0fe8fc266859d8a31b7bea890775dc9f19694
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10567
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With this change, the x86_64-elf-gcc can compile i386-elf
binaries by specifying -m32. The patch against GCC is needed
to enable building the 32bit libraries when building x86_64-elf-gcc
Change-Id: Ic86a009eccfdf3e33a398bcdcc13b15c8dfc0d31
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10497
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For consistency in user output, move the check for all
required utilities after printing the banner and parsing
options.
Change-Id: I5bf31368885c73e35f18b02d53d099f3f3871acc
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10566
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
When required tools are missing, try to give the user more detailed
information on how to solve the problem.
Change-Id: Ifa21c1af38a036a7d4f5a786041a87a7d45f4ec5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10555
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Iee5ab0d3bdc8b754669356f2046d290d9ca555c2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10511
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Don't print error messages if an unpatched clang is detected.
Change-Id: If77722a40a59e99f01d121a0c43999f05f3c4421
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10554
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This moves the CMAKE definition down into the case statement
for $PACKAGE so that it is only required when the user wants to
build clang.
With this approach, "./buildgcc -P clang" will error out with the
"ERROR: Missing tool:" message if cmake is not installed.
Change-Id: I1e5c1bd67ade8f93ba0390df7f234deb47b9b18a
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/10556
Tested-by: build bot (Jenkins)
Reviewed-by: Francis Rowe <info@gluglug.org.uk>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add support for detecting an x86-64 cross compiler in xcompile.
Change-Id: Icd2c9af7903956216db1fd54902eab6da0fe3e21
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/8669
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Otherwise dummy contains uninitialized data, which leads to non-reproducible
builds (and a leak of 4 bytes of stack data).
Change-Id: Iaaf846580ec436fdd4f0800c7576b544f50d6ae0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10524
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The precise phrase returned by 'type' differs between locales and shells.
It also doesn't matter because it returns an error code when it hasn't found a
match.
Let's simply assume there's no build_$OneOfOurPackages commands around that
could also match.
Change-Id: I44f021243149701e8da9dd74c368ca2ad4509419
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Tested-on: linux bash, linux dash, solaris sh, solaris ksh.
Reviewed-on: http://review.coreboot.org/10517
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ic6ce697af6102da7d8c53947c9d3b5ac39817d7c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10333
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
using grep is an extra process invocation, but it's not a bashism.
Also match precisely, so AGCC doesn't trigger on GCC (we don't have collisions
right now, but we won't have to deal with them in the future)
Change-Id: I242833c350b7f1e6a6793f288c1aae0b50d57a26
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10518
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Locales differ in the order in which they sort entries. This ensures
predictable behavior.
Change-Id: I4ceec90a56bbc368a847d14298db0a21cc21e77c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10510
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Build with bfd and gold linker, but use bfd linker per default
and make sure that lto is enabled in both binutils and gcc
Change-Id: I0584396b4580674cfdca24fbed0d8eeb1ee38806
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10496
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Instead of building IASL and GDB implicitly when building
GCC, this patch changes buildgcc to let you explicitly specify
what you want to build.
This will prevent IASL from building over and over again, when
all you need is GDB.
The new command line option is -P | --package <package> where
package is one of the following: GCC, GDB, CLANG, IASL
If no package is specified, buildgcc will default to GCC.
Change-Id: I8836bed16fc2bc39e0951199143581cc6d71cb4d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10492
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
IASL was broken when compiling without GCC.
Change-Id: Ib859ce41c1dda10181781c025fc378504f5ebb91
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10495
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
GDB stopped building ever since we updated from version 7.6
but nobody noticed ;)
Update from 7.9 to 7.9.1 and bring the required patches forward.
Change-Id: I2f357525a46d5540e9f57b80d830943bbd5dfcaf
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10494
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
This groups all tasks happening in the main program,
orders them according to their dependencies and adds
comments on the various tasks.
