No description
Find a file
Daniel Kang 029069960e mb/google/volteer: Change default camera power GPIO to 0
The default GPIO values for camera power were set as 1 so the LED was
turned on by default when the board is powered on.
This status is kept until the camera is probed then being turned off.
So the LED is turned on for a few seconds during the boot up.

By setting the default power to 0, the LED is lit only when camera
is turned on for probing and this should be just a blink.

BUG=b:167635396
BRANCH=none
TEST=Build and boot volteer board. Monitor camera privacy LED
and check it is not lit more than 0.5 seconds.

Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: Ic7df391aa512daafe6e1ce49e9222b90e17ad806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45058
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-29 23:09:49 +00:00
3rdparty Update amd_blobs submodule to upstream master 2020-09-17 19:46:18 +00:00
configs mb/emulation/qemu-i440fx: Remove TRACE=y from test build 2020-09-26 23:06:43 +00:00
Documentation doc/mb/ocp: update deltalake server documentation 2020-09-28 09:37:57 +00:00
LICENSES drivers: Use SPDX identifiers 2020-05-25 22:19:21 +00:00
payloads libpayload: Fix file permissions 2020-09-27 13:12:33 +00:00
src mb/google/volteer: Change default camera power GPIO to 0 2020-09-29 23:09:49 +00:00
tests device/dram: Add method for converting MHz to MT/s 2020-09-16 03:24:50 +00:00
util util/intelp2m/apl: Remove unused plat-spec function 2020-09-28 15:44:23 +00:00
.checkpatch.conf .checkpatch.conf: Ignore a few more warnings 2018-08-13 12:23:24 +00:00
.clang-format lint/clang-format: set to 96 chars per line 2019-06-13 20:14:00 +00:00
.editorconfig Add .editorconfig file 2019-09-10 12:52:18 +00:00
.gitignore util: update .gitignore to ignore spd_tools binaries 2020-09-02 07:17:55 +00:00
.gitmodules 3rdparty: Add submodule intel-sec-tools 2020-09-09 13:08:25 +00:00
.gitreview
AUTHORS AUTHORS, util/: Drop individual copyright notices 2020-05-09 21:21:32 +00:00
COPYING
gnat.adc treewide: Remove "this file is part of" lines 2020-05-11 17:11:40 +00:00
MAINTAINERS MAINTAINERS: Update soc/mediatek maintainership 2020-08-26 07:35:21 +00:00
Makefile build system: Rely on xcompile for HOSTCC and HOSTCXX 2020-07-08 08:53:46 +00:00
Makefile.inc sconfig: Switch to getopt 2020-09-18 17:50:00 +00:00
README.md README.md: Remove link to deprecated wiki 2019-11-16 20:39:55 +00:00
toolchain.inc Remove MAYBE_STATIC_BSS and ENV_STAGE_HAS_BSS_SECTION 2020-05-26 15:04:08 +00:00

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.