/*
 * This file is part of the libpayload project.
 *
 * Copyright (C) 2008 Advanced Micro Devices, Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <libpayload.h>
#include <arch/rdtsc.h>

static unsigned int cpu_khz;

/* Calculate the speed of the processor for use in delays */

void get_cpu_speed(void)
{
	unsigned long long start, end;

	/* Set up the PPC port - disable the speaker, 
	 * enable the T2 gate */
	
	outb((inb(0x61) & ~0x02) | 0x01, 0x61);

	/* Set the PIT to Mode 0, counter 2, word access */
	outb(0xB0, 0x43);

	/* Load the counter with 0xFFFF */
	
	outb(0xFF, 0x42);
	outb(0xFF, 0x42);

	/* Read the number of ticks during the period */

	start = rdtsc();
	while(!(inb(0x61) & 0x20));
	end = rdtsc();

	/* The clock rate is 1193180 Hz
	* the number of miliseconds for a period
	* of 0xFFFF is 1193180 / (0xFFFF * 1000)
	* or .0182.  Multiply that by the number of 
	* measured clocks to get the khz value 
	*/

	cpu_khz =
		(unsigned int ) ((end - start) * 1193180U / (1000 * 0xFFFF));
}

/* Global delay functions */

static inline void _delay(unsigned int delta)
{
	unsigned long long timeout = rdtsc() + delta;
	while (rdtsc() < timeout);
}

void ndelay(unsigned int n)
{
 	_delay(n * cpu_khz / 1000000);
}

void mdelay(unsigned int m)
{
	_delay(m * cpu_khz);
}

void delay(unsigned int s)
{
	_delay(s * cpu_khz * 1000);
}