Change-Id: Ib62bd213977cbc3307ef62e9a7e64515563968c1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10490
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins)
- don't capture build_$package in a subshell by piping it
- move HOSTCFLAGS to build_GMP
- only create a build directory if a build happens
- automatically collect packages to build
Change-Id: Ic5a9f3f222faecd3381b413e5f25dff87262a855
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10475
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins)
Add a savedefconfig target and the help for it to the kconfig
makefile.
The main advantage I found for using defconfigs instead of the full
.config is that they require less maintenence, so long as reasonable
default values are set when adding new config options. When the
defconfig is expanded, it will use default values for all options not
saved in the defconfig. This cuts the size of a saved config from
500ish lines to roughly 20 lines.
savedefconfig was added to the linux kernel in commit id
7cf3d73b4360e91b14326632ab1aeda4cb26308d
Change-Id: I45f3dc87b773fb6e9ee53e32fdcafff1f53074d2
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10462
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Bring gdb in sync with all other build targets.
Change-Id: I9c478947a00f044edf910a91d876bbf486a791cf
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10488
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Otherwise one could end up with what they think is a coreboot toolchain
but in fact it'd be missing some patches.
Change-Id: Ic451f7061b822d0f4b64acc9976ba81fd544e85b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10487
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
gcc and binutils fixed their upstream tar balls, and running
autoconf created more problems than it solved
Change-Id: I0003dd597f521701405ff35923214435136b262d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10486
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Change-Id: I29fe23e377045f08b8212742d84c2ee2b4a61b15
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10485
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: I7a095470d408d013a4a915e010c59ea99ca1f1c8
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10484
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
The cbmem util needs the CBMEM_IDs and the strings for
reporting and shares the cbmem.h file with coreboot. Split out
the IDs so for a simpler sharing and no worries about overlap of
standard libraries and other things in the header that coreboot
requires, but the tool does not.
Change-Id: Iba760c5f99c5e9838ba9426e284b59f02bcc507a
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10430
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
$ make gitconfig
util/xcompile/xcompile: line 164: -print-librt-file-name: command not found
util/xcompile/xcompile: line 164: -print-librt-file-name: command not found
util/xcompile/xcompile: line 164: -print-librt-file-name: command not found
util/xcompile/xcompile: line 164: -print-librt-file-name: command not found
[..]
Change-Id: Ib477566e3841e419aa7880c912636540a0ad5432
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10464
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This removes quite a bit of boilerplate from the script, and makes
it easier to read.
Change-Id: I92348b810ff19f7d18810f842b76e0e595b3d397
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10435
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a new option -C|--clang to buildgcc to build a clang based
toolchain as opposed to a gcc based toolchain. This toolchain
comes with the required patches needed to successfully build
coreboot, and also with clang's famous scan-build script.
Change-Id: I1aea7cd6002edc4f3bb2b46dc1f69a212ad18f77
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10415
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- keep a list of packages to build in $PACKAGES and only download,
patch and build a package if it is in that list (instead of having
exceptions for GDB, EXPAT and PYTHON)
- unify interface for download() and unpack_and_patch()
- consolidate some randomly spread code like creating / removing
build directories and calls to searchtool()
Change-Id: I2070e3b2fbb84eb18e9220658fb2d5518b8179ee
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10434
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This will be useful for adding clang support (and hopefully
makes the code a bit more readable)
Change-Id: Ie866fb2bd71e2a64f26f2755961bd126e101cbe5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10433
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
clang requires some additional options to disable warnings which
can be handled by xcompile.
Also drop the hard coded clang compilers in Makefile
Change-Id: I0f12f755420f315127e6d9adc00b1246c6e7131b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/7612
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of fetching libgcc's location and required compiler flags on every
individual build, do it once in xcompile.
