# OCP Delta Lake This page describes coreboot support status for the [OCP] (Open Compute Project) Delta Lake server platform. ## Introduction OCP Delta Lake server platform is a component of multi-host server system Yosemite-V3. Both were announced by Facebook and Intel in [OCP virtual summit 2020]. Delta Lake server is a single socket Cooper Lake Scalable Processor (CPX-SP) server. Yosemite-V3 has multiple configurations. Depending on configurations, it may host up to 4 Delta Lake servers (blades) in one sled. The Yosemite-V3 system is in mass production. Facebook, Intel and partners jointly develop Open System Firmware (OSF) solution on Delta Lake as an alternative solution. The OSF solution is based on FSP/coreboot/LinuxBoot stack. The OSF solution reached DVT exit equivalent status. ## Required blobs Delta Lake server OSF solution requires: - FSP blob: The blob (Intel Cooper Lake Scalable Processor Firmware Support Package) is not yet available to the public. It will be made public soon by Intel with redistributable license. - Microcode: Available through github.com:otcshare/Intel-Generic-Microcode.git. - ME binary: Ignition binary will be made public soon by Intel with redistributable license. - ACM binaries: only required for CBnT enablement. Available under NDA with Intel. ## Payload - LinuxBoot: This is necessary only if you use LinuxBoot as coreboot payload. U-root as initramfs, is used in the joint development. It can be built following [All about u-root]. ## Flashing coreboot To do in-band FW image update, use [flashrom]: flashrom -p internal:ich_spi_mode=hwseq -c "Opaque flash chip" --ifd \ -i bios --noverify-all -w From OpenBMC, to update FW image: fw-util slotx --update bios To power off/on the host: power-util slotx off power-util slotx on To connect to console through SOL (Serial Over Lan): sol-util slotx ## Firmware configurations [ChromeOS VPD] is used to store most of the firmware configurations. RO_VPD region holds default values, while RW_VPD region holds customized values. VPD variables supported are: - firmware_version: This variable holds overall firmware version. coreboot uses that value to populate smbios type 1 version field. - bmc_bootorder_override: When it's set to 1 IPMI OEM command can override boot order. The boot order override is done in the u-root LinuxBoot payload. - systemboot_log_level: u-root package systemboot log levels, would be mapped to quiet/verbose in systemboot as that is all we have for now. 5 to 8 would be mapped to verbose, 0 to 4 and 9 would be mapped to quiet. - VPDs affecting coreboot are listed/documented in src/mainboard/ocp/deltalake/vpd.h. ## Working features The solution is developed using LinuxBoot payload with Linux kernel 5.2.9, and [u-root] as initramfs. - SMBIOS: - Type 0 -- BIOS Information - Type 1 -- System Information - Type 2 -- Baseboard Information - Type 3 -- System Enclosure or Chassis - Type 4 -- Processor Information - Type 7 -- Cache Information - Type 8 -- Port Connector Information - Type 9 -- PCI Slot Information - Type 11 -- OEM String - Type 16 -- Physical Memory Array - Type 17 -- Memory Device - Type 19 -- Memory Array Mapped Address - Type 32 -- System Boot Information - Type 38 -- IPMI Device Information - Type 41 -- Onboard Devices Extended Information - Type 127 -- End-of-Table - BMC integration: - BMC readiness check - IPMI commands - watchdog timer - POST complete pin acknowledgement - Check BMC version: ipmidump -device - SEL record generation - Converged Bootguard and TXT (CBnT) - TPM - Bootguard profile 0T - TXT - SRTM - DRTM (verified through tboot) - unsigned KM/BPM generation - KM/BPM signing - memory secret clearance upon ungraceful shutdown - Early serial output - port 80h direct to GPIO - ACPI tables: APIC/DMAR/DSDT/EINJ/FACP/FACS/HEST/HPET/MCFG/SPMI/SRAT/SLIT/SSDT - Skipping memory training upon subsequent reboots by using MRC cache - BMC crash dump - Error injection through ITP - Versions - Check FSP version: cbmem | grep LB_TAG_PLATFORM_BLOB_VERSION - Check Microcode version: cat /proc/cpuinfo | grep microcode - Devices: - Boot drive - All 5 data drives - NIC card - Power button - localboot - netboot from IPv6 - RAS (SMI handlers not upstreamed) - EINJ/HEST - error injection through ITP - memory error handling - PCIe error handling - PCIe live error recovery (LER) ## Stress/performance tests passed - OS warm reboot (1000 cycles) - DC reboot (1000 cycles) - AC reboot (1000 cycle) - Mprime test (6 hours) - StressAppTest (6 hours) - Ptugen (6 hours) ## Performance on par with traditional firmware - coremark - FIO - Iperf(IPv6) - Linpack - Intel MLC (memory latency and bandwidth) - SpecCPU - stream ## Other tests passed - Power - Thermal - coreboot address sanitizer (both romstage and ramstage) - Intel selftest tool (all errors analyzed; applicable errors clean) ## Known issues - HECI access at OS run time: - spsInfoLinux64 command fail to return ME version - ptugen command fail to get memory power - CLTT (Closed Loop Thermal Throttling, eg. thermal protection for DIMMs) - ProcHot (thermal protection for processors) ## Feature gaps - flashrom command not able to update ME region - ACPI BERT table - PCIe hotplug through VPP (Virtual Pin Ports) - RO_VPD region as well as other RO regions are not write protected - Not able to selectively enable/disable core ## Technology ```eval_rst +------------------------+---------------------------------------------+ | Processor (1 socket) | Intel Cooper Lake Scalable Processor | +------------------------+---------------------------------------------+ | BMC | Aspeed AST 2500 | +------------------------+---------------------------------------------+ | PCH | Intel Lewisburg C620 Series | +------------------------+---------------------------------------------+ ``` [OCP]: https://www.opencompute.org [OCP virtual summit 2020]: https://www.opencompute.org/summit/virtual-summit/schedule [flashrom]: https://flashrom.org/Flashrom [All about u-root]: https://github.com/linuxboot/book/tree/master/u-root [u-root]: https://u-root.org/ [ChromeOS VPD]: https://chromium.googlesource.com/chromiumos/platform/vpd/+/master/README.md