Change-Id: Ie5832fcb21710c4cf381ba475589d42ce0235f96
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/10425
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
This uses the availability of CONFIG_* variables in .xcompile and tests for
compilers in xcompile so that the build system doesn't need to probe them.
Change-Id: I359ad6245d2527efa7e848a9b38f5f194744c827
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/10424
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is in preparation of adding support for clang to xcompile.
Change-Id: I518d077f134610082b0939b1525682f2289eec34
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10423
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
crossgcc builds gmp, whose build system normally optimises for the hardware
it's built on. That may give a minor performance boost but has the downside
that the compiler becomes non-portable and may break on other systems due to
illegal instructions.
Setting CFLAGS to some reasonable value prevents gmp's configure script from
choosing CPU specific -mtune flags (which may enable optimizations that only
run on CPUs with the same feature set).
Enabling "fat" builds make the build system add all optimized assembler
routines and makes the selection of the right one a runtime decision instead
of deciding at compile time.
Change-Id: I72d20627270baa082cd02ebb4c9a09cd23f30f8c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10412
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
cbfs_get_file_content was replaced with cbfs_boot_map_with_leak but
36f8d27ea9 failed to get it into account.
Change-Id: I0c7840043b2ea6abaf8e70f4bf1a63c96aedebc1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10403
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Previously I tried to see if Linux think that port 0x60 is in use by keyboard.
Unfortunately it always thinks that it is. Instead just base off real input
busses used.
Change-Id: I4bb744938f623d29f38396165a1694fee78c3d32
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10376
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
It was reversed between Lenovo and non-Lenovo cases.
Change-Id: I52c3b928abda2851e97ec0b40b7da5c5191217f5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10374
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Apple is named Apple Inc in DMI but is "apple" in coreboot naming.
For other vendors we should follow similar pattern.
Change-Id: I7975b19faaf942c5bd44a704bcee994815499ceb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10372
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
This allow an easy creation of standalone "autoport pack".
Change-Id: Ibe9e38aa3b4bbd7260104e1c2a11630790ff4d2f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10370
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
This should be able to generate bootable ports for sandy/ivy, possible with
minor fixes. Howto is in readme.md
Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7131
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Change-Id: Ibc06b17f48f72d5f9931437ffce020023ece2445
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10328
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Follow up for commit b890a12, some contributions brought
back a number of FSF addresses, so get rid of them again.
Change-Id: I0ac0c957738ce512deb0ed82b2219ef90d96d46b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10322
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
We updated the source files, but not the precompiled results.
Change-Id: I49634409d01c8d7cf841944e01d36571ae66c0ac
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10296
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Because new images place the bootblock in a separate region from the
primary CBFS, performing an update-fit operation requires reading an
additional section and choosing a different destination for the write
based on the image type. Since other actions are not affected by these
requirements, the logic for the optional read and all writing is
implemented in the cbfs_update_fit() function itself, rather than
relying on the main() function for writing as the other actions do.
Change-Id: I2024c59715120ecc3b9b158e007ebce75acff023
Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10137
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Useful for autoport and other gfx-related developpement.
Change-Id: I1fc0952bc30ab15cd39a4f0c00649714dcf318f3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10276
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Currently, when the remote master branch of the board-status
repository changes between cloning and pushing, `git push origin`
fails.
This race condition happens quite often with REACTS testing commits at
the same time on different systems.
If that happens, just download the objects and refs from the
board-status repository and rebase the local changes on it. Try that
three times before exiting with an error message.
Change-Id: I628ebce54895f44be6232b622d56acbcc421b847
Helped-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Helped-by: Patrick Georgi <pgeorgi@google.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10262
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Fix up commit 1b6e7a67 (Updates to the board status script) forgetting
to put `echo` in front of the string.
Change-Id: I7d4dfcc62545dfee2073410ba47489318a9bf5c6
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10265
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Instead of writing to the source tree (which we should generally avoid),
copy the pre-generated files (from lex and yacc) to $(objutil). Adapt
include paths and rules so they're found.
Change-Id: Id33be6d1dccf9a1b5857a29c55120dcc8f8db583
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10252
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
While logical, make's handling of multiple targets in a rule isn't
intuitive, and was done wrong in cbfstool's Makefile.
%.c %.h: %.l encourages make to run the rule twice, once to
generate the .c file, once for the .h file. Hilarity ensues.
Change-Id: I2560cb34b6aee5f4bdd764bb05bb69ea2789c7d8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10251
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These names will skip the lint-whitespace tests.
Change-Id: If4ac1f8e11fd0ac62f09696f2704477b6eb30046
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10212
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
add handling of PCI IDs for Broadwell-U/Wildcat Point LP,
using same functions as Haswell-U/Lynx Point LP
Change-Id: I1094cbdace3c73f0f85c2e27c676b877b1a04bfe
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/10209
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Our style discourages unnecessary typedefs, and this one doesn't gain
us anything, nor is it consistent with the surrounding code: there's
a function pointer typedef'd nearby, but non-opaque structs aren't.
BUG=chromium:482652
TEST=None
BRANCH=None
Change-Id: Ie7565240639e5b1aeebb08ea005099aaa3557a27
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Change-Id: I4285e6b56f99b85b9684f2b98b35e9b35a6c4cb7
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10146
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The cbfstool handling of new-style FMAP-driven "partitioned" images
originally disallowed the use of x86-style top-aligned addresses with
the add.* and layout actions because it wasn't obvious how they should
work, especially since the normal addressing is done relative to each
individual region for these types of images. Not surprisingly,
however, the x86 portions of the build system make copious use of
top-aligned addresses, so this allows their use with new images and
specifies their behavior as being relative to the *image* end---not
the region end---just as it is for legacy images.
Change-Id: Icecc843f4f8b6bb52aa0ea16df771faa278228d2
Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10136
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These new-style firmware images use the FMAP of the root of knowledge
about their layout, which allows them to have sections containing raw
data whose offset and size can easily be determined at runtime or when
modifying or flashing the image. Furthermore, they can even have
multiple CBFSes, each of which occupies a different FMAP region. It is
assumed that the first entry of each CBFS, including the primary one,
will be located right at the start of its region. This means that the
bootblock needs to be moved into its own FMAP region, but makes the
CBFS master header obsolete because, with the exception of the version
and alignment, all its fields are redundant once its CBFS has an entry
in the FMAP. The version code will be addressed in a future commit
before the new format comes into use, while the alignment will just be
defined to 64 bytes in both cbfstool and coreboot itself, since
there's almost no reason to ever change it in practice. The version
code field and all necessary coreboot changes will come separately.
BUG=chromium:470407
TEST=Build panther and nyan_big coreboot.rom and image.bin images with
and without this patch, diff their hexdumps, and note that no
locations differ except for those that do between subsequent builds of
the same codebase. Try working with new-style images: use fmaptool to
produce an FMAP section from an fmd file having raw sections and
multiple CBFSes, pass the resulting file to cbfstool create -M -F,
then try printing its layout and CBFSes' contents, add and remove CBFS
files, and read and write raw sections.
BRANCH=None
Change-Id: I7dd2578d2143d0cedd652fdba5b22221fcc2184a
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Commit-Id: 8a670322297f83135b929a5b20ff2bd0e7d2abd3
Original-Change-Id: Ib86fb50edc66632f4e6f717909bbe4efb6c874e5
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265863
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10135
Tested-by: build bot (Jenkins)
The rules didn't actually trigger to rebuild the parser.
Change-Id: Id51aaa9816b069204c119622d60f7b728b762cad
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10168
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
They're essentially collected on a stack before they're
parsed. So we push them backwards, then parse them in
the correct order.
Change-Id: Ibf29559389cd19f260d67bae8e0b5ef9f4f58d91
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10169
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Antonello Dettori